WELDER POSITION IN WEST CHESTER AREA 

Position Summary: The Welder’s primary responsibility is mig welding of aluminum and steel parts. Each job must be run with safety, accuracy, and timeliness in the welding area. This is a production welding position.

Position Type/Expected Hours of Work This is a full-time position. Hours of work are Monday through Friday, 5 a.m. to 1 p.m., 40 hours per week with overtime as needed. 

Salary

Starting hourly rate will be $18.00.

Principal Duties and Responsibilities:

Migwelding, including the following:

• Create quality welds
• Inspect welds for accuracy
• Prepare product to be welded by grinding, and placing in jig
• Change wire, welding, as needed.
• Change gas tanks, as needed
• Responsible for identifying and moving of all finished products to the proper location for powder coating
• Ensure all equipment is properly set-up and used in a safe manner
• Operate forklift, if required and trained.
• Performs first piece inspections as well as all subsequent inspections
• Monitor equipment and request maintenance when required.
• Perform simple maintenance and repair as required.

Other Duties and Responsibilities:

• Will be required to cross-train as back-up in other areas of the manufacturing plant.
• Required to have proper and accurate entry into the time and attendance system.
• Other job-related duties as may be necessary to carry out the responsibilities of this position.

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

While performing the duties of this job, the employee is regularly required to talk and hear. This position is continually active and requires standing, walking, bending, kneeling, crouching all day. The employee could life up to 50 pounds. 

EXPERIENCE EXPECTATIONS:

Some welding experience is required, candidate does not need to be a certified welder.  Candidate will be trained.

EDUCATION: High school diploma.

steel toe shoes 

Hiring Quality Inspectors in Landisville, PA

Monday to Friday – 7am to 3pm – $22/per hour

Responsibilities:

• Ensure final product meets quality standards
• Perform variety of quality audits on product
• Use of gages and calibers
• Refer to blueprints to perform audit functions
• Inspect finished product for defects and errors

#nowhiring

Hiring Machine Operators in Landisville, PA

All Shifts Available – $20.90 to $23.10/per hour

Responsibilities:

• Assess material needs
• Develop forecast for assigned production area
• Transport materials
• Complete required paperwork to accompany outgoing materials
• Prepare outgoing material
• Unpack and check goods received

#nowhiring

Hiring Packaging Operators in Landisville, PA

All Shifts Available – Up to $20.90/per hour

Responsibilities:

• Assess material needs
• Transport materials
• Complete required paperwork to accompany outgoing materials
• Prepare outgoing material 
• Unpack and check goods received against purchase orders
• Lift up to 50 pounds

#nowhiring

ResourceMFG is looking for an Inventory Specialist in Knoxville, TN! 

Monday-Friday 7AM-4:30PM

$17.56

The Field Inventory Specialist is responsible for accurately maintaining inventory records and managing the flow of materials. This position requires a continuous-improvement mindset, a firm grasp of basic computer programs, and an ability to work both independently and in a team environment

Duties and Responsibilities 

• Maintain accurate inventory
• Perform cycle counts and audits
• Assists in physical inventories
• Receive in material from vendors and transfers
• Issue materials out to subcontractors
• Adhere to safety standards

• Ability to prioritize workflow
• Ability to work independently with little supervision
• Ability to stand and work outdoors for long periods of time
• Working knowledge of computer programs for entering data
• Basic knowledge of Microsoft Excel and Outlook
• Inventory or WMS system
• Comfortable lifting up to 50lbs

Apply today and lets schedule your interview! 

ATTENTION Maintenance Technician II
Now Hiring
Day/Night Shift – Must be flexible

Competitive Pay. Good Benefits. Safe Workplace. Long Term.

Get a solid paycheck, good benefits and work for a company that respects your hard work. Join us as a Maintenance Technician II at a local manufacturing facility where they treat you right. No more job hunting stress –  Let ResourceMFG put your manufacturing skills to work!

Skilled Maintenance Technician II openings available in Moreno Valley, APPLY TODAY!

Salary Range: $25-$32 per hour depending on experience level.

Shift: Will require some flexibility, 1st/2nd 

About the company: Manufacturing company for glass used in residential buildings  

Type of position: Performance to hire – Full time

Company offers great benefits once hired on such as:

• Profit Share up to 52% bonus paid monthly based on company meeting goals (i.e. Our facility has been extremely fortunately and have met the 54% every month for the last 10+ years).
• Medical, Dental & Vision
• Life
• HSA/FSA
• Vacation
• Sick
• 401K
• EAP
• Holiday Pay
• Family Fun Day
• Etc.

