Working for Employbridge

If you’re looking for a job in manufacturing, Employbridge specializes in you! We are America’s largest staffing company with over 30 years in business, putting more than 24,000 people to work nationwide, each week. A company that treats you like family, we’re committed to providing equal opportunities to all, a healthy and safe work environment, fair pay and the tools to succeed and grow.

Owensville Manufacturing Facility Seeking Light Assembly Associates and Machine Operators on 1st Shift. IMMEDIATE START!

Shifts/Hours/Pay:

• 1st shift 7:00am-3:30pm
• Assembly $15.75/hr
• Machine operators $17/hr
• Mandatory overtime and Saturdays as needed

Job Summary:

• Assembles fabricated parts at floor stations.
• Tests and calibrates parts and mechanisms to meet tolerances and product specifications.
• Uses hand tools and power tools to assemble units to product specifications.
• Identifies units that fail tests or tolerance levels and repairs as necessary

Duties:

• Entry level Light Assemblers responsibilities include assembling, wiring, and adjusting precision units.
• May be required to assemble non-standard units.

#nowhiring

Benefits:

Hiring Immediately

Weekly Pay

Pay card or Direct Deposit

No screening Fees

Affordable health insurance FREE online education classes available

Unlimited referral bonuses

Open Interviews, Monday-Friday 9 am-3 pm

#nowhiring

Unpack, mark, and visually check incoming parts and products as directed.

ESSENTIAL DUTIES and RESPONSIBILITIES
•Unload and position parts for processing by the Quality Department utilizing lifts and hoists as needed.
•Examine each part for visible defects and report observations to higher level Inspectors.
•Operate and/or adjust equipment to mark parts accurately.
•Apply consistently accurate and clear markings on a variety of products.
•Check each mark for clarity and depth.
•Work from written and verbal instructions, procedures and documents.
•Perform all tasks as required of a Safety Sensitive position.

OTHER DUTIES and RESPONSIBILITIES
•Verify all marking equipment is in good condition and all safety features are operational prior to operation.
•Visually inspect all markings for accuracy, completeness, and visibility according to established departmental procedures.
•Safely, effectively, and efficiently perform marking duties with near 100% accuracy.
•Effectively and efficiently use time to safely perform duties.
•Complete all paperwork in required manner and time.
•Demonstrate a willingness to learn to produce new products, use new procedures, and embrace and support change.
•Follow and support established HSE programs.
•Report any unsafe situations to appropriate Management Team member if necessary.
•All other duties or tasks as assigned.

KNOWLEDGE, SKILLS, ABILITIES
•Ability to complete assigned tasks with near 100% accuracy on an ongoing basis.
•Ability to read, interpret, and follow work instructions.
•Ability to establish and maintain constructive working relationships with people.
•Ability to complete multiple tasks and projects daily in a fast-paced manufacturing environment.
•Ability to speak, write and read English.
•Able to work independently or as part of a team on a broad variety of projects.
•Strong problem-solving and analysis skills.
•Willingness to work additional hours to meet tight deadlines.

QUALIFICATION REQUIREMENTS
•High School Diploma, GED or equivalent.
•One (1) year previous experience with repetitive detail-oriented responsibilities. Preferably in a manufacturing environment.
•Must be able to pass a vision acuity test (corrective lenses allowed).
•Must obtain and maintain active OSI-OKC Piper certifications to operate cranes.

Working for Employbridge

If you’re looking for a job in manufacturing, Employbridge specializes in you! We are America’s largest staffing company with over 30 years in business, putting more than 24,000 people to work nationwide, each week. A company that treats you like family, we’re committed to providing equal opportunities to all, a healthy and safe work environment, fair pay and the tools to succeed and grow.

