The primary purpose of the Process Technician is to work with the Shift Supervisor to operate, troubleshoot, document, and communicate on all equipment that is not performing within specifications. This position may perform supervisory tasks such as: designating Packer / Handlers and other team members to meet production schedules, opening/closing the building as required, and overseeing employees in the absence of management. In performing these responsibilities, associates are to work safely, efficiently, and cooperatively in a manner that demonstrates team member involvement. This role requires leadership skills, good communication skills, the ability to think critically, learn new processes, be self-motivated, adapt to changes, and work in a fast-paced environment with a broad range of people.

Overall Responsibilities:

The list below highlights the essential job responsibilities but is not exhaustive.

• · Set up machines/equipment for operation, including material, color, molds, auxiliary equipment, etc.
• · Keep supervisor/management informed of all problems
• · Start-up machines and monitor quality to maintain appropriate sizes and standards
• · Make appropriate adjustments to machines to maintain efficient production levels and document appropriately
• · Oversee proper packaging procedures
• · Review production schedules and ensure machines are running production to meet customer demands
• · Respond to alarms and/or requests for assistance to correct machine malfunctions and/or Packer/Handler problems
• · Coordinate with Quality Assurance and Maintenance Departments concerning machine operations and malfunctions
• · Inspect scrap to prevent any usable product from being ground and record scrap numbers
• · Ensure housekeeping standards and all safety procedure are maintained
• · Ensure a smooth transition between shifts

Qualifications, Skills, Competencies:

• Prior blow molding experience is a plus
• Mechanical aptitude and literacy with equipment control panels for complex machines
• Ability to analyze product and mechanically understand equipment to get desired output
• Forklift Certification

 Physical Demands/Work Environment:

• This position will need to stand, bend, squat, kneel, crawl & reach. This position requires consistent use of arm(s), wrist, elbow with repeated squeezing and grasping. Will be required to lift up to 40 pounds.
• · May be exposed to loud noise (these areas require hearing protection).
• · May be exposed to plastic resin odors as a byproduct of the manufacturing process.
• · May be exposed to heat in excess of 100 degrees as a result of outside temperatures.
• · The employee is required to wear personal protective equipment.

Job Requirements:

• Able to lift up to 40 lbs. and be required to stand for the entire shift
• Able to work at a fast paced and manufacturing environment
• Able to stand or sit for 8-10 hours per day.
• Previous production and/or manufacturing experience not required.

Tampa Company hiring Machine Operators in the 33619 area!

1st Shift – 5AM-1:30PM

2nd Shift – 1:30PM-10PM

Pay:    $14.50/hr.

Job Responsibilities:

• Accurately read and interpret measurements using a tape measure or ruler

   

• Inspect and monitor the quality of cables received for processing

   

• Maintain a clean and organized work area, including tools and equipment

   

• Promptly report any conditions or actions that may jeopardize product quality or safety

   

• Use job travelers to identify job numbers, diagrams, and cable specifications

   

• Operate computers and related software for task tracking and data entry

   

• Locate and retrieve cables based on traveler documentation

   

  Physical Requirements:

  • Able to read tape measure/ruler

  • Ability to stand for a full 8-hour shift

  • Frequently lift, push, or pull up to 50 pounds 

  • Regularly walk, bend, stoop, kneel, and use both hands to grasp or handle objects

Job Requirements

• Must be able to communicate and read in English - Bilingual is preferred
• Must be able to lift up to 50lbs throughout shift
• Must be able to stand for duration of shift
• Must have Steel toe boots/shoes

New Exciting Job Opportunity as Dispatch/Traffic Control Associate

A Company That Works for You!
ResourceMFG, an established and well-respected leader in the Dairy market, is searching for reliable individuals to join our team as Dispatch/Data Entry Associate. Reliability and strong work ethic are qualities we look for in all of our associates. In return, you will earn competitive weekly pay and benefits, and a great company culture. Because when you work for ResourceMFG, you work for a company that treats you well and values your work, a company you can trust.
• Day Shift: 6am to 6pm, A&C shift/ 6pm to 6am B&D shift
• 15.00/hr
We Require Our Customers to Offer:
• Safe and clean work environment
• Employee focused workplace
• Safety programs and training
As a Dispatch/Traffic Control Associate We Offer You:
• Paycheck every Friday with direct deposit option
• Refer your friends and get a bonus for each one who meets the hours requirement
• Medical Benefits and Retirement Plan available
Dispatch/Traffic Control Associate Duties include:
• Able to validate and verify information contained from bill of laden.
• Able to correctly and accurately transfer information into spreadsheet.
• Able to Use and log in Military time.
• Check-in drivers- check seals, farm samples, etc.
• Go through manifest periodically and check accuracy.
• Gather information to properly update reports.
• Work as part of a team

