Large manufacturing facility located in central Evansville has immediate openings for 2nd and 3rd shift maintenance techs. This is a TEMP TO HIRE position, with candidates going through a resume send and interview process before being hired on. Three years experience in maintenance is preferred, along with some experience in a manufacturing environment. If you have applicable production maintenance experience and are looking for a great opportunity to join a strong company, APPLY TODAY!

Pay: $20.00-$28.00/hr. based on experience. At least some prior maintenance experience is required to be considered.

Shift:

• 2nd Shift: Mon-Fri, 3:00 PM-11:30 PM
• 3rd Shift: Sun-Thurs 11:00PM-7:30AM
• Overtime as needed

What You'll Do:

• Repair and maintain plant and production equipment
• Troubleshoot mechanical and electrical issues
• Perform preventive maintenance (TPM)
• Install, modify, and fabricate equipment
• Follow all safety procedures, including Lockout/Tagout
• Support equipment uptime and production efficiency

Qualifications:

• High School Diploma or equivalent
• 3+ years of maintenance experience
• Manufacturing experience preferred
• Ability to use electrical testing equipment (multimeters, circuit testers)
• Strong problem-solving and communication skills

#nowhiring

Select Staffing has a great opportunity for a Electronics RF Technician within a electronics manufacture in Chatsworth, CA.

Pay: $21.00 – $30.00 DOE

Hours: 7AM – 3:30PM

Monday to Friday

Role Description

This is a full-time, on-site role for an Electronics RF Technician. You will be a proactive, hands-on team player responsible for testing, tuning, and troubleshooting complex digital, analog, and RF circuitry down to the component level.

• Support the production line by performing electronic testing on units, sub-assemblies, and customer returns (RMAs).
• Operate complex test equipment including Oscilloscopes, Spectrum Analyzers, Signal Generators, and Network Analyzers.
• Test, tune, and troubleshoot RF Optical Fiber units, isolating technical issues to the specific component level.
• Perform precision rework, soldering, and assembly of optical components such as fiber cables, lasers, and photodiodes.
• Conduct Environmental/ESS testing (spanning -40C to 80C) and meticulously log data for analysis.
• Provide technical assistance to Engineering for out-of-box failures and help set up or modify new product test stations.

Minimum Qualifications:

• Strong foundational knowledge of Electrical/Electronics principles and RF circuitry.
• Proven experience troubleshooting digital and analog systems to the component level.
• Ability to operate high-level test equipment (Network Analyzers, Spectrum Analyzers, etc.) and understand intermodulation/noise measurements.

#nowhiring

Production facility located in central Evansville, IN is seeking Research Technicians for their first shift operations. This is a TEMP TO HIRE role with competitive pay and great benefits once converted. Candidates with strong experience may be considered for other senior roles. This position is lab based in a climate-controlled environment. Technicians do work with dangerous chemical compounds and will be required to wear a full-face respirator at times during testing of compounds. Prior experience in a production laboratory setting is required for this role. If you are looking for a great opportunity to start a new career with an amazing company and believe you meet the requirements to be successful in the role, APPLY TODAY!

About the job:

The Research Technician is responsible for supporting testing needed to develop and formulate new products. They also perform testing on new raw materials. The Research Technician may provide any necessary technical support to various other departments in addition to any other tasks their primary supervising chemist or Lab Manager requires.

Shift Details:  

1st Shift Monday – Friday 7:00am-3:30pm (One hour lunch – 30 mins on the client)

Pay Details: 1st shift $19.00 – Candidates with strong experience may be considered for other senior roles with corresponding increases in pay rate.

#nowhiring

Yale Electric Forklift Driver – Spring Hill, TN

ResourceMFG is hiring experienced Yale Electric Forklift Drivers in Spring Hill, TN!

Pay: $20.33 – $21.55/hour

Responsibilities: • Operate a Yale Electric Forklift safely and efficiently

• Load and unload trailers

• Move materials throughout the warehouse

• Pick, pack, and stage orders

• Perform inventory transactions and scanning

• Inspect products for damage

• Maintain a clean and safe work environment

Requirements: • 1+ year of Yale Electric Forklift experience within the last 3 years

• Warehouse experience preferred

• Ability to lift up to 50 lbs.

