ATTENTION Experienced CNC Machinist Set up
Now Hiring – 2nd Shift

Competitive Pay. Solid Benefits. Safe Workplace.

Senior CNC Machinist for production of aerospace parts in the city of Newbury Park, CA

As a ResourceMFG CNC Machinist Set up We Offer You:

• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!

Primary Responsibilities:

• With no supervision, must set-up, run, and inspect parts to drawing specifications using manual mills and lathes.

• Candidate is required to perform first article inspections and correct any discrepancies between part measurements and print requirements.

• Machinist must perform advanced set-up and fixturing of jobs.

• Candidate must have the ability to troubleshoot and rectify any problems.

• Senior machinist should be adept in all aspects of machining and assist other machinists as needed. 

Job Requirements:

• Education: high school diploma or equivalent.

• Years of Experience: 10+ years experience with Advanced Machining.

• Able to read, speak and understand the English language.

• Good verbal communications and reading skills.

• Must be able to read and understand English, and follow verbal and written instructions.

• Position requires the skill to read blueprints.

• Candidate must have complex understanding of measuring instruments, including calipers, standard and pitch micrometers, comparators, surface plates, test indicators, coordinate measuring machines etc.

• Machinist is required to have advanced knowledge of All Manual Machines and controls and adjust quickly to changing priorities.

• Must have a minimum of ten years experience.

Join the Fast-Growing Manufacturing Industry!
Now Hiring
2nd Shift
Machine Operator

Opportunity is Knocking! Great Pay. Friendly Workplace.

If you’re eager to kickstart your career with a top employer, your search ends right here! ResourceMFG is NOW HIRING Machine Operators to join our team. Enjoy competitive pay, good benefits, advancement opportunities and a workplace that prioritizes employee safety.

Apply with a company that truly cares and earned the “Safety Standard of Excellence” for the highest commitment to employee safety.

“I have had a great overall experience working with ResourceMFG.” ResourceMFG Associate, Jose

We Require Our Customers to Offer:

• Safe and clean work environment
• Employee focused workplace
• Safety programs and training

As a ResourceMFG Machine Operator We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan

Job Requirements

• Minimum 3 months relevant Machine Operator experience
• Attention to detail
• Able to use basic hand and power tools
• Basic math
• Mechanical aptitude
• Ability to identify problems
• Able to multi-task
• Ability to read ruler/tape measure

Job Responsibilities

• Follow safety guidelines
• Follow standard work instructions as assigned
• Perform hands-on tasks
• Lift up to 50lbs, stand, bend, and reach
• Maintain clean and organized workspace
• Troubleshoot equipment issues
• Ensure product meets customer specifications
• Meet production standards
• Work in a team environment
• Accurate recordkeeping and quality documentation
• Inspection of product

Working for ResourceMFG

If you’re looking for a job in manufacturing, ResourceMFG specializes in you! We are America’s largest staffing company with over 30 years in business, putting more than 24,000 people to work nationwide, each week. A company that treats you like family, we’re committed to providing equal opportunities to all, a healthy and safe work environment, fair pay and the tools to succeed and grow.

Machinists Needed In Paw Paw, MI

1st Shift, Up To 32.00 Per Hour

In this role, you will use Cincinatti CNC machines, similar to Haas; Programming experience required, editing, modifying and ability to read blueprints.

Benefits of a Machinist:

• 1st shift, 7am – 3:30pm
• Pay up to 32.00 per hour, based on experience
• Small, family owned business with long-standing reputation
• Once hired in, medical coverage is at 90%
• PTO and sick time
• Christmas bonuses – % of your salary

Duties of a Machinist:

• Understand machining, shop math, blueprint reading, sketches, drawings, manuals, specification
• Perform routine maintenance to machinery
• Program mills and lathes, setting tool registers, offsets, calculating requirements (basic math, geometry, and trigonometry)
• Set-up mills and lathes by installing and adjusting three and four jaw chucks, tools, attachments, collets, bushings, cams, gears, stops, stock and pushers
• Operating vertical mills, surface & OD grinders, boring mills, engine lathes, saws and drill presses 

Requirements: 

• Preferred – bring own small tools and tool box
• Able to meet deadlines
• Work individually and in a team environment
• Understand basic setups and working in a fast paced environment
• Blueprint, schematic reading and GD&T
• Mechanical knowledge, electrical wiring, hydraulics and pneumatics
• 1 – 3 years of machinist experience

One of the top leaders in Industrial Pump Servicing and Maintenance is looking to fill the following position Manual Machinist. All positions are 10 hour day shifts, with tons of overtime. If you have Manual Machinist experience or CNC Machinist experince and would like to learn Manual Machinist skills, APPLY NOW

• Manual Machinist – needs at least two years working experience with machining different types of metal. 