Job Requirements as a Dispatch/Traffic Control Associate:
• Knowledge of basic math and problem-solving skills.
• Knowledge of computer, data entry, and basic office skills.
• Ability to follow directions and communicate well with the team.
• Ability to work in a fast-paced environment and multi-task.
• Ability to pay attention to detail.
• Excellent customer service skills and phone etiquette.
• Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb and/or sit frequently or through the duration of the shift.

We are seeking a hands-on, motivated Working Supervisor to lead production line operations, oversee shipping and receiving activities, and ensure safe, efficient material handling processes. This leadership role requires active participation on the floor—working alongside the team to meet production targets, properly sort materials, and ensure customer payments are processed accurately and efficiently.

The ideal candidate will have strong organizational skills, a commitment to safety, and the ability to motivate and guide a team in a fast-paced environment.

Location: Battle Creek, MI

Shift: 6:00 AM – 2:30 PM

Key Responsibilities:

• Supervise and lead a team of 5–6 employees in daily operations.

• Operate forklifts to support production lines and material movement.

• Monitor and manage production lines to ensure continuous workflow.

• Enforce safety protocols and maintain compliance with company standards.

• Oversee unloading of inbound materials, ensuring proper documentation.

• Ensure accuracy in shipping and receiving processes.

• Sort and identify recyclable materials to ensure correct customer payment.

• Maintain a clean, organized, and safe facility environment.

• Serve as the first-line leader for the team, providing direction and support.

• Communicate material flow updates, production issues, and progress reports to management.

Qualifications:

• Supervisory or leadership experience preferred.

• Proven forklift operation skills.

• Strong organizational and multitasking abilities.

• Leads by example with a positive, team-oriented approach.

• Basic understanding of warehouse safety protocols and OSHA standards.

• Reliable with excellent communication skills.

• Basic computer proficiency (e.g., email, data entry).

Physical Requirements:

• Ability to stand, walk, and operate equipment for extended periods.

• Must be able to lift up to 50 pounds.

• Comfortable working in a fast-paced recycling facility environment.

Looking for someone to work as an inspector at a rubber hose company in Haw River area. If you have quality experience please apply!

Hours: 7am-3:30pm

Pay $ 18.

This needs to be someone who is organized, has good reading comprehension, and able to learn the various types of products moving through our shipping department.

The job will consist primarily of checking pick tickets against products to ensure accuracy of the shipment. Other duties may include helping in shipping and/or inventory control, but only secondary to the primary job.

Petoskey Plastics is looking for 3rd Shift Machine Operators in Morristown, TN! 

8pm-8am (2,2,3 Schedule) – $18.53/hr

Seeking a full blown film extrusion operator to safely perform a combination of productions tasks, which may include set up of jobs, reading the production schedule, reading, and understanding work instructions and blueprints.

Must be proficient in: 

• Machine Building/Assembling 
• Mechanical Troubleshooting Skills 
• CAD Software 
• Machine Safety Inspections 
• Machine Setups for Production Runs 
• Troubleshooting CNC Machines 
• Plastic Extrusion Experience 
• Injection Molding Experience 
• Blow Molding Experience 
• Tool/Die/Mold Setup Experience 
• Blueprint Reading 

Machines & technologies you’ll use: 

• CNC Automation Solutions 
• Injection Molding Machine 
• CNC Lathe (2-4 axis) 
• Extrusion Machine 
• Blow Molding Machine 

• HSD/GED required
• 3 years of blown film extrusion experience preferred
• Ability to read production schedule, work order, and work procedures in English
• Problem solving and trouble shooting skills
• Mechanical aptitude

Dry Wall / Painter

Brownsville / Los Fresnos area home builder is adding candidates with 1 year of dry wall and painter.  Must have the ability to cross train in other areas.