Day and Night Shift Warehouse Packing Positions

Work only 15 days in a month and get paid 40 hours each week

Day Shift: 7AM to 7PM  or 7PM to 7AM

• $15/hour-dayshift – $16/hour-night shift
• 40 hours per week schedule
• 2-2-3 Schedule 

Packer Job Description Includes:

• Only Work 15 Days a Month 
• Every other weekend is a 3-day weekend
• Work no more than 3 consecutive days
• Light industrial manufacturing. Packing Styrofoam products

Benefits:

• Weekly pay.
• Over time available

Don’t miss this great opportunity apply today!

• Experience preferred. Willing to learn new skills.
• Great attitude and attendance. 

Apply Now!

Essential Duties & Responsibilities

• Receive customer, client, and Independent Contractor phone calls and respond accordingly.
• Check e-mail regularly and respond appropriately.
• Correspond with the Central Office for customer relations, researching orders, and other location issues.
• Receive all previous day’s routes from local Operations Manager and scan to Home Delivery Administration.
• Responsible for full cycle oversight of BOL process, including follow up from previous day's BOLs, update delivery date for reschedules, prepare next day's deliveries, and file completed BOLs.
• Print out all Service Orders file appropriately.
• Scan service orders to appropriate departments.
• Enter notes and additional information for customer and Independent Contractors into appropriate system.
• Correspond with Warehouse Manager on customers’ orders.

Machine Operator

We are hiring a Machine Operator in Mentor Ohio to work in a manufacturing environment. This is a great opportunity for someone who is mechanically inclined, enjoys working with their hands, and is looking to grow with a company.

Responsibilities:

• Operate production machines.
• Load materials into machines.
• Monitor equipment during operation.
• Perform basic machine adjustments.
• Check parts for quality.

Requirements:

• Mechanical aptitude and willingness to learn.
• Ability to use basic hand tools.
• Reliable attendance and positive attitude.
• Relatable skills such as the ability to work on cars is a plus
• Relatable skills such as the ability to fix things in a home setting is a plus

#nowhiring

Employment is contingent upon successful completion of a drug and background screening

#nowhiring

Location: Mentor, Ohio

Company: ORBIS Corporation

Hiring Through: ResourceMFG

Shifts available: 2nd and 3rd

Pay rate: $17.00 per hr

Job duties:

• Assemble plastic containers, pallets, and other packaging products.
• Attach components and perform basic finishing operations.
• Trim excess plastic from molded products.
• Use basic hand tools and production equipment.

Apply now!

#nowhiring

Work well with others and must be reliable!

#nowhiring

JOB Fair – Cookeville office – 440 S. Lowe Ave.  November 4th 9am-3pm 

NO EXPERIENCE in Factory, Manufacturing or Production? NO PROBLEM! We will train.

Requirements for Manufacturing Production Associates:

• Work 40+ hours a week
• Be a team player
• Good Attendance
• Ability to work in a fast-paced environment,
• Entry Level Production and Manufacturing Associates.

Pay and Shifts for Factory Production workers:

$13.50-$14.50 per hour.

Days -7am-3pm,

Evenings – 3p,-11pm and

Nights- 11pm-7am.

Mandatory OT and some weekends.

#nowhiring

APPLY TODAY! Hablamos Espanol.

Production Manufacturing

• Build and hand test product under supervision, while conforming to customer build instructions.
• Perform a variety of assembly operations involving the application of connectors and hardware on wire harnesses and/or cable assemblies (push, prep, pin) and assemble backend hardware.
• Apply heat shrink, sleeving, labels and spot tie as required.
• Operate presses and terminating equipment.
• Cutting of sleeves and convoluted tubing per customer specifications.
• Identify and apply product labels per instructions.
• Utilize hand tools (wire strippers, pliers, cutters, heat guns) and operate automated wire strip/termination equipment.
• Identify parts by using part numbers.
• Follow work procedures to meet production schedules.
• Follow instructions of production methods, equipment use, and maintain quality of product
• .Perform other duties as required.
• Adhere to company Policies, Quality, Efficiency and Safety Standards.
• Complete all corporate training requirements.
• Must maintain an acceptable attendance record in accordance with company policy.

