Material Receiving Inspector

• Responsible for managing daily quality control inspections of incoming materials that meet company standards.
• Including supplier document compliance, visual inspections, dimensional checks, assembly verification, and supplier inspections.

Key Job Responsibilities:

• Conduct visual inspections, measurements, and test on raw materials, major equipment.
• Mark items for acceptance or rejections, record test results.
• Coordinate with suppliers, carriers, and internal departments.

Minimum Requirements:

• ASNT SNT-TC-1A qualified Level I in Visual Inspection (NDE).
• Experience with dimensional inspection equipment such as tape measures and familiarity with warehouse operations.
• Strong warehouse skills, including inventory management, storage procedures, and material handling.

Schedule shift is 1st; 6am – 4:30pm Monday to Friday. Saturdays if required.

Pay range is from $25 to $28 an hour. Based on experience.

Consideration based on resume presented. 

#nowhiring

NDT Level II – QC Inspector

Job Summary:

Position requires performing visual inspection of welded parts and assemblies in accordance with the applicable design requirements

Duties:

• Visual inspection of welded parts and assemblies in accordance with the applicable design requirements.
• Interpretation of drawings, procedures, instructions, and specifications for determining the acceptance of the product undergoing examination.
• Perform dimensional inspection on piece parts and assemblies in accordance with applicable design documents within the manufacturing facility, at supplies, or at the customer site.
• Monitor and records results of component testing (hydrostatic testing, coating, etc.), witness, or process audits in accordance with documented procedures.
• Prepares non-conformance reports, where applicable, and completes all other documentation requirements.
• Ensure documentation of inspection and testing is performed.
• Assist in the training of other personnel as required by management or as required by the specific task being performed.

Requirements:

• Minimum 2+ year experience working within a manufacturing environment/facility.
• Will be expected to stand for 8–10-hour shifts.
• Resume required.

Pay: $25-30 depends on experience.

Shift: 1st shift Monday-Friday 6:00am to 4:30pm. 10 hour shifts. Saturdays when required.

#nowhiring

Steel toed footwear

Inventory Control Specialist

Job Duties:

• Perform routine cycle counting of inventory.
• Develops, executes, and oversees annual, monthly, and weekly cycle  count planning for all inventory locations/warehouses.
• Assists in the planning and execution of annual physical inventory.
• Entry of transactional data into ERP system in an accurate and  timely fashion.
• Ensuring warehouse inventory balances are maintained at the  highest-level accuracy possible.
• Performs floor to book and book to floor counting of inventory.
• Compares and analyzes inventory balance discrepancies.
• Determines root cause analysis for inventory discrepancies.
• Prepares, maintains and distributes inventory metrics dashboard to  organization,
• Provides recommendations for process changes and technology changes  to improve inventory accuracy.
• Open bales, crates, and other containers.
• Assist in counting of  inventory.
• Weighing and counting items for distribution within plant to ensure conformance to company standards.
• Recording amounts of materials or items received or distributed via appropriates computer program.

Resume required

1st shift – 6am-4:30pm  

Pay – $19 – $25 depends on experience

#nowhiring

Steel toed footwear

General Warehouse and Materials Handling Experience preferred.Previous experience driving a forklift is positive, but not a requirement.Ability to read and interpret an order page or bill of materials.Main shipping and receiving warehouse are NOT climate-controlled and may be exposed to the elements while loading/unloading a shipment.Ability to lift 65 lbs.Basic knowledge of hand tool use.Takes direction well and shows good initiative/self-motivated.Will be working in a warehouse team, so they need to thrive in that environment.Initial tasks will include building/populating traffic signal heads with LED modules and warehouse organization. Will spend most of their day standing. 

Machine Operators and Saw Operators

The machine operator is responsible for operating equipment such as bandsaws, lathes, milling machines, and grinders within the Piping & Structural Fabrication Departments.

Duties:

• Operate machinery such as saws, lathes, milling machines and grinders.
• Operate overhead cranes. 
• Maintain raw material inventories.
• Ability to read blueprints and follow product specification instructions.