Key requirements:

• Five + years of experience in a manufacturing environment.
• Ability to perform repairs and preventive maintenance on glass tempering production equipment.
• Experience with automated equipment.
• Welding and fabricating experience.
• Experience with power tools and hand tools.
• Wiring / electrical; VFD’s and PLC controls; pneumatic experience.
• Perform PM’s on equipment and assist with various projects, including installation of new equipment.
• Troubleshoot various equipment issues and determine course of action quickly.
• Forklift experience. Company will provide on-site certification.

Now Hiring!
Machine Operator
Night Shift

Build Your Future: Solid Pay. Strong Team. Where Your Success Matters.
No need to spend your time searching for “manufacturing jobs hiring near me” because ResourceMFG is NOW HIRING Machine Operators in your area. Benefit from competitive weekly pay, solid benefits, and the chance to level up  your skills. 

Isn’t it time you worked for a company that wants to see you get ahead! FREE skills training for associates who complete 80 hrs. of work. APPLY TODAY!

“They helped me find work right away. And they\’re awesome to work with.” ResourceMFG Associate, Cathie

We Require Our Customers to Offer:

• Safe and clean work environment
• Employee focused workplace
• Safety programs and training

As a ResourceMFG Machine Operator We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan

Job Requirements

• Minimum 3 months relevant Machine Operator experience
• Attention to detail
• Able to use basic hand and power tools
• Basic math
• Mechanical aptitude
• Ability to identify problems
• Able to multi-task
• Ability to read ruler/tape measure

Job Responsibilities

• Follow safety guidelines
• Follow standard work instructions as assigned
• Perform hands-on tasks
• Lift up to 50lbs, stand, bend, and reach
• Maintain clean and organized workspace
• Troubleshoot equipment issues
• Ensure product meets customer specifications
• Meet production standards
• Work in a team environment
• Accurate recordkeeping and quality documentation
• Inspection of product

Working for ResourceMFG

If you’re looking for a job in manufacturing, ResourceMFG specializes in you! We’re part of Employbridge, the nation’s largest industrial staffing company with 30 years in business. Meaning we have hundreds of open jobs with top employers nationwide. A company that treats you like family, we’re committed to providing equal opportunities to all and ensuring you have a healthy and safe work environment, fair pay and the tools to succeed and grow. This includes a personal recruiter assigned to you, FREE online training for associates who complete 80 work hours, on-time pay and other benefits.

ResourceMFG has and opening available at Hershey Chocolate in Robinson IL for a Coordinator

Weekend Nights. Saturday and Sunday from 6pm to 6am. This is 24 hours per week but can include some hours in the week. The pay is $17.00 per hour while performing the job. We also offer Weekly Pay on Friday. 

The Coordinator does the following.

1. Organizing and planning project aspects.
2. Serving as a primary point of contact.
3. Setting deadlines and assigning responsibilities.
4. Monitoring project progress.
5. Preparing project status reports.
6. Being involved in budget planning.
7. Adapting to project demands.
8. Motivating the team.

Easy application and hiring process! 

REQUIREMENTS:

*High School Diploma or GED. 

*Steel toe shoes required.

Electrical Quality Control Technician needed in SW Houston!

                • Confirm all documentation, such as assembly and QC check sheets are complete and accurate. (Signed,

                   dated, current revision)

                • Must stay focused on task while performing inspections.

                • Confirm the quality and workmanship of the product and processes in assigned areas, such as In-process

                   and finished good products are to engineer specifications on drawings.

                • Report detailed and accurate discrepancies on non-conforming products. (NCP)

Schedule: Monday-Friday (Saturday’s and overtime as required) / 6 a.m. – 2:30 p.m.

Pay: $22.00/hr. Paid weekly!

Requirements:

• 1 - 3 years’ experience in Quality Control manufacturing.

• Must be able to read and interpret schematics.

• Must be able to use Digital Multimeters, Tape measure (preferably metric) basic hand tools.

• Must be detailed oriented, able to comprehend mechanical and wiring drawings, detect poor workmanship.

• Standing for extended periods and bending may be required.

Grinder/ Cleaner 

2nd Shift

Steel Fabricator in Houston, TX 77041

Great Company. Competitive Pay. Safe workplace 

Come work for a company that is committed to the safety and well-being of their workers! A company that provides competitive pay, benefits and the opportunity to learn new skills. If you are an Grinder who enjoys working in a fast-paced environment, ProLogistix is looking for you!  We have an immediate opportunity for a Grinder! 

 Job Responsibilities:

• Use grinding machines to shape metal parts, removing excess materials to achieve the desired shape and smoothness 
• Cleaning and prep for grinding
• Measure equipment 
• Utilize micrometers, calipers and other tools 
• Maintain a clean organized work area 

As a ResourceMFG Quality Control We Offer You:

• Unlimited Referral Bonuses
• Weekly Paycheck with direct deposit option
• Medical, Dental, Vision Benefits
• Retirement Plan & Short Term Disability
• FREE ONLINE skills training
• Discounts on cell phone plans, electronics, groceries, gift cards, appliances, events & much more!

