Factory and Manufacturing Jobs Hiring

Search our job openings

Results for -

Shipping Clerk

West Valley City, UT

Base Pay: 18.00 - 22.00

Shipping Clerk needed for a local manufacturer of medical devices, with experience in shipping, international shipping and customs. This is a temp to hire position …

Continue reading “Shipping Clerk”

Shipping Clerk needed for a local manufacturer of medical devices, with experience in shipping, international shipping and customs. This is a temp to hire position se to start right away.

Pay: $18-$22 per hour depending on experience

Shift: 8am-5pm Mon-Fri

Job Description:

  • Receive and process all incoming shipments and Inventory within 24 hours of arrival
  • Process all returns and put away
  • Inventory management; preform daily cycle counts, manage PIR and put away audits, Consolidate inventory
  • Customer service, helping customers with shipment inquiries
  • Investigate and resolve shipping discrepancies 
  • Clean and maintain workstation and warehouse

Job Requirements:

  • Attention to detail
  • experience with customs and international shipping 
  • Experience in Warehouse, shipping, and receiving is a MUST
  • Ability to be on your feet for the entire shift
  • Ability to lift up to 50lbs.
  • Computer skills
  • Ability to problem solve
  • Shipping software knowledge 

Apply now!

 

 

#PLXindeed

#PLXzip

Machine Operator

Canton, OH

Base Pay: 20.00 per HOUR

ResourceMFG now hiring 1st & 3rd shift machine operators in Canton, Ohio.  Pay: starting at $20.00+ Can go up based on experience  Shift: 3rd- 10pm-6am …

Continue reading “Machine Operator”

ResourceMFG now hiring 1st & 3rd shift machine operators in Canton, Ohio. 

Pay: starting at $20.00+ Can go up based on experience 

Shift:

3rd- 10pm-6am

Job requirements:

  • Experience in Machine Operating and manual set up of Machine process
  • Experience in a Manufacturing environment
  •  Ability to perform basic mathematical calculations and read a tape measure
  • Experience with manual and power tools

Job Requirements:

apply today, interview tomorrow

 

 

Warehouse Packer

Elgin, IL

Base Pay: 15.00 - 16.00

We’re Hiring Warehouse Packers in Elgin, IL area! Shifts Available: 1st-7am-3pm 2nd-3:30pm-11:30pm Pay Rate: $15-$16 with weekly pay!  Job Description: Packaging products  Label Quality Verification …

Continue reading “Warehouse Packer”

We’re Hiring Warehouse Packers in Elgin, IL area!

Shifts Available:

1st-7am-3pm

2nd-3:30pm-11:30pm

Pay Rate: $15-$16 with weekly pay!

 Job Description:

  • Packaging products 
  • Label
  • Quality Verification of products 
  • Palletize Products
  • Maintain clean area  
  • Clean and Sanitize Equipment
  • Maintain records of cleaning dates
  • Other duties as assigned

We also offer unlimited $100 referral bonuses, free online courses and more!

Don’t wait apply now!

This position includes the opportunity to enroll in Medical, Dental, Vision, Term Life, and
Short-Term Disability benefits, as well as a Retirement Plan. All Illinois talent are also
entitled to accrue and use paid time off. Additional benefits information can be found
here: https://www.resourcemfg.com/employees/benefits/

 

#nowhiring

 

Job Requirements:

  • Team Player
  • Reliable 
  • Lift up to 50 pounds
  • Must be able to stand for 8hrs
  • Ability to follow cleaning procedures
  • EPJ experience preferred but not required

 #nowhiring

Janitorial

Tucson, AZ

Base Pay: 15.00 per HOUR

NOW HIRING CUSTODIAL STAFF (BUS ROUTE FRIENDLY)!NO EXPERIENCE NEEDEDJOIN OUR TEAM IN TUCSON!!! Pay Rate: $15.00/hourDates & times worked to be determined based on need …

Continue reading “Janitorial”

NOW HIRING CUSTODIAL STAFF (BUS ROUTE FRIENDLY)!
NO EXPERIENCE NEEDED
JOIN OUR TEAM IN TUCSON!!!

Pay Rate: $15.00/hour
Dates & times worked to be determined based on need

At ResourceMFG We Offer You:

  • Weekly pay (Direct Deposit or ATM Debit Card available)
  • Access to health benefits and retirement plan
  • A personal recruiter to help with job searches and assistance when at work!
  • FREE ONLINE skills training
Core Cleaning Tasks:
    • Floor Maintenance: Sweeping, mopping, scrubbing, and vacuuming floors. 
       
    • Surface Cleaning: Dusting and polishing furniture, counters, and other surfaces. 
       
    • Restroom Cleaning: Cleaning and sanitizing restrooms, including toilets, sinks, and floors. 
       
    • Trash Removal: Emptying trash cans and recycling bins and disposing of waste properly. 
       
 
 

Job Requirements:

Job Responsilbities:

  • Follow safety guidelines
  • Follow standard work instructions as assigned
  • Perform hands-on tasks
  • Stand, bend, and reach

Assembly Production Worker

Osceola, AR

Base Pay: 16.16 per HOUR

Manufacturing Job Now Available! Production Associate 1st Shift  Work in a team environment Join a great team and get started in a new career. Support …

Continue reading “Assembly Production Worker”

Manufacturing Job Now Available! Production Associate 1st Shift 

Work in a team environment

Join a great team and get started in a new career.

Support floor operations with minimal supervision.

Assembly and packing

Bi-Weekly Pay

 

#nowhiring

Hiring Immediately Warehouse Associates

Fenton, MO

Base Pay: 14.30 - 14.50

Immediate Openings for Entry Level Warehouse Associates in Fenton! Great long term opportunities with career and growth potential Multiple Shifts Available! Warehouse Associate Job Duties …

Continue reading “Hiring Immediately Warehouse Associates”

Immediate Openings for Entry Level Warehouse Associates in Fenton!

Great long term opportunities with career and growth potential

Multiple Shifts Available!