• Need to have previous cable or wire assembly experience.
• Ability to read and understand blueprints and other manufacturing work instructions.
• Ability to effectively read, comprehend and communicate in the English language preferred.
• Good eyesight and ability to distinguish colors.
• Ability to use small hand tools and semi-automated equipment.
• Highly skilled in working with team members in a productive manner.
• Motivated and detail oriented

Metal Tube Bending. Production Associate

Personal Qualities: 

• Attention to Detail
• Great Attitude -Trustworthy
• Dependable
• Excellent Mechanical

Aptitude Responsibilities:

• Fabricate tubing assemblies to identified customer drawings and specifications, in an accurate and timely manner
• Keep up with new technology, processes and equipment in order to play an active role in maintaining company ability to move forward
• Housekeeping
• Ensuring that Health & Safety standards are maintained. 

Qualification Requirements: 

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. 

• Must have a basic working knowledge in various pieces of tube fabrication equipment and be able to read blueprints.
• Familiarity with CNC equipment, welding and basic metal fabrication is desired. Good mechanical skills required

No Experience Required!

We are seeking dependable and safety-focused General Laborers to support daily manufacturing and production operations. Team members will assist with material handling, production support, housekeeping, and other duties to ensure efficient plant operations. This is an excellent opportunity for individuals seeking stable employment in a fast-paced manufacturing environment.

Essential Responsibilities

• Load, unload, and move raw materials and finished products throughout the facility.
• Assist machine operators and production team members as needed.
• Perform quality inspections and report defects or safety concerns.
• Maintain a clean and organized work area.
• Follow all safety policies, procedures, and PPE requirements.
• Operate basic tools and equipment safely.
• Support shipping, receiving, and inventory activities when required.
• Complete other general labor duties as assigned by supervisors.

Qualifications

• High school diploma or GED preferred.
• Previous manufacturing, warehouse, or production experience preferred but not required.
• Ability to lift up to 50 pounds regularly.
• Ability to stand, walk, bend, and perform repetitive tasks throughout the shift.
• Strong attendance record and reliability.
• Ability to work independently and as part of a team.
• Commitment to workplace safety and quality.

No Experience Required

Painter

painter

1st Shift Shipper Schedule:

Monday-Friday, 5:30am-2pmJob Summary:

The 1st Shift Shipper is responsible for processing bulk shipments, scanning serialized products into the ERP system, and ensuring accurate shipment preparation.

This role requires attention to detail, basic computer skills, and the ability to lift and move materials repeatedly throughout the shift.

Key Responsibilities:

Process and prepare bulk shipments for customer orders.

Scan serial numbers and enter shipment data into the ERP system.

Verify shipment accuracy and maintain inventory traceability.

Load, unload, and move materials as needed.

Follow shipping procedures and quality standards.

Maintain a clean and organized work area.

Support team goals and assist in other warehouse functions as needed.

Requirements:

Previous shipping or warehouse experience preferred.

Basic computer and data entry skills.

Ability to lift and move materials repeatedly throughout the shift.

Strong attention to detail and accuracy.

Team-oriented with a positive work ethic.

Reliable attendance and punctuality.

Responsibilities include

-Set up and operate lathe, mill, grinder machines

-Inspect finished products to ensure they meet quality standards and specifications

-Follow all safety protocols

-Work closely with other team members to meet production goals -Communicate effectively regarding any issues encountered

-Associate should understand basic math, including fractions and tape measure measurements or willingness to learn

Forklift

-Responsible for moving materials and goods efficiently and safely

-Load/unload products and materials

-Assist in inventory checks and maintain accurate records

-Assist in shipping/receiving area, ensuring products are packaged correctly

-Ensure that all items are stored in compliance with safety regulations

URGENTLY HIRING!  Multiple Immediate Openings for Assembly Manufacturing Production Associates for major automotive supplier.