• Ability to stand, bend, twist, reach, and work in a fast-paced environment

• Strong attention to detail and safety

• Reliable transportation and excellent attendance

Join a team-oriented warehouse environment with competitive pay and long-term opportunities.

Apply today!

#NowHiring #ForkliftDriver #WarehouseJobs #SpringHillTN #ResourceMFG #HiringNow

Hiring NOW!

Machine Operator in Manchester, TN 

SWING Shift

Temp to Hire Opportunity! ***Once a month, 7 days off straight without missing a paycheck!! ***

Location: Manchester

Pay rate: $18/hr.

Looking for a New Job with lots of time off?

Work Schedule:

• Rotating Swing Shift working both Days and Nights
• 6:00a-6:30p / 6:00p-6:30a
• 14 shifts a month
• 7 consecutive days off EVERY month without skipping a pay check!
• Work schedule provided for the full calendar year

Job summary:

• Lifting, bending and stair climbing may be necessary
• Basic computer use
• Standing for up to 12 hours to load machines and remove products from machines.
• Forklift operation
• Must learn paperwork associated with daily task

As a ResourceMFG Associate We Offer You:

• Weekly pay
• Medical/Dental Plans Available
• Free Online Education
• Unlimited Referral Bonuses
• Free on-site gym
• On-site Nurse Practitioner
• On-site Chiropractor
• Incentive raise based off Attendance
• Advancement opportunities

#nowhiring

Operator: The mailer operator plays a critical role in the manufacturing process, ensuring that the equipment runs smoothly, meeting production goals, and maintaining high levels of safety and quality.

Work on 1st shift from 7am to 3pm M-F for training only then move to assigned shift.

Shifts Open:

• 2nd shift: M-F 3PM-11PM $22/hr
• 3rd Shift: M-F 11PM-7AM $23/hr
• Rotating schedule (7AM-7PM) $21/hr

Responsibilities: The operator is responsible for the entire process of the operation and must ask for guidance or clear instructions if any issue or concern arises beyond their scope

Various Shifts: Packer Rotating schedule (1) : 7am-7pm $18/hourPacker Rotating schedule (1): 7pm-7am $19/hourGeneral Labor (1) 1st shift schedule: M-F 7am-3pm $18/hourPacker (2) and Catcher (2) 2nd shift schedule: M-F 3pm-11pm $19/hourPacker (3) 3rd shift schedule: M-F 11pm-7am $20/hourResponsibilities:Duties include inspecting product, properly labeling, following QC requirements, packing rolls into bags, placing on cart, and taking product to assigned bay. All production positions require 95% cotton clothing, steel toed boots, safety glasses,

Powder Blending

ResourceMFG is Now Hiring Manufacturing Associates

ResourceMFG is seeking dependable Manufacturing Associates in Ogden, UT. This is a great opportunity to work in a powder products manufacturing facility with competitive pay, weekly paychecks, and a schedule that provides every other weekend off.

Pay

$20.00 per hour

Shift

Day Shift: 7:00 AM – 7:30 PM

Schedule: 2-2-3 rotating schedule

Job Responsibilities

• Fulfill daily production demands in a powder products manufacturing facility as directed by the production schedule and/or shift lead.
• Perform basic setup, loading, and operation of production equipment.
• Understand raw ingredient setup and blending processes to create finished products.
• Follow all safety, quality, and production procedures.
• Assist with general manufacturing and production duties as needed.

Physical Requirements

• Ability to perform mild to moderate lifting.
• Ability to work in a manufacturing environment and remain on your feet throughout the shift.

Benefits

• Weekly pay every Friday
• Every other weekend off
• Overtime opportunities available
• Competitive starting pay

#nowhiring

Able to read and understand a manufacturing formulas

• Minimum 6 months in manufacturing environment
• Must have strong work ethic
• Detail oriented
• Able to rely on instructions and per-established guidelines to perform the functions of the job

The Production Expeditor works closely with Production Planning and Operations to ensure shop orders move efficiently through manufacturing processes and are completed on schedule.