Warehouse Associate Job Duties include but not limited to:

  • Packing materials
  • Picking orders
  • Keeping a clean work station and area
  • Assembling product
  • Following instructions
  • Feeding raw materials into machines
  • Other duties as assigned

ResourceMFG offers:

  • Weekly pay
  • Benefits for all associates
  • Free online courses

#nowhiring

 

Job Requirements:

Ability to work with computers

Ability to stand, walk, bend, stoop for 8+ hours

 #nowhiring

Immediate Openings – Production Worker

Union, MO

Base Pay: 17.41 - 18.41

Now Hiring for Production Workers! Long term career potential with growth! 12 hour rotating shift- 2 weekends a month Job duties include: Working on production …

Continue reading “Immediate Openings – Production Worker”

Now Hiring for Production Workers!

Long term career potential with growth!

12 hour rotating shift- 2 weekends a month

Job duties include:

  • Working on production line
  • Feeding raw material into machines
  • Checking for quality
  • Packing product for shipment
  • Discarding unusable product/plastic in grinding machines
  • Keeping a clean work area
  • Other duties as assigned

We offer:

  • Weekly pay
  • Benefits
  • Free online courses to further your career
  • No screening costs!

Don’t wait apply today!

#nowhiring

Job Requirements:

  • Previous experience in warehouse setting
  • Ability to stand for 12 hour shift
  • Ability to bend/stoop/lift/twist and perform repetitive motions
  • Commitment to attendance and punctuality
  • Ability to follow GMPs
  • Ability to work in hot environment

#nowhiring

 

Assembler

Albuquerque, NM

Base Pay: 17.50 - 18.00

Apply Now. Assembly WorkerEvening and Night Shifts Available  Earn Good Pay & Benefits. Work with Great People. Employbridge is hiring Assembly workers in ABQ! These are …

Continue reading “Assembler”

Apply Now. 
Assembly Worker
Evening and Night Shifts Available 

Earn Good Pay & Benefits. Work with Great People.

Employbridge is hiring Assembly workers in ABQ! These are entry level assembly positions, with paid on-the-job training. Assemble parts that provide power and electricity all over the USA.

  • Full time:
    • 2nd: M-F, 3:15pm-11:45pm, $17.50/hour
    • 3rd: Sun-Thurs, 11:15pm -7:45am, $18/hour
  • Weekly Pay & Benefits available 

Assembly duties:

  • Perform quality work within deadlines.
  • Interact professionally with employees.
  • Work effectively as a team contributor.
  • Use the proper hand tools and equipment to assemble product.
  • Ensure standard operating procedures and processes are followed.
  • Ensure quality standards are met.
  • Follow all company safety policies to ensure a safe working environment.

Job Requirements:

 

  • Ability to perform basic math, read, and understand measurements.
  • Ability to read and understand part, component, and job instructions.
  • Ability to create and maintain records.
  • Excellent communication skills (verbal, written, listening).
  • Must be able to lift 40lbs. 
  • Must be able to perform physical tasks and stand for extended periods of time.
  • Must have high school diploma or GED, documentation required for verification.  
  • Steel toe shoes.

Mechanic

Ghent, KY

Base Pay: 23.50 per HOUR

Maintenance Mechanics looking for a new career?   We have the right job for you! Job Description:  Conduct maintenance of equipment  Assembly and disassembly of equipment …

Continue reading “Mechanic”

Maintenance Mechanics looking for a new career?  

We have the right job for you!

Job Description: 

  • Conduct maintenance of equipment 
  • Assembly and disassembly of equipment
  • Remove and replace defective parts
  • Ability to read instructions
  • Ability to use and read measuring equipment 

Benefits: 

  • Weekly Pay
  • Referral Bonus
  • Great work environment
  • Supportive leadership
  • Medical, vision, and dental insurance available

 

Job Requirements:

Job Requirements:

  • Must have a valid driver license
  • Use hand tools and power tools
  • Steel toe shoes/boots
  • Meet overtime schedule 

CNC Lathe and Mill Operator – 2nd shift – 3P-11P

Fraser, MI

Base Pay: 28.00 per HOUR

Job Title: CNC Lathe and Mill Operator Location: Fraser, MI Shift: 2nd 3PM – 11PM Job Type: Full Time Direct Hire Pay: $22.00 – $28.00 …

Continue reading “CNC Lathe and Mill Operator – 2nd shift – 3P-11P”

Job Title: CNC Lathe and Mill Operator

Location: Fraser, MI

Shift: 2nd 3PM – 11PM

Job Type: Full Time Direct Hire

Pay: $22.00 – $28.00 per hour depending on experience

Job Description: We are seeking experienced CNC Lathe and Mill operators to join our team in Fraser, employer has been in business for 40 years with low turnover, providing a stable and supportive work environment.. The ideal candidates must have years of experience, job longevity and will be responsible for setting up, editing, running, offsetting, and inspecting close tolerance small parts.

Requirements:

  • Minimum of 3 years of experience with CNC Lathes (Mazak with live tooling is a plus) and CNC Mill Fadal.
  • Set up
  • Experience in close tolerance automotive and aerospace work.
  • Reliable and conscientious.
  • Willingness to work overtime.

If you would like to be considered, please email resumes to [email protected], we look forward to hearing from you.

Machine operator

Madison, IN

Base Pay: 18.69 per HOUR

NOW HIRING! In the Madison, IN area for the auto industry. Assembly associates, warehouse department, and machine operators.  Job Description:  Assembly of automotive parts Machine …

Continue reading “Machine operator”

NOW HIRING!

In the Madison, IN area for the auto industry. Assembly associates, warehouse department, and machine operators. 

