Picking/Packing, physically able to reach, stand for long periods of time, and maintain a steady pace for the entire shift

The Assembler is responsible for assembling precision medical products according to assembly instructions, manufacturing processes, and quality procedures. Key to this role is meeting production demands and ensuring adherence to quality standards.

Responsibilities will include:

1. Build precision sub-assemblies and components using tools and automated equipment in accordance with standard operating procedures.

2. Read visual and written instructions to retrieve parts for use on the production line.

3. Report problems with processes, equipment, or materials to the Lead Assembler.

4. Operate and maintain equipment and machinery used in manufacturing processes.

5. Ensure that work areas are neat, organized, and clean.

6. Complete and maintain accurate documentation, including manufacturing logs, production worksheets, and quality records. 7. Other duties, as assigned.

Hands on experience in a similar work environment. Strong mechanical aptitude, good manual dexterity, must be able to lift up to 50lbs.

Warehouse Looking For Sequencers

Location: Lafayette, IN

Job Description:  Pulling orders and packing using a computer system and scanner.

Pay: $16.50-17.50 an hour

Shifts: All Shifts Available

Tasks to Perform:

• Pull and pack parts
• Scanning parts into the system and creating labels
• Loading and unloading trucks

Job Requirements:

• Attention to detail 
• Steel toed boots
• Computer knowledge

Benefits:  

• Medical Plans Available
• Referral Bonus
• FREE online college courses

Apply Today!

ResourceMFG has a Production Trainer opening in Shelbyville, TN.

Shift:
7-3:00 pm
Pay: $20 hr.

Duties:

• Create and maintain standardized training materials, SOPs, and visual work instructions for each decoration method.
• Conduct skill assessments for new hires and cross-training programs for existing operators.
• Certify operators on defined skill levels (Beginner, Intermediate, Expert).
• Partner with the Production and Engineering teams to identify skill gaps, training priorities, and process improvement opportunities.
• Monitor operator performance post-training to ensure learning retention and consistency of output.
• Ensure all training aligns with quality, safety, and production standards.
• Reinforce adherence to SOPs, 5S practices, and visual management guidelines.
• Maintain a full training matrix for all decoration staff.
• Report monthly training progress, certification rates, and training hours to management.

Requirements:

• Ability to adhere to regulations and standards.
• Outstanding communication and interpersonal skills.
• Excellent organizational and problem-solving ability.
• Respect to diversity.
• Ability to inspire and motivate.
• Strong leadership qualities and interpersonal skills.
• Proven experience in a manufacturing or production environment, preferably within decoration technologies.

Large Manufacturing Company is looking for a Production Line Mechanic.

Pay: DOE

Position Description

Install, maintain, and troubleshoot various production equipment including but not limited to Un-scrambler, Pacific Rotary Filler, inline Fillers, Norden Tube fillers, Resina-Cappers, Label Machines, inkjet Coders, Conveyors, Pumps with a sound knowledge of mechanical, pneumatic systems, hydraulic systems, electric and automation systems.

Essential Functions

Install, maintain, trouble-shoot, repair and rebuild un-scramblers, Fillers, Cappers, Crimpers, Label M/c, Inkjet Coders, Conveyors, and other packaging machines.

Perform line changeovers and set-ups based on production schedule and updates and validate set-up sheets.

Build transfer lines, connect pumps, and perform washout and sanitization of filling system by following company’s standard operating procedures.

Perform preventive maintenance and scheduled maintenance as per MP2 work orders. Reads, interprets the equipment manual, P& I diagram for major repairs and trouble shoots and order parts to maintain the inventory of critical spares.

Requirements:

5 years' experience working on liquid fill production lines in a fast-paced manufacturing environment.

Experience in alcohol filling is a plus.

Be familiar with Resina Cappers & labelers, rotary & in-line fillers, Hot Air Norden Tuber Fillers, Design A-Seal and Videojet Coders a plus.

#NOWHIRING

Forklift Operator in Lafayette, IN

Shift: All Shifts Available

Pay:$17.00-18.00

Position Overview: We are seeking experienced Forklift Operators to join our team. The ideal candidate will have at least 3 years of forklift operating experience and a strong attention to detail.