This role tracks production progress, coordinates material availability, identifies bottlenecks, and communicates status updates across departments.

Key Responsibilities

Monitor and track shop orders through assembly, inspection, testing, rework, and final assembly.

Coordinate with Production, Warehouse, and Supply Chain teams to ensure materials, kits, documentation, and resources are available for scheduled builds.

Identify production delays, shortages, and bottlenecks and escalate issues to support on-time completion.

Expedite movement of materials and work-in-process between departments.

Maintain and communicate accurate shop order status, shortages, and expected completion dates.

Assist with ERP transactions and production documentation as needed.

Support production priorities while ensuring compliance with quality, safety, ESD, and traceability

Requirements

High School Diploma or GED required.

1-3 years of manufacturing, production control, planning, scheduling, expediting, or related experience.

Experience in an electronics manufacturing environment preferred.

Strong communication, organization, and problem-solving skills.

Proficiency in Microsoft Excel, including sorting, filtering, pivot tables, and VLOOKUPs.

Experience with ERP/MRP systems preferred.

ResourceMFG NOW HIRING Pick/Packers 

Location: Lafayette, Indiana

Shift: Day 6:00 am – 4:00 pm or Evening 4:00 pm – 2:00 am

Pay Rate: $16 – $17 per hour

This position is responsible for a variety of warehouse tasks, including but not limited to picking, packing, forklift operations, receiving operations, cycle counts of inventory. The position requires the highest level of accuracy due to customer expectations. This position will be handling/sorting of parts into racks or containers throughout the day.

We Require Our Customers to Offer:

• Safe and clean work environment
• Employee focused workplace
• Safety programs and training

As a ResourceMFG Production Associate We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

Earn $16.00/Hour | 1st Shift | Manufacturing Experience Required

Ready to put your manufacturing skills to work with a growing company? We are hiring experienced Press Operators for a metal fabrication and welding facility. If you’re dependable, safety-focused, and looking for a long-term opportunity, we want to hear from you!

Schedule

1st Shift: Monday – Thursday
5:00 AM – 3:30 PM

Enjoy a three-day weekend every week!

Pay

 $16.00 per hour

Press Operator Responsibilities

• Operate press machines safely and efficiently
• Perform quality inspections to ensure parts meet specifications
• Complete machine checks and monitor production output
• Record production data and complete required paperwork
• Maintain a clean and organized work area
• Assist with additional production duties as needed

Why Join Our Team?

• Weekly Pay – Get Paid Every Friday!
• Medical Benefits Available
• Career Growth Opportunities
• FREE Online College Courses
• Stable Full-Time Schedule
• Supportive Team Environment

Qualifications

• Previous manufacturing or machine operating experience required
• Prior press operator experience preferred
• Ability to work overtime as needed
• Ability to lift up to 40 pounds regularly
• Strong attention to detail and quality standards
• Ability to multitask and cross-train in multiple areas
• Reliable attendance and strong work ethic

#nowhiring

Apply Today!

Don't miss this opportunity to join a respected manufacturing team. Positions are filling quickly, so apply now and start your next career move!

Production Associates Wanted!

No Experience Necessary

12hr shifts, Days available

Great Pay, Safety and Benefits

Start your next job with ResourceMFG, where 8 out of 10 employees say it's a great place to work.

“I like working with ResourceMFG because they have a lot of job opportunities!” ResourceMFG Associate, Moses

We Require Our Customers to Offer:

• Safe and clean work environment
• Employee focused workplace
• Safety programs and training

As a ResourceMFG Associate We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

Job Requirements

• Trainable job opportunity where experience is not required
• Attention to detail
• Gripping, grasping, twisting, lifting
• Manual labor
• 5:45a-6p
• 2-2-3 rotating shift
• Pay Rate $16hr

Job Responsibilities

• Follow safety guidelines
• Follow standard work instructions as assigned
• Perform hands-on tasks
• Lift up to 50lbs, stand, bend, and reach

Yamaha Manufacturing

Location: Newnan, GA

Company: Yamaha

Positions: Assembly

Shifts: 1st, 6:45am – 2:30pm

Pay Rates

1st Shift: $18.00/hour

2nd Shift: $19.00/hour

Job Description

Yamaha is hiring motivated and reliable team members for Assembly and Loading positions in a fast-paced manufacturing environment. This role involves hands-on work to support production and shipping operations.

