Quality Technician – Cleveland TN

Monday- Friday

Job Duties:       Ensures motors and router are in agreement along with the motor tag part number/customer number being in agreement with Eaton work order • Makes certain that all uncoated surfaces are free from contamination i.e. rust and over spray on shaft, castle nut, bearing housings and pilot shaft • Inspects entire motor, no substrate shall be visually detected on painted surfaces, all paint shall be smooth and continuous in appearance • Checks all motor tags for damage and ensures no substrate can be seen around the perimeter of the tag • Applies rust preventative liberally to all unpainted surfaces • Follows directive of Quality Supervisor to pack out motors by using two hands and gently laying them into shipping box • Reports any non-conform parts to Quality Supervisor • Performs other duties as assigned by Quality Supervisor/Manager or Plant Manager

• Weekly Pay
• Temp To Hire
• Medical/ Dental 
• Referral bonuses 

• Attention to detail
• Previous QC or Inspection experience needed

#nowhiring

Automotive Production Assembly Workers Wanted. Now taking applications for these temp to hire positions with start dates between 8/5 – 8/19 for most applicants. MUST speak English fluently for safety reasons.

Fantastic Job Opportunity. Good Pay & Benefits.

Location: Princeton, IN

Shift and Pay: 

• 6:30am – 3:15pm – $18.00/hr
• 7:15pm – 4:00am – $19.00/hr

Job Responsibilities: 

• Follows Standard Work Process. Performs a specific task or a number of predetermined tasks in the assembly process.
• Performs repetitive tasks such as attaching or affixing pre-manufactured components and parts to main product as it moves through the production line.
• Prepares parts for shipment.
• Notifies Team Leader of defective parts, equipment, tools, materials, nonstandard assembly work or other conditions, which hinder the assembly process.
• Ensures that the time, material and waste is minimized.
• Other duties as assigned.

Benefits:

• Competitive pay
• Paid weekly 
• Medical, Dental, Vision Benefits Available
• Expedited Hiring Process

#nowhiring

Job Requirements: 

• Knowledge of basic hand and power tools
• Ability to follow verbal and written instructions
• Safety Focused
• Emphasis on Teamwork
• Overtime: mandatory when scheduled
• MUST speak English fluently due to safety

 We are ready for YOU to Apply Today! 

#nowhiring

Looking for Assembly techs and Enclosure Techs with sit down forklift experience for an elite client in Randleman, NC on 1st shift

Hours and Pay rate

• 1st Shift 6am-2:30pm Mon-Fri
• $18.50-20.00hr

Job Duties of Assembly and Closeout techs:

• Assemble large mechanical components of a generator and wiring of controls and house power
• Sit Down forklift
• Read blue prints
• overhead crane

Why work for ProLogistix/ResourceMFG?

• Great places to work
• Weekly pay periods
• Unlimited referral bonuses
• Health / Dental / Vision Benefits offered 
• FREE career focused online classes

Apply Now!

• Sand material in preparation for painting/powder coating
• Operate automated equipment used in the paint prep process
• Apply epoxy to material as needed in preparation for painting/powder coating.
• Hang material and load on conveyor line for powder coating.
• Plug threaded holes on parts in preparation for powder coating.
• Unload parts off conveyor line and package.
• Mask parts in preparation for liquid paint application
• Clean conveyor line hooks using abrasive blast media
• Adhere to Standard Work for all tasks performed
• Maintain regular, punctual attendance
• Conduct user-driven maintenance of tools and equipment, as assigned
  Adhere to all safety standards
•  Work both independently and in a team environment, as required
• Perform other duties as assigned by Lead, Supervisor, or Department Manager

• • Excellent communication skills.
  • Excellent interpersonal skills.
  • Ability to lift-up to 50lbs. continuously as needed.
  • Ability to operate industrial power trucks and equipment as needed.
  • Read and write English Fluently.
  • Must be able to obtain a high degree of knowledge of BEGA inventory parts (3-6months learning period).
  • Prior shipping and receiving experience a plus.
  • Team Player.
  • High School diploma/GED preferred.

  Ability to work in a fast-paced environment with frequently changing dynamics

New Exciting Job Opportunity! Scale Operator!
Lariat, Tx.

A Company That Works for You!
ResourceMFG, an established and well-respected leader in an Agriculture market, is searching for reliable individuals to join our team as Scale Operator. Reliability and strong work ethic are qualities, we look for in all of our associates. In return, you will earn competitive weekly pay and benefits, and a great company culture. Because when you work for ResourceMFG, you work for a company that treats you well and values your work, a company you can trust.