Key Responsibilities:

• Safely operate forklifts to move materials within the warehouse
• Pull and pack parts accurately and efficiently
• Load and unload trucks with precision
• Maintain a clean and organized work area
• Adhere to all safety protocols and procedures

Requirements:

• Minimum of 3 year of forklift operating experience
• Strong attention to detail and organizational skills
• Steel-toed boots required
• Basic computer skills

Benefits:

• Competitive pay at $17 per hour
• Comprehensive medical plans available
• Attractive referral bonus program
• Access to FREE online college courses

#nowhiring

Immediate openings on all shifts for Paint Booth Operator in Fowlerville!

Day, Afternoon, and Evening Shift

$18.00 per hour to start

Resource MFG is hiring for paint booth operators in Fowlerville!

Full time, temp to hire opportunity

Paint Booth Operator Duties:

• Load parts to conveyor belt
• Quality check parts once painted
• Wrap parts for shipping
• Other duties as assigned

Why Resource MFG?

• Weekly pay
• Free online courses
• Referral Program

Resource MFG is looking for an experienced Machine Operators in Chelsea!

All Shifts

$16.75 – 17.75 per hour based on shift

Resource MFG is looking for an experienced Press Operator for our client in Chelsea! 

Press Operator Duties Include:

• Loading/unloading parts in machines
• Quality checking completed parts
• Other duties as assigned

Why Resource MFG?

• Weekly pay
• Direct deposit available 
• Free online courses

Production Associate – 1st, 2nd & 3rd Shifts Available

Now Hiring Production Associates!

Are you looking for a stable manufacturing career with multiple shifts available? We're seeking dependable, safety-minded Production Associates to join our team. If you enjoy hands-on work, take pride in producing quality products, and thrive in a fast-paced environment, we'd love to hear from you!

Available Shifts: $18.00/hr all shifts

• 1st Shift
• 2nd Shift
• 3rd Shift

Job Responsibilities

As a Production Associate, you will:

• Assemble products and operate manufacturing equipment safely and efficiently.
• Measure, assemble, and transport materials while following production specifications.
• Apply chemicals and materials according to established procedures.
• Verify raw materials, solutions, and finished products meet quality standards before use or release.
• Inspect products throughout the manufacturing process to ensure quality and accuracy.
• Handle raw materials and finished products with care to prevent damage.
• Record production data accurately and maintain required documentation.
• Monitor production processes and make appropriate decisions based on quality and process data.
• Communicate equipment, quality, or production concerns to supervisors promptly.
• Maintain a clean, organized, and safe work environment.

ResourceMFG is immediately hiring for Production Associates in Streetsboro, Ohio!

Shift: 1st: 7am-3:30pm MON-FRI

Pay Range: $16-17/hr based on experience.

Job Details:

• Machine operation in production setting
• Assemble products according to established work instructions
• Package and prepare products

Why work for ResourceMFG?

• Weekly pay!
• Long-term, career-minded opportunities
• Medical, Dental and Vision benefits available
• Free online courses through Penn Foster
• 401k

Employment is contingent upon successful completion of a drug screen and background check

ResourceMFG is immediately hiring an Administrative Assistant for a manufacturing company located in Mentor, Ohio.

Pay: $25.00 per hour

Available Shift:

1st Shift: 8:15am-4:15pm, Monday thru Friday

Job Duties:

• Receiving and responding to inbound calls appropriately.
• Welcome visitors, manage sign-in, and direct visitors as needed.
• Receive, open, sort and distribute incoming mail, prepare outgoing mail for posting; and manage faxes received through Outlook.
• Perform accounts payable functions, including processing vendor invoices, verifying details, attaching required documentation, assigning general ledger coding, entering information into accounting software, and maintaining related files.
• Other tasks assigned

ResourceMFG Benefits:

• Weekly Pay
• Paid training
• Medical, Dental, Vision and 401K available
• Free online career courses
• Unlimited Referral Bonuses
• Cellphone discounts & more

The primary duty of the Coordinator, Warehousing Client Services is to communicate directly with customers and carriers to coordinate incoming deliveries and outgoing shipments.

To perform this job successfully, an individual must satisfactorily perform each essential duty. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential duties.