Responsibilities

Assembly of Yamaha products and components

Loading and moving materials as required

Standing for extended periods (up to 10+ hours on some days)

Lifting and handling heavy materials safely

Following safety and quality standards

Requirements

Ability to lift heavy materials

Ability to stand on your feet for long shifts

Reliable attendance and strong work ethic

An Agriculture Manufacturing Associate operates and maintains machinery used in processing, packaging, and shipping agricultural products while ensuring strict compliance with safety and quality standards.

Key Responsibilities

·        Machine Operation: Set up, run, and shut down specialized agricultural processing, sorting, and packaging machinery.

·        Quality Control: Inspect raw materials and finished products to ensure they meet company and USDA quality guidelines.

·        Sanitation & Safety: Clean and sanitize equipment and work areas according to food safety regulations and OSHA standards.

·        Inventory Management: Load, unload, and stage raw agricultural materials or packaged goods using forklifts or pallet jacks.

·        Routine Maintenance: Perform basic preventive maintenance and clear minor equipment jams or malfunctions.

·        Documentation: Keep accurate logs of production yields, machine runtimes, and safety checks.

Qualifications & Skills

·        Experience: 1+ years in manufacturing, warehouse, or agricultural environments preferred (but not required).

·        Technical Skills: Ability to operate basic machinery and mechanical tools; forklift certification is a strong plus.

·        Physical Stamina: Capable of lifting up to 50 lbs, standing for long periods, and working in varying temperatures.

CNC Machinist – Part time

Are you semi-retired but still want to work part time. Flexible work schedule. Oil & Gas company is Katy area seeking part time CNC machinist.

• Be able to set-up a manual or CNC machine with minimal assistance. 
• Read, interpret drawings, and use this information to set up the machine.
• General understanding of quality measurements of produced parts. This includes simple devices such as calipers, tri-mics, ring gauges, and measuring equipment.
• Create CNC programs for CNC Machines using CAD/Cam software.
• Edit existing CNC programs to adjust to changes in performance.
• Create tooling setup sheets for the programs generated
•  Inspects machines for general wear and tear, oil leaks, and general maintenance functions.
• Flexibility to train on and operate several different types of equipment
• CAD/CAM software training (preferably CREO software)
•  Machining operations and functions of CNC machine tools
• Follow company HSE guidelines at all times, attend and actively participate in HSE training exercises.
• General machining understanding including operations, drawings, and programing.

ResourceMFG is seeking a Die/Mold Setter to join our manufacturing team on a weekend shift schedule. This position is ideal for candidates with manufacturing experience who are looking for a full-time weekend opportunity.

Schedule

• Training: Monday-Thursday, 5:00 AM – 3:30 PM
• Regular Schedule: Friday-Sunday, 5:00 PM – 5:30 AM

Position Summary The Die/Mold Setter is responsible for setting, changing, and maintaining dies and molds to support production requirements while ensuring quality, safety, and efficiency standards are met.

Key Responsibilities

• Set up and change dies and molds according to production schedules
• Verify proper installation and alignment of tooling
• Troubleshoot setup and tooling issues to minimize downtime
• Perform routine inspections and preventative maintenance on molds and dies
• Work closely with operators, maintenance, and production teams
• Follow safety, quality, and company procedures at all times
• Maintain accurate setup and production documentation

Welder – 1st Shift

White Bear Lake, MN Monday-Friday | 6:00 AM – 2:30 PM $24.00 – $27.00+ per hour, depending on experience

Put Your Welding Skills to Work Building Heavy Equipment

We are seeking an experienced Welder to join a growing manufacturing team in White Bear Lake, MN. This position offers a stable first-shift schedule, competitive pay, and the opportunity to contribute to the production of high-quality heavy equipment components.

If you take pride in your craftsmanship, have strong blueprint-reading abilities, and consistently produce quality welds, we encourage you to apply. Based on the attached job description.