Requirements:

• Minimum 2 years fabrication experience
• Able to lift up to 50 lbs
• Able to stand for 8-10 hour shifts
• Resume required

Pay: $18-$22 depends on experience. 2nd shift differential pay.

Shift: 2nd shift – 5:30 pm – 3:30 am

Shift: 1st shift – 6:00am – 5:30pm

#nowhiring

Steel toed footwear

Now Hiring: Glass Production Team Members – Plymouth, MI

Join a growing company and build a career in glass manufacturing.

What We Offer:

• $16–$17/hr starting pay
• Stable, full-time work
• Supportive team environment

Available Shifts:

• Days: 6:30 AM – 3:00 PM
• Afternoons: 2:55 PM – 11:25 PM

What You’ll Do:

• Assist in glass production and finishing
• Perform quality checks
• Keep equipment and work areas clean
• Work safely and follow procedures

Who We’re Looking For:

• Dependable workers with a positive attitude

6 months previous experience

Industrial Painter and Blaster

Our client who delivers packaged modular systems engineered and manufactured in one of our Houston facilities, which are utilized in data centers, power and commercial/industrial utility system applications.

Job Skills:

• Surface preparations & protective coatings applications on above ground piping; steel structures.
• Operate/maintain various blasting, spraying & other equipment.
• Ability to read read/interpret documents written in English.
• Application of paints & specialty coatings (epoxies, urethanes & zincs).
• Ability to utilize scaffolding, rigging, access, containment systems, & safety equipment.
• Experience with industrial coatings, application process, 2-part mixing process, HVLP equipment, consistent millage.

Minimum Requirements:

2-5 years of experience on industrial painting

Day shift and Night shifts available

1st shift – 6am – 5:30pm

2nd shift – 4:30pm – 2:30am. 2nd shift pay differential.

$20 – $24 depend on experience

Resume required

#nowhiring

Steel toed footwear

Structural Welder

Structural Welders for our Centrally located client manufacturer of complex engineered skids.

• Structural welding in a shop environment.
• Ability to read blueprints, schematics Proficient with welding processes.
• Exceptional math and measurement skills.
• Qualified candidates must pass weld test 3G & 4G. MIG/Flux-core weld processes.
• Structural welding and fitting experience 3-5 years.
• Fit, cut and tack material.
• Prepare welding joints.
• Conventional and measuring instruments.
• Finish grinding applications using manual/power tools.
• Resume required.

1st shifts 6am to 6:30pm; Mon to Sat

2nd shifts 5:30pm to 4:00am; Mon to Sat. 2nd shift pay differential

Pay range: $24-$30 depends on experience

#nowhiring

Mechanical and Electrical Assemblers

Mechanical Assembler

• Perform manual processes to complete mechanical and sub-assemblies, using hand tools, and electronic and pneumatic tooling.
• Familiar with assembly and measuring tools, interpret visual aids and must be able to perform simple shop math.

Requirements: 

• Minimum one year working within a manufacturing environment. 
• Ability to read and interpret P&ID, ISO, and engineering assembly drawings
• Ability to read fabrications drawings is a plus
• May work at different workstations as production needs require or shift from one station to another during the assembly process.

Pay: $17 – $24; depends on experience

Shift: 1st shift 6:00 am – 5:30 pm. 10 to 12 hour shifts and Saturdays required.

Electrical Assembler

• Perform manual processes to complete mechanical and electrical assemblies and sub-assemblies, using hand, electric and pneumatic tooling
• Complete tasks as directed by manufacturing schedule with minimum supervision

Requirements:

• Familiarity with assembly and measuring tools, interpretation of visual aids and ability to perform simple shop math.
• Competency in reading and interpreting engineered drawings, schematics or other technical documents.

Pay: $18 – $25 depend on experience

Shift: 1st shift 6:00 am – 5:30 pm. 10 to 12 hour shifts and Saturdays required.

Have the ability to lift up to 50 lbs.

