Job Responsibilities:

• Pressure wash and clean heavy machinery and equipment as directed

• Assist with general shop maintenance including sweeping, organizing tools, and clearing debris

• Support technicians and shop staff with basic tasks and equipment prep

• Comfortable working in outdoor and indoor environments 

• Basic mechanical aptitude including hand tools

• Maintain cleanliness and organization in all work areas

• Perform other duties as assigned by supervisor 

Job Requirements

• Minimum 6 months relevant/recent manufacturing experience 
• Attention to detail
• Able to use basic hand and power tools
• Basic Math
• Mechanical aptitude
• Able to read blueprints/drawings
• Hand eye coordination and dexterity
• Basic computer skills

At ResourceMFG We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

Job Responsibilities:

• Set-up rails, print, and die cut section accurately in accordance with proper setup techniques • Inspect all dies before and after run to ensure that any necessary repairs are made before the next run

• Ensure all bolts for cutting dies are in place and tightly secured

• Monitor box quality, including, but not limited to, loose liner, warp, correct size, and print

• Check anilox rolls for damage

• Maximize the utilization of equipment by operating the machinery at available capacity and speed 

• Cross-train on other machines

• Complete necessary reports in an accurate and timely manner, including but not limited to: Production Data, Machine Operational Status, Safety Data, Quality Data

• Turn in maintenance work orders to supervision for needed repairs. 

Job Requirements

• Minimum 1+ year manufacturing/related press experience
• Attention to detail
• Able to use basic hand and power tools
• Basic Math
• Mechanical aptitude
• Able to read blueprints/drawings
• Hand eye coordination and dexterity
• Basic computer skills

We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

• Responsible for meeting and maintaining the food safety standard.
• Responsible for the sanitizing procedures for food contact and non food contact surfaces.
• Understand and apply appropriate sanitation responsibilities Keep building, grounds and equipment in clean and orderly condition
• Perform heavy cleaning duties such as cleaning floors with brooms, scrubber machines, scrapers, mops, squeegees, or compressed air
• Maintain cleanliness of walls and doors using scrub brushes, scrapers, squeegees, hand towels and pressure washers document and maintain sanitation logs
• Read and understand chemical labels communicate issues to supervisors

Working Conditions:

• Ability to work in temperature controlled environment from 34f to 42f
• Ability to work in a wet cold environment safely work near moving mechanical parts and equipment
• Ability and willingness to stand, walk, stoop, kneel, crouch/bend as needed to perform essential tasks

Min Qualifications:

• High School Diploma or 2 years of relevant experience
• Ability to be flexible with hours
• Effective interpersonal communication skills
• Experience in Microsoft office
• Bilingual in English / Spanish (preferred)

Team Leader Needed! Lafayette, Indiana

Pay: 17/HR

Coordinate and monitor the activities of a work group or cell within a warehouse facility. Provide on-thejob training as needed. Ensure completion of work and customer requirements while complying with all
company quality and safety processes. May provide input to Supervisor or Operations Manager regarding performance.

RESPONSIBILITIES
Oversee the inspection process, responsible for the labourers and the inspection of customer
products for the assigned tables
Must lead by example, be organized, and practice good housekeeping skills in all areas of the facility
Ensure all employees work safely and in accordance with company health and safety policies and
procedures
Report any accidents or incidents that occur within the facility immediately to a supervisor
Responsible for the coordination of shift start activities prior to start time (table requirements,
paperwork, etc.)
Ensure appropriate tools and materials are available for completion of jobs
Provide on the job training for any new work instructions when applicable
Must be accountable for all personnel assigned to specific jobs
Provide input to Supervisor or Manager regarding performance
Report any policy or procedure violations to Supervisor or Manager
Participate, support and comply with all health and safety initiatives and requirements

The above is intended to describe the general content of and requirement for the performance of this job.
It is not to be construed as an exhaustive statement of duties, responsibilities or requirements.