Key Responsibilities

• Read and interpret blueprints, drawings, and specifications to determine weld locations and assembly requirements.
• Perform MIG and position welding on heavy equipment components according to production specifications.
• Review production priorities and daily work assignments with supervisors and production leads.
• Grind, deburr, and polish welded components to ensure quality finished products.
• Inspect completed welds to verify compliance with company and industry quality standards.
• Perform repair welding and rework when necessary.
• Utilize barcode scanners and computer systems to track production and labor activities.
• Identify and communicate safety, tooling, equipment, and quality concerns.
• Maintain welding qualifications and certifications as required.
• Support additional manufacturing and production activities as assigned.

Qualifications

Required

• Technical degree, diploma, certificate, or equivalent training in Welding.
• Experience performing MIG welding in a manufacturing environment.
• Ability to read and interpret blueprints and weld symbols.
• Experience performing position welding.
• Strong attention to detail and commitment to quality workmanship.
• Basic computer skills.
• Strong troubleshooting and problem-solving abilities.
• Ability to pass a hands-on weld test and maintain welding certifications.

Physical Requirements

• Ability to lift up to 50 pounds as needed.
• Ability to stand, walk, bend, and work throughout an entire shift in a manufacturing environment.
• Ability to work safely around manufacturing equipment and materials.

Schedule & Compensation

• Shift: Monday-Friday, 6:00 AM to 2:30 PM
• Location: White Bear Lake, MN
• Pay: $24.00-$27.00+ per hour based on experience
• Overtime: Opportunities may be available based on production needs
• Type: Contract-to-Hire Opportunity

Why Apply?

• Consistent first-shift schedule
• Competitive pay based on experience
• Opportunity to work with large-scale, engineered equipment
• Stable manufacturing environment
• Long-term career growth potential through contract-to-hire employment

If you are a skilled welder looking for a rewarding opportunity with a respected manufacturing employer in the White Bear Lake area, apply today!

Repacker

$15/hr

M-Fri8am-5pm

This position is temporary

1 week of work

• Manually load and unload freight.
• Efficiently stack and store the merchandise in the appropriate area
• Pick orders for shipment and assemble various types of merchandise to be shipped
• Check or count freight for accuracy and/or damage and infestation
• Maintain a clean, neat, order work area
• Assist in maintaining the security of the warehouse
• Conduct operations in a manner, which promotes safety
• Participate in physical inventories, as needed
• Perform labeling, sorting, wrapping, packing, and repacking
• associate is frequently required to sit; hear or talk use close vision; use hands to grasp, handle or feel objects; and type and manipulate controls
• required to use distance vision, stand, kneel, or crouch lift up to 80 lbs

Machine Operator Needed! 

• Location: Manchester, TN
• Pay: $16
• 1st shift: 6am-4:30pm  (6am-6pm)

All associates can take advantage of the following perks:

• Temp to hire positions
• Must be available to work Overtime, Double time and Weekends when needed 
• 10-12 hour shift
• Climate controlled facility
• On-site nurse and chiropractor at a $10 charge for associate and immediate family
• On-site hairdresser at a reduced cost
• Quarterly giveaways
• Free on-site gym 
• Weekly pay
• FREE online education

The Best Manufacturing Jobs. Start with ResourceMFG.

As a ResourceMFG Associate

• Get Paid Every Friday with Weekly Pay
• 100% Company Paid Online Education Courses Available
• Health, Dental and Vision Insurance
• Cell Phone Plan Discounts
• Career Opportunity
• Hiring Immediately 

Also take advantage of free education through Penn Foster!

#nowhiring

Machine Operator Requirements: Must have good attendance Must be able to work mandatory overtime Must be able to sit/stand for up to 12 hours Closed toe and back shoes required Must wear required PPE when necessary 

Power Tool Assembler Position We are seeking a reliable, detail-oriented individual to join our production team as a Power Tool Assembler.

This role requires strong hand dexterity, the ability to work in a fast-paced environment, and the discipline to meet hourly production targets. The work is repetitive and requires standing for the full duration of the shift.