• Engage in solutions-based communication with clients.
• Interface directly with the warehouse team to ensure accurate and timely processing of orders and receipts.
• Process transactions in the Warehouse management system to complete receipts/ shipments/ inventory transfers.
• Perform cycle counts in the warehouse and investigate any inventory discrepancies.
• Adhere to Warehousing best practices and standard operating procedures
• Drive continuous improvement within the organization through collaboration with site managers.
• Proficient in the warehouse management system WMS.
• Identify trends, key issues, and successes through data analysis and customer feedback.
• Recognize opportunities for enhancing and expanding EFW client relationships.
• Respond to client inquiries quickly and efficiently.
• Provide prompt and professional customer service to new leads and prospects.
• Proactively engage customers to build rapport and ask for new opportunities.
• Follow up opportunities to receive feedback and continuously improve the process.

Automotive Production Assembly Workers Wanted. Now taking applications for these temp to hire positions with start dates beginning 1/13/2026 for applicants. MUST speak English fluently for safety reasons.

Fantastic Job Opportunity. Good Pay & Benefits.

Location: Princeton, IN

Shift and Pay:

• 6:30am – 3:15pm – $18.00/hr
• 7:15pm – 4:00am – $19.00/hr

Job Responsibilities: 

• Follows Standard Work Process. Performs a specific task or a number of predetermined tasks in the assembly process.
• Performs repetitive tasks such as attaching or affixing pre-manufactured components and parts to main product as it moves through the production line.
• Prepares parts for shipment.
• Notifies Team Leader of defective parts, equipment, tools, materials, nonstandard assembly work or other conditions, which hinder the assembly process.
• Ensures that the time, material and waste is minimized.
• Other duties as assigned.

Benefits:

• Competitive pay
• Paid weekly 
• Medical, Dental, Vision Benefits Available
• Expedited Hiring Process

#nowhiring

Employbridge is hiring for Hardware Pre-Installers!

We are seeking a reliable and detail-oriented Hardware Pre-Installer to support our installation team by preparing and staging equipment for deployment. This role is ideal for someone who enjoys hands-on work, staying organized, and working in a fast-paced technical environment.

Key Responsibilities

• Prepare and stage hardware for installation and deployment
• Perform basic hardware setup, configuration, and functionality testing
• Inspect equipment for damage or defects prior to installation
• Label, organize, and manage hardware components and cabling
• Follow installation diagrams, technical instructions, and safety procedures
• Troubleshoot basic hardware and connectivity issues
• Maintain a clean, organized, and safe work environment

Qualifications

• High school diploma or GED preferred
• Basic knowledge of hand and power tools
• Ability to safely use tools and equipment
• Strong attention to detail and organizational skills
• Ability to lift and move equipment (typically up to 25 lbs)
• Comfortable working in dusty or warehouse-type environments
• Previous installation or technician experience is a plus

Skills

• Hardware assembly and setup
• Time management and efficiency
• Problem-solving and troubleshooting

Why Join Us?

• Competitive hourly pay ($17–$20)
• Consistent weekday schedule with early finish on Fridays
• Opportunity to gain hands-on technical experience
• Supportive team environment

NDT Level II – QC Inspector

Job Summary:

Position requires performing visual inspection of welded parts and assemblies in accordance with the applicable design requirements

Duties:

• Visual inspection of welded parts and assemblies in accordance with the applicable design requirements.
• Interpretation of drawings, procedures, instructions, and specifications for determining the acceptance of the product undergoing examination.
• Perform dimensional inspection on piece parts and assemblies in accordance with applicable design documents within the manufacturing facility, at supplies, or at the customer site.
• Monitor and records results of component testing (hydrostatic testing, coating, etc.), witness, or process audits in accordance with documented procedures.
• Prepares non-conformance reports, where applicable, and completes all other documentation requirements.
• Ensure documentation of inspection and testing is performed.
• Assist in the training of other personnel as required by management or as required by the specific task being performed.

Requirements:

• Minimum 2+ year experience working within a manufacturing environment/facility.
• Will be expected to stand for 8–10-hour shifts.
• Resume required.

Pay: $26-34 depends on experience.

Shift: 1st shift Monday-Friday 6:00am to 4:30pm. 10 hour shifts. Saturdays when required.