Pay 25.00-40.00 per hour based on experience

Shift 6am-4:30pm Monday-Friday

We Offer

• Medical, Dental, Vision 
• Weekly Pay and direct deposit
• Free Online Skills Courses
• and more…

• Steel toed boots required
• Heavy lifting up to 50 lbs may be required
• Willingness to work in team environment
• Ability to hold close tolerances
• Working knowledge of speeds and feeds
• Ability to work without supervision
• Ability to work overtime as needed

#rmfgindeed

#rmfgzip

CNC Mill Machinist Needed in Detroit Area!!

Location : Van Dyke & E Nevada St.

Pay: $23+ (Negotiable)

2nd Shift: 4:00p-3:00a

**Crane & Hilo experience is a plus CNC Machinist – Haas CNC machines, must have experience doing tool changes and editing programs. G & M code knowledge is needed.

Job Description: 

• Setup and operations of CNC Machining Centers
• G&M codes-Loading & Unloading of parts into fixtures for machining/metal removal purposes
• Inspections and Deburring
• Experience with editing tool compensations

Requirements:

• YOUR OWN TOOLS
• Steel Toes
• Good Math skills
• Ability to read precision instruments
• Ability to read drawing and/or prints
• Good attendance
• Reliable Transportation 

ResourceMFG is hiring CNC lathe machinists for a great client in Owasso.

Pay: $20+ depending on experience

Shifts Available:

• 1st shift – Monday-Thursday -6am-4:30pm
• 2nd shift: Monday-Thursday 4pm-2:30a (must train on days)
• Weekend shift: Fri-Sun 6am-6pm (must train on weekdays 6am-4:30pm first)

JOB DUTIES

• As a CNC lathe machinist your responsibilities include:
• Setting up and editing lathe machines running parts with close tolerances, special threads, etc.
• Inspecting parts for defects and verifying they meet specifications
• Maintaining production, quality, and data logs
• Adhering to company policies and safety regulations 

• Steel toe
• Must be able to read a tape measure
• 3-5 years experience preferred

NOW HIRING!! CNC Machinist – 1st Shift Great Opportunity in Clearwater, FL

About the position:

Operate CNC HAAS Milling machine, CNC Lathe Okuma 10 & Okuma 10 SS and Okuma 12 with OSB 300 L Control (Okuma 10SS and 12 running with sub spindle live tooling). Our machines are 3-Axis, 4- Axis and 5-Axis, working with aluminum, plastic and stainless steel to make simple parts.

Job Duties include, but not limited to:

• Set up and tear down a work order on a CNC Machine.

• Responsible for in process inspection (utilizing calipers, micrometers)

• Responsible for making adjustments to offsets, and program as needed to maintain tolerances.

• Must be able to work off of blueprints

• Must be able to accurately use shop math in checking parts.

• Perform basic maintenance to the machines (clean and maintain, no mechanical repairs – weekly and monthly coolant maintenance)

• Maintain the machine within the scope of its ability.

• You will be expected to help around the shop with deburring, tapping, etc. as needed to keep parts moving

• Maintain all paperwork associated with producing the part and maintaining company records.

Benefits of working with us:

• Health, Vision and Dental Insurance

• Holiday pay
  
• Weekly pay
• Long term job opportunities with stability
• 40 hours plus over-time when needed
  

Required experience & qualifications:

• Machining Technology certification from a technical school, Machinist certification from a CNC manufacturer (such as OKUMA or HAAS) or equivalent.

• A minimum of two-years of hands-on Machining Operating experience.

• Working knowledge of shop math (Algebra, Geometry and Trigonometry).