• 7:30am to 5pm Monday- Friday (When not in Harvest)
• 7:30am to finish Monday- Saturday 12:00pm to finish on Sunday (During Harvest)
• $15.00 per hour

We Require Our Customers to Offer:
• Safe and clean work environment
• Employee focused workplace
• Safety programs and training
As a Scale Operator We Offer You:
• Paycheck every Friday with direct deposit option
• Refer your friends and get a bonus for each one who meets the hours requirement
• Medical Benefits and Retirement Plan available

Scale Operator Job Duties:
• Weighing Trucks
• Collecting and Reviewing Manifests
• Recording all data into system with precision
• Running Reports
• Sampling inbound and outbound materials for quality control
• Coordinate with elevator staff
• Ensure scale house is clean and organized

Job Requirements as a Scale Operator:
• Basic Computer skills
• Data Entry
• Detail oriented with excellent math skills
• Customer Service Oriented
• Ability to work in indoors/outdoors
• Ability to lift 50 lbs. consistently
• Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb and/or sit frequently or through the duration of the shift
• #rmfgindeed

Experienced CNC Mill Turn Machinist Wanted
Great Job Opportunity in El Cajon, CA
2nd Shift

Competitive Pay & Benefits. Great Company. What are You Waiting For?

Ready to amp up your CNC Mill Turn Machinist skills with ResourceMFG? We  are NOW HIRING  at one of the leading manufacturing sites in town. If you’re all about details, love teamwork, and know your machinery, this job is spot on for you. Score competitive pay, benefits  and perks in a safe and friendly workplace.

• 2:30pm-11pm Monday-Friday
• $31-$47/hour DOE
• Temp to hire opportunity 

Responsibilities:

• Operate mill-turn CNC machines (e.g., Nakamura, Doosan, Mazak Integrex, DMG MORI NT/NX series, Okuma Multus) to produce high-precision parts.
• Interpret complex engineering drawings, 3D models, and GD&T specifications to ensure compliance with dimensional requirements.
• Perform in-process and final inspections using precision measurement tools such as micrometers, calipers, height gages, and CMMs to ensure quality.
• Select appropriate tooling and fixturing to support multi-operation machining in a single setup.
• Work with a variety of metals and exotic materials, including high-strength alloys, stainless steel, and other aerospace-grade materials.
• Collaborate with engineers and manufacturing staff to refine machining strategies and improve part flow.
• Maintain tight tolerances and surface finishes, especially on concentric and symmetric features requiring both milling and turning.

• Minimum 6+ years of experience in precision machining, with at least 3 years operating and programming mill-turn equipment.
• Strong proficiency in CNC programming (G-code and conversational) and use of CAD/CAM software for multi-axis operations.
• Deep understanding of multi-axis tool paths, work offsets, sub-spindles, and live tooling integration.
• Solid knowledge of geometric dimensioning and tolerancing (GD&T) and the ability to work from complex part prints and solid models.
• Familiarity with high-performance materials including stainless steel, titanium, Inconel, and other aerospace-grade alloys.
• Skilled in using a variety of precision inspection tools, including CMMs.
• Excellent troubleshooting skills and ability to optimize cycle times and minimize tool wear.
• Strong work ethic, attention to detail, and commitment to delivering defect-free components

• Physical ability to lift/move up to 40 lbs, perform repetitive tasks, and stand for extended periods.
• Prior experience in defense, aerospace, or RF component manufacturing is a strong plus.

Are you ready to be part of a fast-paced, fun, and flavor-filled environment where your skills make a real difference? We’re on the hunt for a Food Production Machine Operator to help us keep the wheels turning (and the snacks rolling!) in our dynamic production facility. If you’re mechanically minded, quality-driven, and love working in a team – this could be your perfect recipe for success!

Key Responsibilities:

• Set up, operate, monitor, and troubleshoot food production machinery

• Ensure equipment is running efficiently and safely during production

• Maintain accurate production logs and complete daily reporting

• Perform routine cleaning and minor maintenance on machines

• Monitor product quality and ensure compliance with food safety standards

• Collaborate with team members and supervisors to meet daily production targets

• Follow all safety protocols and procedures

Requirements:

• Previous experience in food production or machine operation preferred

• Basic mechanical aptitude and troubleshooting skills

• Ability to lift up to 50 lbs. and stand for extended periods

• Strong attention to detail and commitment to food safety

• Flexible to work shifts, weekends, or overtime as needed

What We Offer:

• Competitive hourly pay 

• Multiple shifts available 

• Health, dental, and vision insurance

• Opportunities for advancement and cross-training

• A supportive, team-first culture where your work is appreciated!

Ready to Power the Production Line?

Don’t just work—make an impact in every bite. Apply now and bring your energy, efficiency, and excellence to our food-loving team!

General Manufacturing Laborer – Bradenton, FL

Pay: $14.50 – $15.00 per hour
Schedule: 8-10 hour shifts, lots of overtime opportunities, weekend availability required
Location: Bradenton, FL 

Now Hiring for General Manufacturing Laborers!

Join a well-established manufacturing team in Bradenton. Help with production, packaging, and quality checks of food products. No experience needed – we provide full training.

