Forklift Operator

Raleigh – Durham – Graham – Haw River

·      Day Shift: 12 hours 7am – 7pm (2-2-3 Schedule) — $20.00 – 22.00/hr

·      Night Shift: 12 hours 7pm – 7am (2-2-3 Schedule) — $21.50 – 23.65/hr

3-Day weekend every other week!

Benefits

·           Medical, Dental, and Vision Insurance Benefits

·           Weekly Pay

·           Free Online Education

·           A Dedicated Recruiter

Looking for:

·           Team orientated associates that can work in a faced paced environment

·           Safety focused

·           Experience operating sit-down, stand-up, reach trucks and cherry pickers

·           Able to lift 50 lbs. as needed

·           Attention to detail and quality

·           Basic computer and inventory system experience preferred

Job Responsibilities

·           Operate forklifts and other material handling equipment safely

·           Move raw materials, finished goods and inventory throughout facility

·           Load/unload trucks, trailers and containers

·           Stage materials for production and shipping departments

·           Maintain clean and organized work area

·           Follow all company safety procedures and guidelines

This is an excellent opportunity for a stable job in production and manufacturing to build a long-term career with a company that values hard work, reliability, and teamwork.

Apply Now!

#nowhiring

Forklift experience

• Access Control & Credential Verification: Opening gates and doors exclusively for authorized personnel, checking identification badges, matching visitors against approved rosters, and validating commercial driver's licenses.
• Logistics & Traffic Logging: Maintaining thorough paper or digital logs of all inbound and outbound vehicle traffic. This includes tracking semi-truck arrivals, carrier names, trailer numbers, and arrival/departure timestamps.
• Vehicle & Cargo Inspections: Examining outgoing delivery trucks and passenger vehicles to verify that cargo loads are secure and preventing the unauthorized removal of company property.
• Surveillance & Perimeter Security: Monitoring Closed-Circuit Television (CCTV) feeds, checking perimeter alarm systems, and watching for suspicious behavior around the facility boundaries.
• Customer Service & Facility Navigation: Greeting visitors, answering incoming phone calls, and directing delivery drivers or contractors to specific docks, parking zones, or buildings on the premises.
• Reporting & Emergency Communication: Documenting daily activities in a shift log and writing formal incident reports if a safety protocol is breached, property damage occurs, or an emergency arises

Select Staffing has a great opportunity for a Quality Inspector within a electronics manufacture in Chatsworth, CA.

Pay: $23.00 – $30.00 DOE

Hours: 7AM – 3:30PM

Schedule: Monday to Friday

Primary Duties and Responsibilities:

• Perform FIRST ARTICLE inspection for all level boards and record results.
• Perform INCOMING inspections for all level boards and components and record results
• Perform FINAL inspections of completed assemblies in accordance with procedures and
• requirements and record results
• Ensure accuracy of test equipment by checking against standards
• Review and sign company certifications as required
• Check returned/rejected material for status
• Perform random check of in-process jobs as necessary
• Maintain process and swiftness of department yields and accuracy
• Maintain quality records relating to all inspection activities
• Follow instructions with great care and precision

Education and/or experience:

• Knowledge of product, ISO process, IPC A610 Latest Revision, J-STD-01 Latest revision
• Experience with sampling techniques
• Experience with measuring equipment
• Ability to read and interpret assembly drawings and instructions
• General computer knowledge (locating & opening and updating files)
• MS Excel (enter info and format cells)
• Basic math skills
• Ability to Speak, Write, Read and understand English
• Good communications skills

Physical Requirements:

• Good Eyesight visual acuity test required periodically
• Ability to lift up to 50 lbs.

#Nowhiring

1+ years of experience

Pick/Pack Associates needed for warehouse located in Clayton, OH

 $17.00 per hour (with attendance bonus for certain departments)

Temp to Hire-No Experience Needed 

1st shift 7-3 with paid lunch

Packaging Associate Job Duties in the Warehouse:

• Packing
• Labeling
• Taping
• Inspecting
• Ability to stand on your feet for 8 hours daily
• LOTS of walking
• Mandatory OT when needed (7-4 and 7-3 on Saturdays)

ResourceMFG Offers:

• Weekly Pay
• Paid training
• Medical, Dental, Vision and 401K
• Free online career courses through Penn Foster
• Discounts through Verizon and AT&T