• Must know how to use calipers and micrometers

We have a direct hire opening for a CNC Machinist at a shop in Everett that specializes in precision machined aerospace, medical, and commercial parts and assemblies. This is a 2nd shift opening! 

• In this role, set up and operate CNC machines and machining centers to fabricate precision parts per engineering specifications without supervision.
• These close tolerance and complex parts are manufactured for avionics, aerospace hydraulics, and medical device items for imaging systems, biopsy instruments, and prosthetics.
• Parts are machined from Aluminum, Stainless Steel and Titanium as well as a wide range of plastics.

Direct Hire Opportunity – Be on our client’s payroll from DAY 1!

Salary and Shift Information:

• Pay: $32-$39/hour
• 2nd Shift: 3:20 pm-1:20 am, Monday-Thursday, with overtime on Friday as requested

Benefits of the CNC Machinist:

• Employer covers 95% of costs for employee medical, dental, and vision insurance and 50% for family coverage
• Simple IRA with company match
• Paid vacation
• 11 paid holidays, including the week off between Christmas and New Year’s

Job Duties of the CNC Machinist:

• Understand and set controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut
• Use tools such as edge finders, indicators, and probes to find machine work offsets
• Run parts that meet engineering specifications without supervision
• Read, understand, and interpret engineering and manufacturing drawings independently with your knowledge of GD&T
• Follow instructions on setup sheets without supervision
• Know optimal cutting techniques, speeds, and feeds
• Start and observe machine operation to detect malfunctions or out-of-tolerance machining and inform the lead person of discrepancies
• Verify conformance of finished workpieces to specifications using all measuring tools
• Recognize machine deviations versus cutter or holding problems and fix issues before informing the supervisor
• Thoroughly inspect first part run with high complexity
• Meet job standard times without supervision
• Ensure part count and data entry are accurate and correct consistently
• Accurately complete and maintain all paperwork
• Follow all safety guidelines established by the company, including proper use of safety equipment and relevant safety procedures
• Solve complex problems independently, as well as routine problems that occur
• Have a fluent understanding of G&M codes, and be able to edit or program on the shop floor
• Look for ways to reduce cycle times without being asked
• Optimize programs in collaboration with engineering and management
• Create machine tooling to support manufacturing and engineering

Job Requirements of the CNC Machinist:

• 4-5 years of experience as a CNC Machinist, using either mills or lathes
• Ability to make edits to CNC programs to correctly produce each part
• Ability to read and interpret engineering and manufacturing drawings to understand dimensions, tolerances, and specifications of the parts
• Strong working knowledge of GD&T
• Knowledge of optimal cutting techniques, speeds, and feeds
• Experience with ESPRIT CAD and CAM software for CNC programming (preferred)
• Understanding of G&M codes (preferred)

APPLY NOW!

Basic Function Fabricating parts for the prototype department. 1. Responsible for processing parts according to customer requirements. 2. Understand metal forming processes. 3. Understand various types of press brake set up’s. 4. Work with Quality Control, Laser and Press departments. 5. Understand how to read material technical data and drawings to determine material types, tools and gages needed. 6. Understands check concepts and inspects parts according to customer specs. 7. Accurately count and record production activity. 8. Use calipers, micrometers and height gages to perform accurate measurements per specific print and drawing tolerances. 9. Identify and communicate to management quality issues as they arise. 10. Interprets and follows supervisor’s report including priorities and start dates. 11. Understands and demonstrates the 6 core behavioral expectations: Communicative, Motivated, Dependable, Inquisitive, and Accountable. Experience Prior Fabrication and Machining experience. Skills Have solid understanding of metal fab concepts and process Must possess own tools Must possess the ability to use height gage and calipers, hand tools and press brake Must be able to interpret blue prints Must be able to regularly lift and move parts that may be heavy parts Great attention to detail and tolerance Should be honest, respectful and trustworthy Must possess effective written and verbal communication skills

NOW HIRING!! CNC Manual Machinist – 1st Shift Great Opportunity in Clearwater, FL

About the position:

 This position will set-up ,adjust and operate Sharpe Manual Lathe and Vertical Mill. We also have a CNC and Manual HAAS 10-inch chuck.