Key Responsibilities

• Assemble power tools according to established specifications and quality standards

• Maintain accuracy and consistency in a high-volume production line

• Meet or exceed hourly production goals

• Follow safety procedures and maintain a clean work area

• Perform repetitive tasks with precision and focus

Requirements

• Strong hand-eye coordination and manual dexterity

• Ability to thrive in a fast-paced, target-driven environment

• Comfortable performing repetitive tasks for extended periods

• Ability to stand for 8 hours

• Dependable attendance and punctuality

Shift & Schedule

• Monday–Friday• 7:00 AM – 3:30pm Compensation

• Base pay $18

Human Resources Clerk (Temporary)

White Bear Lake, MN Monday-Friday | 7:00 AM – 3:30 PM $23.00 – $25.00+ per hour, depending on experience

Are you an organized and detail-oriented administrative professional looking for an opportunity to support a busy Human Resources team? We are partnering with a well-established manufacturing organization in the White Bear Lake area that is seeking a Temporary Administrative Assistant to provide critical HR and office support. This is an excellent opportunity for someone who thrives in a fast-paced environment and enjoys working with people, systems, and administrative processes. Based on the responsibilities and qualifications outlined in the job description.

Position Overview

The Administrative Assistant will provide day-to-day support to the Human Resources department by assisting with employee documentation, data entry, recordkeeping, reporting, and general administrative functions. The ideal candidate will be highly organized, dependable, and comfortable maintaining confidential information.

Key Responsibilities

• Provide administrative and clerical support to the Human Resources team.
• Assist with employee documentation, filing, record maintenance, and data entry.
• Create, update, and maintain spreadsheets, reports, and tracking logs.
• Utilize HRIS and payroll systems, including ADP, to support HR processes.
• Prepare correspondence, forms, and reports using Microsoft Office applications.
• Support onboarding and other HR-related administrative activities.
• Maintain strict confidentiality when handling employee records and sensitive information.
• Collaborate with team members to ensure tasks are completed accurately and on schedule.
• Perform other administrative duties as assigned.

Qualifications

Required

• Previous Administrative Assistant, Office Assistant, Human Resources Assistant, or related office support experience.
• Experience utilizing ADP.
• Strong Microsoft Office skills, including Excel, Word, and Outlook.
• Excellent organizational skills and attention to detail.
• Strong verbal and written communication skills.
• Ability to manage multiple priorities and meet deadlines.
• Ability to maintain confidentiality and handle sensitive information professionally.

Preferred

• Prior experience supporting a Human Resources department.
• Experience working within a manufacturing or industrial environment.
• Experience utilizing SAP software.

Schedule & Compensation

• Shift: Monday-Friday, 7:00 AM to 3:30 PM
• Location: White Bear Lake, MN
• Pay: $23.00 to $25.00+ per hour, based on experience
• Assignment Type: Temporary assignment, approximately two months in duration
• Work Environment: On-site

If you are a dependable administrative professional with strong organizational skills and HR support experience, we encourage you to apply today! This is a great opportunity to gain valuable experience with a respected manufacturing organization while making an immediate impact on a busy Human Resources team.

Resource MFG has immediate openings for experienced MIG Welders in Union City! This is a temp to hire opportunity with a company that manufactures automotive lighting components, including headlamps, tail lamps, fog lamps, and other vehicle lighting products for the automotive industry.

Afternoon Shift 3:00pm – 11:00pm

Pay $18.00 – $22.00

Unlimited referral bonus

Basic Responsibilities and Job Duties:

• Utilize solvents, and high-pressure water blasters for industrial cleaning.Perform manual scraping and chipping to clean surfaces such as walls, hoses, windows, grates, lights, robots, etc.
• Execute minor maintenance as needed.Vacuum and wipes the interior and exterior of equipment.
• Clean building floors by sweeping, mopping, scrubbing or vacuuming, and shoveling.
• Perform other specialized paint booth cleaning tasks as required.
• Perform lock out/tag out of equipment for safe entry into energized areas of the paint shop.
• Perform safe entry into confined space areas needing to be cleaned.
• Perform general janitorial duties including office and restroom cleaning.
• Required QualificationsHigh school Diploma/GEDStand, kneel, and bend for long periods of time and reach within 6" of the ground for extended periods of time.
• Climb ladders and stairs without difficulty.
• Lift, carry and pull equipment weighing up to 75lbs. with assistance.
• Ability to pass a background check.
• bility to pass a drug testPush / Pull Heavy WeightsAbility to work in enclosed spaces
• PHYSICAL

Material Handler – Goodyear, AZ – Prologistix is Hiring!