For you …

• First Shift
• $15/hr to start
• Great coworkers and leadership

AND

While working with ResourceMFG Employbridge you will experience:

• Weekly Pay and Direct Deposit
• Free online training to enhance your career opportunities
• Access to Medical, Dental, Vision, Retirement, and Tons of Discount Programs
• Unlimited Referral Bonuses

Client expects 1 year or more of commercial or residential experience:

• Hanging Drywall 
• Tape, Float and Texture
• Measure and Cut Materials
• Interior and Exterior Painting
• Paint Guns, Roll and Brush
• Maintaining Painting Equipment
• Power and Hand Tools

Field Inventory Specialist

Pay $17.56

1st Shift: Monday – Friday 7AM – 3:30PM

Pacific and or Pevely locations

Duties and Responsibilities

• Maintain accurate inventory.                                                                                                                

• Perform cycle counts and audits.

• Assists in physical inventories.

• Receive in material from vendors and transfers.,

• Issue materials out to subcontractors. 

• Adhere to safety standards. 

Required Skills

• Ability to prioritize workflow. • Ability to work independently with little supervision. • Ability to stand and work outdoors for long periods of time. • Working knowledge of computer programs for entering data. 

• Microsoft Excel and Outlook. • Inventory or WMS system. 

Apply today to join our dynamic team!  

• We offer:
• Weekly Pay
• Benefits for all associates
• Free online courses to furthere your career!
• Unlimited $100 referral bonuses

Join the Resource Team and Apply Today!

#nowhiring

?? Join the Team Behind the Machines – Internal Logistics at a Major Vehicle Manufacturer! ??
Location: Buffalo, WV
Shift: Mid Shift
Starting Pay: $18.25/hour

Ready to be part of something big? ResourceMFG is hiring for Internal Logistics roles at a leading vehicle manufacturing facility in Buffalo, WV. This is your chance to step into the fast-paced world of automotive production with the essential work that keeps everything moving behind the scenes.

?? What You’ll Do:

• Support the internal flow of materials and parts
• Ensure timely delivery to production areas
• Work as part of a high-energy, team-oriented environment

?? What We Offer:

• Paid Training – No experience? No problem. We’ll train you!
• Health, Vision & Dental Insurance
• 8 Paid Holidays – After six months of employment
• Plant Shutdown Pay After six months of employment – Enjoy two paid plant shutdowns:
  • Third week of July
  • Week of Christmas
    (We pay 4 out of 5 days during each shutdown!)
• PTO – 32 hours of paid time off after just 90 days
• Annual Raises – Grow with us year after year

? Requirements:

• Must pass a clean drug screen
• Reliable and ready to work Mid Shift (2:00pm-10:30pm)
• Other shifts may become available
• Strong attention to detail and a team-first attitude
• Able to stand for 8 hours
• Able to walk potentially up to 15 miles per shift
• Safety first

Start your career with purpose and pride. Apply today and become part of the team that helps build the vehicles of tomorrow!

Preferred 6 months of recent experience operating power industrial equipment of any kind
Able to push, pull, bend and stoop in a fast-paced environment 8-10 hours
Must be able to potentially walk up to 15 miles a day.
Able to lift up to 40 lbs
Attention to detail
Able to work overtime as needed
Must have a solid work history
Reliable transportation
Safety 1st attitude!
Attendance is a must!
APPLY ONLINE AT www.resourcemfg.com

?? Job Opening: Sheet Metal Processor – Morning Shift
?? Location: Burton, MI
?? Shift: 7:00 AM – 3:30 PM (Monday–Friday)
?? Pay: $17–$19 per hour (based on experience)

About the Role:
Client is seeking a reliable and detail-oriented Sheet Metal Processor to join our team on the morning shift. In this hands-on role, you’ll be responsible for processing sheet metal components with precision and care, contributing to the high-quality standards our customers expect.

Key Responsibilities:

• Operate and maintain sheet metal processing equipment
• Measure, cut, and shape metal materials according to specifications
• Inspect finished products for quality and accuracy
• Follow safety protocols and maintain a clean work environment
• Collaborate with team members and supervisors to meet production goals

Qualifications:

• Previous experience in sheet metal processing or manufacturing preferred
• Ability to read and interpret technical drawings and measurements
• Strong attention to detail and commitment to quality
• Physical ability to lift, bend, and stand for extended periods
• Dependable, punctual, and a team player

Why Join Century Roll?