Job Description: 

  • Assembly of automotive parts
  • Machine operators
  • Sorting and packing
  • Loading and unloading materials

Shifts:

  • 1st shift 5:00am – 1:30 pm with daily overtime
  • 2nd shift 6:00 pm – 2:30 am with daily overtime

Benefits: 

  • Conversion after 480 hours
  • Weekly pay
  • Referral Bonus
  • Medical, Dental, and vision insurance available 

Job Requirements:

Job Requirements:

  • Ability to work overtime on a daily basis.
  • Operate multiple machines
  • Lifting, bending, and standing for long periods of time. 
  • Steel Toe shoes/boots required

Forklift Operator

Elgin, IL

Base Pay: 18.00 per HOUR

Immediate Openings for 1st and 2nd shift Material Handlers in the Elgin, IL area ! 1st shift: 7am-3:30pm $17-$18 2nd shift: 4pm-12:30am $18  Responsibilities:  Safely …

Continue reading “Forklift Operator”

Immediate Openings for 1st and 2nd shift Material Handlers in the Elgin, IL area !

1st shift: 7am-3:30pm $17-$18

2nd shift: 4pm-12:30am $18

 Responsibilities: 

  • Safely operate Walkie Rider and sit down forklift.  
  • Load and unload materials as needed.  
  • Maintain organization of inventory and materials.  
  • Follow safety protocols and ensure a clean work environment
  • Other duties as assigned

We offer:

  • Weekly pay
  • Benefits for all associates 
  • Free online courses to further your career
  • Direct deposit or pay card
  • Unlimited $100 referral bonuses

This position includes the opportunity to enroll in Medical, Dental, Vision, Term Life, and
Short-Term Disability benefits, as well as a Retirement Plan. All Illinois talent are also
entitled to accrue and use paid time off. Additional benefits information can be found
here: https://www.resourcemfg.com/employees/benefits/

Apply now!

#nowhiring

 

 

Job Requirements:

Previous experience operating electric pallet jacks and forklifts is required.  

Ability to work efficiently in a fast-paced environment.  

Strong attention to detail and safety.

 

 #nowhiring

CNC Machinist

Romeo, MI

Base Pay: 25.00 per HOUR

Job Title: CNC Machinist Shifts: Day Shift:  6am – 5:30pm (Mon – Fri), 6am – noon (occasionally Sat) Night Shift: 5pm – 6am (Mon-Thurs) 4 …

Continue reading “CNC Machinist”

Job Title: CNC Machinist

Shifts:

  • Day Shift:  6am – 5:30pm (Mon – Fri), 6am – noon (occasionally Sat)
  • Night Shift: 5pm – 6am (Mon-Thurs) 4 – 13 hour shifts

Location: Romeo, MI

Pay Rate: $20-$30 per hour

Contract-to-Hire

ResourmceMFG is seeking a skilled CNC Machinist to join our team in Romeo, MI The ideal candidate will have experience operating CNC machines, a strong attention to detail, and a commitment to producing high-quality work.

Responsibilities:

  • Set up and operate CNC machines to perform precision machining operations.
  • Read and interpret blueprints, technical drawings, and specifications.
  • Inspect and measure finished products to ensure they meet specifications.
  • Perform routine maintenance on machines and equipment.
  • Troubleshoot and resolve issues with machines and processes.
  • Maintain a clean and organized work area.
  • Follow all safety protocols and procedures.

Qualifications:

  • High school diploma or equivalent
  • At least 3 years recent experience as a CNC Machinist
  • Candidate will need to provide their own tools
  • Ability to read and interpret blueprints and technical drawings
  • Strong attention to detail and problem-solving skills
  • Ability to work independently and as part of a team
  • Good communication skills
  • Physical ability to stand for long periods and lift up to 50 pounds.

 

Immediate Openings Production Workers

Union, MO

Base Pay: 17.41 - 18.41

Immediate Openings for Production Workers in Union, MO Long term career with potential for growth! Weekly pay and benefits! 12 hour rotating schedule Job duties: …

Continue reading “Immediate Openings Production Workers”

Immediate Openings for Production Workers in Union, MO

Long term career with potential for growth!

Weekly pay and benefits!

12 hour rotating schedule

Job duties:

  • Packing product for shipment
  • Feeding raw materials into machines
  • Checking for visual quality
  • Assisting machine operators
  • Working multiple stations
  • Other duties as assigned

Don’t wait apply today!

#nowhiring

Job Requirements:

Ability to follow GMPs (hair nets, gloves, no jewelry etc.)

Ability to work in hot environment

Ability to stand, bend, twist, stoop, perform repetitive motion for entire shift

#nowhiring

Quality Inspector

carson, CA

Base Pay: 19.00 per HOUR

Hiring Now!Quality Inspector1st Shift The Best Manufacturing Jobs. Start with ResourceMFG. Quit looking for manufacturing jobs near me! ResourceMFG is hiring an experienced Quality Inspector at a …

Continue reading “Quality Inspector”

Hiring Now!
Quality Inspector
1st Shift


The Best Manufacturing Jobs. Start with ResourceMFG.

Quit looking for manufacturing jobs near me! ResourceMFG is hiring an experienced Quality Inspector at a popular local manufacturer. You’ll get good pay, solid benefits and cool perks like free online training to improve your skills. Don’t miss out on this awesome chance!

Experience first-hand why ResourceMFG earned ClearlyRated’s Best of Staffing® Talent Award for providing superior service to job seekers. APPLY TODAY!

“Every time I have a question or problem the ResourceMFG recruiter always helps me!” ResourceMFG Associate, Marissa

We Require Our Customers to Offer:

  • Safe and clean work environment
  • Employee focused workplace
  • Safety programs and training

As a ResourceMFG Quality Inspector We Offer You:

  • Competitive pay
  • Paid weekly (Direct Deposit or ATM Debit Card available)
  • Access to health benefits and retirement plan
  • A personal recruiter to help with job searches and assistance when at work!
  • Great for people who want to learn and start a career in manufacturing
  • FREE ONLINE skills training

Job Requirements

  • Trainable job opportunity where experience is not required
  • Attention to detail
  • Able to read ruler/tape measure or other quality tools
  • Utilizing WMS

Job Responsibilities

  • Follow safety guidelines
  • Follow standard work instructions as assigned
  • Perform hands-on tasks
  • Lift up to 50lbs, stand, bend, and reach
  • Maintain clean and organized workspace
  • Identify and resolve problems concerning equipment and materials
  • Ensure product meets customer specifications
  • Meet production standards
  • Work in a team environment
  • Accurate recordkeeping and quality documentation
  • Inspection of product
  • Execute value added service such as inspection and physical check of the transformer.