#nowhiring 

1st Shift 

Apply Now

#nowhiring

Hiring for days and night shifts

12 Hour shift 7am-7pm or 7pm -7am

2-2-3 work schedule

Weekly pay and Monthly bonus

Days pay $15 and Nights $16

Let us help YOU build your Career!  ResourceMFG is currently seeking assemblers at Boston Scientific in Spencer, IN.Se habla español!!Shifts Available1st Shift – 6am-7am start times, Mon-Fri, $17.50hr2nd Shift – 2pm-3pm start times, Mon-Fri, $18.40hrOT on SaturdaysProduct Builder ResponsibilitiesAssemble small medical devices using small plastic pieces and small wires.Raises atypical observations and notifies management/quality as required.Identifies and raise opportunities for procedural improvements. Supports continuous improvement initiatives.Operate in a clean room environment within required gowning, aseptic behaviors, and proper flow procedures; performs general cleanroom housekeeping, including room and equipment cleaning(s), disposal of trash and recyclables, and adherence to 5S standards.Addresses corrections to all executed documentation in a timely manner to support lot release.Perform basic math skillsOther duties as assignedJob RequirementsHigh school diploma, HSE or GED is required3 months or greater of manufacturing experience Must be able to read and write in English/SpanishOutstanding Benefits Available:Career Growth Potential Weekly Pay with Direct Deposit optionsMedical, Dental, Vision, AD&D available401KAwesome on-site Cafeteria On-site Gym Credit Union on-siteFree YMCA membership#nowhiring

We’re Hiring 2nd shift Mechanical Assemblers!

Do you have cleanroom and assembly experience? Do you have microscope experience? If so, APPLY today!

We need you!

• 2nd shift 2:30pm-11:00pm
• $20-$23/hour
• Temp to Hire opportunities

Responsibilities:

• Assemble of medical devices using a microscope and use production/inspection tools and equipment needed for product builds
• Operate tools & equipment, and complete documentation as required
• Perform equipment set-up, operation, and in-process inspection in order to accomplish assigned task(s).
• Labeling and packaging of medical products. 

Education:

• High school or equivalent with two or more years of relevant experience.
• Minimum of 1 years of experience in low or high-volume production

Required Experience:

• Prior microscope and medical device assembly experience required
• Understand and perform in-process inspection to assure workmanship and quality of in-process medical devices.

We Offer You:

• Weekly Pay (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

• High school or equivalent with two or more years of relevant experience.
• Minimum of 2 years of experience in low or high-volume production
• Required Experience: Hands-on experience in medical device manufacturing.

Select Staffing is hiring a Mechanical Assembler for a leading electronics manufacturer in Van Nuys, CA!

Pay: $19.00 – $21.00/hr

Schedule: Monday – Friday, 7:00 AM – 3:30 PM

Join a growing manufacturing team responsible for building and supporting equipment that powers global communications. This role offers hands-on work in mechanical and electronic assembly within a fast-paced production environment.

Key Responsibilities: 

• Assemble electronic rack chassis, panels, box builds, and cable harnesses from drawings and work instructions
• Perform wire routing, soldering, and fiber optic cable harness assembly
• Inspect products and identify quality concerns to ensure specifications are met
• Support kitting of materials and components for production
• Maintain a clean and ESD-safe workstation
• Assist with product modifications, packing, and inventory of consumable parts
• Work closely with production teams to complete weekly work plans

Qualifications: 

• Experience in an electronic manufacturing environment
• Strong mechanical assembly skills
• Ability to read assembly drawings, blueprints, and work instructions
• Knowledge of wire routing and cable harness assembly
• Basic computer skills and ability to work from Excel-based work plans
• Team-oriented with strong attention to detail

If you’re looking to grow your manufacturing career with a stable company, apply today!

#NowHiring

1+ year of electromechanical assembly

Instrument Fitter and Tubing

Duties:

• Run pneumatic tubing
• Complete the layout of tubing on skids
• Run tubing to the end devices
• Bend tubing 1/4 – 1/2 inch thick
• Read General adjustment and P&ID Drawings
• Fabricate bracket braces and instrument racks as needed
• Reading blueprints
• Familiar with different types of tubing
• Knowledge of end devices*Understanding of system flow
• Performs required testing of tubing
• Bending stainless steel

Minimum 4 yrs experience Instrument Fitter and Tubing

Pay rate: $24-$30 depends on experience

Shift 1st; 6am-4:30pm

#nowhiring

Select Staffing has a great opportunity for a Electronics RF Technician within a electronics manufacture in Chatsworth, CA.