Expected to stand for 8–10 hour shifts

Facility is a non-climate-controlled environment

#nowhiring

Steel toed footwear and resume

Pipe Welder

Job Summary:

Pipe welder proficient in welding techniques

Duties: 

• Proficient in assigned welding techniques.
• Interpretation of mechanical drawings, including the ability to read weld symbols.
• Knowledge of wire and filler materials applications for various steel alloys, aluminum, and some exotic materials.
• Working knowledge of fixturing and weld set up parameters (amps, volts, etc.).
• Convention and precision measuring instruments.
• Process inspection, certification, and documentation. 
• Welding equipment maintenance and inspection.
• Finish grinding applications using manual and power tools.
• Safety and housekeeping.
• Other duties as assigned by supervisor.

Requirements: 

• Minimum 3+ year experience working within a manufacturing environment/facility 
• Able to lift up to 50 lbs.
• Able to stand for 8–10-hour shifts

Pay: $25-$31 depends on experience

Shift: 2nd shift – 6:00 pm – 5:30am, (flexible to 10-hour shifts/Saturdays required)

#nowhiring

Steel toed footwear

Pipe Fitters

Pipe Fitters for day or night positions

Job Summary:

Pipe Fitter lay out, assemble, install and maintain pipe systems, pipe supports, and related hydraulic and pneumatic equipment.

Duties:

• Interpretation of mechanical drawings, including the ability to read weld symbols
• Knowledge of wire and filler materials applications for various steel alloys, aluminum, and some exotic materials
• Working knowledge of fixturing and weld set up parameters (amps, volts, etc.)
• Convention and precision measuring instruments
• Process inspection, certification, and documentation
• Welding equipment maintenance and inspection
• Finish grinding applications using manual and power tools
• Safety and housekeeping
• Other duties as assigned by supervisor

Requirements:

• Minimum 3+ year experience working within a manufacturing environment/facility
• Be prepared to stand for 8–10-12 hour shifts
• Resume required

Pay: $25-$33 depends on experience. 2nd shift differential.

Shift: 1st shift – 6am – 6:00pm (flexible to work 10/12 hours)

Shift: 2nd shift – 4:30 pm – 3:30 am (flexible to 10-hour shifts/Saturdays required)

#nowhiring

Steel toed footwear

?? Position: Assembly Technician – Cooling Systems

• Location: Romulus, MI
• Shifts Available:
  • 5:00 AM – 3:30 PM (First Shift)
  • 4:00 PM – 2:20 AM (Second Shift)

?? Pay & Incentives

• $16.00/hr – First Shift
• $16.35/hr – Second Shift
• $100 Weekly Attendance Bonus for perfect attendance

?? What You’ll Do

• Assemble cooling systems for Ford vehicles
• Use hand tools and follow detailed work instructions
• Perform quality checks to ensure all components meet standards
• Maintain a clean and safe work area
• Work as part of a production team to meet daily goals

? Requirements

• Ability to stand for 8–10 hours
• Comfortable with repetitive assembly tasks
• Reliable transportation and strong attendance
• Ability to lift up to 25–30 lbs

6 months previous experience required

PPE's: may include safety glasses and gloves Hair must be pulled back, no jewelry, no loose clothing. Need to have Non slip gym shoes. Shorts are NOT allowed Assembly line for manufacturer of laundry and cleaning products. You will be: packing picking palatalizing making boxes labeling capping etc…. Must be able to work in a fast paced environment. Must have the ability to work 8,10 Must have the ability to work with chemical production and/or filling lines Must maintain good housekeeping practices. Must be able to work in a fast paced environment. On call for 90 day assignment

NOW HIRING 

?? What You’ll Do

• Arrive on time and ready to work each day
• Follow all safety procedures and client guidelines
• Report any product or process issues to your team lead
• Keep your work area clean, organized, and inspection-ready
• Operate machinery such as case erectors, packers, and sealers
• Requisition materials needed for production
• Hand-pack bagged products with care and attention to quality
• Inspect packaging and product integrity to ensure top standards
• Maintain a safe, clean workspace in compliance with GMP and safety regulations

?? Key Requirements Basic communication skills in English

Ability to perform repetitive tasks efficiently

Must be able to lift 50 lbs or more

Comfortable working in extreme temperatures Ability to stand for extended periods

Now Hiring Production Associates – 2nd & 3rd Shifts

?? Automotive Manufacturing – DENSO

?? $20.18 – $20.56 per hour

?? 2nd & 3rd shifts available

ResourceMFG is now hiring Production Associates to work at DENSO, a leading automotive manufacturer. If you’re dependable, detail-oriented, and ready to work in a fast-paced team environment, we want to connect with you!