     

  • Check engineering condition of the transformer with the check list.

     

  • Supervise and monitor site operation in warehouse

     

  • Data inputting and retrieving information by utilizing WMS

     

  • Report irregularity and make troubleshooting

     

Working for ResourceMFG

If you’re looking for a job in manufacturing, ResourceMFG specializes in you! We are America’s largest staffing company with over 30 years in business, putting more than 24,000 people to work nationwide, each week. A company that treats you like family, we’re committed to providing equal opportunities to all, a healthy and safe work environment, fair pay and the tools to succeed and grow.

Motor Vehicle Assembler

Huntsville, AL

Base Pay: 15.50 per HOUR

LOOKING FOR A NEW CAREER?   Try Automotive Manufacturing! No Experience Required! We have positions opening in Madison, AL with the leading Automotive manufacturer VUTEQ. …

Continue reading “Motor Vehicle Assembler”

LOOKING FOR A NEW CAREER?

 

Try Automotive Manufacturing! No Experience Required!

We have positions opening in Madison, AL with the leading Automotive manufacturer VUTEQ. We are looking for hard working individuals who are excited about jump starting their careers in the Automotive Manufacturing field. Complete an application and speak with a Recruiter about joining the team Today!

 

Starting Pay: $14.50- $15.50+ $1 hourly Attendance bonus!

Vuteq Perks 

  • Onsite Cafeteria  
  • 45-minute Lunch break 
  • Permanente conversion Opportunity with pay increase and quarterly bonuses

 

Available Shifts: Monday- Friday 8-hour shifts with occasional overtime

Morning 7:00 am- 3:45 pm 

Nights 7:00 pm- 3:45 am  

We Require Our Customers to Offer:

  • Safe and clean work environment
  • Employee focused workplace
  • Safety programs and training

ResourceMFG Offers You:

  • Competitive pay
  • Paid weekly (Direct Deposit or ATM Debit Card available)
  • Access to health benefits and retirement plan
  • A personal recruiter to help with job searches and assistance when at work!
  • FREE ONLINE skills training

Job Requirements

  • Attention to detail
  • Able to use basic hand and power tools
  • Basic Math
  • Mechanical aptitude
  • Experience reading blueprints/drawings is a plus
  • Hand and eye coordination and dexterity
  • Basic computer skills

Job Responsibilities

  • Follow safety guidelines
  • Follow standard work instructions as assigned
  • Perform hands-on tasks
  • Lift up to 50lbs, stand, bend, and reach
  • Maintain clean and organized workspace
  • Troubleshoot issues
  • Meet production standards
  • Work in a team environment
  • Accurate recordkeeping and inventory documentation
  • Inspection of product
  • Experience with electronic assembly, a plus

 

WHY RESOURCEMFG?

Working for ResourceMFG If you’re looking for a job in manufacturing, ResourceMFG specializes in you! We are America’s largest staffing company with over 30 years in business, putting more than 24,000 people to work nationwide, each week. A company that treats you like family, we’re committed to providing equal opportunities to all, a healthy and safe work environment, fair pay and the tools to succeed and grow.

 

Assembler

Clearfield, UT

Base Pay: 22.00 per HOUR

Now Hiring Assemblers in the Clearfield Area  Pay $22/hour Shift 7am to 4:30pm Monday – Friday  Assembler Job Duties Preforming bench-type processes to complete mechanical and …

Continue reading “Assembler”

Now Hiring Assemblers in the Clearfield Area 

Pay $22/hour

Shift 7am to 4:30pm Monday – Friday 

Assembler Job Duties

  • Preforming bench-type processes to complete mechanical and electrical assemblies and subassemblies, using hand and electronic tooling 
  • reporting defective materials or questionable conditions to the department supervisor
  • perform any assembly-type functions, using hand or power tools
  • Preform body work on conveyor belts
  • Operating Forklifts as required
  • Operate automatic fastener machines, sanders and drills to perform work on conveyors or other assemblies 

Benefits

  • Weekly Pay
  • Hiring Immediately
  • Health Insurance once hired

Apply Today!

 

Job Requirements:

 

  • 3 years related experience 
  • Strong Attention to detail 
  • Ability to use hand tools Pneumatic tools 
  • Able to lift 50 lbs.

#RMFGINDEED

Machine Operator

STEELE, AL

Base Pay: 18.25 - 18.50

Immediately Hiring Experienced Machine Operators 2nd & 3rd  Shifts Available Why work for ResourceMFG? Temp-to-Hire with clear career growth goals Detailed training matrix Full time …

Continue reading “Machine Operator”

Immediately Hiring Experienced Machine Operators

2nd & 3rd  Shifts Available

Why work for ResourceMFG?

  • Temp-to-Hire with clear career growth goals
  • Detailed training matrix
  • Full time position!  40 hours per week
  • Access to health insurance on day one of work
  • 8 hour shifts each day
  • Weekends off! 

What does working as a Machine Operator involve?
Continuous manufacturing Process that involves transforming raw plastic materials through extruders, coiling, and adding components.  Equipment must remain operational without shutdowns.

Responsibilities: 

  • Inspecting coils based on quality standards.
  • Ensuring product meets customer specification.
  • Packing approved products onto pallets
  • Troubleshooting machinery issues
  • Performing autonomous maintenance on the coiler
  • Conducting lab checks every 45 minutes.
  • Must be able to understand and communicate with all employees to receive training instruction and perform responsibilities.
  • Must learn to follow quality control specs and procedures. 
  • Maintain a clean and orderly work area.
  • Perform testing as required.
  • Must comply with safety regulations for the protection of self and fellow workers.
  • Perform other duties as assigned by management.