Days and Night shifts available.
Nights -3rd shift   9pm- 5:30 am

Requirements for Manufacturing Production Assembly Associates: 

• Join a leading automotive supplier in a fast paced manufacturing environment.  Seeking dependable production Assembly associates committed to quality, safety, and attendance. 
• Assemble automotive bumpers to production standards.
• Follow work instructions and safety procedures.
• Work as a team to meet production goals.
• Lift 40 lbs up to 250 times a shift.
• Able to read and distinguish numbers.
• Work overtime as scheduled.

Looking for motivated Production Assembly Candidates that are prepared for production paced assembly work, quality inspections, safety procedures, and dependable attendance.

Benefits for Manufacturing Production Assembly Associates: 

• Weekly Pay
• FREE Online courses
• Referral Bonuses
• Opportunity for full time permanent placement
• Grow opportunities

ResourceMFG is proud to offer manufacturing career opportunities in Scottsboro! Conveniently located in close proximity to Guntersville, Stevenson, Bridgeport, Sand Mountain area and Fort Payne. 

*CURRENT SCOTTSBORO OPENINGS: FORKLIFT OPERATOR- 1ST SHIFT & 3RD SHIFT MACHINE OPERATOR 

• 1st Shift 6am – 2:30 pm ( OT until 4:30pm) and 3rd shift 9:30pm -6:00am
• $19.99 + $1 shift premium for 3rd 
• As Production Associates task can include assembly, wiring, brazers, machine operators, & forklift operators.
• These are full-time/temp-to-hire positions. We will be glad to support you while  you transition to a permanent employee with the HTPG facility.

Stand for 8-10 hours

Able to lift 50 lbs consistently

Attention to Detail 

 TEXT your name to  423-837-9919 once the application is completed. We will schedule you appointment at a location near you. 

3rd Shift Material Handler (Forklift/Pick Pack/Order)

Location: Frankfort, KY

Shift: 3rd Shift (Overnight)

Pay: Competitive Pay Based on Experience

Job Overview

Nashville Wire is seeking a dependable and safety-focused Material Handler to join our 3rd Shift team. This position is responsible for operating forklifts, picking and packing orders, moving materials throughout the facility, and supporting production and shipping operations. The ideal candidate will have strong organizational skills, attention to detail, and the ability to work in a fast-paced manufacturing environment.

Responsibilities

• Operate forklifts and other material handling equipment safely and efficiently
• Pick, pack, and prepare customer orders for shipment
• Load and unload trucks while maintaining product accuracy and quality
• Transport raw materials and finished goods throughout the facility
• Verify quantities, labels, and product information to ensure order accuracy
• Maintain inventory organization and storage locations
• Assist with cycle counts and inventory control activities
• Follow all safety procedures and company policies
• Keep warehouse and production areas clean and organized
• Support production and shipping departments as needed

Location: Frankfort, KY

Shift: 3rd Shift (Overnight)

Pay: Competitive Pay Based on Experience

Job Overview

Nashville Wire is seeking a dependable and hardworking 3rd Shift Custodian to join our team in Frankfort, KY. This position is responsible for maintaining a clean, safe, and organized manufacturing facility to support production operations and ensure a positive work environment for all employees.

Responsibilities

• Clean and maintain production areas, offices, restrooms, breakrooms, and common areas
• Sweep, mop, vacuum, and remove trash throughout the facility
• Clean and sanitize restrooms and replenish supplies as needed
• Maintain floors, windows, and other facility surfaces
• Follow all safety procedures and company policies
• Safely use cleaning chemicals and custodial equipment
• Report maintenance or safety concerns to management
• Assist with special cleaning projects as assigned
• Ensure the facility remains inspection-ready and free of hazards

1st Shift General Labor – Powder Line

Location: Frankfort, KY

Shift: 1st Shift

Pay: Competitive Pay Based on Experience

Job Overview

Nashville Wire is seeking motivated and reliable individuals to join our team as General Laborers on the Powder Line. This position plays a key role in the powder coating process by assisting with the preparation, coating, inspection, and handling of metal wire products. The ideal candidate is safety-focused, detail-oriented, and ready to work in a fast-paced manufacturing environment.