Job Responsibilities:

    •    Maintain high attention to detail in all production tasks

    •    Meet required cycle times and daily production goals

    •    Work collaboratively in a team setting

    •    Perform routine quality checks to ensure product standards

    •    Follow all safety guidelines with a safety-first mindset

    •    Load and unload automotive parts

What We’re Looking For:

    •    Ability to work in a fast-paced manufacturing environment

    •    Strong teamwork and communication skills

    •    Commitment to quality and safety

    •    Ability to stand for extended periods and lift as needed

Why Apply Through ResourceMFG?

    •    Competitive weekly pay

    •    All shifts available

    •    Opportunity to work with a well-established automotive manufacturer

    •    Dedicated staffing support team

Apply today with ResourceMFG to start your career at DENSO!

Ability to work in a fast paced automotive manufacturing environment, High attention to detail, ability to stand for 8-12 hours in one shift.

Forklift Operator – Shipping / Materials

Location: Cadillac, MI

Pay: $18.00/hour (All Shifts Available)

Key Responsibilities

• Repack products according to customer specifications and quality standards
• Accurately label all containers and verify quantities
• Safely operate material handling equipment, including Hi-Lo (forklift)
• Use RF scan gun systems to split, combine, and track inventory
• Verify shipments using customer pick sheets
• Locate parts within inventory and identify components for finished goods
• Maintain a clean, organized, and safe work environment
• Follow all work instructions, procedures, and company policies
• Assist with shipping, receiving, and dock operations as needed
• Identify and report any safety hazards or concerns
• Comply with all Health, Safety, and Environmental guidelines
• Support additional tasks and assignments as needed

Qualifications

• Strong attention to detail and ability to follow instructions accurately
• Good communication skills and ability to work as part of a team
• Basic math and problem-solving skills
• Prior forklift (Hi-Lo) experience preferred
• Experience using RF scanners and basic computer systems

What We Offer

• Competitive pay at $18.00/hour
• Weekly pay options (Direct Deposit or Pay Card)
• Access to health benefits and retirement plans
• Opportunity for growth and long-term employment
• A safe, team-oriented work environment

ResourceMFG is hiring in Midway KY!

Start Immediately!

1st, 2nd and 3rd Shifts Available

$16 -$17 PER HOUR

• Warehouse, outbound shipping
• Must be able to lift up to 50lbs and team lift when needed
• Loading pallets and shipments, operating electric pallet jack

Benefits of Joining the ResourceMFG Team: 

• Weekly Pay – Every Friday 
• Comprehensive Medical Benefits Available for Your Entire Family 
• Free Online Education 
• Performance to Hire Opportunity 

Apply Today!

Lifting up to 50lbs, standing up to 8-10 hours per day

Now Hiring: Press Operators – Molding Department

Cadillac, MI

Attention: Reed City, Traverse City & Cadillac Areas!

Assembly Resource MFG is currently hiring Press Operators for our molding department. We have immediate openings on all shifts at a great facility in Cadillac. This is a temp-to-hire opportunity with on-the-job training, competitive pay, and a supportive work environment.