Pay: $21.00 – $30.00 DOE

Hours: 7AM – 3:30PM

Monday to Friday

Role Description

This is a full-time, on-site role for an Electronics RF Technician. You will be a proactive, hands-on team player responsible for testing, tuning, and troubleshooting complex digital, analog, and RF circuitry down to the component level.

• Support the production line by performing electronic testing on units, sub-assemblies, and customer returns (RMAs).
• Operate complex test equipment including Oscilloscopes, Spectrum Analyzers, Signal Generators, and Network Analyzers.
• Test, tune, and troubleshoot RF Optical Fiber units, isolating technical issues to the specific component level.
• Perform precision rework, soldering, and assembly of optical components such as fiber cables, lasers, and photodiodes.
• Conduct Environmental/ESS testing (spanning -40C to 80C) and meticulously log data for analysis.
• Provide technical assistance to Engineering for out-of-box failures and help set up or modify new product test stations.

Minimum Qualifications:

• Strong foundational knowledge of Electrical/Electronics principles and RF circuitry.
• Proven experience troubleshooting digital and analog systems to the component level.
• Ability to operate high-level test equipment (Network Analyzers, Spectrum Analyzers, etc.) and understand intermodulation/noise measurements.

#nowhiring

NDT Level II – QC Inspector

Job Summary:

Position requires performing visual inspection of welded parts and assemblies in accordance with the applicable design requirements

Duties:

• Visual inspection of welded parts and assemblies in accordance with the applicable design requirements.
• Interpretation of drawings, procedures, instructions, and specifications for determining the acceptance of the product undergoing examination.
• Perform dimensional inspection on piece parts and assemblies in accordance with applicable design documents within the manufacturing facility, at supplies, or at the customer site.
• Monitor and records results of component testing (hydrostatic testing, coating, etc.), witness, or process audits in accordance with documented procedures.
• Prepares non-conformance reports, where applicable, and completes all other documentation requirements.
• Ensure documentation of inspection and testing is performed.
• Assist in the training of other personnel as required by management or as required by the specific task being performed.

Requirements:

• Minimum 2+ year experience working within a manufacturing environment/facility.
• Will be expected to stand for 8–10-hour shifts.
• Resume required.

Pay: $26-34 depends on experience.

Shift: 1st shift Monday-Friday 6:00am to 4:30pm. 10 hour shifts. Saturdays when required.

#nowhiring

Machine Operators and Saw Operators

The machine operator is responsible for operating equipment such as bandsaws, lathes, milling machines, and grinders within the Piping & Structural Fabrication Departments.

Duties:

• Operate machinery such as saws, lathes, milling machines and grinders.
• Operate overhead cranes. 
• Maintain raw material inventories.
• Ability to read blueprints and follow product specification instructions.

Requirements:

• Minimum 2 years fabrication experience
• Able to lift up to 50 lbs
• Able to stand for 8-10 hour shifts
• Resume required

Pay: $20 -$25 depends on experience. 2nd shift differential pay.

Shift: 2nd shift – 5:30 pm – 3:30 am

Shift: 1st shift – 6:00am – 5:30pm

#nowhiring

Industrial Painter and Blaster

Our client who delivers packaged modular systems engineered and manufactured in one of our Houston facilities, which are utilized in data centers, power and commercial/industrial utility system applications.

Job Skills:

• Surface preparations & protective coatings applications on above ground piping; steel structures.
• Operate/maintain various blasting, spraying & other equipment.
• Ability to read read/interpret documents written in English.
• Application of paints & specialty coatings (epoxies, urethanes & zincs).
• Ability to utilize scaffolding, rigging, access, containment systems, & safety equipment.
• Experience with industrial coatings, application process, 2-part mixing process, HVLP equipment, consistent millage.

Minimum Requirements:

2-5 years of experience on industrial painting

Day shift and Night shifts available

1st shift – 6am – 5:30pm

2nd shift – 4:30pm – 2:30am. 2nd shift pay differential.