Jr. Project Manger / Superintendent

Modular home builder in the Brownsville area is hiring someone to support the the Project Manager and assist with the oversight of Senior Craft.  In this role, you will keep production moving smoothly, contain costs, ensure work is to spec.

• Pay is open on this role, depending on experience and industry knowledge
• 1 – 3 Years experience, internship in a similar environment highly desire
• Possibility of Direct Hire

Client is seeking 1 - 3 years experience and / or Internship in a similar environment

• Managing Construction Projects
• Cost Containment
• Production Schedules
• Budgets
• RFIs

Now Hiring Forklift Operators

Forget the worry—opportunity’s knocking!

Join us at ResourceMFG as a Reach Forklift Driver, and let’s turn your hard work into solid, dependable pay, along with awesome benefits. We’re all about supporting you and creating an environment where you can flourish. Your success is our success. Let’s make it happen.

Job summary:

• Clarksville, TN
• Pay: $17/hr.
• Resume Required
• Shift determined after interview
• Must have 6 months Forklift experience. 
• Must be able to work production as needed
• Basic computer skills, scanning and warehouse operation experience preferred
• Reach Truck experience preferred

As a ResourceMFG Forklift Operator We Offer You:

• Weekly Pay (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

Apply with ResourceMFG, a company where 8 out of 10 associates say it’s a great place to work.

• Knowledge of proper forklift safety skills
• Basic math and reading comprehension skills
• Attention to details
• Experience working in a distribution center or warehouse
• Steel toes required. 
• Up to date resume required.
• Interview with client.

Apply Now!

Electrical and Mechanical Assembler Needed

Job Summary: Position requires assembly of all electrical and mechanical components as needed

Pay: $18 – $25 DOE

Shift: 1st shift 6:00 am – 4:30 pm (10-hour shifts/ Mon-Sat required)

Shift: 2nd shift 4pm – 2:30am (10-hour shifts Mon-Sat) shift differential

Duties:

• Perform manual processes to complete mechanical and electrical assemblies and sub-assemblies, using hand, electric and pneumatic tooling

• Reports defective material or questionable conditions to the department supervisor

• Maintain the work area and equipment in a clean and orderly condition and follows prescribed safety regulations.

• Complete tasks as directed by manufacturing schedule with minimum supervision

• Other duties as directed by supervisor

 As a ResourceMFG Associate We Offer You:

• Competitive pay

• Paid weekly (Direct Deposit or ATM Debit Card Available)

• Access to health benefits and retirement plan

• Free online skill training courses

#nowhiring

Requirements:

• Familiarity with assembly and measuring tools, interpretation of visual aids and ability to perform simple shop math

• Good command of the English language, both written and verbal is required

• Competency in reading and interpreting engineered drawings, schematics or other technical documents

• Able to lift up to 50 lbs.

• Able to stand for 8–10-hour shifts

• Resume required 

House Moving Helper

Manufacturer of modular homes is adding a House Moving Helper to the team to get the units out of the yard and to their home owners!  In this role you will be responsible for assisting getting the units on trailers, strapping them down and using bottle jacks and levels to keep it level.

• Pay is $15
• 1st Shift – Mon thru Fri, 8am to 5pm

And while working with ResourceMFG Employbridge you will experience:

• Weekly Pay
• Access to Direct Deposit
• Medical, Dental, Vision, Retirement Savings and Much More!

1 Year of more:

• Moving Houses or Large Equipment
• Levels and Bottle Jacks
• Shims
• Measuring Skills
• Strapping
• Absolute Attention to Detail and Working Safely

NOW HIRING!! CNC Machinist – 2nd Shift Great Opportunity in Clearwater, FL

About the position:

Operate CNC HAAS Milling machine, CNC Lathe Okuma 10 & Okuma 10 SS and Okuma 12 with OSB 300 L Control (Okuma 10SS and 12 running with sub spindle live tooling). Our machines are 3-Axis, 4- Axis and 5-Axis, working with aluminum, plastic and stainless steel to make simple parts.

Job Duties include, but not limited to:

• Set up and tear down a work order on a CNC Machine.

• Responsible for in process inspection (utilizing calipers, micrometers)

• Responsible for making adjustments to offsets, and program as needed to maintain tolerances.

• Must be able to work off of blueprints

• Must be able to accurately use shop math in checking parts.

• Perform basic maintenance to the machines (clean and maintain, no mechanical repairs – weekly and monthly coolant maintenance)

• Maintain the machine within the scope of its ability.

• You will be expected to help around the shop with deburring, tapping, etc. as needed to keep parts moving

• Maintain all paperwork associated with producing the part and maintaining company records.

Benefits of working with us:

• Health, Vision and Dental Insurance

• Holiday pay
  
• Weekly pay
• Long term job opportunities with stability
• 40 hours plus over-time when needed
  

Required experience & qualifications:

• Machining Technology certification from a technical school, Machinist certification from a CNC manufacturer (such as OKUMA or HAAS) or equivalent.