• Competitive hourly pay based on experience
• Consistent morning schedule with weekends off
• Supportive team environment
• Opportunities for growth and skill development

?? Now Hiring: Assemblers – Join Us at Our Hiring Event! ??

?? Date: Thursday August 7, 2025

?? Time: 10:00 AM – 3:00 PM
?? Location: Work One – 323 Dupont Dr, Seymour, IN 47274

Are you an experienced assembler looking for your next opportunity? We want to meet you!

We’re hosting an in-person hiring event exclusively for Assemblers

Requirements to Attend:

? Minimum 6 months of experience 

? Effective Communication in English both written and verbal

? Ready to interview on the spot!

What to Expect:

• On-the-spot interviews
• Immediate hiring opportunities
• Meet with our team and learn about our open positions

Bring your resume, a valid photo ID, and be prepared to discuss your experience. We’re excited to meet skilled professionals ready to take the next step in their career!

Now Hiring for Assemblers!

2nd shift hours of 3:30pm-12:00am

Pay based on experience from $17-$20/hr

We are seeking a meticulous and dependable Assembler to join our team on 2nd shift. If you enjoy hands-on work, solving mechanical challenges, and being part of a team that builds with accuracy, this is the role for you. You’ll play an essential part in assembling, packing, and preparing enclosures and components that power our operations.

Key Responsibilities:

• Assemble, transport, and pack enclosures and mechanical components
• Adjust for assembly of engines, enclosures, or related parts
• Handle testing and assembly inside and outside the immediate area
• Utilize correct fasteners, materials, and components based on torque ratings and application needs
• Maintain and properly use hand tools required for D-class operations including:
• • Impact sockets
  • Plumb bob
  • Slide square & chalk line
  • Breaker bar & weld helmet
  • Vice grips, striker, full wrench/socket sets

Apply Today- 

This position includes the opportunity to enroll in Medical, Dental, Vision, Term Life, and Short-Term Disability benefits, as well as a Retirement Plan. All Illinois talent are also entitled to accrue and use paid time off. Additional benefits information can be found here: https://www.resourcemfg.com/employees/benefits/

  #nowhiring

• Knowledgeable in fasteners, torque applications, and construction materials
• Mechanically inclined with experience in assembly or fabrication
• Able to read basic diagrams and follow precise instructions
• Strong attention to detail and safety-minded
• Equipped and ready to work with necessary tools

#nowhiring

Hiring Immediately! Entry Level Order Selectors! 

We will train the right candidate! 

Weekly productivity incentives as well! 

2nd shift 12:00pm-End of Production, average 45+ hours a week

Weekly overtime!

Pay: $18.50 per hour and weekly pay! 

Cold storage location for grocery distribution, 28-30 degrees! 

Very physical position- lifting cases that weigh 60+ lbs. through entire shift, ability to lift 100lbs overhead.

Job Information:

• Picking orders with walkie rider electric pallet jacks and voice head sets in a timely manner
• Utilize voice activated headsets to get orders
• Accurate and timely selection of product 
• Safely stacking product on your lift
• You will be standing and on your feet while you are working
• Great attendance is very important at this warehouse
• You will also keep a clean work area throughout your shift 

 Expectations: Arrive on time dressed appropriately pick orders with equipment and voice heat set in a timely manner keep work area clean

Ability to stand/walk for entire shift

Ability to work overtime as needed-shifts are 10-13 hours but could be longer

Ability to work in cold storage setting

Ability to stand/walk for entire shift

Ability to work overtime as needed-shifts are 10-13 hours but could be longer

Ability to work in cold storage setting

Ability to lift up to 60+lbs repetitively without assistance and up to 100lbs as needed without assistanc

Job Requirements

• Skilled in applying elastomeric foam and jacketing (PVC, aluminum)
• Able to measure, cut, and install clean, sealed insulation 
• Self-directed and reliable
• 1 year of experience performing insulation tasks

NOW HIRING MOLDING MACHINE OPERATORS FOR 11-MONTH CONTRACT IN TUCSON!
BI-WEEKLY PAY
$18.00/HOUR 6am-6pm Scheduled Days Vary
$19.00/HOUR 6pm-6am Scheduled Days Vary

WILL TRAIN!