Job Details:

• Stand for long periods (10+ hours)
• Frequent bending and lifting up to 50 lbs
• Work around water and slippery floors
• Must follow all safety and hygiene guidelines, including hair and beard nets

Benefits:

• Medical, Dental, Life Insurance
• Growth opportunities
• Paid online courses
• Overtime opportunities

Who We’re Looking For:

• Energetic and reliable workers ready to learn
• Must be available to work weekends
• Comfortable in a fast-paced environment

Apply today and start your path to steady, reliable work with great benefits in Bradenton, FL!

 #apply25

Now hiring for 2nd & 3rd shift forklift operator in Troy Ohio.

Shift: 2:30pm-10:30pm/10:30pm-6:30am

Pay: $20.10 an hour

Job Details:

•  Off loading trailers of product, repackaging, relabeling
• Accurately stage and sort products for loading
• Loads and unloads trailers
• Sorts and places parts in racks or other designated areas
• Complies with all safety requirements
• Electronically scan products using a warehouse management system
• Quality control
• Ensure damaged products are identified and removed when received
• Reads production schedule, customer order, work order, shipping order, or requisition to determine items to be moved, gathered, or distributed
• Maintains inventory records 

Apply Now

Weiler Manual Machinist

International manufacturer of oilfield and downhole tooling products has an immediate need for a highly skilled Weiler Manual Machinist that can setup and work within the Weiler Sinumerik system.

Opportunity

• Pay is 25 to 30 per hour, day shift – 6:00am to 2:30pm, some OT when needed
• Performance to Hire with great benefits upon hire
• Fantastic Shop

And

While working with ResourceMFG Employbridge you will experience

• Getting Paid Weekly and Direct Deposit
• Access to Multiple Medical plans and Dental, Vision and Much More
• Free online training to hone your professional skills
• Unlimited Referral Bonuses 

Client is looking for 5 years or more of experience

• Weiler Machining
• Mori Seki with Fanuc controls
• Setup and operating in the the Weiler Sinumerik System
• Metal, Plastic and Elastomer type materials
• API Threading - Buttress, IF, 8 round and Acme, Stub Acme and other straight and tapered threads
• Mics, Calipers, Thread Gauges
• Own Machining Tools and Box 
• Engineered Drawings

Client will take 3 years Weiler experience with a 1 year machining certificate from a VoTech Program

Experienced Optics Fabrication Technician

Hiring Immediately Experienced Optics Fabrication Technician

Multi Shifts/Pay $19-22 Depending on Experience

Fantastic Workplace. Committed to Your Success & Safety!

Looking for a manufacturing job that’s close to home, pays well, has good benefits, and provides a chance to boost your skills? Your search ends here! ResourceMFG is hiring experienced Machine Operators to join our team. This is your opportunity to work at a solid local manufacturing facility and take your career to new heights.

Apply now and experience working for ResourceMFG, where manufacturing workers are twice as happy working with us than our competitors.

We Require Our Customers to Offer:

• Safe and clean work environment
• Employee focused workplace
• Safety programs and training

As a ResourceMFG Machine Operator We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan

Job Requirements

• Minimum 2 Years optics experience
• Able to use basic hand and power tools
• Basic math
• Mechanical and electrical aptitude
• Ability to identify problems
• Able to multi-task
• Attention to detail
• Able to read ruler/tape measure
• Basic computer skills

Job Responsibilities

• Performs basic shaping process steps on medium difficult parts. 
• Beveling – capable of fabricating polished, double, and off-angle asymmetric bevels
• Blocking – pitch button, Norland transfer, steep singles, cold blocking, contacting, and alignment
• Grinding – Steep radius, cylinder, tight wedge, continuous
• Polishing – spindle, CP, double side, CNC polish
• Slurry Maintenance – maintains and measures established Baume and PH levels
• Pour pitch lap, cuts, and grooves lap
• Advanced print reading skills – can read and comprehend all fabrication specs
• Measurement skills include – Basic Zygo, understanding of fringe pattern, microscope, stereoscope, surface quality inspection, fiber light
• Performs other duties as assigned

Working for ResourceMFG

If you’re looking for a job in manufacturing, ResourceMFG specializes in you! We are America’s largest staffing company with over 30 years in business, putting more than 24,000 people to work nationwide, each week. A company that treats you like family, we’re committed to providing equal opportunities to all, a healthy and safe work environment, fair pay, and the tools to succeed and grow.

* This position includes the opportunity to enroll in Medical, Dental, Vision, Term Life, and Short-Term Disability benefits, as well as a Retirement Plan.  All Colorado Associates are also entitled to accrue, and use paid sick and safe leave.

Now Hiring for Batch Makers in Elgin, IL

1st and 2nd shifts

Pay based on experience and shift differential

Position Summary:

Responsible for issuance, review and maintenance of all batch records.