Pay

$21.25/hour

Available Shifts

• 1st Shift: 7:00 AM – 3:00 PM
• 2nd Shift: 3:00 PM – 11:00 PM
• 3rd Shift: 11:00 PM – 7:00 AM

Key Responsibilities

• Operate injection press, Sacomat press, or assembly equipment
• Perform in-line testing to ensure product quality
• Follow process sheets and production guidelines carefully
• Verify components and materials before use
• Complete required traceability logs, lab sample tags, and production reports

What to Expect

We partner with employers who provide:

• A safe and clean work environment
• An employee-focused culture
• Ongoing safety programs and training

As a ResourceMFG Employee, You’ll Receive

• Competitive weekly pay
• Weekly pay options (Direct Deposit or Pay Card)
• Access to health benefits and a retirement plan
• Opportunity for long-term employment

NOW HIRING: Machine Operators – 2nd Shift

NTN Driveshaft • Columbus, IN

Pay: $20.50/hr

Shift: 2:15pm – 10:30pm

Join a global leader in automotive manufacturing! NTN Driveshaft is growing and looking for reliable, hardworking team members to join our 3rd-shift production team. If you’re looking for steady work, great pay, and long-term opportunity, this is the place for you.

Positions Available

Machine Operators

What You’ll Do

• Operate manufacturing equipment safely and efficiently
• Assemble high-quality automotive components
• Perform routine quality checks
• Follow standard operating procedures
• Work in a fast-paced, team-oriented environment

What We Offer

• $20.50/hr starting pay (2nd shift)
• Overtime opportunities
• Weekly pay
• Growth and long-term career paths
• Safe, clean, climate-controlled facility
• Supportive team environment

What We’re Looking For

• Strong work ethic and consistent attendance
• Ability to stand for extended periods
• Basic mechanical aptitude (preferred but not required)
• Ability to lift up to 40 lbs

Assembler – Production Line

Cadillac, MI

Starting at $17.50/hour (All Shifts Available)

Assembly Resource MFG is seeking reliable and motivated Assemblers to join our team in the Cadillac area! If you enjoy working with your hands, are detail-oriented, and thrive in a fast-paced production environment, we want to hear from you.

Position Summary

In this role, you will inspect and build parts by assembling components on a production line. You will play a key role in ensuring quality products and supporting efficient manufacturing operations.

Responsibilities

• Assemble parts using hand tools or machinery
• Follow work instructions and process sheets accurately
• Perform quality inspections to check for defects
• Meet production speed and output goals
• Pack and move finished products as needed
• Maintain a clean and safe work environment
• Report any issues or concerns to your supervisor

Qualifications

• Strong attention to detail
• Ability to follow instructions and work procedures
• Dependable and punctual
• Ability to work in a fast-paced environment
• Previous manufacturing or assembly experience is a plus but not required

What We Offer

• Competitive starting wage of $17.50/hour
• All shifts available (flexible scheduling options)
• Opportunity for growth and advancement
• Supportive team environment

ResourceMFG is Hiring for Warehouse openings as Shipping, Receiving, Inventory control and Forklift.

Shift Day & Time:

7:00AM-3:30PM Monday-Friday

Pay Rate: $17.00 – $18.00 an hour

Job Responsibilities:

• Receiving & Processing: Unload and verify incoming shipments against purchase orders; inspect for damage or missing items.
• Storage & Organization: Store products in designated locations using forklifts, pallet jacks, or other equipment; maintain a clean, safe, and organized work environment.
• Order Fulfillment: Pick items from inventory according to picking lists or scanner instructions; assemble and pack orders for shipment.
• Shipping: Load outbound trucks or containers with products, ensuring proper stacking and securing
• Inventory Management: Perform cycle counts, stock checks, and enter data into warehouse management systems (WMS)
• Equipment Operation: Operate forklifts, pallet jacks, and other warehouse machinery; conduct pre-use inspections and report malfunctions.
• Quality & Safety: Inspect products for defects; follow OSHA and safety standards; report hazards or violations.

Forklift Operator in Toledo, OH

Location: Toledo, OH

Shift: All Shifts Available

Pay:$16 per hour

Position Overview: We are seeking experienced Forklift Operators to join our team. The ideal candidate will have at least 3 years of forklift operating experience and a strong attention to detail.

