Now Hiring Warehouse Associate

• Job Site: Camarillo, CA
• Full Time
• Monday-Friday: $17-$18/ hour DOE

Job Responsibilities: 

• Performs general warehouse duties from creating boxes, packaging ice, pulling orders and helping support shipping and receiving. 
• Ensures all information pertaining to products received and products shipped are updated accurately in Microsoft Navision software/BC mobile app for accurate inventory control. 
• Performs cleaning tasks, including but not limited to, sweeping, taking out trash, removing cardboard boxes, and clearing the parking lot at the end of each day to ensure the Warehouse is a clean and safe work environment.   
• Keeps management informed of any situations that could impact the delivery of on time and/or in full shipments of product. 
• Ensures compliance with and/or follows all organizational systems, programs, training, policies, and procedures as required and complies with relevant legal mandates. Seeks guidance as necessary. 
• Actively supports and participates in the safety program, both for self-protection and the protection of other employees, by reading and abiding by all requirements in the Safety Manual and Injury Illness Prevention Program (IIPP). 
• Carries out all responsibilities in an honest, ethical and professional manner. 
• Must be able to fulfill essential job function in a consistent state of alertness and safe manner.
• Handles various other duties as delegated by Operations Manager. 

• High School Diploma or equivalent GED required
• Minimum of 1 years of experience in a warehouse environment in shipping required
• Computer literate
• Hand-held scanner experience preferred
• UPS, FedEx experience preferred

Hiring Immediately! Entry Level Order Selectors! 

We will train the right candidate! 

Weekly productivity incentives as well! 

2nd shift 12:00pm-End of Production, average 45+ hours a week

Weekly overtime!

Pay: $18.50 per hour and weekly pay! 

Cold storage location for grocery distribution, 28-30 degrees! 

Very physical position- lifting cases that weigh 60+ lbs. through entire shift, ability to lift 100lbs overhead.

Job Information:

• Picking orders with walkie rider electric pallet jacks and voice head sets in a timely manner
• Utilize voice activated headsets to get orders
• Accurate and timely selection of product 
• Safely stacking product on your lift
• You will be standing and on your feet while you are working
• Great attendance is very important at this warehouse
• You will also keep a clean work area throughout your shift 

 Expectations: Arrive on time dressed appropriately pick orders with equipment and voice heat set in a timely manner keep work area clean

Ability to stand/walk for entire shift

Ability to work overtime as needed-shifts are 10-13 hours but could be longer

Ability to work in cold storage setting

Ability to lift up to 60+lbs repetitively without assistance

manner keep work area clean

Ability to stand/walk for entire shift

Ability to work overtime as needed-shifts are 10-13 hours but could be longer

Ability to work in cold storage setting

Ability to lift up to 60+lbs repetitively without assistance and up to 100lbs as needed without assistance

We are currently seeking Industrial Assemblers and Machine Operators to join our team in Largo, FL. This is a great opportunity for reliable, hardworking individuals who are mechanically inclined and eager to grow in a manufacturing environment. 1st & 2nd Shift available.

Pay rates: 

1st shift:  $16.58/hr.-$17.57/hr.

2nd shift:  $18.08/hr.-$19.07/hr.  

3rd Shift:  $18.33/hr.-$19.32/hr. 

 Assemblers:

• Assemble mechanical or electronic components using hand or power tools

• Follow work instructions, diagrams, and blueprints

• Perform quality checks on assembled products

• Maintain a clean and safe work area

Machine Operators:

• Set up, operate, and monitor machinery according to specifications

• Perform routine machine maintenance and troubleshoot issues

• Inspect parts for quality and accuracy

• Keep accurate production and maintenance records

#nowhiring

Qualifications:

• High school diploma or GED preferred

• Previous manufacturing or assembly experience is a plus

• Ability to use hand tools, read schematics, and follow instructions

• Comfortable standing, bending, and lifting up to 50 lbs for extended periods

• Strong attention to detail and commitment to safety

• Willingness to work in a fast-paced environment and meet production targets

Machine Operator – All Shifts

Location: Columbus, IN
Pay: $19.00 – $20.50/hour
Shifts Available: Day, Afternoon, Evening and Overnight

About the Role:

We are hiring Machine Operator Associates to join our fast-paced manufacturing team in Columbus, IN. This is a great opportunity to start or grow your career in automotive manufacturing with a global leader in precision components.