 Experience Required:

  • One year of experience in a manufacturing setting required 

Shifts Available:

  • 2nd Shift: Mon-Fri – 3:00pm to 11:30pm @ $18.25 per hour 
  • 3rd Shift: Sun –Thur – 11:00pm to 7:30am @ $18.50 per hour

Don’t miss out on this great opportunity! 

#nowhiring

Laboratory Technician

Mitchell, IN

Base Pay: 31.00 per HOUR

Pay: $31.00 per hour  Shift: 1st shift on rotating schedule including nights. The schedule does include weekends and holiday’s.  Job Description This an opportunity for …

Continue reading “Laboratory Technician”

Pay: $31.00 per hour 

Shift: 1st shift on rotating schedule including nights. The schedule does include weekends and holiday’s. 

Job Description

This an opportunity for a motivated individual to play an integral role for the quality of material inputs and output of final product in a state of the art cement manufacturing facility.  The Lab Technician reports to the Quality Control Supervisor.  The job responsibilities and functions include but are not limited to the following:

  • Ensure sample integrity and properly collect, identify, prepare and homogenize and store all samples
  • Collect, record, store, analyze and distribute information concerning quality control results
  • Communicate all appropriate results, information and problems to the appropriate supervisors, foremen and plant associates
  • Monitor the quality of the quarried materials through the appropriate testing
  • Control the quality of the raw mill production by performing the appropriate tests and making any necessary changes to maintain the posted targets
  • Control the quality of the finish mill production by performing the appropriate tests and making any necessary changes to maintain the posted targets
  • Control the quality of the kiln production by performing the appropriate testing
  • Perform testing that will enhance the production rate or quality of all plant operations
  • Learn the procedure for the making of glass pellets
  • Insure all plant production meets the specifications of the company, the plant and the customer by performing appropriate testing
  • Perform tests to resolve customer complaints and meet customer needs
  • Assist in the development of new products
  • Monitor all laboratory equipment and plant equipment for proper operation and report any deviations to the proper personnel
  • Keep the department and associated equipment clean
  • Perform tests to determine the quality of fuels
  • Determine the quality of purchased materials by performing the appropriate tests
  • Perform wet chemistry when required
  • Perform all physical testing duties
  • Perform production and inventory record keeping duties
  • Participate in the plant microscopy program
  • Complete assigned work and be in compliance with all federal, state and local regulatory requirements.
  • Complete work in a safe manner and adhere to all safety policies and procedures.

Outstanding Benefits Available:

  • Potential for career growth. This is a Performance to Hire position.
  • Weekly Pay with Direct Deposit options
  • Medical, Dental, Vision, AD&D available

 

Job Requirements:

HERE’S WHAT WE’RE LOOKING FOR:

  • 2 year degree in Chemistry or similar technical degree beneficial but not required.
  • 2 years of lab experience in cement testing preferred Basic knowledge of lab equipment
  • Must be capable of lifting a bag of cement from the floor to the workbench (Type I bag = 94 pounds)
  • Must be able to work weekends and or Holidays for laboratory coverage
  • Excellent interpersonal, oral and written communications skills
  • This is not a remote position. The ideal candidate lives within 15 minutes of Mitchell, IN. 
  • Physical Requirements:  sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 50 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment.

CNC Machinist/Programmer

Almont, MI

Base Pay: 22.00 - 26.00

ResourceMFG is working with a local metal shop searching for an experienced CNC programmer and machinist located in Almont MI This is a Temp to …

Continue reading “CNC Machinist/Programmer”

ResourceMFG is working with a local metal shop searching for an experienced CNC programmer and machinist located in Almont MI

This is a Temp to Hire opportunity 

6am-4:30pm

Wage based on experience: $22-26

Job Summary:

The CNC Machinist position is responsible for operating various CNC machines to fabricate and manufacture parts.

Duties/Responsibilities:

  • Operates Fadal and Haas CNC Machines.
  • Ability to operate and set up Bridgeport Machines.  
  • Calculates dimensions and tolerances using knowledge of mathematics and instruments.
  • Ability to read calipers, micrometers, depth gauges, protractor, and other various pieces of inspection equipment.
  • Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines.
  • Reads and interprets blueprints and design sketches in both Metric and US measuring systems to ensure proper dimensions and specifications for parts.
  • Operates various types of machine tools to perform progressive machining.
  • Converts metric and standard dimensions.
  • Measures, examines and tests completed units to detect defects and ensure conformance to specifications; adjusts machine controls to resolve production errors.
  • Detects malfunctions or out-of-tolerance machining and adjusts machine controls, as necessary.
  • Checks parts to ensure they are meeting the company’s standards before moving to the next department.
  • Understands tolerancing and how to hold different tolerances.
  • Inspects machinery for any needed repairs; perform minor repairs within expertise.
  • Maintains cleanliness and safety of work area.
  • Follows company, state, and federal safety regulations. This includes wearing proper protective equipment and keeping work area clean and well-organized.

Performs other related duties as assigned.

Job Requirements:

Required Skills/Abilities:

  • Ability to pay attention to detail and ensure job is done to the highest quality.
  • Ability to act with integrity, professionalism, and confidentiality.
  • Knowledge of tooling and software to run machine.
  • Ability to operate various types of machine tools to perform machining tasks.
  • Sheet metal and/or steel fabrication experience.
  • Ability to read and interpret blueprints, documents, safety rules, operating and maintenance instructions and procedure manuals.
  • Work with hands, lifting and moving large pieces of metal, standing for hours at a time.
  • Ability to follow verbal and written instructions.
  • Strong analytical skills to monitor work processes, inspect various types of metal, read and interpret blueprints that contain precise measurements, and to make calculations necessary to cut metal to match specific designs.
  • Excellent communication skills to work in a collaborative environment with other team members.
  • Strong measuring skills working with multiple measuring tools to make precise measurements using metric and US measuring systems.
  • Excellent time management skills with a proven ability to meet deadlines and ability to look ahead to upcoming jobs while running current job.

 

Education and Experience:

High School Diploma or equivalent required.