Key Responsibilities:

• Safely operate forklifts to move materials within the warehouse
• Pull and pack parts accurately and efficiently
• Load and unload trucks with precision
• Maintain a clean and organized work area
• Adhere to all safety protocols and procedures

Requirements:

• Minimum of 3 year of forklift operating experience
• Strong attention to detail and organizational skills
• Steel-toed boots required
• Basic computer skills

Benefits:

• Competitive pay at $16 per hour
• Comprehensive medical plans available
• Attractive referral bonus program
• Access to FREE online college courses

Warehouse Looking For Sequencers

Location: Toledo, OH

Job Description:  Pulling orders and packing using a computer system and scanner.

Pay: $15 an hour

Shifts: All Shifts Available

Tasks to Perform:

• Pull and pack parts
• Scanning parts into the system and creating labels
• Loading and unloading trucks

Job Requirements:

• Attention to detail 
• Steel toed boots
• Computer knowledge

Benefits:  

• Medical Plans Available
• Referral Bonus
• FREE online college courses

Apply Today!

Job Posting: Forklift Drivers– 2nd and 3rd shift

Location: Clyde, OH

Shifts: Full-Time | 2nd and 3rd Shifts Available (Evening, Overnight)

Pay: $18.64 – $19.66/hr (Paid Weekly)

Join Our Team!

Are you looking for a stable, rewarding career in logistics? A company in Clyde, OH is hiring Forklift Drivers to support our growing operations. Whether you're an early riser or a night owl, we have a shift that fits your lifestyle!

What You’ll Do:

• Load and unload trailers using manual or powered equipment
• Sort and organize freight for delivery
• Perform inventory checks and maintain accurate records
• Ensure a clean, safe, and organized work environment
• Collaborate with team members and supervisors to meet daily goals

What We’re Looking For:

• High school diploma or equivalent preferred
• Ability to lift up to 50 lbs and stand for extended periods
• Previous warehouse experience is a plus, but not required
• Strong attention to detail and reliability
• Willingness to work flexible shifts and overtime as needed

CNC Operator – Now Hiring

Location: Waterville, OH

Pay: $22/hour

Schedule: Full-Time

Join the Team

Local Company is seeking a skilled and dependable CNC Operator to join our growing team in Waterville, OH. If you’re looking for a stable opportunity with competitive pay and a company that values quality and teamwork, we encourage you to apply.

What You’ll Do

• Set up and operate CNC machines to produce precision plastic components
• Read and interpret blueprints, work orders, and specifications
• Monitor machine performance and make adjustments as needed
• Inspect finished products to ensure quality standards are met
• Perform basic troubleshooting and routine maintenance
• Maintain a clean, safe, and organized work environment

What We’re Looking For

• Previous CNC operating experience required
• Ability to read blueprints and use measuring tools (calipers, micrometers, etc.)
• Strong attention to detail and quality
• Ability to stand for extended periods and lift up to 50 lbs
• Dependable, self-motivated, and team-oriented
• High school diploma or equivalent preferred

Quality Inspector – Now Hiring

Location: Tiffin, OH

Pay: $15 an hour

Schedule: Full-Time

Join Our Team

We are seeking a detail-oriented and reliable Quality Inspector to ensure our products meet the highest standards. If you take pride in accuracy, quality, and consistency, this is a great opportunity to grow your career in a stable manufacturing environment.

What You’ll Do

• Inspect parts and finished products to ensure they meet quality standards
• Follow inspection procedures, work instructions, and specifications
• Use measuring tools such as calipers, micrometers, and gauges
• Identify defects and document findings accurately
• Work closely with production teams to maintain quality standards
• Maintain a clean and organized work area
• Follow all safety policies and procedures

What We’re Looking For

• Previous quality inspection or manufacturing experience preferred
• Ability to use basic measurement tools
• Strong attention to detail and accuracy
• Ability to stand for extended periods and lift up to 40–50 lbs
• Dependable with a strong work ethic
• Basic computer or paperwork skills for documentation
• High school diploma or equivalent preferred