Duties include but not limited to:

• Receive, understand and follow all written and oral instructions
• Communicate all concerns and other work related issues to Supervisor/Manager.
• Comply with all company policies and procedures including safety and attendance requirements.
• Complete all paperwork and maintain all files associated with the position.
• Participate in performance improvement measures and tasks. Recommends improvements.
• Participate in training and is accountable for learning the material and information.
• Perform other tasks as assigned by Supervisor/Manager.
• Issues batch records based on requests from Planning.
• Must assign a sequential lot number and record in the Finished Product log.
• Fills out component requirements for all batch records.
• Reviews all finished batch records for completeness and accuracy.
• Responsible for ensuring that any corrections or omissions are taken care of in a timely manner.
• After release by the QA Supervisor/Manager, ensures that the Shipping Department is notified that the product is released for Distribution.
• Issue release stickers to QC for application to approved product.
• Keep all files in a neat and orderly fashion.
• Any additional projects assigned by Supervisor/Manager

Apply now!

This position includes the opportunity to enroll in Medical, Dental, Vision, Term Life, and
Short-Term Disability benefits, as well as a Retirement Plan. All Illinois talent are also
entitled to accrue and use paid time off. Additional benefits information can be found
here: https://www.prologistix.com/employees/benefits/ 

#nowhiring

• Previous experience in batch making
• Previous experience in GMP regulated setting
• Ability to stand, bend, stoop, walk for entire shift
• Ability to lift up to 50 or more pounds
• Ability to work in extreme temperatures

#nowhiring

Now Hiring General Labor Associates in Brownsville TX!

The ideal candidate will have a keen eye for detail and a commitment to safety and quality. 

Pay: $10-11/hr paid Weekly!

Schedule: Monday thru Sunday 

7am- 3pm $10

3pm – 11pm $11

11pm – 7am $11

Responsibilities:

• Use tools to make or repair parts and products.
• Interpret technical documents such as diagrams, schematics, blueprints, and other verbal or written instructions.
• Collaborate with other members of the line or group to assemble products.
• Maintain a clean and organized workspace.
• Adhere to all company and industry safety requirements.
• Identify and handle defective items according to established procedures.
• Use problem-solving skills to address issues as they arise.

Requirements:

• Strong attention to detail.
• Excellent hand-eye coordination.
• Ability to stand for 8–12-hour shifts.
• Perform various physical duties as assigned.
• Willingness to perform repetitive tasks while sitting or standing for extended periods.
• Capable of performing specialized tasks with on-the-job training.
• Ability to effectively use heavy and light equipment, depending on the jobsite/assignment.

As a ResourceMFG Associate We Offer You:

*Competitive weekly Pay (Direct Deposit or ATM Debit Card available)

*Access to health benefits and retirement plan

*$100.00 Referral Bonuses

*Mobile App - easy access to paystubs & W2 and More!

*A personal recruiter to help with job searches and assistance when at work!

ResourceMFG is now hiring General Operators in Switz City/Worthington for a Fortune 500 company. 

$19.50 on 1st shift. $21.50 on 3rd shift. Must be able to work either shift during the production year on a rotating schedule. 40 to 45 hours per week. 

No experience required

Start date: Aug 4th and Aug 18th

Duties:

• Inspecting 
• Inventory management
• Sorting
• Packaging
• Support maintenance and cleaning 
• Safely perform duties in timely fashion while maintaining quality
• Work independently or with a team
• Adjust to changing conditions and anticipate need
• Make independent decisions

Benefits:

• Health, dental, and vision coverage available
• Weekly pay

QUALIFICATIONS/BASIC JOB REQUIREMENTS:

• Must pass pre-employment screenings including an onsite interview
• Must have reliable transportation
• Must be able to work long hours and rotating shifts (both 1st and 3rd shift), including OT when needed
• Able to communicate verbally and written
• Must be able to lift, push, pull 50lbs
• Must be able to walk up and down stairs and work on uneven surfaces

Now Hiring!
Printing Press Operator
Night Shift

Build Your Future: Solid Pay. Strong Team. Where Your Success Matters.
No need to spend your time searching for “manufacturing jobs hiring near me” because ResourceMFG is NOW HIRING Press Brake Operators in your area. Benefit from competitive weekly pay, solid benefits, and the chance to level up  your skills. 

Get to work with the only staffing company offering FREE online training after you complete 80 work hours! Join our team today!

“Working for ResourceMFG has been my favorite job so far because of how cool the bosses and staff are.” ResourceMFG Associate, Sierra

We Require Our Customers to Offer:

• Safe and clean work environment
• Employee focused workplace
• Safety programs and training

As a ResourceMFG Machine Operator We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan

Job Description:

• Ensure paper or raw materials (inks, glues, etc.) are loaded into feeders, hoppers, bins, etc. to supply a constant flow of materials while the equipment is running.
• Make adjustments to equipment such as feeder mechanism based on the size of the paper.
• Deliver equipment components such as plates or spray heads to the equipment for installation.
• Provide basic assistance as needed to make-ready the equipment for operation. Assist with retrieving plates, hanging plates and recycling/storing plates and other tasks associated with make-ready of the plates.
• Requires basic knowledge of presswork procedures and materials learned through on the job training.
• Ability to follow instructions to assist in press set up, operation and maintenance. Able to operate hand carts, pallet jacks, stackers, and hydraulic feed mechanisms. Qualifications
• Requires thorough knowledge of offset printing procedures, materials and specifications, equipment, and safety requirements and skills to perform assignments

 #apply25

Schedule: Monday-Friday 11 pm – 7 am 

Qualifications Required:

As a press brake operator you would be responsible reading, understandings specifications, preforming basic periodic maintenance and printing. 