• A minimum of two-years of hands-on Machining Operating experience.

• Working knowledge of shop math (Algebra, Geometry and Trigonometry).

• Must know how to use calipers and micrometers

We are looking for skilled candidates with excellent attention to detail for the position of forklift operator. Forklift operators are responsible for optimizing loads to ensure operational efficiency, and managing inventory by utilizing RF scanning equipment, among other duties.

Forklift Operator Responsibilities:

• Loading, unloading, shipping, and receiving warehouse items.
• Transporting materials to different locations within the facility.
• Optimizing loads to ensure operational efficiency.
• Securing loads to the machine before transportation.
• Inspecting for damages to vehicles.
• Scheduling vehicles for maintenance and repairs.
• Operating and managing technical equipment.
• Managing inventory by utilizing RF scanning equipment.
• Picking and wrapping orders for shipment.
• Identifying workplace safety hazards.
• Adhering to safety management standards.
• Adhering to production schedules.

Forklift Operator Requirements:

• High school diploma or GED.
• Excellent hand-eye coordination.
• Proficiency in operating technical machinery and RF scanners.
• Good physical condition.
• Mathematical aptitude.
• Good organizational skills.
• Attention to detail.
• Good written and verbal communication.

Logistics Supervisor
?? Conyers GA | ?? Temp to Hire | ?? Supply Chain & Logistics

Are you a natural leader with a passion for logistics and team development? We’re looking for a Logistics Supervisor to oversee day-to-day warehouse operations in a fast-paced, third-party logistics (3PL) environment. This role is perfect for someone who thrives in a dynamic setting, enjoys solving problems, and takes pride in delivering operational excellence.

What You’ll Do:

• Supervise and coordinate logistics activities across shifts to ensure seamless daily operations

• Work closely with the Logistics Manager to plan and improve processes in line with service standards

• Monitor and report on Key Performance Indicators (KPIs) to meet customer and company expectations

• Partner directly with the customer to support a successful and collaborative relationship

• Build and lead a high-performing team—set schedules, conduct check-ins, and celebrate successes

• Champion safety, security, and compliance with all company policies

• Promote a culture of Diversity, Equity & Inclusion by cultivating team spirit and open communication

• Contribute to financial performance by understanding cost drivers and identifying improvement areas

• Support onboarding and training for new hires, helping them integrate and succeed from day one

What We’re Looking For:

• 2+ years of experience in logistics, warehouse, or distribution leadership

• Strong understanding of logistics workflows and warehouse best practices

• Excellent communication and people management skills

• Experience in a 3PL environment is a plus

• Comfortable with data, reporting, and performance metrics

• A proactive, team-first mindset and a commitment to continuous improvement

• Flexibility to work various shifts and support operational needs as required

Why Join Us?

You’ll be joining a leading logistics organization that supports some of the nation’s largest supply chains. We believe in growing talent, recognizing success, and building strong, inclusive teams. If you’re ready to make an impact, we’d love to hear from you.

Apply today and take the next step in your logistics leadership career!

Job Requirements:

• High school diploma or GED required; associate or bachelor’s degree preferred

• 2+ years of supervisory experience in logistics, warehouse, or supply chain operations

• Experience in a high-volume, fast-paced logistics environment (3PL experience a plus)

• Proficient in Microsoft Office (Excel, Outlook) and warehouse management systems (WMS)

• Strong leadership, communication, and organizational skills

• Ability to analyze performance metrics and implement improvements

• Flexibility to work various shifts, including weekends or holidays, as needed

• Knowledge of OSHA regulations and commitment to safety best practices

Forklift Operators all shifts are needed for a warehouse in the Hudson area. 

$200 Unlimited Referral Bonuses

Shifts available: 

• 3rd Shift 11:00pm – 7:00am

Pay range: $19.75

Forklift Operator Job Duties:

• Load, unload, move, stock, and stage products and materials using various types of forklifts or other power equipment 80% of specified shift
• Pull and prepare product for shipment ensuring the exact number and types of product is loaded.
• Verify load accuracy; check the load count, stability, and product damage, report variances as necessary
• Complete other general warehouse tasks as needed

Perks to working with ResourceMFG:

• Referral bonus
• Weekly paycheck
• Direct deposit options
• Online courses through Penn Foster at no expense to you
• 401k and more

#nowhiring

• 6-month prior experience operating either a forklift (sit down or stand up)
• RF scanning experience is required

Apply online today!

#nowhiring

Hiring a Test Supervisor for a great company in Catoosa!  