QUALIFICATIONS (Training, Education, Past Experience)
? A high school diploma or equivalent
? Ability to stand for long periods of time
? Ability to work with minimal supervision
? Ability to follow instructions and follow through with assigned tasks
? Ability to communicate procedures and instruct others in a clear and precise manner
? Must be able to read, write, and speak English fluently

ESSENTIAL DUTIES AND RESPONSIBILITIES: • Disassemble and reassemble container and molds • Clean container parts • Sand blast molds • Follow all safe work practices • Other duties may be assigned as necessary • Must be flexible with scheduling (1st, 2nd or 3rd shifts) and overtime hours • Punctuality and regular attendance is required KNOWLEDGE, SKILLS AND ABILITIES: • No experience required • Basic hand finishing experience a plus • Strong shop mathematical skills, including but not limited to the ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Familiarity with metric system a plus • Must be familiar with machinist’s hand tools and possess demonstrated mechanical aptitude • Ability to work safely, follow detailed work instructions, and read and interpret operating and maintenance instructions, procedure manuals and blueprints PHYSICAL DEMANDS/INDOOR MANUFACTURING WORK ENVIRONMENT: • While performing the duties of this job, the employee is regularly required to use hands to handle or feel material • Must be able to communicate verbally and have ability to hear • The employee frequently is required to stand, walk, reach with hands and arms and stoop or crouch • The employee is occasionally required to sit at a work station • The employee must regularly lift and/or move up to thirty (30) pounds and occasionally lift and/or move up to fifty (50) pounds • Specific vision abilities required by this job include close vision, depth perception and ability to focus • The employee is occasionally exposed to moderate cold and extreme heat EDUCATION/TRAINING: • High school diploma or equivalent required • Trade school a plus

ResourceMFG is working with a plastics company located in St. Clair MI looking for an experienced Material Handler. 

3rd shift 10:45pm-7:15am – May need to train on 1st for a couple weeks

$17+$1 shift premium

Summary of Position Responsibilities:

Will provide and maintain proper raw material for each job along with packaging and components.  Will assist with new job set-up and pre-dry materials.  Will mix material based on process requirements utilizing mixers, fines separator, and manual mixing.  Will clean dryer, loader, and hopper filters, along with grinder while maintaining housekeeping standards.  Will assist with breaks.  Will assist with monthly inventory cycle count.

Job Requirement:

Forklift experience required

Repetitive lifting up to 50 lbs

Previous mixing experience preferred

Reliable transportation and attendance

This is a resume and interview position. Please send resumes to [email protected]

Assembly Jobs
HIRING NOW!
Day Shift – Northridge, CA

Check it out for yourself!
Attention to detail? Check. Able to use basic hand and power tools? Check. Know basic math and can follow work instructions? Check check. It all checks out — this is a job where you can succeed! You’ll enjoy great teamwork and support while earning competitive pay, medical and retirement benefits, and the satisfaction of a job well done.

• 1st shift
• Days: Monday – Friday
• Temp to Hire (Full Time)
• Hours: 7:00am – 3:30pm
• Pay: $18.00 per hour

Job Summary:

Assemble or fabricate mechanical parts, or products using variety of tools and equipment according to required specifications in a specific area of a production line in a manufacturing organization.

Essential duties and responsibilities:
• Read, interpret and follow basic blueprints, diagrams, engineering drawings, specifications, bills of materials, and other written instructions or procedures to accurately assemble equipment and products
• Utilize handheld tools such as a handheld screw and drill gun
• Performing soldering, which is the process in which two or more metal items are joined together by melting and flowing a filler metal (solder) into the joint
• Maintain inventory of product in workstations
• Perform quality work checks to ensure the product meets quality standards
• Identify product defects and complete appropriate documentation when defects are identified
• Rework and/or repair assembled equipment and products according to engineering specification changes
• Perform all work in accordance with quality standards and established safety procedures
• Maintain a clean and safe work area