$22 – $25 depend on experience

Resume required

#nowhiring

Inventory Control Specialist

Job Duties:

• Perform routine cycle counting of inventory.
• Develops, executes, and oversees annual, monthly, and weekly cycle  count planning for all inventory locations/warehouses.
• Assists in the planning and execution of annual physical inventory.
• Entry of transactional data into ERP system in an accurate and  timely fashion.
• Ensuring warehouse inventory balances are maintained at the  highest-level accuracy possible.
• Performs floor to book and book to floor counting of inventory.
• Compares and analyzes inventory balance discrepancies.
• Determines root cause analysis for inventory discrepancies.
• Prepares, maintains and distributes inventory metrics dashboard to  organization,
• Provides recommendations for process changes and technology changes  to improve inventory accuracy.
• Open bales, crates, and other containers.
• Assist in counting of  inventory.
• Weighing and counting items for distribution within plant to ensure conformance to company standards.
• Recording amounts of materials or items received or distributed via appropriates computer program.

Resume required

1st shift – 6am-4:30pm  

Pay – $21 – $27 depends on experience

#nowhiring

Electrical Assembler – 2nd shift

Electrical Assembler

• Perform manual processes to complete mechanical and electrical assemblies and sub-assemblies, using hand, electric and pneumatic tooling
• Will be performing pulling and conduit wiring including piping and support fabrication
• Complete tasks as directed by manufacturing schedule with minimum supervision
• Maintain the work area and equipment in a clean and orderly condition and follow prescribed safety regulations

Requirements:

• Familiarity with assembly and measuring tools, interpretation of visual aids and ability to perform simple shop math.
• Competency in reading and interpreting engineered drawings, schematics or other technical documents.
• Have your own electrical tools. A list will be provided.
• Ability to identify and install basic electrical commodity components
• Experienced in low and medium voltage wiring and termination
• Control wiring and motor control center wiring
• Familiar with Greenlee conduit bending machine
• Resume required

Pay: $21 – $27 depend on experience

Shift: 1st shift 4:00 pm – 4:00 am. 10 to 12 hour shifts and Saturdays required.

Great opportunity for long term employment

Have the ability to lift up to 50 lbs and stand for 8–10 hour shifts

Facility is a non-climate-controlled environment

#nowhiring

Structural Welder

Structural Welders for our Centrally located client manufacturer of complex engineered skids.

• Structural welding in a shop environment.
• Ability to read blueprints, schematics Proficient with welding processes.
• Exceptional math and measurement skills.
• Qualified candidates must pass weld test 3G & 4G. MIG/Flux-core weld processes.
• Structural welding and fitting experience 3-5 years.
• Fit, cut and tack material.
• Prepare welding joints.
• Conventional and measuring instruments.
• Finish grinding applications using manual/power tools.
• Resume required.

1st shifts 6am to 6:30pm; Mon to Sat

2nd shifts 5:30pm to 4:00am; Mon to Sat. 2nd shift pay differential

Pay range: $25-$30 depends on experience

#nowhiring

Mechanical and Electrical Assemblers

Mechanical Assembler

• Perform manual processes to complete mechanical and sub-assemblies, using hand tools, and electronic and pneumatic tooling.
• Familiar with assembly and measuring tools, interpret visual aids and must be able to perform simple shop math.

Requirements: 

• Minimum one year working within a manufacturing environment. 
• Ability to read and interpret P&ID, ISO, and engineering assembly drawings
• Ability to read fabrications drawings is a plus
• May work at different workstations as production needs require or shift from one station to another during the assembly process.

Pay: $21 – $27; depends on experience

Shift: 1st shift 6:00 am – 5:30 pm. 10 to 12 hour shifts and Saturdays required.

Electrical Assembler

• Perform manual processes to complete mechanical and electrical assemblies and sub-assemblies, using hand, electric and pneumatic tooling
• Complete tasks as directed by manufacturing schedule with minimum supervision

Requirements:

• Familiarity with assembly and measuring tools, interpretation of visual aids and ability to perform simple shop math.
• Competency in reading and interpreting engineered drawings, schematics or other technical documents.

Pay: $21 – $27 depend on experience

Shift: 1st shift 6:00 am – 5:30 pm. 10 to 12 hour shifts and Saturdays required.

Have the ability to lift up to 50 lbs.

Expected to stand for 8–10 hour shifts

Facility is a non-climate-controlled environment

#nowhiring

Pipe Welder

Job Summary:

Pipe welder proficient in welding techniques

Duties: 

• Proficient in assigned welding techniques.
• Interpretation of mechanical drawings, including the ability to read weld symbols.
• Knowledge of wire and filler materials applications for various steel alloys, aluminum, and some exotic materials.
• Working knowledge of fixturing and weld set up parameters (amps, volts, etc.).
• Convention and precision measuring instruments.
• Process inspection, certification, and documentation. 
• Welding equipment maintenance and inspection.
• Finish grinding applications using manual and power tools.
• Safety and housekeeping.
• Other duties as assigned by supervisor.