Pay: $30.00-$37.00 a hour

First Shift: 6:00a.m. to 4:30p.m. Monday-Friday, Flexibility to work overtime and weekends as needed

As a Test Supervisor Associate We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• Free ONLINE skills training

POSITION SUMMARY:

This position operates within the scope of testing equipment and communicating with customers through acceptance testing and field service for oil and gas. The test supervisor will be overseeing the process of operating and testing fracking, coil tubing, and cementing equipment. This role will require the ability to operate and test Oil and Gas equipment as well. This role functions as part of the operations team. This position reports to the Production Manager

ESSENTIAL JOB FUNCTIONS:

This position is responsible for all the following:

• Work every scheduled workday including weekends and overtime as required.
• Always understand and comply with all PPE requirements, work safely every day and encourage all team members to do the same.
• Perform all tasks per established quality and efficiency standards.
• Follow action and communication protocols for nonstandard deviation in processes or materials.
• Review and approve time and attendance in a timely manner.
• Manage and verify for completion of group and individual training.
• Provide disciplinary actions as required.
• Manage and verify build book and test documentation completion.
• Work and plan daily with other department supervisors for an efficient transition of equipment from one department to the other.
• Verify that all procedures that have been implemented are being complete in the time frame required.
• Confirm that all equipment is complete and tested to the test plan.
• Work with Electronics Specialist to keep testing running according to plan.
• Communicate to engineering of any changes need to test document.
• Plan and work to the test plan from Start-Up through Customer Acceptance Test.
• Perform other duties as assigned.

Job Requirements: 

• Commitment to a safety culture where safety is the first consideration before starting any task.
• Commitment to managing a clean and organized workstation to improve efficiency.
• Capable of reading and understanding schematics to troubleshoot issues.
• Capable of identifying roadblocks and inefficiencies.
• Capable of mentoring team members for continuous improvement.
• Proficient in basic material handling techniques.
• Ability to receive both written and verbal assignments.
• Proficient in problem analysis and resolution.
• Effective and willing communicator.
• Strong team player.
• Strong understanding of company policies and procedures.
• Effective at de-escalating and resolving issues among team.
• Proficient at identifying warning signs of potential issued with personnel.

  QUALIFICATIONS:

• Strong mechanical aptitude

• Experience operating oil and gas equipment.

• Creativity, initiative, detail-oriented, results-focused

• Self-motivated and can work with moderate direction and mentoring.

• Personal motivation for success.

• High School Diploma, GED or similar experience.

• Vocational school/training.

  WORK ENVIRONMENT:

  • The performance of this position will require exposure to areas which require the use of personal protective equipment such as safety glasses, hearing protection, steel toe shoes and other mandatory safety equipment.
  • For the most part, ambient temperatures with typical plant lighting and manufacturing equipment are present throughout the facility.

PHYSICAL DEMANDS:

• Sit or Stand as needed
• Standing and walking primarily on a level surface for periodic periods throughout the day
• Reaching, pushing, pulling or lifting as required within limits

OTHER REQUIREMENTS:

• Successful completion of a pre-employment drug screen
• Professionalism, flexibility, critical thought process and creativity
• Ability to learn and work under pressure and meet deadlines.
• Ability to manage multiple tasks and prioritize workflow.
• Regular and reliable attendance
• Regular contact with all levels of personnel throughout the organization
• Travel will be expected as needed.  Able to travel within North America
• Follow all safety policies and procedures.
• Follow appropriate dress code.

Hiring a Electronic Bench Technician Associate for a great company in  West Tulsa!  

Pay: $23.00-$28.00 a hour based on experience

Shift: 4-10’s, 6:00am-4:30pm, Mon-Thurs, with a 30 min lunch….off on Friday-Sunday, although we have been working OT due to in house volume. 7am-11am-Fridays

As a Electronic Bench Technician We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• Free ONLINE skills training

Job Description:

• 3-5 years of experience bench testing required
•  Experience repairing circuit card assemblies down to component level
•  Electronic Theory experience is required
• Electrical and Mechanical experience

Job Requirements:

• On the job experience, vocational schools, military schooling, Naval, etc.)

• Must be able to read and understand written instructions/spec sheet

• Physical hand requirements:

  Include lifting to 40lbs with or without assistance, bend, walk, stoop, for up to 12 hours per day.

• Why work here? 
• Great company culture 
• Full coverage health insurance once hired full time! 
• Life Insurance 
• 401K Matching 
• Dental & Vision at a minimal cost 
• Career Path
• Pay raise based on production

Apply Now!!! Work for ResourceMFG, a company Clearly Rated named us a "best in class" employer!

Working for ResourceMFG If you’re looking for a job in manufacturing, ResourceMFG specializes in you! We are America’s largest staffing company with over 30 years in business, putting more than 24,000 people to work nationwide, each week. A company that treats you like family, we’re committed to providing equal opportunities to all, a healthy and safe work environment, fair pay and the tools to succeed and grow.

Hiring a Shipping and Receiving Manager for a great company in Tulsa!  