• High School Diploma or GED
• 1-2 years mechanical assembly experience may be required
• Basic reading skills. Must be able to follow directions
• Basic computer navigation and utilization skills
• Ability to perform work accurately and thoroughly
• Ability to use thinking and reasoning to solve a problem and to think in such a way as to produce a new concept or idea
• High attention to detail and self-motivation skills
• Specific technical or vocational training or certification may be required; may be required to pass ruler test

Physical demands and abilities

• Regularly lift 30-50 pounds
• Regularly perform repetitive tasks
• Regularly possess manual dexterity to put parts or pieces together

Employbridge is hiring a data entry clerk for a part time assignment. Nice office and friendly coworkers, flexible schedule. 

• Part time: 16 hours/week 
• Flexible schedule
• Weekly pay
• $16.50/hr
• Benefits available

Data entry duties:

• Entering data in databases, and spreadsheets ensuring accuracy.
• Maintaining data integrity and confidentiality by following standard operating procedures.
• Organizing data for easy retrieval and analysis.
• Collaborating with team members resolve discrepancies and ensure data accuracy.
• Updating existing records as necessary.

• HS diploma or equivalent; documentation required.
• Minimum typing speed 50 words per minute
• Experience with Excel and database management systems
• Attention to detail and strong organizational skills
• Strong verbal and written communication skills

Press Room Operators Wanted

Apply Right Now or Contact Hire Dynamics in Gainesville or Pendergrass!

 Shifts: Overnight 8pm-8am

Overnight Shift: $18.00/hr

JOB DUTIES INCLUDE

• Read a Tape Measure
• Attention to Detail
• Operating Printing Press
• Matching Colors
• Trouble shooting press related issues
• Using Electric Pallet Jack

At Employbridge, we’re in the business of fulfillment. We’re not just talking about jobs, but we do that, too. We’re talking about people and what they want to achieve. When you’re fulfilled, you’re happy. We’re part of the nation’s largest industrial staffing company with hundreds of open jobs with top employers across the country.

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities

Skills and Qualifications

• Must be a self starter who thrives in a team environment
• Must have worked as a machine operator in the past able be able to lift 50 lbs. consistently
• Must be able to climb on ladders and not be afraid of heights
• Be able to work 12 hour shift and including both day and night shift

Employbridge has an immediate opportunity for an Experienced Material Handler for a RECEIVING Dept. in the Albuquerque, NM area. This is a full time Material Handler job with advancement potential. 

• Full Time
• 12 Hour Day shift: Saturday, Sunday, Monday, 11:15am – 11:45pm
• Material Handler rate $21.66/hour
• Benefits available

Material Handler Duties: 

• Operation of sit down forklift 
• Perform top quality work within deadlines with or without direct supervision 
• Interact professionally with other employees, customers and suppliers
• Work effectively as a team contributor on all assignments
• Use the proper hand tools and equipment to assemble or manufacture the product
• Ensure standard operating procedures and processes are followed accurately
• Ensure quality standards are met for the manufactured product
• Follow all company safety policies and procedures to ensure a safe working environment 

Expectations/Essential Functions: 

• Experience in a shipping/receiving department, material handling experience required
• Ability to perform basic mathematical equations, read, and understand measurements
• Ability to read & understand part, component and job instructions
• Ability to create and maintain record retention and retrieval systems appropriate for position.
• Excellent communication skills (verbal, written, listening).
• Years of experience in related field: 1-3.
• Must be able to lift 40lbs.
• Must be able to perform physical tasks for extended periods of time including: standing, walking, pushing/pulling, and lifting.
• Verification of High school diploma or equivalent required.

IMMEDIATE OPENING!
Assembler – Chatsworth, CA
Day/ Night Shift
 
Great company, great pay, great people!
This is your chance to see why our employees are happiest! We are NOW HIRING an Assembler to work at a local manufacturing facility.  If you have at least three months Assembly experience, then competitive weekly pay, medical benefits, and free online skills training are waiting for you!