Key Responsibilities:

• Assemble automotive components according to specifications
• Operate hand tools and machinery safely and efficiently
• Inspect parts for quality and accuracy
• Maintain a clean and organized work area
• Follow safety procedures and company policies

Requirements:

• Ability to work in a fast-paced environment
• Strong attention to detail
• Ability to stand for extended periods and perform repetitive tasks
• Willingness to work any shift as needed

Benefits:

• Competitive pay starting at $19.00/hour, up to $20.50/hour depending on shift
• Shift premiums and overtime opportunities
• Health, dental, and vision insurance
• Paid time off and holiday pay
• Advancement opportunities within the company

#nowhiring

Production Associate – Spray Dryer (2nd Shift)

Location: Seymour, IN
Pay: $18.00/hour
Shift: 2nd Shift

About the Role:

We are seeking a reliable and motivated Production Associate to join our team at our Seymour, IN facility. This position is focused on operating spray dryer equipment and supporting various manufacturing processes in a dynamic production environment.

Key Responsibilities:

• Operate spray dryer and other manufacturing equipment safely and efficiently
• Complete batch records and maintain accurate documentation
• Monitor production processes and ensure quality standards are met
• Maintain cleanliness and organization of work area
• Follow all safety protocols and company procedures

Requirements:

• Ability to lift up to 40 lbs regularly
• Ability to stand for extended periods of time
• Strong attention to detail and commitment to quality
• Previous manufacturing experience preferred but not required
• Must be able to work 2nd shift hours

Benefits:

• Competitive hourly wage
• Opportunity for growth within the company
• Supportive team environment

Assembly Associate – All Shifts

Location: Columbus, IN
Pay: $19.00 – $20.50/hour
Shifts Available: Day, Afternoon, Evening and Overnight

About the Role:

We are hiring Assembly Associates to join our fast-paced manufacturing team in Columbus, IN. This is a great opportunity to start or grow your career in automotive manufacturing with a global leader in precision components.

Key Responsibilities:

• Assemble automotive components according to specifications
• Operate hand tools and machinery safely and efficiently
• Inspect parts for quality and accuracy
• Maintain a clean and organized work area
• Follow safety procedures and company policies

Requirements:

• Ability to work in a fast-paced environment
• Strong attention to detail
• Ability to stand for extended periods and perform repetitive tasks
• Willingness to work any shift as needed

Benefits:

• Competitive pay starting at $19.00/hour, up to $20.50/hour depending on shift
• Shift premiums and overtime opportunities
• Health, dental, and vision insurance
• Paid time off and holiday pay
• Advancement opportunities within the company

#nowhiring

ResourceMFG has openings available at Hershey Chocolate in Robinson, IL

DETAILS

2nd shift

Flexible schedule but must be able to work Saturday or Sundays as needed

6pm-6am schedule

This is a general labor position.  Associates will complete various tasks in a food manufacturing facility including packaging and palletizing.

Must have a H.S. Diploma or GED

Must be able to stand or sit for entire 12 hour shift

Must be able to lift  35 lbs

Previous manufacturing a plus

Steel toe shoes required

Company located in Largo, FL is NOW HIRING 1st and 2nd shift Forklift/Cherry Pickers operators.

This amazing company is offering Weekly pay, Medical benefits and more!

Apply Now!

This opportunity offers You:

•  Clean facility!
•  Long term positions with stability and opportunity to grow!
•  Competitive Weekly- pay
•  Medical, Dental & Vision

Job Responsibilities:

Forklift Cherry Picker experience is required.  Minimum of 2 years of recent experience. 

• Operating a Cherry Picker moving product around a very large warehouse (you will be certified once you start with the company).
•  Pallet Jack operation

Job Requirements:

• Able to work in a non-air-conditioned environment
•  2 years minimum of recent experience operating a Cherry Picker is required. 
•  Will be required to stand/sit for entire shift.
• Able to lift 40-50lbs
• Able to work mandatory overtime during the week and on Saturdays when needed

Hours:

• 1st shift:  Monday to Friday 7am to 3:30pm **(Overtime might come as early as 5 or 6am when needed)
  **Some Saturdays might be required for a few hours when needed**
• 2nd shift:  Monday to Friday 7am to 3:30pm **(Overtime might come as late as 1 or 2am when needed)

Pay:

• 1st Shift:  $18/hr.
• 2nd Shift:  $19/hr.  

Benefits of working with us:

• Medical, Dental and Vision benefits 
• Holiday pay
• Advance pay
• Weekly pay
• Overtime when needed

 #nowhiring

Skills: 

• Able to lift up to 40lbs. and stand for the entire shift. 
• Able to work at a fast paced and manufacturing environment. 
• Minimum of 2 years of Cherry Picker experience is required.  