Pay: $20.00-$25.00 a hour

Shift: 6:00a.m.-2:30p.m. , OT when necessary

As a Shipping and Receiving Manager Associate We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• Free ONLINE skills training

Job Description:

• Shipping and Receiving.
• Attention to detail.
• Blueprint reading 
• BOL’S
• Logistics
• Computer skills, Excel
• Associate that is detail orientated that makes sure every item gets shipped to the correct place & paperwork is given to the appropriate person.
• May have to orchestrate trucking companies to pick up loads.
• Clean & Prep Stainless Steel Kitchen equipment.
• Load/unload trucks, Floater.
• Team collaboration 

Job Requirements:

• Minimum of 3 years
• Safety
• Attendance is a must
• Time management 
• A valid Driver’s
• Works well with a team

Physical Demands:

• Walking, standing, stooping, crouching.
• Some heavy lifting (up to 75 lbs with a team).
•  Able to work in industrial environment.

• Why work here? 
• Great company culture 
• Full coverage health insurance once hired full time! 
• Life Insurance 
• 401K Matching 
• Dental & Vision at a minimal cost 
• Career Path
• Pay raise based on production

Apply Now!!! Work for ResourceMFG, a company Clearly Rated named us a "best in class" employer!

Working for ResourceMFG If you’re looking for a job in manufacturing, ResourceMFG specializes in you! We are America’s largest staffing company with over 30 years in business, putting more than 24,000 people to work nationwide, each week. A company that treats you like family, we’re committed to providing equal opportunities to all, a healthy and safe work environment, fair pay and the tools to succeed and grow.

Hiring a Break Press Helper Associate for a great company in Tulsa!  

Pay: $16.00-$18.00 a hour 

Shift: 6:00a.m.-2:30p.m. Monday-Friday, Sometimes overtime may be required.

As a Order Fulfillment Associate We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• Free ONLINE skills training

Job Description:

• Assists a press brake operator
• Preparing the machine for operation
• Material handling 
• Tasks such as loading and unloading steel metal, onto and off of the press break
• CNC, Press brake and Manual a plus but not necessary.
• Forming light gage stainless steel parts
• Ensuring the work area is clean and organized
• Ensuring that tools and materials are stored properly
• Following safety procedures and guidelines related to the operation of the press brake and the handling of materials

Job Requirements:

• Minimum of 6 months-1 years of Break Press experience
• Knowledge of Safety Guidelines
• Lift up to 20-50 lbs, sit, stand, bend and reach
• Experience in manufacturing 
• Accuracy, customer oriented, detail and goal oriented
• Mechanical ability
• Organized
• Problem solving
• Reads and analyzes blueprints
• Time management
• Attendance is a must
• Working well with a team 
• Self-Motivated
  

 Why work here? 

• Great company culture 
• Full coverage health insurance once hired full time! 
• Life Insurance 
• 401K Matching 
• Dental & Vision at a minimal cost 
• Career Path
• Pay raise based on production

Apply Now!!! Work for ResourceMFG, a company Clearly Rated named us a "best in class" employer!

Working for ResourceMFG If you’re looking for a job in manufacturing, ResourceMFG specializes in you! We are America’s largest staffing company with over 30 years in business, putting more than 24,000 people to work nationwide, each week. A company that treats you like family, we’re committed to providing equal opportunities to all, a healthy and safe work environment, fair pay and the tools to succeed and grow.

Select Staffing has a great opportunity for 1^st and 2^nd shift Machinist within a manufacturing company in Newbury Park, CA.

Pay: $30

1^st shift: 7AM – 3:30PM

2^nd shift: 3:30PM – 12:30AM

Monday to Friday

Over time and Saturday required.

Job Summary* Run, and inspect parts to drawing specification using CNC Lathe or CNC Mill, and/or CNC mill turn. The Machinist Operator is required to perform first article inspections and correct any discrepancies between part measurements and print requirements. The Machinist Operator must have the ability to troubleshoot and rectify any problems. Should be adept in all aspects of machining and assist other machinists as needed. Job Responsibilities

• Apply knowledge of machine shop theory and procedures, shop mathematics, machinability of materials and layout techniques.
• Able to set up and operate C/N/C Lathe or CNC Mill with 5-10 years’ experience.
• Utilizes tools and measuring instruments including, but not limited to saw, shear, grinder, calipers, micrometer, calculator, and various other hand tools.
• Read blueprints, machine, and inspect completed parts and related documentation.
• Retrieve appropriate tools from tool crib to complete job.
• Refer to reference books or confer with engineers to resolve questions/issues.
• Maintains equipment as necessary.

Perform other job-related duties as assigned.