At ResourceMFG We Offer You:
Weekly pay (Direct Deposit or ATM Debit Card available)
Access to health benefits and retirement plan
A personal recruiter to help with job searches and assistance when at work!
FREE ONLINE skills training

Job Responsilbities:
Follow safety guidelines
Follow standard work instructions as assigned
Perform hands-on tasks
Stand, bend, and reach

Blender Mixer/Operator

Now Hiring for a nice Company in the Fenton area

Blender Mixer / Operator

Job Summary:  Cuts and dumps raw materials into blending equipment.  Package and palletizes finished product.

Duties:

• Mixing and Blending dry flour and spices
• Stacking and palletizing bags of flour and mixes
• Accurately Micro Ingredient weighing
• Batch Set-Up
• Quality control
• Heavy lifting
• Great attention to detail and ability to calculate numbers 

#nowhiring

ResourceMFG is seeking Mechanical Assemblers in Imperial, PA!

1st shift: Monday – Friday | 7:00am – 3:30pm

$18.00 per hour

Join a company where quality, teamwork, and hands-on skill come together! We’re seeking a Mechanical Assembler to support a production team with the assembly of high-quality products using various hand and power tools.

??? Key Responsibilities:

• Perform mechanical assembly using drills, saws, punches, and pneumatic hand tools

• Maintain high quality standards throughout the assembly process

•  

  Complete additional duties as assigned by supervisors or leads

? What You Bring:

• 1 year of manufacturing experience with equipment and production processes

• Ability to read a tape measure accurately

• Basic math skills for measurements and part calculations

• Physically able to lift up to 50 lbs

• Comfortable using hand and power tools safely

• Strong focus on safety, precision, and cleanliness

• Fast learner, adaptable to different jobs daily or weekly

• Analytical mindset and problem-solving ability

Apply Now

Apply Now

Climate Controlled – Skill Pay  

ResourceMFG has you covered with production associate positions available in Murfreesboro, TN.  Enjoy a climate controlled environment manufacturing yogurt!    Also, receive pay increases as you learn new skills! 

Shifts and Pay

• 1st – 6:45am – 3:15pm – $16.00
• 2nd – 2:45pm – 11:15pm – $16.50
• 3rd – 10:45pm – 7:15am – $17.00

• Up to a $2.00 increase possible with skill pay

Perks:

• Climate Controlled  
• Weekly Pay with Direct Deposit Options
• Medical, Dental, and Vision Benefits available
• $100 Referral Bonus – invite your friends to work and earn extra money
• ResourceMFG is proud to offer the Better Work-life Academy through Penn Foster. This program allows you to take FREE online courses to improve your workforce skill set

Production Associate  Job Description:

• Pick and pack food on production lines
• Quality checking of food production
• Eye for detailed product inspections
• Cleaning up boxes/trash and general cleaning
• Sanitation of production lines and equipment
• Measuring food products

Requirements:

• No High School Diploma or GED required
• No prior manufacturing, production, or factory experience needed to start
• No previous experience required
• Ability to lift up to 50 pounds.
• Able to stand, stoop and bend.

This is a full time; temp to hire position based on attendance and performance. We are hiring immediately.

APPLY Now and schedule your interview today!

ResourceMFG is seeking a CNC Router Operator to operate CNC router equipment and machines related to the fabrication of wood.

The CNC Router Operator ensures that machinery is operating correctly and efficiently while maintaining high standards of safety and product quality.

Job Duties/Responsibilities:   

•  Set up, operate, and troubleshoot the CNC machine
• Performs routine maintenance on the CNC machine
• Work with custom parts and designs
• Perform tool changes and adjust tool offsets to ensure precision and adherence to design specifications
• Performs other related duties as assigned by supervisor or management- contributing to team goals and production efficiency.