ResourceMFG has Production Operator openings in Brazil, IN!

 Details

• Monday – Friday schedule but must be able to work overtime as needed
• Direct Hire opportunity
• $21-$22 an hour depending on shift

What a typical day looks like

• Operate production lines adhering strictly to standard operating procedures.
• Accurately record hourly readings and process information
• Perform minor maintenance tasks to maintain line
• Prepare and pack out finished product
• Safely load and offload material using a forklift

Requirements

• Previous forklift & manufacturing experience
• Able to work overtime as needed
• High school diploma or GED
• Basic computer skills
• Strong attention to detail
• Problem solving skills

Company located in Clearwater, FL is hiring now for a Mechanical General Assemblers.  

Pay rate:  $18+/hr. 

1st Shift  (Monday-Friday) 7am to 4pm.  (Must be able to train schedule from 8am to 5pm for 2 weeks) 

Job Description:

• Perform assembly operations to build light fixtures and accessories with quality in mind.
• Read and follow work order instructions and assembly schematics.
• Assembly requires riveting using a compressed air rivet gun, siliconing parts, twisting on parts, cleaning finished products and bagging.
• Occasionally spray paint,sand blast or polish parts.
• Soldering electronics
• Speed of assembly and quality of final assemblies is how your performance will be measured-avoid re-work and quality returns.
• Observe and follow safety guidelines specific to your work area.
• Maintaining work space and assigned tools clean and orderly-daily and weekly.
• Cross-train and work in all areas of production as work load requires it.

APPLY NOW! 

Benefits of working with us:

• Health, Vision and Dental Insurance

• Holiday pay
  
• Weekly pay
• Long term job opportunities with stability
• 40 hours plus over-time when needed

#nowhiring

Required Experience & Qualifications:

• Experience working in a manufacturing/production environment is preferred.
• Experienced using basic hand and power tools.
• Able to read and follow work orders, assembly instructions and basic technical drawings.
• Good communication and positive attitude.
• Soldering experience is a plus!

Physical Demands:

You will be working in a manufacturing facility, where we are machining, welding, soldering,powder coating and assembling parts from raw aluminum bars to finished product, in a production building with CNC Machines, Powder Coating spray and oven, Soldering, Polishing, TIG Welding, Chemical washes and spray paints.

Must be able to select, lift, carry, and stack product weighing between 30 and 50 pounds.

Must be able to sit and/or stand at a work station for 8 hours, with breaks while occasionally bending, stooping, and twisting and do repetitive work 2 to 4 hours at a time. This position requires manual dexterity and constant use of hands to assemble using manual and power tools.

Interested in working for a great company that will offer you a career path and great benefits?! Resource MFG is the answer you are looking for!

Position: Mechanical Technician Starting Pay Rate: $33 per hour Work Schedule: Monday–Friday, 7:00 AM to 3:30 PM Employment Type: Temp to Hire (based on performance and attendance)

Duties Include

• Read and interpret equipment manuals and work orders to perform maintenance and repairs
• Performs set ups and preventative maintenance on liquid filling equipment.
• Maintains, repairs and installs improvements for plants pneumatic system, tanks and plant plumbing.
• Clears and lubricates machine parts such as shafts, pulleys, gears, and bearings.
• Replaces or repairs machine belts.
• Connects wire to motors, fixtures, and other electrical equipment, replaces switches and fuses, and splices wire and insulates wire with friction tape.
• Cuts out and joins (welds or solders) parts for worktables, benches, shelves and other equipment.
• Rebuild and fabricate parts.
• Able to work in a fast-paced environment

Job Requirements

• 2 -3 year of related experience in process-oriented fluid manufacturing, warehouse/shipping operations and/or related industry
• Able to lift 50 lbs
• Machine Mechanical repair
• Must be able to read, write, and understand English
• Good work attitude and team player

Benefits

1. Full Medical Insurance
2. Dental and Vision Insurance
3. Full-time work
4. 5 Sick Days
5. $100 Referral Bonus

Non-Conforming Material (NCM) & Board Analysis Technician – Warehouse

 Buford, GA 

 Pay: $18–$19/hr

Job Description

We are seeking a detail-oriented and technically skilled NCM & Board Analysis Technician to join our warehouse operations team. In this role, you will be responsible for analyzing, diagnosing, and repairing non-conforming materials and circuit boards to ensure quality, functionality, and production efficiency. You will collaborate with cross-functional teams to identify root causes of failures, implement corrective actions, and help reduce waste and scrap.