#nowhiring

Instrument FitterPay rate: $24-$30 DOEShift: 1st (6am-4:30pm)Duties:*Run pneumatic tubing*Complete the layout of tubing on skids*Run tubing to the end devices*Bend tubing 1/4 – 1/2 inch thick*Read General adjustment and P&ID Drawings*Fabricate bracket braces and instrument racks as needed*Reading blueprints*Familiar with different types of tubing*Knowledge of end devices*Understanding of system flow*Performs required testing of tubing*Bending stainless steel Minimum 4 yrs experience Instrument Fitter

Inventory Control Specialist

Job Duties:

• Perform routine cycle counting of inventory.
• Develops, executes, and oversees annual, monthly, and weekly cycle  count planning for all inventory locations/warehouses.
• Assists in the planning and execution of annual physical inventory.
• Entry of transactional data into ERP system in an accurate and  timely fashion.
• Ensuring warehouse inventory balances are maintained at the  highest-level accuracy possible.
• Performs floor to book and book to floor counting of inventory.
• Compares and analyzes inventory balance discrepancies.
• Determines root cause analysis for inventory discrepancies.
• Prepares, maintains and distributes inventory metrics dashboard to  organization,
• Provides recommendations for process changes and technology changes  to improve inventory accuracy.
• Open bales, crates, and other containers.
• Assist in counting of  inventory.
• Weighing and counting items for distribution within plant to ensure conformance to company standards.
• Recording amounts of materials or items received or distributed via appropriates computer program.

Resume required

1st shift – 6am-4:30pm  

Pay – $21 – $27 depends on experience

#nowhiring

Machine Operators and Saw Operators

The machine operator is responsible for operating equipment such as bandsaws, lathes, milling machines, and grinders within the Piping & Structural Fabrication Departments.

Duties:

• Operate machinery such as saws, lathes, milling machines and grinders.
• Operate overhead cranes. 
• Maintain raw material inventories.
• Ability to read blueprints and follow product specification instructions.

Requirements:

• Minimum 2 years fabrication experience
• Able to lift up to 50 lbs
• Able to stand for 8-10 hour shifts
• Resume required

Pay: $20 -$25 depends on experience. 2nd shift differential pay.

Shift: 2nd shift – 5:30 pm – 3:30 am

Shift: 1st shift – 6:00am – 5:30pm

#nowhiring

Industrial Painter and Blaster

Our client who delivers packaged modular systems engineered and manufactured in one of our Houston facilities, which are utilized in data centers, power and commercial/industrial utility system applications.

Job Skills:

• Surface preparations & protective coatings applications on above ground piping; steel structures.
• Operate/maintain various blasting, spraying & other equipment.
• Ability to read read/interpret documents written in English.
• Application of paints & specialty coatings (epoxies, urethanes & zincs).
• Ability to utilize scaffolding, rigging, access, containment systems, & safety equipment.
• Experience with industrial coatings, application process, 2-part mixing process, HVLP equipment, consistent millage.

Minimum Requirements:

2-5 years of experience on industrial painting

Day shift and Night shifts available

1st shift – 6am – 5:30pm

2nd shift – 4:30pm – 2:30am. 2nd shift pay differential.

$22 – $25 depend on experience

Resume required

#nowhiring

Structural Welder

Structural Welders for our Centrally located client manufacturer of complex engineered skids.

• Structural welding in a shop environment.
• Ability to read blueprints, schematics Proficient with welding processes.
• Exceptional math and measurement skills.
• Qualified candidates must pass weld test 3G & 4G. MIG/Flux-core weld processes.
• Structural welding and fitting experience 3-5 years.
• Fit, cut and tack material.
• Prepare welding joints.
• Conventional and measuring instruments.
• Finish grinding applications using manual/power tools.
• Resume required.

1st shifts 6am to 6:30pm; Mon to Sat

2nd shifts 5:30pm to 4:00am; Mon to Sat. 2nd shift pay differential

Pay range: $25-$30 depends on experience

#nowhiring

Pipe Welder

Job Summary:

Pipe welder proficient in welding techniques

Duties: 

• Proficient in assigned welding techniques.
• Interpretation of mechanical drawings, including the ability to read weld symbols.
• Knowledge of wire and filler materials applications for various steel alloys, aluminum, and some exotic materials.
• Working knowledge of fixturing and weld set up parameters (amps, volts, etc.).
• Convention and precision measuring instruments.
• Process inspection, certification, and documentation. 
• Welding equipment maintenance and inspection.
• Finish grinding applications using manual and power tools.
• Safety and housekeeping.
• Other duties as assigned by supervisor.