ResourceMFG has a great opportunity for Mechanical Assemblers worker in Chatsworth, CA for a metal fabrication company that manufactures metal storage products.

• Pay: $22.80/ hour
• Hours: 2nd shift: 1:30pm – 10pm
• Must be able to work up to 12 hours days
• Schedule: Monday to Friday
• Long term – performance to hire opportunity

Duties:

• Reading and comprehending instructions and following established procedures
• Collecting all material and equipment needed to begin the process
• Taking precision measurements to ensure perfect fit of components
• Select or modify components according to measurements and specifications
• Align material and put together parts to build more complex units
• Check output to ensure highest quality
• Maintain equipment in good condition
• Keep records of production quantities and time
• Report on issues, malfunction or defective parts

Why choose ResourceMFG?
Because we are the nation’s first and largest manufacturing focused company, it’s all we do! We work hard for you by fighting for good pay and ensuring a safe work environment. We want to be your advocate and your stepping stone to a career in manufacturing!

Requirements:

• 1 year of mechanical assembly experience with large parts
• Able to work in a fast pace work environment.
• Attendance and punctuality is very important
• Able to lift up to 50 pounds
• Criminal background required and drug tested

Benefits offered:

• Two medical plans options
• Referral Bonus
• Free online education courses
• Career advancement opportunities

We’re Hiring Mechanical Assemblers!

Join the Assembly Dream Team in Carlsbad!

Turn your mechanical skills into a career with impact-help us build the future, one component at a time.

Hiring multiple positions for 1st and 2nd shift.

Do you have cleanroom experience? Do you have microscope, measuring devices (micrometers, gauges, calipers, etc.), and blueprint reading experience? If so, APPLY today!

We need you!

• 1st shift 6am-2:30pm
• 2nd shift 2:40pm-11:10pm
• $20-$23/hour
• Temp to Hire opportunities

Responsibilities:

• Assemble of medical devices using a microscope and use production/inspection tools and equipment needed for product builds
• Operate tools & equipment, and complete documentation as required
• Perform equipment set-up, operation, and in-process inspection in order to accomplish assigned task(s).
• Labeling and packaging of medical products. 

We Offer You:

• Weekly Pay (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

Education:

• High school or equivalent with two or more years of relevant experience.
• Minimum of 3 years of experience in low or high-volume production

Required Experience:

• Hands-on experience in medical device manufacturing or prototyping experience.
• Prior microscope and medical assembly experience required
• Understand and perform in-process inspection to assure workmanship and quality of in-process medical devices.

No Experience Needed
NOW HIRING
Quality Inspector
Morning Shift – Moorpark

Ready for Your Next Career Move in Manufacturing?

Stop searching for manufacturing jobs. Your job hunt ends here. ResourceMFG is looking for a Quality Inspector with a sharp eye for detail to join a top manufacturer. You’ll enjoy competitive weekly pay, solid benefits, and a supportive work environment that values your skills and hard work.

ResourceMFG has a great opportunity for a Quality Inspector within a electronics manufacture in Moorpark, CA.

• Pay: $25 – $30/ hour DOE
• Hours: morning shift
• Schedule: 5/8 or 4/10 options available

Primary Duties and Responsibilities:

• Perform FIRST ARTICLE inspection for all level boards and record results.
• Perform INCOMING inspections for all level boards and components and record results
• Perform FINAL inspections of completed assemblies in accordance with procedures and requirements and record results
• Ensure accuracy of test equipment by checking against standards
• Review and sign company certifications as required
• Check returned/rejected material for status
• Perform random check of in-process jobs as necessary
• Maintain process and swiftness of department yields and accuracy
• Maintain quality records relating to all inspection activities
• Follow instructions with great care and precision

Education and/or experience:

• Knowledge of product, ISO process, IPC A610 Latest Revision, J-STD-01 Latest revision
• Experience with sampling techniques
• Experience with measuring equipment
• Ability to read and interpret assembly drawings and instructions
• General computer knowledge (locating & opening and updating files)
• MS Excel (enter info and format cells)
• Basic math skills
• Ability to Speak, Write, Read and understand English
• Good communications skills

Physical Requirements:

• Good Eyesight visual acuity test required periodically
• Ability to lift up to 50 lbs.