Why Join Us

• Competitive pay and stable hours
• Opportunity to grow and develop new skills
• Team-oriented and safety-focused environment
• Consistent, full-time work

Forklift Operator in Leipsic, OH

Location: Leipsic, OH

Shift: All Shifts Available

Pay:$20-23 per hour

Position Overview: We are seeking experienced Forklift Operators to join our team. The ideal candidate will have at least 3 years of forklift operating experience and a strong attention to detail. This is a 2/2/3 schedule

Key Responsibilities:

• Safely operate forklifts to move materials within the warehouse
• Pull and pack parts accurately and efficiently
• Load and unload trucks with precision
• Maintain a clean and organized work area
• Adhere to all safety protocols and procedures

Requirements:

• Minimum of 3 year of forklift operating experience
• Strong attention to detail and organizational skills
• Steel-toed boots required
• Basic computer skills

Benefits:

• Competitive pay at $20-23 per hour
• Comprehensive medical plans available
• Attractive referral bonus program
• Access to FREE online college courses

Quality Inspector – Now Hiring

Location: Carey, OH and Upper Sandusky, OH

Pay: $15 an hour

Schedule: Full-Time

Join Our Team

We are seeking a detail-oriented and reliable Quality Inspector to ensure our products meet the highest standards. If you take pride in accuracy, quality, and consistency, this is a great opportunity to grow your career in a stable manufacturing environment.

What You’ll Do

• Inspect parts and finished products to ensure they meet quality standards
• Follow inspection procedures, work instructions, and specifications
• Use measuring tools such as calipers, micrometers, and gauges
• Identify defects and document findings accurately
• Work closely with production teams to maintain quality standards
• Maintain a clean and organized work area
• Follow all safety policies and procedures

What We’re Looking For

• Previous quality inspection or manufacturing experience preferred
• Ability to use basic measurement tools
• Strong attention to detail and accuracy
• Ability to stand for extended periods and lift up to 40–50 lbs
• Dependable with a strong work ethic
• Basic computer or paperwork skills for documentation
• High school diploma or equivalent preferred

Why Join Us

• Competitive pay and stable hours
• Opportunity to grow and develop new skills
• Team-oriented and safety-focused environment
• Consistent, full-time work

Quality Inspector – Now Hiring

Location: Findlay, OH

Pay: $15 an hour

Schedule: Full-Time

Join Our Team

We are seeking a detail-oriented and reliable Quality Inspector to ensure our products meet the highest standards. If you take pride in accuracy, quality, and consistency, this is a great opportunity to grow your career in a stable manufacturing environment.

What You’ll Do

• Inspect parts and finished products to ensure they meet quality standards
• Follow inspection procedures, work instructions, and specifications
• Use measuring tools such as calipers, micrometers, and gauges
• Identify defects and document findings accurately
• Work closely with production teams to maintain quality standards
• Maintain a clean and organized work area
• Follow all safety policies and procedures

What We’re Looking For

• Previous quality inspection or manufacturing experience preferred
• Ability to use basic measurement tools
• Strong attention to detail and accuracy
• Ability to stand for extended periods and lift up to 40–50 lbs
• Dependable with a strong work ethic
• Basic computer or paperwork skills for documentation
• High school diploma or equivalent preferred

Why Join Us

• Competitive pay and stable hours
• Opportunity to grow and develop new skills
• Team-oriented and safety-focused environment
• Consistent, full-time work

Machine Operator

Growing manufacturing company in

Corona has an immediate opening on 1st shift.

Great opportunity for growth! Temp-hire opportunity don’t miss out!

Schedule: 1st: 7am-3:30pm, Mon-Thurs only.

Pay: $17.50

Job Duties will be:

• Operating machine
• Manufacturing medical devices.
• Will be trimming off extra material on product.
• Will be counting parts and documenting.
• Must have a good mathematical skills
• Must have steel toe boots

Benefits We offer:

• Medical Plans
• Weekly Pay
• Referral Bonus
• Free Online Courses

Apply now! Positions are immediate.

Must be able to stand for full shift. Must be able to wear steel toe shoes