 Working with aluminum, plastic and stainless steel to make tooling, samples and parts that cannot be made in our CNC Equipment

 Job Duties include, but not limited to: 

• Study drawing specifications to determine dimensions and tolerances of finished workpiece, sequenceofoperations,and set-up requirements.
• Measure dimensions and reference points on material for machining.
• Select holding fixtures, cutting tools, attachments, accessories, and materials on machines.
• Set-up and operate machine and verify accuracy ofmachine settings or programmed control data.
• Fit and assemble parts into complete assembly.
• Install machined replacement parts in mechanisms, machines, and equipment, and test operation of unit to ensure functionality and performance.
• Observe all safety policies and procedures and operate in a safe manner. 

Benefits of working with us:

• Health, Vision and Dental Insurance

• Holiday pay
  
• Weekly pay
• Long term job opportunities with stability
• 40 hours plus over-time when needed

Required experience & qualifications:

• Machining Technology certification from a technical school, Machinist certification or equivalent.

• A minimum of two-years of hands on manual lathes and mill machining set up ADN operating experience. 

• Working knowledge of shop math (Algebra, Geometry and Trigonometry).

• Must know how to use calipers and micrometers

Now Hiring CNC Machinist in Adelanto!

Well known Manufacturing Company located in the City of Adelanto is searching for a CNC Machinist to join their awesome team!
Temp to Hire!

CNC Machinist Wage: $19 to $24/ hour

CNC Machinist Schedule: Monday – Friday 2:30 PM to 11:00 PM

Length: Direct Hire

CNC Machinist Responsibilities and Duties:

• Interpret engineering drawings, procedures to determine dimensions and tolerances of finished work pieces, sequence of operations and setup requirements.
• Preventative Maintenance of machines as well as troubleshoot production drawings.
• Liaise with management to identify areas for improvement.
• Within the scope of the job requirements, will be required to adhere and comply with all provincial and federal laws, the Company ISO Quality Program and procedures, Company policies and Safety and Environmental Regulations.
• Verify dimensions of machined parts or tooling using micrometers, Vernier’s, calipers, height gauges or other specialized measuring instruments
• Maintain inspection records and complete inspection reports.
• Other duties as assigned by Manager.

Our customer offers:

• Safe & Clean environment.
• Employee focused environment.
• Good pay & benefits.
• Full time to regular positions.
• Safety Programs and training!

As A ProLogistix Associate, we offer you:

• FREE Online education.
• Weekly Pay checks
• 401k benefits
• Health Benefits
A Personnel work Recruiter to help with job searches and assistance at work.

Requirements:
• Minimum 3-5 years conventional lathe.
• Minimum 3-5 years conventional mill.
• Graduate from a technical school or equivalent

CNC Mill Machinist

Mori Seiki / Fanuc Controls

Globally branded manufacturer of down hole support tooling is adding a skilled Mori Seiki Mill Machinist to the team.  In this role you will be responsible for milling work and some turn-downs, threading and other piece duties as needed.

For you – 

• $25 – 30 Depending on experience
• 1st Shift – 6am – 2:30, Overtime as needed
• Fantastic shop
• Wonderful benefit package upon hire

And

While working with ResourceMFG Employbridge you will have access to

• Weekly Pay and Direct Deposit
• Access to Medical, Dental, Vision
• Unlimited Referral Bonuses

Client is looking for 3 Years or More:

• Mori Seiki Mill - Highly Desired
• CNC Lathe - Desirable
• Fanuc Controls
• Mostly Mill Work
• Threading - ACME, Buttress, Standard, Tapered, desired
• Engineered Prints and Drawings
• G Code
• Canned Cycles
• Precision Measuring Tools

IMMEDIATE OPENINGS!
CNC Machinist
1st Shift

Great Company. Competitive Pay. Committed to Your Success & Safety!
Looking for a CNC Machinist job offering a worker-friendly atmosphere where competitive pay, good medical benefits, and your safety are priority number one? Your search has ended. Remedy is standing by, ready to find you the right fit!

Submit your application today! Discover for yourself why ResourceMFG associates are 3x happier working for us than for our competition.