Bilingual Maintenance Coordinator needed in the Poway area.

• 1st shift 6am-2:30pm Monday-Friday
• $20-$25/hr. DOE
• Performance to hire opportunity 

Responsible for performing the computer keying of all maintenance records and repairs on fleet equipment into the maintenance software, answering phone calls from delivery associates and vendors regarding breakdowns, parts ordered, parts deliveries, fuel deliveries, and other fleet maintenance related duties.

Maintain and review the inventory of parts and supplies.

Assign backhaul pickups throughout the day.

1-3 years related experience required.

High School Diploma.

Computer Savvy. SAP experience preferred. Strong data entry skills.

Bilingual Spanish required.

Forklift, Ride-on EPJ exp is a plus (Raymond & Crown).

Must occasionally lift and/or move up to 50 pounds.

Hiring for a Assembly positions in Columbus, IN 

Schedule available and Pay rate: 

• 1st shift: 6:45am – 3:00pm; $19.00/hr
• 2nd shift: 2:45pm – 11:00pm; $20.40/hr
• 3rd shift: 10:45pm – 7:00am; $20.50/hr

Job Description: Assembles and packages parts per written work instructions or supervisor direction. Safely and efficiently operates equipment to produce automotive parts.  

Job Functions:

• Observes operation of machines and verifies conformance to specifications
• Records quality inspection data on check sheets 
• Records production information on daily reports
• Moves control switches to check and reset machines
• Records inventory transactions using the Bar Code Inventory system
• Supplies components to hoppers, indexing poles or conveyors
• Any other duties assigned by supervisor

Required Skills/Competencies/ Safety:

• High School Diploma
• Ability to complete manual or computer production records
• Ability to do basic calculations and measurements
• Ability to develop knowledge of machines and tools, including their uses, minor adjustments and maintenance
• Ability to use basic measuring tools, micrometers, calipers and gauges with training
• Ability to read and follow written and verbal work instructions, and safety rules
• Ability to work with minimal supervision after training is complete
• Customer service and team oriented
• Strict attention to quality and safety

APPLY NOW!!

Position: Maintenance Technician — 3rd shift

11pm- 7am

Location: Manufacturers Road

Daily Duties: 

Maintain, repair, troubleshoot and upgrade of equipment and facility.

Analyze equipment and operational problems for all equipment.

Take corrective action to resolve mechanical / electrical and operational problems

Responsible for making necessary correction and running adjustment for maximum production

Assist with change-over of equipment, as necessary to produce different products

Test equipment to ensure proper operation prior to starting

Lubricate equipment and perform preventative maintenance checks as needed, and / or as requested

Assist with checking product and finished packages for visual effects. 

• At least three years of experience in a similar position
• Must be able to work with power-driven equipment and / or hand tools
• Plant electrical maintenance 
• Troubleshooting experience helpful

#nowhiring

Production Associate in Paoli, IN 

1st shift – $16 per hour Mon-Fri (and 1 Saturday per month) 6am to 3:30pm
3rd Shift – $17.25 per hour Mon-Fri (and 1 Saturday per month) 7pm to 4:30am

We will train

Great Pay. Great People. Great Opportunity. Great Climate Controlled Facility

Job Responsibilities

• Follow safety guidelines
• Follow standard work instructions as assigned
• Perform hands-on tasks
• Lift up to 50lbs, stand, bend, and reach
• May utilize basic hand tools
• Maintain clean and organized workspace
• Identify and resolve problems concerning equipment and materials
• Ensure product meets customer specifications
• Meet production standards
• Work in a team environment
• Accurate recordkeeping and quality documentation

As a ResourceMFG Production Associate We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• FREE ONLINE skills training

Job Requirements

• An onsite tour and interview are required

ResourceMFG is seeking Packagers & Formulate/Grind operators in Orleans, IN!