Requirements: 

• Minimum 3+ year experience working within a manufacturing environment/facility 
• Able to lift up to 50 lbs.
• Able to stand for 8–10-hour shifts

Pay: $25-$32 depends on experience

Shift: 2nd shift – 6:00 pm – 5:30am, (flexible to 10-hour shifts/Saturdays required)

#nowhiring

Mechanical and Electrical Assemblers

Mechanical Assembler

• Perform manual processes to complete mechanical and sub-assemblies, using hand tools, and electronic and pneumatic tooling.
• Familiar with assembly and measuring tools, interpret visual aids and must be able to perform simple shop math.

Requirements: 

• Minimum one year working within a manufacturing environment. 
• Ability to read and interpret P&ID, ISO, and engineering assembly drawings
• Ability to read fabrications drawings is a plus
• May work at different workstations as production needs require or shift from one station to another during the assembly process.

Pay: $17 – $24; depends on experience

Shift: 1st shift 6:00 am – 5:30 pm. 10 to 12 hour shifts and Saturdays required.

Electrical Assembler

• Perform manual processes to complete mechanical and electrical assemblies and sub-assemblies, using hand, electric and pneumatic tooling
• Complete tasks as directed by manufacturing schedule with minimum supervision

Requirements:

• Familiarity with assembly and measuring tools, interpretation of visual aids and ability to perform simple shop math.
• Competency in reading and interpreting engineered drawings, schematics or other technical documents.

Pay: $21 – $27 depend on experience

Shift: 1st shift 6:00 am – 5:30 pm. 10 to 12 hour shifts and Saturdays required.

Have the ability to lift up to 50 lbs.

Expected to stand for 8–10 hour shifts

Facility is a non-climate-controlled environment

#nowhiring

Pipe Fitters

Pipe Fitters for day or night positions

Job Summary:

Pipe Fitter lay out, assemble, install and maintain pipe systems, pipe supports, and related hydraulic and pneumatic equipment.

Duties:

• Interpretation of mechanical drawings, including the ability to read weld symbols
• Knowledge of wire and filler materials applications for various steel alloys, aluminum, and some exotic materials
• Working knowledge of fixturing and weld set up parameters (amps, volts, etc.)
• Convention and precision measuring instruments
• Process inspection, certification, and documentation
• Welding equipment maintenance and inspection
• Finish grinding applications using manual and power tools
• Safety and housekeeping
• Other duties as assigned by supervisor

Requirements:

• Minimum 3+ year experience working within a manufacturing environment/facility
• Be prepared to stand for 8–10-12 hour shifts
• Resume required

Pay: $25-$33 depends on experience. 2nd shift differential.

Shift: 1st shift – 6am – 6:00pm (flexible to work 10/12 hours)

Shift: 2nd shift – 4:30 pm – 3:30 am (flexible to 10-hour shifts/Saturdays required)

#nowhiring

ResourceMFG is hiring Machine Operators in the Ogden area

Shifts:

Day shift: 5am-1:30pm Monday-Friday

Night shift: 9pm-5:30am Sunday-Thursday

Job Duties:

• Operating encapsulation machines
• Preparing and maintaining daily records.
• Labels ingredients and complete all paperwork
• Follow all SOP’s and cGMP requirements

Operator Duties:

• Work in a fast pace environment, monitoring and running machinery to ensure it functions properly
• Nutraceutical manufacturing environment 
• Conduct quality checks periodically.

#nowhiring

• Machine operator experience
• Good attendance
• Reliable transportation
• Able to lift up to 50 pounds
• Able to read & write english
• Comfortable working in a dusty environment

Employbridge Is in search of Standup Reach/ Sitdown/ And Cherry Picker Forklift Operators!

• Schedule 7am – 3:30 pm
• 8am – 5:00pm
• 3:30pm-11:00pm
• Pay: $18-19 Per hour

Position Overview

General Description:

The QA Document Control Specialist is responsible for the maintenance of the Quality Assurance records and documentation.