Preferred minimum of 2-year related experience.  

Vocational or technical school training and apprenticeship preferred.

Lathe experience preferred.

Material Handler/Stand-Up Forklift

Florence, KY

Base Pay: 20.50 per HOUR

NOW HIRING Material Handler/Stand-Up Forklift in Florence, KY! Shifts available: 2nd shift – Monday-Friday 3:00pm-11:30pm $20.50 3rd shift – Monday-Friday 11:00pm-7:30am $20.50 Material Handler is …

Continue reading “Material Handler/Stand-Up Forklift”

NOW HIRING Material Handler/Stand-Up Forklift in Florence, KY!

Shifts available:

2nd shift – Monday-Friday 3:00pm-11:30pm $20.50

3rd shift – Monday-Friday 11:00pm-7:30am $20.50

Material Handler is a worker responsible for operating Stand up and Turret Truck to safely lift, move, and position materials within a warehouse or production facility, typically utilizing specialized attachments to handle various types of loads while adhering to strict safety protocols and following work orders to ensure efficient material flow.

Primary Responsibilities:

Operating various types of forklifts (Stand-up, reach truck and Turret Truck) to move pallets throughout the warehouse.
Loading and unloading trucks efficiently.
Accurately picking and placing inventory in designated storage locations.
Verifying product quantity and quality against shipping documents.
Maintaining proper stock rotation.
Performing daily forklift inspections and reporting any maintenance issues

Job Requirements:

What you need to succeed (Qualifications, experience, skills, attributes)

  • Generally prefer 6 months -2 years experience on stand up and Turret Truck
  • 7 year clean background
  • Good work ethic and behavior
  • Pass a drug screen urinalysis
  • Be able to lift 40lbs
  • Ability to adhere to a strict attendance policy

Don't wait - APPLY NOW!!

Inventory – Weekend Shift

Florence, KY

Base Pay: 22.78 per HOUR

ResourceMFG in Florence, KY is hiring for Weekend Shift Cycle Counters! Inventory Control/QA Specialist in Florence  Shifts: Saturday & Sunday 7:00am-7:30pm $22.78/hr.        …

Continue reading “Inventory – Weekend Shift”

ResourceMFG in Florence, KY is hiring for Weekend Shift Cycle Counters!

Inventory Control/QA Specialist in Florence

 Shifts: Saturday & Sunday 7:00am-7:30pm $22.78/hr. 

             Saturday & Sunday 7:00pm-7:30am $22.78/hr. 

Come be a part of a global logistics network that connects the world. A network that allows you to shape your career by encouraging you to contribute and truly make a difference. With more than 76,000 colleagues worldwide, we welcome diversity and thrive on individual backgrounds, perspectives and skills.

Schedule: 

  • Located in Florence, KY
  • Resume and Interview Required
  • Background screen required
  • Previous experience within a warehouse setting required

Join Our Team and Receive AWESOME Benefits: 

  • Weekly Pay – Get paid EVERY Friday!!!
  • SAFE and clean warehouse environment
  • FREE online certifications through Penn Foster

Job Duties: 

  • Monitor and control inventory integrity.
  • Maintain product identification program.
  • Research inventory discrepancies; make necessary corrections.
  • Log and control aged product.
  • Monitor stock counts and physical inventory; reconcile.
  • Determine daily tasks, workloads and coordinates staffing accordingly in conjunction with inventory supervisor.

Job Requirements:

  • High school diploma or equivalent required.
  • Generally, prefer 2-4 years of related inventory experience.
  • Good interpersonal, analytical, problem-solving, and communication skills required.
  • Must be able to operate a variety of equipment such as a computer, and have strong organizational, inventory, and accounting skills.
  • Consistently lift up to sixty pounds in standing, bending, and rotating motions; operate forklift; and in some cases, perform tasks in inclement weather conditions.
  • Resume and Interview Required
  • Background Screen required
  • Must have Cherry picker, Reach truck and turret truck experience

 

Don't wait - apply now!

 

Shipping Clerk

Pacific, MO

Base Pay: 18.00 per HOUR

Now Hiring for Forklift Operators in Pacific, MO! 4 ten hour days!  2nd shift – 4:00pm to 2:30amam Monday through Thursday $18 an hour Job …

Continue reading “Shipping Clerk”

Now Hiring for Forklift Operators in Pacific, MO!

4 ten hour days! 

2nd shift – 4:00pm to 2:30amam Monday through Thursday

$18 an hour

Job duties:

  • Picking orders
  • Safely operating high rise picker
  • Staging orders
  • Packing orders
  • Keeping clean work station
  • Other duties as assigned in warehouse

ResourceMFG offers:

  • Weekly pay
  • Benefits
  • Free online courses to further your career
  • Direct Deposit or Pay Card 
  • $100 Referral Bonuses

Apply today!

#nowhiring

Job Requirements:

  • Previous cherry picker or forklift experience
  • Cannot be afraid of heights- must be able operate high rise pickers
  • Ability to follow direction
  • Commitment to attendance and safety
  • Ability to lift up to 50lbs
  • Ability to work on and off the lift

#nowhiring

Sanitation

Fullerton, CA

Base Pay: 20.00 per HOUR

HIRING NOW!Sanitation2nd Shift Great Pay. Good Benefits. Committed to Safety. Fullerton, CA Schedule: 4:30pm-12am Pay Rate: $20/ hour Temp, Temp to Hire   We Require …

Continue reading “Sanitation”

HIRING NOW!
Sanitation
2nd Shift

Great Pay. Good Benefits. Committed to Safety.

  • Fullerton, CA
  • Schedule: 4:30pm-12am
  • Pay Rate: $20/ hour
  • Temp, Temp to Hire

 

We Require Our Customers to Offer:

  • Safe and clean work environment
  • Employee focused workplace
  • Safety programs and training

At Select We Offer You:

  • Competitive pay
  • Paid weekly (Direct Deposit or ATM Debit Card available)
  • Access to health benefits and retirement plan
  • A personal recruiter to help with job searches and assistance when at work!
  • FREE ONLINE skills training
Job Summary:
 
A Sanitation Second Shift position involves cleaning and sanitizing equipment, machinery, and facilities. This includes tasks like cleaning floors, walls, pipes, and ductwork, as well as disinfecting surfaces and ensuring food safety. The role also involves following established procedures, using cleaning chemicals, and maintaining records of sanitation activities. 