Immediate Start! Full – Time Long Term Temp job!

1st, 2nd & 3rd shift available! 

Pay rate: $14-$15 Based on shift and department

Location: Orleans, IN 

Packaging Job Functions:

• Work safely and within the guidelines of the Sanitation and Q. A. Department to efficiently grade, pack and box ground beef patties to meet White Castle specifications and U.S.D.A. requirements.
• To work safely grading and straightening the ground beef patties as they come from the slicer to insure the wholesomeness of our product.
• To grade and pack the correct number of patty layers in a box.
• Compile and verify the correct number of boxes packed and report it to the supervisor.

Formulate/Grind Job Functions:

• Set up batches of raw materials onto the meat table and operate conveyors, grinders and mixers.
• Must be able to lift up to 70 lbs. 
• Adjust formula as determined by the Quality Assurance personnel and rework to batches as necessary.
• Clean meat carts if necessary.
• Operate log extrusion equipment.
• Move pallets of raw material to production area and move meat carts to and from tempering room.

Requirements: 

• Must have a High school diploma or GED 
• Ability to work well with co-workers in a physically close environment. 
• Special attention must be given to the QUALITY ASSURANCE GUIDELINES and strict adherence to the guidelines must be maintained at all times to insure the wholesomeness of our product. 
• Must be able to follow both verbal and written work instructions while working closely with Quality Assurance
• Must have knowledge of Lockout/Tagout procedures
• Ability to lift up to 20-25 lbs while bending, turning and twisting

If you have previous experience working in warehouse, manufacturing, retail, assembly, packing, picking and / or retail this is a great opportunity for you!

Apply NOW and schedule your interview within minutes!

Now Hiring Hydraulic Assemblers for an Aerospace Manufacturing Facility in Newnan, GA! 

If you are looking for a position with a clear career path with a company that prides itself on promoting from within, then this is a great opportunity for you. 

Pay: $20.00 per hour PLUS based on experience

Shift:  Mon-Thurs 

• 7:00am – 5:30pm + Voluntary Overtime

Multiple Growth Opportunities!

Modifying and Customizing Shipping Containers for efficient transportation to MAJOR aircraft customers!!!

Duties may include: 

• Reading blue prints
• Using power tools
• Assembling parts for customer orders
• Hydraulics
• Mechanical Maintenance 
• HEAVY LIFTING 

Apply and schedule an interview today!

• At least 2 years of mechanical assembly experience 
• Experience with hand tools
• Updated resume 
• Familiar with automotive manufacturing 
• Positive work attitude
• Electrician experience a plus
• Hydraulic Experience is a must

Job Opening: Electrical Assembler – Modular Data Centers
Location: West Chester
Pay: $25.50/hr — Up to $27/hr for Certified Electricians
Schedule: Thursday–Saturday, 5:00 AM to 5:30 PM (Three 12-hour shifts)

About the Role:
Join our dynamic team as an Electrical Assembler, where you’ll play a critical role in building and commissioning cutting-edge prefab modular data centers. This position offers a unique three-day workweek that promotes work-life balance, with opportunities for overtime based on business volume.