Prologistix is seeking motivated Material Handlers to join a growing warehouse team in Goodyear, AZ! This is a great opportunity for candidates with warehouse and inventory experience who are looking for steady work and competitive pay.

Pay Rates:

• 1st Shift: $19.00/hour
• 2nd Shift: $21.00/hour ($19.00/hr + $2.00/hr shift differential)

Available Openings:

• 1st Shift
  • Monday-Friday
  • 8:00 AM – 4:30 PM
• 2nd Shift
  • Monday-Thursday
  • 11:30 AM – 10:00 PM

Job Duties:

• Receive and process incoming inventory
• Perform cycle counts and inventory audits
• Kitting and material preparation
• Use RF scanners to track inventory (preferred)
• Operate a Toyota sit-down forklift
• Maintain inventory accuracy and a safe work environment

Why Work with Prologistix?

• Weekly pay
• Benefits available
• Free online skills training
• Career growth opportunities

Apply today and start your next opportunity with Prologistix in Goodyear, AZ!

Qualifications:

• Warehouse experience preferred
• Forklift experience preferred (certification not required)
• RF scanner experience a plus
• Strong attention to detail and reliability
• Ability to work in a fast-paced warehouse environment

Important Information:

• All new hires will complete their first 2 days of training on 1st Shift (8:00 AM-4:30 PM).

Large Manufacturing Company is looking for a Production Line Mechanic.

Pay: DOE

Position Description

Install, maintain, and troubleshoot various production equipment including but not limited to Un-scrambler, Pacific Rotary Filler, inline Fillers, Norden Tube fillers, Resina-Cappers, Label Machines, inkjet Coders, Conveyors, Pumps with a sound knowledge of mechanical, pneumatic systems, hydraulic systems, electric and automation systems.

Essential Functions

Install, maintain, trouble-shoot, repair and rebuild un-scramblers, Fillers, Cappers, Crimpers, Label M/c, Inkjet Coders, Conveyors, and other packaging machines.

Perform line changeovers and set-ups based on production schedule and updates and validate set-up sheets.

Build transfer lines, connect pumps, and perform washout and sanitization of filling system by following company’s standard operating procedures.

Perform preventive maintenance and scheduled maintenance as per MP2 work orders. Reads, interprets the equipment manual, P& I diagram for major repairs and trouble shoots and order parts to maintain the inventory of critical spares.

Requirements:

5 years' experience working on liquid fill production lines in a fast-paced manufacturing environment.

Experience in alcohol filling is a plus.

Be familiar with Resina Cappers & labelers, rotary & in-line fillers, Hot Air Norden Tuber Fillers, Design A-Seal and Videojet Coders a plus.

#NOWHIRING

Production Worker / Machine Operator – Akron Area

Pay Rate: $16.00 – $18.00 per hour

Shift: Day Shift, Evening Shift, and Night Shift Available

Job Description

ResourceMFG is now hiring Production Workers / Machine Operators for a client in the Akron area. This is an excellent opportunity to join a growing manufacturing team with multiple shifts available and competitive pay.

In this role, you will operate production equipment, inspect products for quality, and support daily manufacturing operations while maintaining a safe and efficient work environment.

Benefits

• Medical, Dental, and Vision Insurance Benefits
• Weekly Pay
• Free Online Education
• A Dedicated Recruiter

Job Requirements

• Previous manufacturing or production experience preferred
• Ability to stand for extended periods
• Ability to lift up to 50 lbs. as required
• Strong attention to detail and commitment to quality
• Ability to perform repetitive tasks
• Basic math and measurement skills
• Ability to work in a fast-paced environment
• Reliable attendance and dependable transportation
• Ability to follow written and verbal instructions

#nowhiring

Production Associate

Pay: $16.00 per hour

Shift Available:

• Day Shift: 7:00 AM – 7:00 PM
• Night Shift: 7:00 PM – 7:00 AM

We are hiring Injection Mold Operators to join a growing manufacturing team. In this role, you will operate injection molding machines, inspect products for quality, and assist with packaging finished goods. Training is provided, making this a great opportunity for individuals looking to build manufacturing experience and grow their careers.