 
Key Responsibilities:
  • Cleaning and Sanitization:
    Thoroughly cleaning and sanitizing all areas and equipment assigned, including production machinery, floors, walls, and other surfaces. 

     
  • Chemical Handling:
    Safely handling and using cleaning and sanitizing chemicals according to safety protocols and instructions. 

     
  • Equipment Maintenance:
    Disassembling and reassembling production equipment for cleaning purposes, and ensuring proper cleaning and sanitation of equipment, including CIP (Clean in Place) procedures. 

     
  • Documentation:
    Accurately completing sanitation daily documentation, such as checklists and records. 

     
  • Food Safety:
    Ensuring compliance with food safety regulations, including adhering to Good Manufacturing Practices (GMPs). 

     
  • Safety Compliance:
    Adhering to all safety guidelines, including lockout/tag out procedures, proper lifting techniques, and PPE (Personal Protective Equipment) usage. 

     
  • Communication:
    Communicating with supervisors and team members about any sanitation concerns or issues. 

     
  • Shift Work:
    Working a second shift, typically from 4 p.m. to midnight or 3 p.m. to 11 p.m., as outlined in job descriptions. 

     

Job Requirements:

Qualifications:

  • Experience: Experience in a food, safety, or sanitation industry is often preferred. 
  • Attention to Detail: Strong attention to detail and a commitment to workplace safety are essential. 
     
  • Communication Skills: The ability to communicate effectively with supervisors and team members. 
     
  • Physical Stamina: The ability to stand and walk for extended periods, lift and carry items, and perform repetitive tasks. 
     
 
 

Electrical Technician

West Chester, OH

Base Pay: 25.50 per HOUR

Employbridge is currently seeking Electrical Technician’s Candidates to work at a company ranked #1 as the world’s most sustainable companies. The position is in West …

Continue reading “Electrical Technician”

Employbridge is currently seeking Electrical Technician’s Candidates to work at a company ranked #1 as the world’s most sustainable companies. The position is in West Chester, Ohio with a payrate starting at $25.50/hr. 

 

Shift Details: 

  • 1st Shift: 5am-5:30pm Thursday-Saturday 

 

Electrical Tech responsibilities include but are not limited to:

  • Installs, repairs, and maintains the electrical parts of industrial equipment.
  • Works individually or as part of a team to successfully complete projects.
  • Follows safety procedures and adheres to electrical codes.
  • Correctly interprets technical documents for proper execution of assignments.
  • Conducts quality assurance measures and inspections.

 

Job Requirements:

  • High school diploma or equivalent
  • Associate degree in a related field or equivalent experience is required for some positions.
  • Certificate of completion in an apprenticeship program, or journeyman experience
  • Knowledgeable in pertinent electrical codes and regulations
  • Able to understand schematics and other technical documents.
  • Must be able to handle physically demanding tasks.

 

#nowhiring

Material Handler/Stand-Up Forklift Operator

Florence, KY

Base Pay: 20.50 per HOUR

NOW HIRING Material Handler/Stand-Up Forklift Operator in Florence, KY! Shifts available: 2nd shift – Monday-Friday 3:00pm-11:30pm $20.50 3rd shift – Monday-Friday 11:00pm-7:30am $20.50 Material Handler …

Continue reading “Material Handler/Stand-Up Forklift Operator”

NOW HIRING Material Handler/Stand-Up Forklift Operator in Florence, KY!

Shifts available:

2nd shift – Monday-Friday 3:00pm-11:30pm $20.50

3rd shift – Monday-Friday 11:00pm-7:30am $20.50

Material Handler is a worker responsible for operating Stand up and Turret Truck to safely lift, move, and position materials within a warehouse or production facility, typically utilizing specialized attachments to handle various types of loads while adhering to strict safety protocols and following work orders to ensure efficient material flow.

Primary Responsibilities:

Operating various types of forklifts (Stand-up, reach truck and Turret Truck) to move pallets throughout the warehouse.
Loading and unloading trucks efficiently.
Accurately picking and placing inventory in designated storage locations.
Verifying product quantity and quality against shipping documents.
Maintaining proper stock rotation.
Performing daily forklift inspections and reporting any maintenance issues

Job Requirements:

What you need to succeed (Qualifications, experience, skills, attributes)

  • Generally prefer 6 months -2 years experience on stand up and Turret Truck
  • 7 year clean background
  • Good work ethic and behavior
  • Pass a drug screen urinalysis
  • Be able to lift 40lbs
  • Ability to adhere to a strict attendance policy

Don't wait - APPLY NOW!!

Assembly

Livingston, TN

Base Pay: 14.00 per HOUR

Entry Level, Manufacturing Production Assemblers, Manufacture and assemble automotive components  Immediately hiring for Manufacturing Factory Assembly work in Livingston, TN! Get your new Manufacturing career started …

Continue reading “Assembly”

Entry Level, Manufacturing Production Assemblers, Manufacture and assemble automotive components 

Immediately hiring for Manufacturing Factory Assembly work in Livingston, TN!

Get your new Manufacturing career started and apply today! ResourceMFG has urgent hiring needs for Entry Level Production and Manufacturing Associates. 

No Factory, Manufacturing, or Production experience?  No problem! We will train!

Salary Information for Manufacturing Production Associates:? 

  • Pay: $13.50 – $14.50 per hour ALL shifts available (Manufacturing, production, and Factory workers)
  • Hours: Monday through Friday 7am to 3pm, 3pm-11pm and 11pm-7am.  Mandatory OT on some weekends

 Job Responsibilities for Factory Production Workers Include:

  • Meeting quality standards.
  • Assembling automotive components.
  • Conducts daily safety checks.
  • Maintain production goals.