“At ResourceMFG, everyone is really helpful, and the employees are not just numbers on a board.” ResourceMFG Associate, Sidney

We Require Our Customers to Offer:

• Safe and clean work environment
• Employee focused workplace
• Safety programs and training

As a CNC Machinist We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

Job Responsibilities

• Follow safety guidelines
• Follow standard work instructions as assigned
• Set up, assemble, disassemble, and operate machinery
• Exercise troubleshooting and critical thinking skills
• Measure, examine, and test completed product for defects

Job Requirements

• Previous CNC Machinist experience required
• Attention to detail
• Basic math skills
• Able to read ruler, tape measure, calipers, and micrometers
• Able to read blueprints/schematics

Working For ResourceMFG

ResourceMFG is a nationwide professional staffing organization with over 50 years of recruiting and selection expertise to match job candidates with positions where they will succeed. As the specialty franchise division of Employbridge, the nation’s largest industrial staffing company with over 400 locations, finding your ideal job opportunity has never been easier. Through our extensive network of clients, we can introduce you to a variety of administrative, clerical, or light industrial opportunities. We’re dedicated to getting good people good jobs.

CNC Machinist II Needed in Fort Collins

Weekend shift, Friday-Sunday 5am-530pm

$20-24/Hour,  Depending on Experience

As a Machinist II you are responsible for the operation of computer controlled machines to perform one or more machine functions on a variety of materials

Machinist II job Duties:

• Set Up CNC equipment with supervision as needed

• Change cutting tools and adjust machine feeds and speeds as needed

• Perform FP (First Part) and In-Process part inspections

• Utilize measuring equipment used in the industry such as calipers, micrometers, height gauges, gauge pins, and other measuring equipment needed to complete work

• Utilize production work orders (Travelers) and associated documents to complete work

• Ensure all required documentation is complete and correct

• Use prescribed procedures to inspect part(s) and product(s) produced to assure compliance to specifications that will eliminate defects, scrap, rework, etc. Ensure part(s) meet all customer quality requirements per the company’s AS9100 Quality System.

• Detect and report defective equipment , materials, and/or faulty operations to Shift Supervisor

Machinist II Job Requirements:

• High School Diploma or equivalent and a minimum of 2 years’ experience with CNC machining, aerospace blueprints/drawings and specifications OR equivalent education/experience required

• Skilled Trade certification from accredited college, community college, or vocational school preferred.

• Basic knowledge of CNC equipment capability and daily maintenance

• Ability to define problems, collect data, establish facts, and draw valid conclusions

• Skill in performing mid-level math skills efficiently and accurately (including addition, subtraction, multiplication, and division using whole numbers, fraction and decimals

• Basic knowledge of manufacturing processes related to the aerospace industry.

• Skill in using measuring tools such as calipers, micrometers and other inspection gauges

• Skill in reading and interpreting documents such as work orders, drawings, internal and customer specifications, manuals, and safety regulations.

This position includes the opportunity to enroll in Medical, Dental, Vision, Term Life, and Short-Term Disability benefits, as well as a Retirement Plan.  All Colorado Associates are also entitled to accrue, and use paid sick and safe leave.

#rmfgindeed

#rmfgzip

CNC Machinist

Shift: 2nd or 3rd Shift

Payrate: $20 to $25 per hour based on shift and verified job experience

Required skills and qualifications

• Critical-thinking and decision-making skills
• Expertise in math and computer applications
• Manual dexterity
• Strong mechanical and technical skills
• Knowledge of technical machinery

Now Hiring a CNC Operator in Tipp City

Shift: 7am-3:30pm

Pay: $18

Job Description:

Operate CNC Machines, Vertical and Horizontal Mills and Lathes in a timely manner while observing all safety procedures. Make all necessary offset adjustments to maintain part specifications within the customers request.

-Operate manual and automated machines. Moving and packing parts. Proper handling of parts per the router. Perform regular quality checks. Complete all related paperwork accurately and timely. Maintain a clean work area. Other duties as assigned.

-Must be able to stand for long periods of time, capable of performing visual inspections, hearing instructions and communicating effectively. Able to read and use Mic’s, read and understand blueprints. Capable with authorization of making all necessary offset adjustments to maintain parts per customer requirement. 