Requirements: 

• Minimum 3+ year experience working within a manufacturing environment/facility 
• Able to lift up to 50 lbs.
• Able to stand for 8–10-hour shifts

Pay: $27-$33 depends on experience

Shift: 2nd shift – 6:00 pm – 5:30am, (flexible to 10-hour shifts/Saturdays required)

#nowhiring

Immediate Opening for a Control Process Operator in Mason!

Shift: Afternoon Shift | 4:00 PM – 1:30 AM | Monday – Friday (9-hour shifts)

Pay Rate: $18.00/hour + $1.50/hour shift premium ($19.50/hour total)

Position Summary:

We are seeking a skilled Control Process Operator to join our team in Mason, MI. In this role, you will set up and operate computer numerical controlled (CNC) machinery that heats, mills, cuts, forms, drills, broaches, or reams metal and processed material parts. You will make general decisions regarding quality, tolerances, and operation sequences while ensuring a safe and efficient work environment.

Core Responsibilities:

• Operate CNC machinery and mills to precisely cut or form parts.
• Troubleshoot and correct faulty machine programming.
• Read blueprints and tape measures proficiently to verify dimensions.
• Load and unload materials and safely transfer inventory to storage.
• Maintain quality standards, checking tolerances and operation sequences.
• Complete required production records and follow standard safety practices.
• Participate in safety committees or workplace initiatives as assigned.

Qualifications:

• Proven experience operating CNC machinery.
• Strong ability to read blueprints and tape measures.
• Sharp attention to detail, quality, and strict tolerance levels.
• Commitment to workplace safety and reliable attendance.

Apply today to join our team!

Forklift Operator

Pay Rate: $18.75 – $20.75 per Hour

Job Overview

We are seeking experienced Material Handlers/Forklift Operators to join our team. Candidates must have at least 6 months of recent forklift experience and be comfortable working in a fast-paced warehouse or manufacturing environment.

Responsibilities

• Safely operate forklifts to move materials throughout the facility
• Load and unload trucks efficiently and accurately
• Stage materials for production and shipping departments
• Transport raw materials and finished goods to designated locations
• Utilize RF scanners and inventory systems to track materials
• Maintain inventory accuracy and organize warehouse storage areas
• Follow all safety procedures and company policies
• Perform general warehouse and material handling duties as assigned

#nowhiring

Material Handler (Non-Forklift)

Location: Tucson, AZ

Job Type: [Temporary]

About the Role

We are seeking a reliable Material Handler to join our fast-paced warehouse team! In this role, you will manually move, organize, and track inventory. Please note: This position strictly does not involve forklift operation. Instead, you will use manual/electric pallet jacks, hand trucks, and carts to supply production lines and prepare orders.

Core Responsibilities

• Material Movement: Transport raw materials and finished goods using pallet jacks, dollies, and hand trucks.
• Receiving & Unpacking: Unload incoming trucks, verify packing slips, and report damages.
• Picking & Packing: Accurately pull items based on work orders. Pack, wrap, and label products securely.
• Inventory Control: Conduct cycle counts and track records using handheld RF scanners.
• Line Replenishment: Keep production areas stocked with parts to prevent workflow delays.
• Housekeeping: Maintain a clean workspace by breaking down cardboard and disposing of scrap

Requirements

• Ability to stand/walk for long periods and safely lift up to 50 lbs.
• Experience with RF scanners and manual/electric pallet jacks is a major plus.
• Strong attention to detail and a great team attitude.

#nowhiring

lifting 35 plus LBS standing for long hours

Medical Assembler – Arden Hills, MN (Near Roseville)

Temp-to-Hire Opportunity

No medical assembly experience? No problem! We provide paid training and are looking for dependable individuals with great attendance, attention to detail, and a willingness to learn.

Build Life-Saving Medical Devices and Make a Difference

Are you looking for a rewarding career where your work positively impacts lives? Join our team in Arden Hills, MN, and play a critical role in manufacturing innovative medical devices that help patients around the world.