This is a temp to hire position with great benefits for a company in Livingston (38570) that is Team Oriented and Community Driven!

 Apply Today to join our team.

 

 

Job Requirements:

Job Requirements for Factory Production Workers

  • Must be available to work 40+ hours per week
  • Ability to work in a fast-paced environment
  • Production oriented
  • Team Player

 

Primer

Romulus, MI

Base Pay: 20.00 per HOUR

Job: Window Primer Shift: 6:00pm- 2:30am M-F Pay: $20.00/per hour Employbridge is seeking an experienced automotive window primer to join our team in Romulus, MI. …

Continue reading “Primer”

Job: Window Primer

Shift: 6:00pm- 2:30am M-F

Pay: $20.00/per hour

Employbridge is seeking an experienced automotive window primer to join our team in Romulus, MI. Ideal candidate comes with an artistic, detail orientated touch and able to work in moderate paced automotive manufacturing environment while perfecting the task at hand

Job Duties include but are not limited to:

  • Clean and prepare surface for priming
  • Utilize industrial paint tool to apply 2-3 coats of primer on roof top prior to glass window installation
  • Inspect primer for defects prior to packing for delivering
  • Tag/label roof top accordingly
  • Utilize hand scanners and computer system to ensure rooftops are properly sequenced

Qualifications

  • Ability to stand and bend for 8-10 hour shift
  • Ability to utilize hand tools
  • Detail oriented
  • Strong hand/eye coordination
  • Previous experience window priming in automotive setting preferred

CNC Machinist

Paw Paw, MI

Base Pay: 20.00 - 32.00

Job Title: CNC Machinist Location: Paw Paw, MI (On-Site) Job Type: Full-Time (Contract-To-Hire), 1st Shift (7:00am-3:30pm, Monday-Friday) Salary: $20.00 – $32.00 per hour (based on …

Continue reading “CNC Machinist”

Job Title: CNC Machinist

Location: Paw Paw, MI (On-Site)

Job Type: Full-Time (Contract-To-Hire), 1st Shift (7:00am-3:30pm, Monday-Friday)

Salary: $20.00 – $32.00 per hour (based on experience)

About Us: Work for a leading manufacturer specializing in die cast machinery. We are seeking a skilled General Machinist to join our team in Paw Paw, MI.

Job Description: As a General Machinist, you will be responsible for:

  • Tearing apart and rebuilding die cast machines
  • Troubleshooting and repairing machinery
  • Utilizing your own tools for various tasks
  • Reading and interpreting blueprints

Qualifications:

  • Heavy assembly experience
  • Experience working with machines, including setup and teardown
  • Proficiency in reading blueprints
  • Must have your own tools

Work Environment:

  • Collaborative Team: Work with a dedicated team of professionals in a supportive environment.
  • State-of-the-Art Facility: Our facility is equipped with advanced technology to ensure high standards of production.
  • Safety First: We prioritize a safe working environment with regular safety training and protocols.
  • Growth Opportunities: We support continuous learning and development, offering opportunities for career advancement.

Benefits for Experienced Candidates:

  • Competitive Salary: Earn between $20.00 and $32.00 per hour, based on your experience and expertise.
  • Professional Growth: Leverage your experience to advance within the company, with opportunities for leadership roles.
  • Valued Expertise: Your skills and experience are highly valued, and you will play a crucial role in our operations.
  • Comprehensive Benefits: Enjoy a full benefits package, including health insurance, paid time off, and vacation.

How to Apply: Interested candidates should apply online at www.resourcemfg.com.

Human Resources Generalist

Hebron, KY

Base Pay: 23.00 per HOUR

Now Hiring Human Resource Generalist for Warehouse in Hebron, KY!!! 1st shift part time Temporary opportunity  Bilingual in Spanish preferred Pay – will discuss during …

Continue reading “Human Resources Generalist”

Now Hiring Human Resource Generalist for Warehouse in Hebron, KY!!!

  • 1st shift part time
  • Temporary opportunity 
  • Bilingual in Spanish preferred
  • Pay – will discuss during interview process

Job Duties:

The HR Generalist serves as the primary contact for the warehouse, collaborating closely with our HR Business Partner for manufacturing/distribution. They oversee various HR functions, including recruitment, set up interviews with supervisor, employee relations, timecards, Act as a point of contact for employee inquiries, concerns, and conflicts, assist in organizing employee appreciate/engagement events, Prepare and maintain employee records, reports, collaborate with safety personnel to ensure compliance and ensuring the smooth operation of HR activities.

Job Requirements:

  • Minimum 4 years previous HR experience, preferably in manufacturing. 
  • Strong communication and interpersonal skills. 
  • Problem-solving and decision-making abilities. 
  • Organizational and time management skills. 
  • Leadership and teamwork capabilities. 
  • Proficiency in HRIS and Microsoft Office. 

Don't wait! Apply today!

Find factory and manufacturing jobs hiring near you

We know factory and manufacturing jobs

Not all manufacturing staffing solutions are cut from the same cloth. At ResourceMFG, we prioritize developing quality business partnerships with the finest manufacturers so that you have a choice from among the best local factory and manufacturing jobs there are. We are excited to see how you thrive once you start your new career. ResourceMFG serves manufacturing industry verticals, including: automotive, aeronautics, electronics, machining, sheet metal, fabrication, pharma, extrusion, electrical and other specialized producers. And we place employees in temporary, temp-to-hire and direct hire jobs.

We provide the following factory and manufacturing jobs:

We know people

At ResourceMFG, we understand that searching for factory and manufacturing jobs can be trying. That’s why we slow down and get to know you, your goals, and your skill set, so we can match you with great opportunities.

We know that while looking for a new work opportunity, you want flexibility as well as the chance for career growth. You’re focused on bringing your strong work ethic to do the best work you can, and we’re focused on acknowledging you and your work ethic by offering rewards, referral bonuses, and great benefits. See our Job Seekers’ FAQ page for further information.