Key Responsibilities

• Conduct thorough analysis of non-conforming materials and failed boards on production lines.
• Utilize advanced technical expertise in circuit board diagnostics and repair to restore functionality.
• Apply knowledge of board architecture and failure modes to identify root causes of defects.
• Perform component-level repairs when feasible to support continuous production.
• Collaborate with engineering, quality, and operations teams to implement corrective actions.
• Track, document, and report issues and solutions to reduce recurrence and improve processes.
• Support efforts to minimize production downtime and maintain compliance with quality standards.

Qualifications

• Previous experience in electronics, board repair, or diagnostic testing preferred.
• Strong analytical and problem-solving skills with attention to detail.
• Ability to read and interpret schematics, diagrams, or technical documents.
• Experience in a warehouse, manufacturing, or production environment a plus.
• Ability to work independently as well as part of a team.
• High school diploma or equivalent (technical training or certification in electronics preferred).
• Attendance is key 

What We Offer

• Competitive pay: $18–$19/hr
• Opportunities for growth in a technical and fast-paced environment.
• Collaborative and supportive team culture.

Non-Conforming Material (NCM) & Board Analysis Technician – Warehouse

 Location: [Insert City/State]

 Pay: $18–$19/hr

Job Description

We are seeking a detail-oriented and technically skilled NCM & Board Analysis Technician to join our warehouse operations team. In this role, you will be responsible for analyzing, diagnosing, and repairing non-conforming materials and circuit boards to ensure quality, functionality, and production efficiency. You will collaborate with cross-functional teams to identify root causes of failures, implement corrective actions, and help reduce waste and scrap.

Key Responsibilities

• Conduct thorough analysis of non-conforming materials and failed boards on production lines.
• Utilize advanced technical expertise in circuit board diagnostics and repair to restore functionality.
• Apply knowledge of board architecture and failure modes to identify root causes of defects.
• Perform component-level repairs when feasible to support continuous production.
• Collaborate with engineering, quality, and operations teams to implement corrective actions.
• Track, document, and report issues and solutions to reduce recurrence and improve processes.
• Support efforts to minimize production downtime and maintain compliance with quality standards.

Qualifications

• Previous experience in electronics, board repair, or diagnostic testing preferred.
• Strong analytical and problem-solving skills with attention to detail.
• Ability to read and interpret schematics, diagrams, or technical documents.
• Experience in a warehouse, manufacturing, or production environment a plus.
• Ability to work independently as well as part of a team.
• High school diploma or equivalent (technical training or certification in electronics preferred).
• Attendance is key 

What We Offer

• Competitive pay: $18–$19/hr
• Opportunities for growth in a technical and fast-paced environment.
• Collaborative and supportive team culture.

CNC Cutlister – Alcoa,TN

1st Shift – 7:30am-4pm

Pay Based on Experience – $18-20/hr

Cutlister generates detailed lists of parts and machining requirements from design specifications, using CAD software like Cabinet Vision or KCD, to program machinery and direct production. Key responsibilities include reviewing designs, creating accurate cutlists with specific materials and dimensions, coordinating with production and other departments, and optimizing material usage to reduce waste and ensure project compliance. 

- High School Diploma or GED (College or Technical Training preferred)

- Microsoft Excel experience

- Strong computer skills and experience with specialized design and cutting software (e.g., Cabinet Vision). 

- Ability to analyze complex design specifications and translate them into clear, actionable cutlists. 

- Excellent communication and teamwork skills to work effectively with design, production, and installation teams. 

- Familiarity with manufacturing processes and materials to optimize designs and reduce waste. 

#nowhiring

Owensville Manufacturing Facility Seeking Light Assembly Associates on 1st Shift. IMMEDIATE START!

Shifts/Hours/Pay:

• 1st shift 7:00am-3:30pm Pay 
• Mandatory overtime and Saturdays as needed

Job Summary:

• Assembles fabricated parts at floor stations.
• Tests and calibrates parts and mechanisms to meet tolerances and product specifications.
• Uses hand tools and power tools to assemble units to product specifications.
• Identifies units that fail tests or tolerance levels and repairs as necessary

Duties:

• Entry level Light Assemblers responsibilities include assembling, wiring, and adjusting precision units.
• May be required to assemble non-standard units.