Key Responsibilities
• Factory Acceptance Testing: Perform and witness tests to ensure quality and functionality
• Installations: Execute electrical installations during the assembly process
• Start-Up Works: Support commissioning and start-up of modular data centers
• Integration Support: Assist with integration solutions within the facility
• Maintenance & Repairs: Install, repair, and maintain electrical components of industrial equipment
• Team Collaboration: Work independently or as part of a team to complete projects
• Safety & Compliance: Follow safety protocols and adhere to electrical codes
• Technical Interpretation: Read and apply schematics and technical documents
• Quality Assurance: Conduct inspections and ensure high standards are met

Working Conditions
• Factory environment with strict adherence to safety protocols
• Hands-on, fast-paced, and collaborative atmosphere

Why Join Us?
• Competitive pay with premium for certified electricians
• Work-life balance with a condensed weekly schedule
• Opportunity to work on innovative modular data center technology
• Supportive team and growth-oriented environment

 Qualifications
• High school diploma or equivalent
• Associate degree or equivalent experience preferred
• Completion of an apprenticeship program or journeyman-level experience
• Strong knowledge of electrical codes and regulations
• Ability to interpret schematics and technical documentation
• Physically capable of handling demanding tasks

Immediate Opening

Customer Service Representative in San Clemente

Advance Your Career! 

Looking for your next career move? Don’t miss the opportunity to work for a company that truly cares about you and your success. We are currently looking for an experienced Customer Service Representative. Join our team and receive good pay, good benefits, and FREE online skills training to help you advance your career!

• Monday – Friday
• 8am-4:30pm
• $24-26/ hour 

Job Responsibilities:

• Process customer orders & inquiries via email, phone and fax.
• Track customer orders by using a computer system and working with other departments.
• Maintain customer records by scanning documentation and updating account information.
• Investigates customer concerns and provides prompt resolution.
• Must be able to meet daily deadlines and provide timely follow up.
• General clerical duties include: computer data entry, documentation scanning, occasional  switchboard relief and light filing. Will perform other duties as assigned.
• Process credit memos and carrier claims.
• Maintain customer service manual & documentation forms as necessary
• Maintain & update make & hold/floor stock summary

Job Requirements

• High school diploma or GED required.
• At least two to three years of prior customer service experience is required.
• Must possess proficient and professional email/telephone etiquette.
• Must have experience with Microsoft Outlook (or similar), Excel and Word.
• Must possess accurate math skills.
• Must be well organized and have a strong ability to multitask.
• Position may have minimal overtime.
• Reliable and predictable attendance is required.
• Experience in the manufacturing industry is preferred.
• Must be able to work independently.
• Must be able to speak and write clear English. 
• Ability to speak and write in Spanish is a plus.

Description Reasonable Accommodations Statement To accomplish this job successfully, an individual must be able to perform, with or without reasonable accommodation, each essential function satisfactorily. Reasonable accommodations may be made to help enable qualified individuals with disabilities to perform the essential functions. Essential Functions Statement(s) • Process parts in tanks according to specifications, work order and other requirements • Calculates the appropriate amount of time needed to process parts • Removes parts from tank after specified time, rinses parts and immerse them in bath before finishing processing • Completes paperwork as required by company and processing guidelines • Oversee and assist all line assistants to optimize throughput • Evaluate and log all preventative maintenance on processing line • Ensure all hazardous waste material is disposed of correctly • Able to operate a crane • Other duties as assigned POSITION QUALIFICATIONS Competency Statement(s) • Accountability – Ability to accept responsibility and account for his/her actions. • Accuracy – Ability to perform work accurately and thoroughly. • Applied Learning – Ability to participate in needed learning activities in a way that makes the most of the learning experience. • Communication, Oral – Ability to communicate effectively with others using the spoken word. • Decision Making – Ability to make critical decisions while following company procedures. • Detail Oriented – Ability to pay attention to the minute details of a project or task. • Ethical – Ability to demonstrate conduct conforming to a set of values and accepted standards. • Honesty / Integrity – Ability to be truthful and be seen as credible in the workplace. • Initiative – Ability to make decisions or take actions to solve a problem or reach a goal. • Judgment – The ability to formulate a sound decision using the available information. • Organized – Possessing the trait of being organized

?? Essential Functions:

• Process parts in tanks according to specifications, work orders, and procedural requirements