Responsibilities

• Load and unload parts onto the powder coating line
• Prepare materials and products for the coating process
• Inspect finished products for quality and proper coating coverage
• Package and organize finished materials for shipment
• Follow production schedules and work instructions
• Maintain a clean and organized work area
• Assist with material handling and movement of products throughout the facility
• Adhere to all safety procedures and company policies
• Support team members and production goals as needed

Inventory Control Associate – 1st Shift Position Summary The Inventory Control Associate supports warehouse inventory accuracy through cycle counting, inventory investigations, and inventory consolidation activities. This position works closely with warehouse operations to identify and resolve inventory discrepancies while maintaining accurate records in the ERP system. Key Responsibilities Perform cycle counts and inventory audits. Investigate and resolve inventory variances. Complete inventory consolidations and stock movements. Maintain accurate inventory transactions in the ERP system. Operate Raymond lifts to support inventory activities. Assist with physical inventories and inventory-related projects. Follow all safety and quality requirements. Qualifications Previous warehouse inventory control experience required. Experience with cycle counting and inventory reconciliation. Basic computer and ERP system skills. Raymond lift experience required. Strong attention to detail and organizational skills. Ability to lift up to 50 lbs. and work in a warehouse environment.

CNC Lathe Machine Operator – Earn $25/Hour | All Shifts Available | Victorville, CA

Are you an experienced CNC Lathe Operator looking for a great opportunity with competitive pay and long-term potential? We are seeking skilled CNC Lathe Machine Operators to join our manufacturing team in Victorville, CA. Positions are available on all shifts with a pay rate of $25.00 per hour.

Key Responsibilities

• Set up, operate, and monitor CNC lathe machines to produce precision-machined components.
• Read and interpret blueprints, technical drawings, and work instructions.
• Perform tool changes, machine adjustments, and basic troubleshooting.
• Use precision measuring instruments including calipers, micrometers, and gauges to verify product quality.
• Maintain strict quality standards and machining tolerances.
• Follow workplace safety procedures and production schedules.
• Complete required production and quality documentation.

Qualifications

• Previous CNC Lathe operating and setup experience required.
• Strong ability to read blueprints and technical drawings.
• Experience using precision measuring tools.
• Knowledge of machining processes, production standards, and quality control procedures.
• Ability to troubleshoot equipment issues and work independently.
• Commitment to safety, accuracy, and meeting production goals in a fast-paced manufacturing environment.

This is a Contract to Hire opportunity for a client located in Marysville, MI. 

1st shift 6:30am-5:00pm

$22-28 an hour

This role is responsible for installing, assembling, testing, and troubleshooting hydraulic systems on custom-built equipment.

Responsibilities

Read and interpret hydraulic schematics and mechanical blueprints

Measure, bend, flare, and install rigid hydraulic tubing

Assemble and install hydraulic pumps, cylinders, valves, manifolds, hoses, and power units

Perform hydraulic system testing, startup, and troubleshooting

Diagnose leaks, pressure issues, and component failures

Ensure all assemblies meet quality and safety standards

Qualifications

Experience with hydraulic pipe fitting, hydraulic assembly, or industrial hydraulic systems

Ability to read hydraulic schematics and blueprints

Knowledge of pumps, cylinders, valves, manifolds, hoses, and fittings

Experience with hydraulic tubing fabrication and installation

Strong mechanical aptitude and troubleshooting skills

Ability to work independently and as part of a team

Now Hiring: Packaging Associates in Robinson, IL

Schedule:

• 1st Shift: 6:00 AM – 6:00 PM ; $15.66/hour
• 3rd Shift: 6:00 PM – 6:00 AM ; $16.16/hour
• 12-Hour Shifts

Job Responsibilities

• Prepare and pack products for shipment in a safe, accurate, and efficient manner.
• Inspect packaging and products for defects, damage, or quality issues.
• Ensure all items are packaged according to company standards.
• Monitor and operate packaging equipment and machinery as required.
• Assist with general production and warehouse duties.
• Report equipment malfunctions, safety concerns, or packaging issues to the supervisor immediately.
• Maintain a clean, organized, and safe work environment.
• Follow all company safety and quality procedures.