Benefits:

• Hiring Immediately
• Weekly Pay
• Pay card or Direct Deposit
• No screening Fees
• Affordable health insurance
• FREE online education classes available
• Unlimited referral bonuses

 Open Interviews, Monday-Friday 9 am-3 pm

ResourceMFG NOW HIRING Sit Down Forklift

Location: Lafayette, Indiana

Shift: Day 6:00 am – 4:00 pm or Evening 4:30 pm – 2:00 am

Pay Rate: $16.50 – $17.50 per hour

This position is responsible for a variety of warehouse tasks, including but not limited to forklift operations, receiving operations, and cycle counts of inventory.  Requires the highest level of accuracy due to customer expectations. 

We Require Our Customers to Offer:

• Safe and clean work environment
• Employee focused workplace
• Safety programs and training

As a ResourceMFG Production Associate We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

#nowhiring

Job Requirements:

• Prior Forklift experience
• Moves parts from trucks onto the production floor to add to our inventory.
• Maneuver empty racks into the sequencing area as sequencers need.
• Occasionally need to pull parts from designated part racks and place said parts into the staged racks for the customer.
• Check said work for accuracy and check said parts for damages.
• Review computer printout for accuracy regarding the staged racks.

Job Title: Welder
Location: Coon Rapids, MN
Schedule: Monday–Friday, 7:15 AM – 3:45 PM | Overtime Available
Pay Rate: $30+ per hour, based on experience

Position Overview

We are seeking a skilled Welder to join our team in Coon Rapids, MN. This role offers a unique opportunity to work in a hands-on, independent environment with the potential to grow into a Lead Welder position as operations expand. The ideal candidate will be highly motivated, detail-oriented, and committed to producing precise, high-quality welds while maintaining a strong focus on safety and continuous improvement.

Key Responsibilities

• Perform orbital welding on high-purity components.

• Operate and maintain in-house laser welding equipment.

• Utilize TIG welding techniques to ensure accuracy and consistency.

• Read and interpret blueprints and technical drawings.

• Comply with all quality, safety, and regulatory standards.

• Assist with cross-training in other production areas, including assembly, cutting, and tube production.

• Support process improvement initiatives and help maintain welding equipment.

Qualifications

• 3–4 years of welding experience (orbital or TIG strongly preferred).

• Familiarity with robotic welding systems is a plus.

• Ability to lift 40–50 lbs. regularly.

• Self-motivated with the ability to work independently.

• Strong problem-solving skills and willingness to take on leadership responsibilities as the team grows.

Growth Opportunity

This position is designed with a clear path toward advancement. As operations expand, the selected candidate will have the opportunity to step into a Lead Welder role, providing mentorship and guidance to new team members.

#nowhiring

Job Title: Production Specialist
Location: Coon Rapids, MN
Schedule: Monday–Friday, 7:15 AM – 3:45 PM
Pay Range: $20 – $24 per hour, based on experience

Position Overview

We are seeking a dedicated Production Specialist to join our team. This role offers a unique opportunity for individuals who thrive in a hands-on manufacturing environment and are motivated to grow into a skilled technical career. The position combines production support responsibilities with structured training designed to prepare candidates for advancement into a technician role.

Key Responsibilities

Production Support

• Prepare materials for production, including basic assembly, quality control, part cleaning, and maintenance.

• Assist with inventory tasks such as pulling, restocking, and accurately labeling components.

• Support shop operations with organization, documentation, and packaging activities.

Technical Development

• Work alongside senior technicians to learn advanced technical processes.

• Participate in training programs focused on tool usage, blueprint reading, technical troubleshooting, high purity testing, and quality control procedures.

• Gradually assume additional responsibilities as skills and competencies are developed.

Administrative Duties

• Accurately document job information using both digital systems and paper documentation.

Safety & Compliance

• Follow all safety protocols and quality standards to ensure a safe and efficient work environment.

Qualifications

• Ability to follow detailed instructions and work effectively in a team setting.

• Strong communication skills and excellent attention to detail.

• Basic understanding of tools, parts, and technical drawings or blueprints.

• Ability to perform physical tasks, including safely lifting up to 50 lbs.

• Competence in both digital and manual record-keeping.

• Demonstrated interest in technical learning and long-term career advancement in manufacturing.

Career Development

This position is designed as a career launchpad for candidates seeking advancement into technical roles. Individuals who demonstrate strong performance, technical aptitude, and attention to detail will receive on-the-job training, mentorship, and growth opportunities, with the potential to transition into a technician role.

#nowhiring

Toyota Texas is looking for a passionate and highly motivated Toyota Experience Center Ambassador to advance the mission of Toyota’s Experience Center and manufacturing facility by conducting guided tours of the Toyota plant for visitors of all ages.