 Rewards: 

• Temp to hire
• Weekly Pay
• Medical and Dental options

• Basic computer skills
• Experience with CNC routers, overarm routers, table routers, table saws, and miter saws strongly preferred
• Experience with CNC software (woodWOP7 or similar software) strongly preferred
• Strong attention to detail as each employee is responsible for the quality of the product they produce
• Ability to read blueprints
• Ability to use and read precise measuring tools such as tape measure and calipers

APPLY NOW!

#nowhiring

General Overview: Provides maintenance support to all departments and ensures that all machinery and equipment are in safe working order within the facility. Troubleshoots and repairs all electrical/electronic, hydraulic, pneumatic and HVAC equipment. Programs and reprograms controllers. Must have a working knowledge of A/C-D/C high and low voltage electricity, plumbing, pneumatic and other skills necessary to perform the job.

Overall Responsibilities:

The list below highlights the essential job responsibilities but is not exhaustive.

• Performs maintenance and troubleshoots equipment as needed following proper LOTO procedures.
• Performs PLC troubleshooting and programming
• Demonstrates electrical troubleshooting and repairs such as motor starters, relays, and start/stop circuits
• Performs established PM procedures on machinery, equipment, and fire pumps.
• Repairs and rebuilds hydraulic, pneumatic, and electrical components.
• Ability to work with electronic work order and PM system
• Troubleshoot and diagnose AC and DC drives
• Troubleshoots and diagnose HVAC equipment.
• Maintains good housekeeping in the maintenance shop and follows 5S system.
• Must have knowledge and demonstrate troubleshooting and repairs of transformers on AC and DC circuits, step up, step down, and isolation transformers
• Maintain mechanical and electrical operations for all plant processes
• Must have three phase electrical and industrial environment experience
• Demonstrates a willingness to help coach and train other team members and coworkers as needed

Qualifications, Skills, Competencies:

• Proficiency in PLC troubleshooting, electrical troubleshooting, motor starters, relays, and start/stop circuits

• Must be Mechanically proficient in industrial maintenance
• Ability to perform tasks requiring critical thinking
• Ability to use volt and amp meters correctly for troubleshooting
• Ability to prioritize equipment issues and problems
• Communication, professionalism, and time management skills
• Safe work habits & methods

Education/Experience:

• Associate’s degree or 5 years equivalent experience in industrial maintenance
• Focus on Electrical Technology a plus
• LOTO and Arc Flash training a plus

Overall Responsibilities:

The list below highlights the essential job responsibilities but is not exhaustive.

• Performs maintenance and troubleshoots equipment as needed following proper LOTO procedures.
• Performs PLC troubleshooting and programming
• Demonstrates electrical troubleshooting and repairs such as motor starters, relays, and start/stop circuits
• Performs established PM procedures on machinery, equipment, and fire pumps.
• Repairs and rebuilds hydraulic, pneumatic, and electrical components.
• Ability to work with electronic work order and PM system
• Troubleshoot and diagnose AC and DC drives
• Troubleshoots and diagnose HVAC equipment.
• Maintains good housekeeping in the maintenance shop and follows 5S system.
• Must have knowledge and demonstrate troubleshooting and repairs of transformers on AC and DC circuits, step up, step down, and isolation transformers
• Maintain mechanical and electrical operations for all plant processes
• Must have three phase electrical and industrial environment experience
• Demonstrates a willingness to help coach and train other team members and coworkers as needed

Qualifications, Skills, Competencies:

• Proficiency in PLC troubleshooting, electrical troubleshooting, motor starters, relays, and start/stop circuits

• Must be Mechanically proficient in industrial maintenance
• Ability to perform tasks requiring critical thinking
• Ability to use volt and amp meters correctly for troubleshooting
• Ability to prioritize equipment issues and problems
• Communication, professionalism, and time management skills
• Safe work habits & methods

Education/Experience:

• Associate’s degree or 5 years equivalent experience in industrial maintenance
• Focus on Electrical Technology a plus
• LOTO and Arc Flash training a plus

We are looking for experience Shipping & Receiving/Craters for a temp to hire position in Littleton!!

Pay: $22-$25/hr

Schedule: Monday-Friday 7:30am-4:00pm

Job Description:

You will be working in the shipping and receiving department getting items ready to be shipped to customers.

Responsibilities:

• Measure and weight products for shipping.
• Pull products off shelves and wrap them to prepare them for shipment.
• Custom box, packing and crating of items.