• Skill to read and understand job specifications and knowledge of press capabilities to determine the most appropriate press usage, press settings and materials needed to run the job successfully
• Skill to make a variety of difficult precise settings of controls, settings, and adjustments, and to perform routine operational maintenance of equipment
• Skill in routine operational maintenance and minor repairs to equipment Knowledge of the appropriate amount of packing pressure needed to obtain the proper printing pressure for the type of job being run
• Use of micrometer to mount and align the printing plate correctly

Tube Machine Operator – Precision Manufacturing Team

Location: San Jose
Schedule: Full-Time 
Compensation: Competitive pay + benefits

Role Overview

We’re seeking a detail-oriented Tube Machine Operator to join our high-performance manufacturing team. You’ll play a hands-on role in shaping, cutting, and preparing tube materials—critical components used in packaging, industrial equipment, and more.

Key Responsibilities

• Operate & Maintain Equipment: Set up and run tube-forming, cutting, and bending machinery in accordance with production specs and safety standards.
• Ensure Product Quality: Conduct routine inspections and adjustments to guarantee consistent tube dimensions and material integrity.
• Troubleshoot Issues: Quickly identify and address mechanical faults to minimize downtime.
• Handle Materials Safely: Load raw materials and unload finished products; follow all handling procedures.
• Report & Record: Accurately document production metrics, maintenance logs, and shift handoffs.

Qualifications

• 2 years of relevant experience
• Mechanical aptitude and strong attention to detail
• Experience with industrial machinery or willingness to learn
• Ability to read blueprints and use measurement tools (e.g., calipers, micrometers)
• Physical capability for lifting and repetitive motion tasks
• Commitment to workplace safety and continuous improvement

Requirements:
Read, understand, and follow Quality policies and ISO directives.
Must be able to move test racks and test equipment to support test setups in various work areas.
Work in ISO9001:2000/SAE AS9100 environment
Identify process improvements to resolve hardware, procedure, and other process related issues.
2 years’ experience in RF/Electrical testing, production testing, and troubleshooting or equivalent.

Preferred Qualifications:
Strong background in electronics and RF testing and RF tuning adhering to procedures and attention to detail
Experience in defense or aerospace industry
2 years as a Test Technician in a manufacturing environment or in the military
Familiar with windows style
Associates degree or Technical Degree in Electrical Technology preferred

ResourceMFG is hiring Welders in Lexington KY! 

$20 per hour or higher, depending on experience

Direct Hire

Day shift, must have valid drivers license and ability to travel up to 1 hour away from Lexington. 

MIG welding on construction sites, installation of doors and entry way materials. 

Steel Toe Boots and welding helmet required. 

Excellent benefits available! 

Journeyman Electricians

Oklahoma License is Required

Employbridge is hiring multiple licensed Journeyman Electricians for work with in a 30 mile radius of Oklahoma City.  Multiple projects!!  There is never ending work with this client.

Great projects- long-term as well as full time opportunities available, most projects slated to go THRU 2026 with more coming!!

What’s in it for you?

• Pay is up to 40.00 per hour for Journeyman
• Working 5 – 9 and 10 hour days
• Opportunity to hire full time for the right candidates

And While working with ResourceMFG Employbridge you will experience:

• Weekly Pay and Direct Deposit
• Access to Medical, Dental, Vision and More
• Unlimited Referral Bonuses.

Client is looking for 3 - 5 Years Journeyman Experience:

• Industrial or Commercial Scope Experience is Required
• VFDs, PLCs
• Conduit and Wiring
• Underground
• Terminations
• Installation
• High Voltage Work
• Lead Teams

Oklahoma Journey License is REQUIRED

#EB

?? Job Opening: Industrial Manufacturing Associate (Temp-to-Hire)

Location: Weldon Spring, MO
Employment Type: Temp-to-Hire

?? Shift Schedule & Pay

Rotating 12-hour shifts, including weekends and holidays.

?? Job Description

Seeking dependable, hardworking individuals for a fast-paced role in industrial manufacturing. Responsibilities include machine operation, unloading, cleaning (including confined space work), and general maintenance in a hot and dusty environment. This physically demanding role offers long-term growth potential.