Utilizing the techniques of dialogue, inquiry and storytelling, the primary responsibility of this role will be to educate visitors about Toyota’s core values, employment opportunities, community initiatives and the company’s vision for the future of mobility.

In this role, Ambassadors will be required to narrate scripted tours and safely drive electric trams in a high-paced manufacturing environment. Candidates must be energetic, enthusiastic, cheerful and willing to learn. Successful employees will have an interest in working with people—especially students—and be willing to become actively involved in the programs of the Experience Center.

· Must be 18 years old with a high school diploma

· Computer experience with emphasis on Microsoft Office Suite

· Excellent communication and customer service skills

· Ability to speak in front of groups of people

· Ability to work with all levels within the organization including executives and VIP guests

Hiring for assemblers

Nice company in Pacific, MO looking for assemblers!

• 1st shift- 7:00am to 3:30pm Monday-Friday
• $16.00/hr and go to $17.00/hr upon hire
• Willing to train
• Drills and taps holes for mounting
• Installs and wires thermostats and other equipment
• Solders connections
• Tests and adjusts electrical components

#nowhiring

• Good attention to detail
• Ability to use hand tools and solder equipment
• Good communication skills 
• Good attendance

#now hiring

Operate and maintain industrial equipment and machinery

Learn how to make and manufacture our wide variety of innovative products

Communicate all pertinent information regarding safety, quality, and mechanical issues to designated leads

Perform product adherence checks to maintain our quality standards

#nowhiring

This position includes the opportunity to enroll in Medical, Dental, Vision, Term Life, and Short Term Disability benefits, as well as a Retirement Plan.  All Illinois talent are also entitled to accrue and use paid time off. Additional benefits information can be found here:

https://www.resourcemfg.com/employees/benefits/

Ability to continuously stand, walk or sit

Ability to lift up to 10 lbs frequently and 50 lbs occasionally

Minimum of 1 year experience in manufacturing 

#nowhiring

Assembler needed. Performs a wide variety of functions including but not limited to assembling, transporting and packing enclosures; adjusting for assembly of engines, components or enclosures; and any other work which must be assembled, tested or handled either inside or outside the immediate assembly area. Properly utilizes all fasteners, components, materials and accessories associated with enclosure package constructed (i.e. knows torque ratings, applications, etc of all accessories). Maintains hand tools required for D-class operations such as impact sockets, plumb bob, slide square, chalk line, breaker bar, weld helmet, vice grips, striker, and a complete set of wrenches and sockets. Makes appropriate use of aforementioned hand tools. Has basic reading ability, understand and work from blueprints, manuals, bills of material and verbal instructions. Safely and efficiently operates Pirranah machine; learns to operate saw machines. Able to perform basic assembly welding on items such as hold-down bars and simple frames. Assist with engine test operations. Request to read complete job description.

#nowhiring

This position included the opportunity to enroll in Medical, Dental, Vision, Term Life and Short Term Disability benefits, as well as a Retirement Plan.  All Illinois talent are also entitled to accrue and use paid time off. Additional benefits information can be found here:

https://www.resourcemfg.com/employees/benefits/

Ability to continuously stand, walk or sit

Ability to lift up to 10 lbs frequently and 50 lbs occasionally

Maximum of 1 year experience in manufacturing

Pipe Fitter / Maintenance needed in Pasadena!

Responsibility and Authority

• Read diagrams and schematic drawings and service manuals to determine work procedures.
• Operate rigging equipment to place heavy machinery and parts.
• Fit bearings, align gears and shafts, attach motors, and connect couplings and belts.
• Align and test equipment and make any necessary adjustments.
• Welding (TIG) and fabrication of pipe systems and pipe supports.
• Pipe fitting experience.
• Industrial production and processing systems as required for construction or maintenance.

Knowledge and Skills

• Must be familiar with mechanical equipment those require to do the job.
• Pipe fitting experience.
• Welding machine operating knowledge.
• Some knowledge of basic electrical diagrams.
• Should be very good in interpreting the P & ID.
• Should be very precise in followings written or verbal order to do the mechanical work.
• Should be able to operate heavy equipment.

Automotive Production Assembly Workers Wanted. Now taking applications for these temp to hire positions with start dates between  10/6 – 10/21 for most applicants. MUST speak English fluently for safety reasons.

Fantastic Job Opportunity. Good Pay & Benefits.