Qualifications:

• Ability to learn fast and work in a fast-paced environment.
• Ability to lift 50-60 pounds.
• Must be able to read a measuring tape.
• Previous experience with power tools including saws, electric staplers and electric nail guns.

Employbridge is now hiring CNC MACHINISTS in FRASER, MI!

Shift: 3pm-11pm

Must be available to train on 1st shift: Monday-Thursday 6:00 am-4:30 pm

Pay: Up to $28 per hour based on experience

Precision machining company specializing in high-quality components for aerospace, defense, medical, and other demanding industries. The CNC Lathe Operator is responsible for setting up and operating CNC turning machines to manufacture parts that meet exact specifications. This role requires hands-on experience with CNC lathes, strong blueprint reading skills, and a commitment to precision and efficiency.

Job Duties:

• Set up and operate CNC lathes to produce precision components.

• Load raw materials and set tooling in accordance with setup sheets and engineering drawings.

• Interpret blueprints and specifications to determine machine setup and operations.

• Monitor machining operations to detect issues with tooling, materials, or machine performance.

• Measure and inspect finished parts to ensure they meet quality and dimensional standards.

• Perform routine machine maintenance and ensure proper machine calibration.

• Make program edits as needed to ensure optimal performance and part accuracy.

• Maintain production records and complete quality documentation.

• Collaborate with team members and supervisors to improve processes and throughput.

• Comply with all safety standards and maintain a clean, organized work area.

Qualifications:

• High school diploma or equivalent

• 3+ years of experience operating and setting up CNC lathes.

• Proficient in reading and interpreting mechanical drawings and GD&T.

• Strong understanding of CNC programming fundamentals (G-code, M-code).

• Familiarity with Fanuc or similar CNC controls.

• Skilled in using precision measuring instruments (micrometers, calipers, indicators).

• Excellent attention to detail and quality.

• Strong problem-solving skills and mechanical aptitude.

• Ability to work independently and as part of a team in a fast-paced environment.

Production Associates-Graveyard Shift

Open Production positions in Seattle for an Aerospace company

Graveyard shift: 9pm to 5:30am (training on 2nd shift- 1:15pm – 9:45pm)

• Pay: $20.96/hour
• Weekly pay
• Long term
• Temp to hire

Job Description:

• High attention to detail
• Masking product to be painted or sandblasted
• Packaging
• QC
• Processing parts
• Other general production duties

Requirements:

• Able to stand for 8 to 10 hour shifts
• attention to detail
• ability to read blueprints
• Computer skills

ResourceMFG/Employbridge is an equal opportunity employer and considers qualified applicants for employment without regard to sex, race, color, religion, ethnic or national origin, gender, sexual orientation, gender identify or age or any other characteristics or status protected by national, federal, state, or local law.

Immediate Need for 1st Shift Medical Assemblers in Maple Grove, MN

Temp to Hire Position

Work in Maple Grove at a premier medical device manufacturing company, building life saving devices, for patients worldwide. This client is looking for dependable, and dedicated associates to add to their growing company. Do you want to help make a difference, worldwide?  Do you have reliable transportation and can work everyday you are scheduled to work? This may be the job for you!  Apply or call our office to go over requirements.

$100 Unlimited Referral Bonuses

1st Shift – $18.00/Hour

• Monday – Friday 5:30am – 1:30pm 
• Monday – Friday 6:00am – 2:00pm

1st Shift Assembler Job Details:

• Perform hands-on tasks
• Assemble small part medical devices in clean room environment
• Accurate recordkeeping and inventory documentation
• Inspection of product

On Site Perks

• Paid Lunches
• Onsite Fitness Center
• Onsite Cafeteria

Working for ResourceMFG
If you’re looking for a job in manufacturing, ResourceMFG specializes in you! We are America’s largest staffing company with over 30 years in business, putting more than 24,000 people to work nationwide, each week. A company that treats you like family, we’re committed to providing equal opportunities to all, a healthy and safe work environment, fair pay and the tools to succeed and grow.

As a ResourceMFG Assembler We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

 Apply Now!

• Able to use basic hand and power tools
• Basic Math
• Basic computer skills
• Ability to read, speak, and take directions in English
• Complete Drug Screen and Federal Background Check
• High School Diploma or GED