?? Responsibilities

• Operate and monitor industrial equipment
• Unload raw materials and finished goods
• Clean machinery and maintain workspaces
• Perform routine maintenance and report issues
• Follow all safety and quality protocols

? Requirements

• Resume and interview required
• Ability to lift up to 50 lbs regularly
• Comfortable with confined space cleaning
• Able to work in high-temperature environments
• Strong attendance and punctuality
• Respectful, team-oriented attitude
• Basic conflict resolution and tolerance for diversity
• Previous manufacturing experience preferred

?? Seasonal Support

During hot months (late spring to early fall), team members receive:

• Extra hydration
• On-site popsicles
• Flexible break schedules

?? Opportunities & Benefits (upon hire)

• Competitive shift pay
• Health, dental, and vision insurance
• Paid time off and retirement plan options
• Advancement opportunities for top performers

?? Job Opening: Industrial Manufacturing Associate (Temp-to-Hire)

Location: Weldon Spring, MO
Employment Type: Temp-to-Hire

?? Shift Schedule & Pay

Rotating 12-hour shifts, including weekends and holidays.

?? Job Description

Seeking dependable, hardworking individuals for a fast-paced role in industrial manufacturing. Responsibilities include machine operation, unloading, cleaning (including confined space work), and general maintenance in a hot and dusty environment. This physically demanding role offers long-term growth potential.

?? Responsibilities

• Operate and monitor industrial equipment
• Unload raw materials and finished goods
• Clean machinery and maintain workspaces
• Perform routine maintenance and report issues
• Follow all safety and quality protocols

? Requirements

• Resume and interview required
• Ability to lift up to 50 lbs regularly
• Comfortable with confined space cleaning
• Able to work in high-temperature environments
• Strong attendance and punctuality
• Respectful, team-oriented attitude
• Basic conflict resolution and tolerance for diversity
• Previous manufacturing experience preferred

?? Seasonal Support

During hot months (late spring to early fall), team members receive:

• Extra hydration
• On-site popsicles
• Flexible break schedules

?? Opportunities & Benefits (upon hire)

• Competitive shift pay
• Health, dental, and vision insurance
• Paid time off and retirement plan options
• Advancement opportunities for top performers

NOW RECRUITING PACKERS FOR FAST PACED PRODUCTION/MANUFACTURING ENVIRONMENT IN ELOY!

12 Hr Shifts – (AM and PM both needed)
$15.00/hour 7am-7pm & $16.00/hour 7pm-7am
Payday every Friday.
Schedule: Set schedule – No surprises.
MUST have reliable transportation.

This is a recruiting order only. While there is no current opening for this position, we are gathering applications for future opportunities as they become available.

Job Requirements
• Previous experience in a Manufacturing / Production / Assembly line environment is preferred.
• Trainable job opportunity line packing foam products / tableware into boxes and displays
• Must adhere to Company / OSHA safety standards / proper use of PPE Must adhere to proper housekeeping procedures
• Able to maintain a clean and safe work environment.

ResourceMFG is recruiting for a Sand Blaster to take on 11-month assignment with the possibility of being considered for permanent placement. This Job is with a client in the Manufacturing and Production industry and is located on the SE side of Tucson off of Valencia and Kolb.

Pay: $18.75hr

Hours: Mon-Fri 2:30pm-11pm

Job Responsibilities:

•Manually abrades surfaces of metal or hard composition objects to remove adhering scale, grease, tar, rust, and dirt, and to impart specified finish, while using sandblasting equipment

•Paint surfaces with coatings, paints, , using brushes, spray guns and rollers

•Environmental Protection Agency (EPA) approved lead paint removal certification

•Operation and maintenance of sand blast equipment to achieve various anchor profiles

•Paint surfaces with coatings, paints, , using brushes, spray guns and rollers to the appropriate MIL-STD requirements

•Operate hand sanding machines

•Completing heavy body repair

•Frame machine operation

•Commercial/fleet painting

•Prepare sandblasting bays, chambers, portable units, booths or open areas and operating controls to blast a variety of metal and nonmetal surfaces

Qualifications:

•At least one (1) year of experience desired

•Understands and follows all relevant safety procedures

•Ability to follow instructions, ask questions for clarification and take direction from management

•Ability to assume responsibility for own actions follow through on commitments

•Ability to complete work on time and with strong performance

•Determine the nozzle openings needed for sandblasting various surfaces

***Must be able to pass a Federal Background Check and a 5-panel Hair Follicle Drug Screen.

APPLY NOW!!

Does job security interest you?

The manufacturing sector is adding over 2 million jobs in the news few years. If you’re interested in investing your years of Quality Control and QA experience, into a future of excellence, the time to strike is now!

A local industry leader in protein power manufacturing is seeking a Supplier Quality Coordinator with 2-3 years of FDA or USDA Food and beverage manufacturing. If you meet the requirements below, please do not hesitate to apply today. 

Supplier Quality Coordinator /Pay $25-$28 per hour starting

This position has the ultimate responsibility in working with the internal teams, suppliers and customers in maintaining the supplier quality management database, technical documents, an approved supplier database and raw ingredient risk analysis results.         

ESSENTIAL FUNCTIONS/JOB DUTIES:  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 

• Work collaboratively with the internal teams, suppliers and customers to gather technical documents / info. for the supplier approval process.
• Maintain supplier quality management database including technical documents, approved supplier database, raw ingredient risk analysis results, etc.
• Serve as the raw material technical liaison for the internal teams, suppliers and customers.
• Work on special assignments / projects as assigned by Sr. Supplier Quality Manager or Director of Food Safety & Hygiene.