Location: Princeton, IN

Shift and Pay:

• 6:30am – 3:15pm – $18.00/hr
• 7:15pm – 4:00am – $19.00/hr

Job Responsibilities: 

• Follows Standard Work Process. Performs a specific task or a number of predetermined tasks in the assembly process.
• Performs repetitive tasks such as attaching or affixing pre-manufactured components and parts to main product as it moves through the production line.
• Prepares parts for shipment.
• Notifies Team Leader of defective parts, equipment, tools, materials, nonstandard assembly work or other conditions, which hinder the assembly process.
• Ensures that the time, material and waste is minimized.
• Other duties as assigned.

Benefits:

• Competitive pay
• Paid weekly 
• Medical, Dental, Vision Benefits Available
• Expedited Hiring Process

#nowhiring

Job Requirements: 

• Knowledge of basic hand and power tools
• Ability to follow verbal and written instructions
• Safety Focused
• Emphasis on Teamwork
• Overtime: mandatory when scheduled
• MUST speak English fluently due to safety

 We are ready for YOU to Apply Today! 

#nowhiring

Automotive Production Assembly Workers Wanted. Now taking applications for these temp to hire positions with start dates between 10/6  – 10/21 for most applicants. MUST speak English fluently for safety reasons.

Fantastic Job Opportunity. Good Pay & Benefits.

Location: Princeton, IN

Shift and Pay:

• 6:30am – 3:15pm – $18.00/hr
• 7:15pm – 4:00am – $19.00/hr

Job Responsibilities: 

• Follows Standard Work Process. Performs a specific task or a number of predetermined tasks in the assembly process.
• Performs repetitive tasks such as attaching or affixing pre-manufactured components and parts to main product as it moves through the production line.
• Prepares parts for shipment.
• Notifies Team Leader of defective parts, equipment, tools, materials, nonstandard assembly work or other conditions, which hinder the assembly process.
• Ensures that the time, material and waste is minimized.
• Other duties as assigned.

Benefits:

• Competitive pay
• Paid weekly 
• Medical, Dental, Vision Benefits Available
• Expedited Hiring Process

#nowhiring

Job Requirements: 

• Knowledge of basic hand and power tools
• Ability to follow verbal and written instructions
• Safety Focused
• Emphasis on Teamwork
• Overtime: mandatory when scheduled
• MUST speak English fluently due to safety

 We are ready for YOU to Apply Today! 

#nowhiring

Maintenance  Engineer 

Apply Today! ResourceMFG is currently seeking to hire 2 overnight/weekend Stationary Engineers for a data center/office facility near Beltway 8/Bissonnet area. 

Requirements: 

• Responsible for data center and building systems maintenance, testing, repair oversite and inspection overnight and on weekends.
• Respond to emergencies such as power outages, equipment failures, leaks, and other alarms.
• Coordination of contractors for building repair, equipment replacement, testing and remodeling.
• Utilize CMMS system ensure inspections are done accurately and in a timely manner.
• Assist with people and equipment moves and relocations.
• This position will be subject to Lone Worker Safeguards such as use of a Man Down system or movement tracking.
• Able to work effectively in a team environment with minimum supervision.
• Night/weekend shifts
• $28+ DOE 

• Position is overnight & weekend shifts
• Well organized and possess strong work ethic
• Experience in commercial HVAC, electrical, CMMS
• MS Word/Excel
• Building automation and control systems such as Facility Explorer
• Experience with electrical systems, fire alarm systems, access controls, and code compliance
• Spanish, written and spoken a plus
• Lift 40 lbs 

Assembler
Join our team today!

Production Assemblers and Order Picker/Pullers APPLY TODAY!!

Day Shift, Monday-Friday, 6:30 am to 3:30 pm | Pay Rates: $16.08-16.50/hour (Depending on position)

Join one of America’s largest manufacturing employers in a fast-pace shipping role offering competitive pay, great benefits, and room for growth.

Magpul in Cheyenne, a leading accessory production facility, is looking for detail-oriented, hardworking individuals to join our team!

These positions are full time that offer weekly pay and benefits.