We are seeking motivated, detail-oriented individuals to join our growing manufacturing team. Whether you have previous assembly experience or are looking to start a career in medical manufacturing, this could be the opportunity you’ve been waiting for.

Pay Rates

• 1st Shift: $18.00 per hour
• 2nd Shift: $20.25 per hour
• 3rd Shift: $21.50 per hour

Employment Type

• Temp-to-Hire
• Full-Time Opportunities

Available Shifts

1st Shift

Monday – Friday 6:00 AM – 2:00 PM Overtime as needed

2nd Shift

Monday – Friday 2:00 PM – 10:00 PM Overtime as needed

3rd Shift

Sunday – Thursday 10:00 PM – 6:00 AM Overtime as needed

What You’ll Be Doing

As a Medical Assembler, you will help manufacture high-quality medical devices in a clean, professional environment.

Responsibilities include:

• Medical device assembly
• Clean room assembly operations
• Working with small parts and components
• Scanning and tracking materials
• Labeling products and packaging
• Performing inspections and repairs
• Following detailed work instructions
• Maintaining accurate records and documentation
• Supporting inventory control processes
• Completing additional production tasks as assigned

Job Responsibilities

• Follow all company safety policies and procedures
• Perform hands-on assembly tasks with precision
• Maintain a clean and organized workstation
• Troubleshoot basic production issues
• Meet quality and production standards
• Inspect products to ensure compliance with specifications
• Work effectively in a team environment
• Accurately document production activities and inventory
• Support continuous improvement initiatives

What We're Looking For

Required Qualifications

• High School Diploma or GED
• Ability to read, understand, and follow instructions in English
• Strong attention to detail
• Basic math skills
• Basic computer skills
• Mechanical aptitude
• Excellent hand-eye coordination and manual dexterity
• Ability to use basic hand and power tools
• Ability to pass a drug screen and federal background check

Ideal Candidates Will Have

• Manufacturing or assembly experience
• Experience working with small parts
• Experience in a clean room environment
• Strong quality-focused mindset
• Dependability and good attendance

Why Work with ResourceMFG?

We are committed to helping our employees succeed by offering:

? Competitive Pay

? Weekly Pay

• Direct Deposit available
• Pay Card option available

? Health Benefits

? Retirement Plan Options

? Dedicated Recruiter Support

? Free Online Skills Training

? Career Growth Opportunities

? Temp-to-Hire Pathway

Apply Today!

Start your career with one of the world's leading medical device manufacturers while gaining valuable experience in a clean, high-tech production environment.

Apply now and take the first step toward a rewarding career in the medical device manufacturing industry!

Qualifications

• Education: Bachelor’s in Business, Engineering, Manufacturing, Industrial Tech (or equivalent leadership experience).
• Certifications: Lean Six Sigma Green Belt or higher.
• Experience: 5+ years high-volume manufacturing; 3+ years managing teams/supervisors.
• Industries: Automotive, industrial, or assembly preferred.
• Operations: Cementing, surface prep, or painting experience preferred; automation, robotics, or assembly.

Core Skills & Competencies

• Metrics: Driven to improve SQDCP (Safety, Quality, Delivery, Cost, Productivity).
• Tools: KPI development, visual management, production planning, scheduling, staffing, and resource management.
• Methodologies: Lean Manufacturing, Continuous Improvement, Root Cause Analysis, and quality systems.
• Tech: Implementing new equipment and manufacturing technologies.
• Leadership: Coaching, employee development, and leading cross-functional teams.
• Traits: Fast-paced multitasking, data-driven decision-making, and teamwork.
• Bonus: Bilingual communication.

Compensation

• Dependent on experience; regularly bench marked to match the local market.

#Nowhiring

• Lean Six Sigma (Green Belt or higher) – preferred • Leadership or Supervisory Training Certification – preferred • Valid Driver’s License – required • First Aid/CPR Certification – preferred, Experience in cementing, surface preparation preferred.

Hiring for Machine Operator in Franklin, IN!

Shift & Pay rate: Rotations days :12 hour – 6:55pm – 7:00am

Job Summary

We are seeking a reliable and detail-oriented Machine Operator to set up, operate, and maintain machinery in a manufacturing or production environment. The ideal candidate will ensure efficient production while maintaining high quality standards and adhering to safety guidelines.