Minimum Qualifications (Must have)

• High School diploma or AA degree or relevant work experience.
• Able to read / understand technical documents.
• Proficient in MS Office programs.
• Database management experience. 

Employbridge is looking for a full time Accounts Receivables Clerk for a remote role on a temporary long term basis.

Hours: 8am to 5pm

Pay rate: $20 an hour

KEY RESPONSIBILITIES: 

Accounts Receivable

• Inputs incoming payments into Nexternal and QuickBooks, matching Payments to the appropriate Accounts Receivable Customer and Invoice(s).
• Investigate and resolve any unposted items and apply Credit Memos accordingly.
• Provide clear documentation for any discrepancies in accounting systems and ensure any adjustments are reviewed and approved by Management.
• Identify incoming credit card payments, checks, Wires and ACH payments and input into appropriate system for domestic, international and wholesale for both Edge Endo and US Endodontics. 
• Monitor bank account and lock box for incoming payments on a daily basis.
• Makes collection calls and other communications on overdue accounts and coordinates collection accounts over 90 days with the Customer Care team for further assistance. 
• Documents all collection communications in Nexternal and QuickBooks clearly and accurately.
• Updates any credit hold information as needed and coordinate updates as needed. Send monthly AR statements to customers from QuickBooks.
• Research payments and shipment information for domestic, wholesale and international customers as requested.
• Notifies the Finance Management of wire transfers, checks, credit card payments, etc. as necessary. 
• Reconciles account issues as required. 
• Excellent follow-up and follow-through are required.

KNOWLEDGE & SKILLS: 

• PC literate, general typing skills are required. QuickBooks Enterprise and bill.com experience desired.
• Ability to develop spreadsheets and reports on a computer using various software packages. 
• Strong follow-up skills required along with excellent interpersonal skills required to deal with management and non-management.

#nowhiring

We are hiring CNC machinists for a client in Claremore!

PAY: $20-25 based on experience

HOURS: 2nd shift 4pm-1:30am M-F

JOB DUTIES:

• Interpret and apply Customer Specifications Enter specifications into the CNC machine(s)
• Set Up Tooling for machine Monitor operation of the machine(s)
• Follow 5S principles in work area Perform tasks while following all safety protocols

• Above average math skills Attention to detail
• Demonstrated critical thinking Strong communication skills to handle complex machines and tools
• Education High School Diploma or Equivalent
• CNC certification or minimum 1-3 years’ experience operating CNC machinery

We are hiring structural welder-fitters for a GREAT client in Claremore!

Pay: $19-25+ depending on experience

Hours:  6a-3:30p – 40-50 hours per week

JOB DUTIES

• Welder must be able to pass a 3G MIG/FCAW. Must have a minimum of 2 years of experience welding structural steel and plate.
• Fitting ability is required.

• Steel toe
• MIG, fluxcore, metalcore - 2 years experience

ResourceMFG is hiring an INDUSTRIAL PAINTER for a great client at the Port of Catoosa!

Hours: 40 – 50 Per Week (6:00 AM – 4:30 PM Monday – Thursday, wt. Friday as needed)

Pay: $19.00 – $22.00 per hr. (Based on Experience)

JOB DUTIES

• Preparation (pressure wash cleaning, sanding, masking, rolling, etc.) and coatings application (brush, roll, spray) with epoxies and urethanes.
• Ability to adhere to the company’s policies, multitask, and conduct coatings operations safely under minimal supervision with maximal efficiency.
• Moderate forklift operation, minimal concrete work, and other tasks as required based on need.

• Minimum of two (2) years of experience in coatings operations within an industrial environment.
• Steel toe

Immediately Hiring!

Welder in Simi Valley, CA

• Pay: $20 – $23 DOE
• Hours: 4am – 12:30PM
• Schedule: Monday to Friday
• Overtime and Saturday required
• Temp to hire Opportunity

JOB SUMMARY: Under direct supervision can set up and operates gas and electric welding equipment used in the manufacturing of metal cabinets. Responsible for meeting safety, quality and productivity expectations.

ESSENTIAL FUNCTIONS:

• Under supervision, sets up and operates different types of equipment used to weld metal cabinets and other related products.
• Plans details of working procedure, tools, and material requirements.
• Welds sheet metal using different welding positions (flat, overhead, vertical, etc.).
• Cleans and prepares surfaces (including sanding) to be welded.
• Uses cutting torch equipment to dismantle assemblies and to cut material to size and shape.
• Builds up worn or defective surfaces.
• Keeps equipment and work area clean and orderly.
• Works from blueprint, engineering specifications and production schedules.
• Upon completion of welding operations, assists other areas as needed.