• Experience / Qualifications*
• Reading, writing and math ability
• Able to read, speak, and understand English
• Preferred years of experience: 5-10 years Physical Requirements:
• Able to lift/carry/pull/push up to 20lbs
• Occasionally (approximately 3 hours per shift) required to go through intervals of walking, sitting, twisting, and bending

Human Resource Assistant

We are seeking a highly organized, detail-oriented HR Assistant for a short-term assignment supporting our Human Resources department. The ideal candidate must be bilingual in English and Spanish and capable of maintaining strict confidentiality in all HR-related matters.

Key Responsibilities:

• Assist with filing paperwork, creating labels/folders, and maintaining organized records

• Serve as the first point of contact for employees at the front desk

• Support payroll by entering correction edits (no full processing required)

• Ensure neatness, organization, and cleanliness in HR workspaces

• Handle sensitive information with discretion and professionalism

Location: Panorama City 
Shift: 1st Shift | 8:00 AM – 5:00 PM | Overtime as needed
 Pay Rate: $21/hour

Requirements:

• Bilingual – English/Spanish (required)

• Prior administrative or HR experience preferred

• Strong attention to detail and organizational skills

• Ability to work with discretion and maintain confidentiality

• Comfortable with basic computer tasks and office tools

Now Hiring for Material Handler (Forklift & Overhead Crane Experience Needed)!

2nd Shift

Shift : Monday – Friday 

Payrate : $20.75

• Required to safely operate hoist cranes; using slings, chains and sheet lifter. Following all safety protocols.
• Stacking material and put it in the proper place.
• Required to safely operate magnet cranes.
• Required to read and understand work orders, drays and load documents.
• Required to load material per customer unloading specifications.
• Able to successfully use the AS400, scanning tags and completing the load document process.
• Completes assigned duties in accordance with safety policies and practices. This regards to individual safety, the safety of other employees, and the safe use of equipment in the workplace.
• Unloads trucks following all protocols. Checking all product against paperwork.
• Verify quantities and quality of the product/packaging
• Loads and unloads production tables.
• Wears approved personal protective equipment such as safety shoes, gloves, safety glasses, etc.
• Performs other duties as assigned by a supervisor, lead person or management.
  • These may be: Sweeping, cleaning, grinding, unloading laser tables, santitizing.

#nowhiring

Requirements :

• Previous Experience with an Overhead Crane & Forklift Operation
• Ability to manage time and resources for the best possible outcome on a daily basis.
• Ability to lift and move up to 50 pounds, as well as lift and move heavier objects with the assistance of cranes, forklifts, or another employee.
• Knowledge of general shop procedures and rules including safety precautions.
• Ability and willingness to cooperate with co-workers and work as part of a production team

#nowhiring

ResourceMFG has a great opportunity for an Administrative Support role within a aerospace manufacturing company in Simi Valley, CA.

Pay: $28.00 – $30.00

Hours: 9/80 Schedule

Morning shift hours

Monday to Friday (every other Friday off)

Some key responsibilities include:

• Provides general administrative and clerical duties to ensure efficient operations
• Supports team by performing tasks primarily within the Contracts’ organization
• Provides general customer service support
• Prepares, reviews and maintains company documentation, logs and systems
• Coordinates and assists with incoming customer queries
• Other duties as assigned

Required Skills/Qualifications:

• 3+ years recent administrative experience, preferably in an Aerospace, Defense or Space environment or similar discipline
• Advanced computer skills using MS Operating Systems including Outlook, Word, Excel and PowerPoint
• Excellent oral and written communication skills
• Ability to maintain strict confidentiality
• Excellent scheduling, typing, documentation, telephone and organizational skills.
• Excellent oral and written communication skills
• Ability to work collaboratively with co-workers
• Ability to work independently with little supervision
• U.S Citizen or Resident Status

Hiring a Forklift Sit-Down Operator for a great company in Pryor, Oklahoma!  

Pay: $20.74 a hour

Will start off on Days 1st shift 7:30a.m.-4:30p.m. 

As a Forklift Operator We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• Free ONLINE skills training

Job Description:

• Minimum of 6 months- 2 years of Forklift experience
• Knowledge of Forklift Safety Guidelines
• Lift up to 20-50 lbs, sit, stand, bend and reach
• Experience in warehouse or distribution center environment
• Basic computer skills

Job Responsibilities:

• Follow safety guidelines
• Follow standard work instructions as assigned
• Perform hands-on tasks
• Troubleshoot equipment issues
• Meet production standards
• Storing, moving and managing materials
• Use of handheld scanners or on-board computers
• Follow warehouse systems and processes
• Following all quality assurance and safety standards
• Potentially load and unload trailers
• Attendance is a must

• Why work here? 
• Great company culture 
• Full coverage health insurance once hired full time! 
• Life Insurance 
• 401K Matching 
• Dental & Vision at a minimal cost 
• Career Path
• Pay raise based on production

Apply Now!!! Work for ResourceMFG, a company Clearly Rated named us a "best in class" employer!