Apply Today

We are seeking a skilled and detail-oriented Machinist with extensive experience working with lathe machines to join our team. The ideal candidate will be responsible for creating precision components, repairing machinery, and maintaining a clean and safe work environment. This role involves both standard machining tasks and special projects, requiring a strong understanding of mechanical drawings and precise measurements.

Key Responsibilities:

• Operate and maintain lathe machines for the production of high-precision components.
• Manufacture plate cylinders, ensuring precise fits and adherence to detailed specifications.
• Use gear shapers to create and fine-tune gears, ensuring accuracy in dimensions.
• Diagnose and repair machine breakdowns to minimize downtime.
• Perform build-up, grinding, and re-welding of various shafts as needed.
• Weld steel, cast iron, aluminum, and stainless steel components, as well as braze brass materials.
• Fabricate sheet metal parts, including guards, ink pans, and other custom components.
• Assist with dismantling and rebuilding machinery and other equipment.
• Grind rubber rolls to exacting standards.
• Manufacture custom parts in accordance with mechanical drawings, ensuring dimensional accuracy.
• Cut shafts to specified dimensions.
• Read and interpret mechanical drawings for precise project execution.
• Collaborate with and assist other Machinists on various tasks.
• Maintain a clean and organized workspace and ensure proper care of equipment.
• Achieve and exceed production goals as set by management.
• Adhere to safety protocols and follow established task procedures.
• Perform quality control checks using precision measuring equipment.
• Adapt to shift work and demonstrate flexibility in work hours.
• Take on miscellaneous duties as directed by management and participate in special projects as needed.

Qualifications:

• Experience: Proven experience working with lathe machines and other machining equipment.
• Skills: Proficiency in welding, grinding, gear shaping, and sheet metal work.
• Attention to Detail: Ability to produce precise components, ensuring specifications are met.
• Reliability: Consistent attendance, strong work ethic, and a commitment to achieving production targets.
• Technical Ability: Skilled in reading mechanical drawings and using measuring tools for quality checks.
• Flexibility: Willingness to work various shifts and adapt to changing job requirements.
• Safety-Minded: Commitment to maintaining a safe work environment.

What We Offer:

• Competitive salary.
• Opportunities for professional growth and skill development.
• A collaborative and supportive team environment.
• Challenging projects that allow for the development of technical skills.

JOB PURPOSE:

• Sets up and operates conventional, special purpose, and computer numerical control (CNC) machines and machining centers to fabricate metallic and nonmetallic parts.

RESPONSIBILITIES AND ESSENTIAL REQUIREMENTS:

• The CNC Operator will be responsible for performing complex set ups, operate and monitor assigned machines and must have the ability to run both CNC Lathes and Mills. o Must be able to run multiple CNC machines throughout the shop o Ability to work in a fast-paced, high-speed environment, follow standardized work and adhere to safe work practices in a continuous improvement environment o Prepare and load raw materials and parts onto the machines o Starts and observes machine operation to detect malfunctions such as speed, feed, coolant flow and depth and angle of cut o Enters commands to retrieve, input or edit computerized machine control media o Consistently contributes to the overall output efficiency. o Effectively manages time, proactively plans by laying out work to be completed. o Make complex set ups o Perform programming edits

Responsible:

Inspecting parts to specifications and making adjustments, or tool changes as necessary to maintain quality specifications. o Good knowledge of Geometric Dimensioning and Tolerancing o Complete 1st article inspection o Get in process inspection throughout the shift as required o Ensure blueprints are followed to specification. Load and qualify tooling for jobs o Bore/Mill jaws o Make adjustments such as tool stations, inserts, etc. o Very good knowledge of tooling insert geometry. o Communicates well with fellow employees, engineers, departments, and between shifts.

ResourceMFG-Employbridge is hiring Experienced CNC machinists in OKC!

SHIFTS: Weekend Fri-Sun 5:30a-5:30 pm

PAY: $20-27/hour depending on experience

JOB DUTIES & Qualifications:

• Minimum of 2 years machining experience.
• Experience with FANUC or HAAS controls and programming languages.
• Able to setup machines.
• Mill or lathe experience but experience with both is preferred.

 As a ResourceMFG-Employbridge CNC Machinist we offer: 

• Direct Deposit
• Weekly pay
• FREE Online courses