Specific Responsibilities & Duties:

·        Promotes a safe working environment and adheres to Health, Safety and Environmental procedures, company safety rules, Current Good Manufacturing Practices (cGMP’s), and Standard Operating Procedures (SOP’s) at all times.

·        Verifies that each record is accurate and complete, in compliance with GMP practices.

·        Assembles Production Records by batch.

·        Ensures documentation is review and meets all required testing prior of releasing product in QAD.

·        Prepares Documentation for (B, M, E) samples prior to send to customer for review and approval.

·        Prepares and review Certificate of Analysis.

·        Reviews OTC production reconciliation.

·        Prepares and review Certificate of Manufacture.

·        Prepares labels for customer samples. 

·        Assists other departments when needed.

·        Tracks and reports FG OTC annual product review.

·        Replies/follows up with e-mails and/or customer requests.

·        Monitors releases in QC status for more than 5 days and provide feedback on status.

·        Reviews documentation and releases to ensure completeness and proper GDP documentation.

·        Gathers and collect information as needed from other departments.

·        Performs additional duties as instructed by QA Assurance Supervisor.

Manufacturing

Lead and supervise up to 30+ production staff within a cosmetic manufacturing environment.

•            Will be overlooking 2-5 production lines at a time

•            As a line lead would overlook fulltime and temporary employees.

•            Ensuring daily job production orders are completed to company and clients’ standards.

•            Ensure that production line have the necessary equipment pre-production.

•            Know what each product requires to be properly assembled and packaged.

•            Ensure production areas are maintain clear and clean to ensure safe work environment.

•            Ensure that all SOP’s and GMP’s are followed by everyone in the production floor.

•            Interact with Production Management and QA department to ensure production quality and

schedules are on track.

Call line mechanics when production machinery breaks down or need them to look at a possible issue.

•            Ensure that the first pass quality levels meet or exceed departmental goals.

•            Assist Area Managers in training all employees on quality requirements.

•            Redirect support staff as necessary.

•            Bilingual in English and Spanish a plus.

Requirements

•            1-2 years of Production Line lead experience (Cosmetic Industry or Personal Care a plus)

•            HS Diploma or GED

•            Able to read, write and communicate in English

#NOWHIRING

Manufacturing

Large Manufacturing Company in Chatsworth is looking for Maintenance Helpers.

2nd Shift Hours: 2:30pm – 11:00pm

1st Shift Hours: 6:00am – 2:30pm

Temp to Hire

Full Time hours.

·        Responsible for the efficient and safe setup and changeover of production lines for cosmetic manufacturing. This included connecting and disconnecting equipment, ensuring proper alignment and functionality, and troubleshooting any mechanical issues that arise during the setup process.

·        Set up production lines according to work orders and specifications, including connecting machinery, plumbing, and other necessary components.

·        Performed equipment changeovers, ensuring timely and accurate transitions between product runs.

·        Inspected equipment for damage or wear and perform basic maintenance as needed.

·        Troubleshooted mechanical issues during setup and make necessary adjustments to ensure proper operation.

·        Collaborated with production and maintenance teams to optimize line efficiency.

·        Adhered to all safety protocols and quality standards.

• Responded to production calls for pump issues and leaks, troubleshooting problems.
• Worked with diaphragm, Waukesha, and drum pumps.
• Maintained a clean production floor to ensure safety and prevent accidents.
• Operated various forklifts and pallet jacks.

Manufacturing

Pay: $19.00 per hour

Temp to Hire (Full Time)

Mail Clerk Responsibilities

• Sort, organize, and distribute incoming mail to the appropriate departments and recipients.
• Process and log incoming and outgoing mail, including date and time stamping when required.
• Prepare outgoing shipments by weighing packages, calculating postage, and coordinating deliveries through USPS, FedEx, UPS, and other carriers.
• Operate mailroom equipment, including scanners, fax machines, postage meters, and automated mail-processing systems.
• Ensure the security and confidentiality of sensitive mail and inspect packages for prohibited items when applicable.
• Provide mailroom customer service support, including answering employee inquiries and assisting with shipping and mailing requests.
• Assist with bulk mail projects, quality control processes, recordkeeping, and other administrative tasks as needed.
• Maintain an organized, efficient, and compliant mailroom environment while meeting daily service deadlines.

Mail Clerk