Benefits

• Medical, Dental, and Vision Insurance Benefits
• Weekly Pay
• Free Online Education
• A Dedicated Recruiter
• Overtime opportunities
• Training provided
• Career growth opportunities
• Safe and team-oriented work environment

Job Requirements

• Operate injection molding machinery safely and efficiently
• Inspect molded parts to ensure quality standards are met
• Trim, package, and label finished products as needed
• Monitor machine performance and report issues to supervisors
• Complete production and quality records accurately
• Previous manufacturing or injection molding experience preferred but not required
• Ability to stand, walk, and perform repetitive tasks throughout a 12-hour shift
• Strong attention to detail and commitment to quality standards

#nowhiring

Production Associate – Day Shift

Job Description

ResourceMFG is currently seeking Production Associates in Sharon Center, Ohio. This is a great opportunity for individuals looking to build manufacturing experience in a stable, team-oriented environment. Employees enjoy consistent full-time hours, competitive pay, and opportunities for growth within the company.

Shift: Day Shift (6:00 AM – 2:30 PM)

Pay Rate: $18.00 – $20.00 per hour

Benefits

• Weekly Pay
• Medical, Dental, and Vision Insurance Benefits
• Free Online Education
• A Dedicated Recruiter
• Long-term, career-minded opportunities
• Opportunity for career advancement
• Full-time schedule with 40 hours guaranteed
• Overtime opportunities available

Job Requirements

• Inspect products and parts to ensure quality standards are met
• Perform assembly and production duties as assigned
• Package finished products for shipment
• Follow work instructions and safety procedures
• Maintain a clean and organized work area
• Ability to stand, move, and work in a fast-paced manufacturing environment
• Strong attention to detail and reliability
• Previous manufacturing, production, assembly, or packaging experience is a plus

#nowhiring

Industrial Sewer

Shift time 8am to 4:30pm

Pay rate : 17.00 – 18.00

Does require to present resume and interview, requires 1 year min experience.

Position Summary

· Work with a variety of fabrics, including cotton, flannel, and nylon.

· Operate industrial sewing machine (single/ double/triple needle), overlock, binder, punch/rivet/tracker, walking foot.

· Sew from simple written instructions, patterns and assembly schematics.

· Check completed work visually for accuracy.

· Cross-train in other processes and willingness to work in all functions.

 Requirements

· Must be able to work with a variety of industrial sewing machines and fabrics.

· Must be able to read and follow sewing instructions in various formats.

· Must be able to sit for prolonged periods and lift the materials and finished products.

· Must be willing to learn different processes and work in other areas as needs dictate.

· Must have a good eye to review raw materials and finished products.

Requires min 1 year of experience industrial sewing, read and follow sewing instructions in various formats.

Production Associate

Schedule: Monday-Thursday, 6:00 AM-5:00 PM

4-Day Work Week

1-Hour Unpaid Lunch

Job Summary

We are seeking reliable Production Associates to support warehouse and manufacturing operations. Duties include packing, sorting, inspecting products, moving materials, and following work orders to ensure quality production standards are met.

Responsibilities

• Pack, sort, and prepare products for shipment.
• Follow work orders and production instructions.
• Inspect products for quality and accuracy.
• Move materials throughout the facility.
• Maintain a clean and safe work environment.
• Assist with general production and warehouse tasks.

Qualifications

• Production, warehouse, or manufacturing experience preferred.
• Ability to follow instructions and work independently.
• Strong attention to detail and reliability.
• Ability to stand, walk, lift, and perform repetitive tasks throughout the shift.

Preferred

• Sit-down forklift experience.
• Sewing experience.

Apply today to join a team-oriented company offering a consistent four-day work week.