Firearm Accessories Production essential duties include but are not limited to:

• Production with manual hand movements, small hand tools, and pneumatic tools
• Gripping, grasping, and twisting with repetitive movements
• Assemble and manufacture Firearm accessories based on schematics and training
• Packaging finished product after assembly

Order Picker/Puller associate essential duties include but are not limited to:

• Pull, pick, and pack finished products for customer orders
• Direct support to shippers pull orders in detail to fill customer orders
• Scanning inventory for orders
• Boxing product
• Loading trucks

#nowhiring

Assemblers Job Requirements:

• Use of pneumatic hand tools
• Lift and carry up to 50 pounds
• Must be a fast learner
• Great attention to detail
• Ability to assemble with speed and accuracy
• Stand and/or sit for 8-10 hours
• Good attendance and punctuality
• A great attitude and flexibility are a must
• Must be 18+ 
• Must have reliable transportation

Order Picker/Puller Job requirements:

• Must be able to be on your feet for 8-10 hours
• Attention to details is a must!
• Able to perform duties with a customer and client focus
• Adequate with basic math skills
• Able to follow instructions
• Able to learn quickly
• Able to pull, pick, and pack finished products for customer orders
• Responsible and self motivated while working individually and within a small team
• Previous warehouse experience is required

Apply Now to join our team!

Blender Mixer/Operator

Now Hiring for a nice Company in the Fenton area

Blender Mixer / Operator  1st 2nd and 3rd shifts 18.00 to 19.50 per hour with OT available and 2.00 added to base pay when working OT. 

Job Summary:  Cuts and dumps raw materials into blending equipment.  Package and palatalize finished product.

Duties:

• Mixing and Blending dry flour and spices
• Stacking and palatalizing bags of flour and mixes
• Accurately Micro Ingredient weighing
• Batch Set-Up
• Quality control
• Heavy lifting
• Great attention to detail and ability to calculate numbers 

#nowhiring

• Mixing and Blending dry flour and spices
• Stacking and palatalizing bags of flour and mixes
• Accurately Micro Ingredient weighing
• Batch Set-Up
• Quality control
• Heavy lifting
• Great attention to detail and ability to calculate numbers 

#nowhiring

?? Join the Team Behind the Machines – Internal Logistics at a Major Vehicle Manufacturer! ??
Location: Buffalo, WV
Shift: Dayshift / Nightshift
Starting Pay: $17.50/hour

Ready to be part of something big? ResourceMFG is hiring for Internal Logistics roles at a leading vehicle manufacturing facility in Buffalo, WV. This is your chance to step into the fast-paced world of automotive production with the essential work that keeps everything moving behind the scenes.

?? What You’ll Do:

• Support the internal flow of materials and parts
• Ensure timely delivery to production areas
• Work as part of a high-energy, team-oriented environment

?? What We Offer:

• Paid Training – No experience? No problem. We’ll train you!
• Health, Vision & Dental Insurance
• 8 Paid Holidays – After six months of employment
• Plant Shutdown Pay After six months of employment – Enjoy two paid plant shutdowns:
  • Third week of July
  • Week of Christmas
    (We pay 4 out of 5 days during each shutdown!)
• PTO – 32 hours of paid time off after just 90 days
• Annual Raises – Grow with us year after year

? Requirements:

• Must pass a clean drug screen
• Reliable and ready to work Day Shift (6:00am-2:45pm) or Night Shift (7:15pm-4:00am)
• Other shifts may become available
• Strong attention to detail and a team-first attitude
• Able to stand for 8 hours
• Able to walk potentially up to 15 miles per shift
• Safety first

Start your career with purpose and pride. Apply today and become part of the team that helps build the vehicles of tomorrow!

1

Electrician 

2nd Shift ( Flexible to work overtime) 

Location: Missouri City 77489 

We are seeking an experienced and highly skilled Electrical Technician. Electrical and Mechanical Maintenance in the RTH and Dry rice packaging plant. Strong experience, Technical knowledge, and communication skills are essential for this role.  

Responsibilities: 

• Inspect electrical components, such as transformers, circuit breakers, and switches, to identify issues and repair or replace as needed.
• Perform routine maintenance to ensure system operate efficiently and safely 
• Install electrical systems, wiring, and equipment according to specifications and electrical codes.
• Diagnose electrical problems using testing devices and repair techniques.
• Interpret electrical diagrams and blueprints to troubleshoot complex issues.
• Address emergency repairs promptly to minimize downtime and ensure safety.
• Recommend upgrades or modifications to improve system performance and efficiency.
• Stay current with advancements in electrical technology and industry practices.

• 2 year Associate degree in Electrical Technology 
• Proven experience as an electrical mechanic or similar role.
• Proficiency in reading electrical schematics and blueprints.
• Knowledge of electrical systems, equipment, and components.
• Strong troubleshooting and problem-solving skills.
• Ability to work independently and in a team environment.
• Attention to detail and commitment to safety.
• Certification or license in electrical work may be required depending on jurisdiction.
• Knowledge of PLC programming will be an added advantage