Key Responsibilities

• Operate and monitor machinery to ensure proper functionality and efficiency
• Set up machines according to production specifications and guidelines
• Inspect finished products to ensure they meet quality standards
• Perform routine maintenance and basic troubleshooting of equipment
• Load raw materials and ensure smooth production flow
• Follow all safety procedures and company policies
• Keep work area clean, organized, and hazard-free
• Report equipment malfunctions or safety concerns to supervisors

Qualifications

• High school diploma or equivalent required
• Previous experience as a machine operator or in a manufacturing environment preferred
• Ability to read and interpret basic technical documents and instructions
• Strong attention to detail and quality control
• Basic mechanical skills and troubleshooting ability

Work Environment

• Manufacturing or warehouse setting
• May require standing for long periods
• May involve exposure to noise, dust, or moving machinery
• Use of personal protective equipment (PPE) required

6 months of experience or more required.

ResourceMFG is hiring Electronic Inspectors and Warehouse Associates in Bloomington!

Shift:

1st Shift – 7:00 AM – 3:30 PM

2nd shift – 10:30 PM – 7:00 AM

Pay Rate: $16.00 – $17.00/hour

Location: Bloomington, IN

Position Summary

We are seeking a dependable and detail-oriented Electronic Inspector / Warehouse Associate to join our team. This position is ideal for candidates who can utilize local transportation and are looking for a consistent 1st shift schedule. The role combines quality inspection of electronic components with warehouse duties to support daily operations.

Responsibilities

• Inspect electronic parts and products for quality and accuracy.
• Identify and report defects or discrepancies.
• Receive, store, and organize inventory.
• Pick, pack, and prepare orders for shipment.
• Maintain accurate records and inventory counts.
• Follow safety procedures and quality standards.
• Keep work areas clean and organized.

Qualifications

• Previous warehouse, inspection, production, or manufacturing experience preferred.
• Strong attention to detail.
• Basic computer skills.
• Ability to lift up to 50 lbs.
• Ability to stand, walk, bend, and perform repetitive tasks throughout the shift.
• Reliable attendance and strong work ethic.

#nowhiring

manufacturing experience preferred.

ResourceMFG is seeking Packagers & Formulate/Grind operators in Orleans, IN!

Immediate Start! Full – Time Long Term Temp job!

All shift available! 

Pay rate: $14-$15.50 Based on shift and department

Location: Orleans, IN 

Packaging Job Functions:

• Work safely and within the guidelines of the Sanitation and Q. A. Department to efficiently grade, pack and box ground beef patties to meet White Castle specifications and U.S.D.A. requirements.
• To work safely grading and straightening the ground beef patties as they come from the slicer to insure the wholesomeness of our product.
• To grade and pack the correct number of patty layers in a box.
• Compile and verify the correct number of boxes packed and report it to the supervisor.

Must have a High school diploma or GED Ability to work well with co-workers in a physically close environment.

The Japanese-English Translator/Interpreter serves as a critical communication bridge between Japanese-speaking and English-speaking team members within a fast-paced automotive manufacturing environment.

This role provides accurate interpretation and translation support for production operations, meetings, training, human resources activities, and business communications to ensure effective collaboration and operational excellence.

Provide consecutive and simultaneous interpretation between Japanese and English during Production meetings  Daily operational discussions Training sessions Safety meetings Human Resources interactions Management communications Translate written materials from Japanese to English and English to Japanese, including Standard Operating Procedures (SOPs) Work instructions Safety documents Training materials HR communications Internal correspondence Presentations and reports Support production, engineering, quality, and HR departments with language assistance Participate in shop-floor activities to ensure accurate communication regarding production issues, quality concerns, safety requirements, and process improvements.  Assist Japanese management personnel with employee communications and workplace initiatives. Maintain translation accuracy and confidentiality of sensitive business information Coordinate interpretation schedules and support departmental priorities Prepare and review translated documents for consistency and quality

Required Qualifications

• Native or near-native fluency in both Japanese and English (spoken and written).
• Bachelor's degree in Translation, Languages, Communications, Business, or a related field preferred.
• Minimum 2 years of professional translation/interpreting experience.
• Strong understanding of Japanese and American business cultures.
• Excellent verbal and written communication skills.
• Proficient in Microsoft Office applications.
• Previous experience in automotive manufacturing or industrial environments.
• Familiarity with manufacturing terminology, lean manufacturing concepts, and production processes.
• Experience supporting Japanese expatriate staff.
• Knowledge of HR, safety, quality, and production-related documentation.

Preferred Qualifications