Technical Competencies:

• High school or equivalent education preferred.
• Must have 3 years or more of MIG Welding experience.
• Production welding with sheet metal experience preferred.
• Must demonstrate the capability of welding sheet metal products by passing welding test.
• Proficient in reading and understanding blueprints and engineering specifications.
• Basic reading, writing and numerical ability.
• Proficient in using measuring devices as required for product inspection.
• Available and willing to work extended hours and/or weekends as production demands dictates.
• Must be able to work with minimal supervision.

Manufacturer located in Moorpark, CA has a great opportunity for a Quality Inspector in the electronics industry. .

Pay:  25.00 – 30.00 DOE

Hours: morning shift
Schedule: 5/8 or 4/10 options available

Primary Duties and Responsibilities:
• Perform FIRST ARTICLE inspection for all level boards and record results.
• Perform INCOMING inspections for all level boards and components and record results
• Perform FINAL inspections of completed assemblies in accordance with procedures and
• requirements and record results
• Ensure accuracy of test equipment by checking against standards
• Review and sign company certifications as required
• Check returned/rejected material for status
• Perform random check of in-process jobs as necessary
• Maintain process and swiftness of department yields and accuracy
• Maintain quality records relating to all inspection activities
• Follow instructions with great care and precision

Benefits: 

1. Full Medical Insurance.
2. Dental and Vision Insurance.
3. Full time work.
4. 3 Sick Days
5. $100 Referral bonus

Education and/or experience:
• Knowledge of product, ISO process, IPC A610 Latest Revision, J-STD-01 Latest revision
• Experience with sampling techniques
• Experience with measuring equipment
• Ability to read and interpret assembly drawings and instructions
• General computer knowledge (locating & opening and updating files)
• MS Excel (enter info and format cells)
• Basic math skills
• Ability to Speak, Write, Read and understand English
• Good communications skills

Physical Requirements:
• Good Eyesight visual acuity test required periodically
• Ability to lift up to 50 lbs.

#nowhiring

Select Staffing has a great opportunity for a Maintenance Mechanic within manufacturing company in Simi Valley, CA.

Pay: $27.60 – 28.80 hr

Hours: 11AM – 9PM

Overtime and Saturdays are required

Monday to Friday

Temp to hire opportunity.

ESSENTIAL FUNCTIONS:

1. Performs maintenance duties, grounds and building maintenance and repair work.
2. Assists with the installation of electrical conduit, wiring, switching devices, controls, outlets, fixtures, motors, and other such equipment.
3. Assists with the testing and maintenance of equipment using instruments such as voltmeters, ohmmeters, pyrometers, and pressure gauges.
4. Performs skilled maintenance activities including construction, welding, brazing, soldering, and plumbing.
5. Utilizes a wide variety of hand and portable power tools.
6. Checks and repairs pumps, fans, valves, and motors.
7. Conducts preventative maintenance inspections and performs required preventative maintenance actions such as lubrication, cleaning, filter change and the like.
8. Assists in the movement of furniture, materials and equipment as required.
9. Reports needs for major repairs to Production Manager.
10. Responsible for the security of the building under the supervision of the Safety Manager.
11. Prepares accurate records for preventative maintenance.
12. Assists with the troubleshooting of equipment at the component level.

Benefits: 

1. Full Medical Insurance.
2. Dental and Vision Insurance.
3. Full time work.
4. 3 Sick Days
5. $100 Referral bonus

Technical Competencies:

• Minimum of five (5) years of related experience.
• Considerable knowledge of the occupational hazards and safety precautions of the trades involved.
• Skill in the care and use of tools and equipment used in the trades involved.
• Ability to detect defects in equipment and to make proper repairs or adjustments.
• Ability to interpret and work from pencil sketches and diagrams.

PHYSICAL/ENVIRONMENTAL REQUIREMENTS:

• Frequent standing, walking, carrying, stooping and crouching.
• Job involves standing most of the shift.
• Lift up to 40 lbs.

#nowhiring

ResourceMFG is hiring reliable and motivated individuals for an Order Picker position in Kalamazoo, MI!
This is a temp-to-hire opportunity for the right candidate.

?? Position: Order Picker (Cooler Environment)
?? Location: Kalamazoo, MI
?? Shift: 1st and 2nd shift available  
?? Pay: $20-22/hour

Saturday $3.00 extra per hour

Sunday $4.00 extra per hour 

Job Duties:
• Accurately pick and stage orders in a 35-degree cooler
• Operate stand-up forklift to move product as needed
• Work independently with minimal supervision
• Follow all safety and quality guidelines
• Maintain cleanliness and organization in the work area

Job Requirements:
• 1+ year of stand-up forklift experience required
• Clean background check
• Solid, verifiable work history
• Comfortable working in a cold environment for entire shift
• Ability to lift up to 50 lbs and stand/bend/move throughout shift
• Steel-toed boots required

Benefits of Working with ResourceMFG:
• Weekly pay
• Referral bonuses
• Free online courses for career development
• Opportunity for full-time hire with a great company

Ready to work in a fast-paced, team-focused environment? Apply today and start your next career move with ResourceMFG!