Working for ResourceMFG If you’re looking for a job in manufacturing, ResourceMFG specializes in you! We are America’s largest staffing company with over 30 years in business, putting more than 24,000 people to work nationwide, each week. A company that treats you like family, we’re committed to providing equal opportunities to all, a healthy and safe work environment, fair pay and the tools to succeed and grow.

We have several opportunities available and shift for a great company in West Tulsa!  

• 1 CNC Machinist – 1^stshift (6:00a.m. -2:30p.m.) Pay:$24-$25 a hour
• 1 CNC Machinist – 2^nd shift (2:30p.m.-1:00a.m.) Pay: $24-$25 a hour+$1.50 shift differential above base pay
• 1 Gear Cutting Machinist – 2^nd shift (2:30p.m.-1:00a.m.) Pay: $22-$24 a hour 
• General Machinist – 1^st shift (6:00a.m.-2:30p.m.) Pay: $20-$24 a hour

As a Machinist Associate We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• Free ONLINE skills training

Job Description:

• 1 CNC Machinist-1^st shift (6a -2:30p)1 CNC Machinist – 2^nd shift (2:30p-1a)
• Looking for CNC Mill operators. Specifically, to run 800 Millimeter Daewoo Horizontals. Must have: Some machining experience working with Mills or Lathes + 3 years of experience horizontal mill.
  
• 1 Gear Cutting Machinist – 2^nd shift (2:30p-1a)
•  Looking for 5 years of machining experience working with Shapers and Hobs. Must have: Some machining experience.

• 1 General Machinist – 1^st shift (6a-2:30p)
  
• Looking for 5 years of machining experience working with Shapers and Hobs. Must have: Some machining experience.

Job Requirements:

• Minimum of 5 years of Machining experience 
• High school diploma or equivalent; technical training is a plus.
• Strong attention to detail with a commitment to quality.
• CNC Mill 
• Run 800 Millimeter Daewoo Horizontals
• Working with Mills or Lathes 3+ years of horizontal mill
• 5 years of machining experience working with Shapers and Hobs
• Attendance is a must

• Why work here? 
• Great company culture 
• Full coverage health insurance once hired full time! 
• Life Insurance 
• 401K Matching 
• Dental & Vision at a minimal cost 
• Career Path
• Pay raise based on production

Apply Now!!! Work for ResourceMFG, a company Clearly Rated named us a "best in class" employer!

Working for ResourceMFG If you’re looking for a job in manufacturing, ResourceMFG specializes in you! We are America’s largest staffing company with over 30 years in business, putting more than 24,000 people to work nationwide, each week. A company that treats you like family, we’re committed to providing equal opportunities to all, a healthy and safe work environment, fair pay and the tools to succeed and grow.

Forklift operator has the responsibility for performing daily Cycle counts and maintaining the inbounds and damage/hold area; All while meeting company standards of safety, security and productivity. High School Diploma or equivalent preferred. Previous experience with ForkLifts-narrow aisle , sit down propane trucks, RFscanner and WMS.

Interested in working for a great company that will offer you a career path and great benefits?!

 Prologistix is the answer you are looking for!

At Prologistix we are looking for a Accounts Payable Clerk 

Pay rate up to $23per hour depending on experience

Work Schedule: 8:00am to :30pm, Monday-Friday.

Job Requirements: 

• • • least 1 year of experience in general accounts payable functions within an ERP system, preferably SAP.
  • At least 1 year of proven experience in managing large volumes of data accurately and efficiently.
  • Minimum of 2 years of experience using?Microsoft Excel.
  • Good Work Attitude and Team Player.
• Must be able to read write and understand English.
• Good Work Attitude and Team Player.

Duties include:

• • Review invoices for accuracy, completeness, and compliance with company specifications prior to payment processing. • Verify that all applicable discounts are applied appropriately. • Execute check runs, electronic data interchange (EDI) transactions, wire transfers, credit memos, and billing exception reports (BERs). • Collaborate with suppliers and internal employees to resolve any outstanding unvouchered receipts. • Offer insights to department managers aimed at improving accounting accuracy and operational efficiency. • Assist with data entry and account analysis as required by management. • Support account reconciliation processes as required by management. • Support system testing for SAP process improvement.? • Manage inbound and outbound cash management activities. • Create and maintain process documentation to ensure compliance among team members. • Interact with other departments, internal and external, to resolve conflicts effectively. • Take initiative and ownership to support internal and external projects. • Perform other duties as assigned by management. • Abide by all company safety and hygiene regulations • Continuous involvement and support with departmental process improvements

Are you looking to make some money on the side?! Refer a Friend and earn a 100 bonus!!

Benefits: 

1. Full Medical Insurance.
2. Dental and Vision Insurance.
3. Full time work.
4. 5 Sick Days
5. $100 Referral bonus