Requirements

• Ability to stand, walk, bend, and lift throughout a 12-hour shift.
• Strong attention to detail and quality.
• Ability to work in a fast-paced production environment.
• Reliable attendance and punctuality.
• Manufacturing or packaging experience is a plus but not required.

Benefits

• Weekly pay
• Full-time hours
• Opportunity for overtime
• Long-term employment opportunities
• Supportive team environment

Apply today and start your career with a growing team in Robinson, IL!

Position Summary: 

We are looking for an experienced Structural Fitter with welding experience. This role involves reading blueprints, fitting and assembling structural steel components, and preparing assemblies for welding while meeting quality and safety standards.

Key Responsibilities:

-Read and interpret blueprints, engineering drawings, and work orders.

-Measure, mark, and lay out structural steel components.Fit, align, and assemble structural steel members, plates, and frames to required specifications.

-Operate hand tools, power tools, grinders, and fabrication equipment.

-Verify dimensions and ensure quality standards are met.

-Work closely with welders to ensure proper fit-up prior to welding.

Requirements:

-Structural fitting experience required.

-Welding experience preferred.

-Strong fabrication skills and attention to detail.

-Commitment to safety and quality workmanship.

The Forklift Operator is responsible for safely operating a forklift (hi-lo) to move, load, unload, store, and transport materials throughout the facility. This role supports production, shipping, receiving, and inventory operations while adhering to all safety standards.

• Set up and operate Axis laser cutting machines and related equipment.
• Load and unload raw materials, sheet metal, and finished parts.
• Read and interpret blueprints, technical drawings, work orders, and job travelers.
• Verify material type, thickness, and specifications before processing.
• Monitor machine performance and make necessary adjustments to optimize quality and productivity.
• Inspect finished products using measuring instruments and visual quality checks.
• Perform routine machine maintenance and cleaning activities.
• Troubleshoot equipment issues and notify maintenance personnel when necessary.
• Maintain accurate production records and documentation.
• Follow established safety procedures, quality standards, and company policies.
• Collaborate with team members to meet production goals and deadlines.
• Assist with changeovers and setup reductions to improve operational efficiency.

• Min of 5 years’ experience with NTC 5-Axis Laser Equipment
• Min of 5 years’ experience on Trumpf 3-Axis Laser Equipment
• Experience needs to be recent as well as candidates’ main responsibility
• Ability to program at the machine
• Ability to maintain CNC programs
• Ability to lift 30lbs without assistance
• Ability to follow written and verbal directions

• Must be available to work overtime and weekends when needed
• 1st Shift Mon thru Fri: 6:00am to 4:30pm (10-hour shift) or 6:00am to 2:30pm (8-hour shift), Sat 6:00am to 12:00pm (when needed)

• 2nd Shift Mon thru Fri: 4:30 pm to 3:00 am (10-hour shift) or 4:30 pm to 1:00 am (8-hour shift), Sat 2:00 pm to 8:00pm (as needed)

Excellent Manufacturing Career Opportunities in West Tulsa!!!

Electrical Panel Assemblers Needed

Shift: 8:00am-5:00pm Monday-Friday

Pay $19-$25 an hour

Job Description:

• Electrical Panel Assembler Assemble and wire electrical control panels to electrical schematics.
• Panels include Variable Frequency Drive, Soft Start and custom control panels using Programmable Logic Controllers or relay logic.
• Inspect industrial control panels against electrical and dimensional drawings prior to shipment.
• Panels include Variable Frequency Drive, Soft Start and custom control panels built to UL 508A requirements.
• We train, and there is a defined advancement path into function testing and senior technician roles.

Apply today and let us help you start your next AMAZING career move!

Employbridge Connecting Great People with Great Companies.

Good attendance is a must