• Calculate appropriate processing times for each part

• Remove, rinse, and immerse parts in finishing baths as required

• Complete all necessary paperwork per company and processing guidelines

• Oversee and assist line assistants to optimize throughput

• Evaluate and log all preventative maintenance on the processing line

• Ensure proper disposal of hazardous waste materials

• Operate a crane safely and efficiently

• Perform other duties as assigned

Job Description Reasonable Accommodations Statement To accomplish this job successfully, an individual must be able to perform, with or without reasonable accommodation, each essential function satisfactorily. Reasonable accommodations may be made to help enable qualified individuals with disabilities to perform the essential functions. Essential Functions Statement(s) • Process parts in tanks according to specifications, work order and other requirements • Calculates the appropriate amount of time needed to process parts • Removes parts from tank after specified time, rinses parts and immerse them in bath before finishing processing • Completes paperwork as required by company and processing guidelines • Oversee and assist all line assistants to optimize throughput • Evaluate and log all preventative maintenance on processing line • Ensure all hazardous waste material is disposed of correctly • Able to operate a crane • Other duties as assigned POSITION QUALIFICATIONS Competency Statement(s) • Accountability – Ability to accept responsibility and account for his/her actions. • Accuracy – Ability to perform work accurately and thoroughly. • Applied Learning – Ability to participate in needed learning activities in a way that makes the most of the learning experience. • Communication, Oral – Ability to communicate effectively with others using the spoken word. • Decision Making – Ability to make critical decisions while following company procedures. • Detail Oriented – Ability to pay attention to the minute details of a project or task. • Ethical – Ability to demonstrate conduct conforming to a set of values and accepted standards. • Honesty / Integrity – Ability to be truthful and be seen as credible in the workplace. • Initiative – Ability to make decisions or take actions to solve a problem or reach a goal. • Judgment – The ability to formulate a sound decision using the available information. • Organized – Possessing the trait of being organized.

?? Essential Functions:

• Process parts in tanks according to specifications, work orders, and procedural requirements

• Calculate appropriate processing times for each part

• Remove, rinse, and immerse parts in finishing baths as required

• Complete all necessary paperwork per company and processing guidelines

• Oversee and assist line assistants to optimize throughput

• Evaluate and log all preventative maintenance on the processing line

• Ensure proper disposal of hazardous waste materials

• Operate a crane safely and efficiently

• Perform other duties as assigned

JOB DESCRIPTION: Painter lead that understand the variety of surface coatings and paint compatibilities, required PPE and painting equipment, prepare and paint helicopters and helicopter parts in accordance with manufacturing procedures and other data acceptable to or approved by the FAA and able to lead and coach a group of individuals to meet daily goals ESSENTIAL FUNCTIONS & COMPETENCIES: Ability to measure and mix paint and primer components per manufacturer specifications. Surface preparation practices such as composite filling, corrosion removal, sanding, masking, painting, and polishing of helicopters and helicopter parts. Ability to identify and correct imperfections in paint such as adhesion and lifting, blushing, sags, runs, drips, orange peel, solvent pops, pinholes, fisheyes, sanding scratches, wrinkling, and dry spray. Operation of spraying equipment including but not limited to spray booths, compressors, spray guns (HLVP), and mixing equipment. Ability to read and interpret blueprints, drawings, and geometric tolerances. Basic mathematic skills include but are not limited to adding, subtracting, multiplication, division, geometry and algebra for calculating material fabrication. Full compliance with the Company’s DOT Antidrug and Alcohol Misuse Prevention Program. Regular and predictable attendance.

Essential Functions & Competencies:

• ?? Paint Mixing & Measurement: Accurately measure and mix paint and primer components per manufacturer specifications

• ?? Surface Preparation: Perform composite filling, corrosion removal, sanding, masking, painting, and polishing

• ?? Paint Quality Control: Identify and correct paint imperfections such as runs, sags, orange peel, fisheyes, and more

• ??? Equipment Operation: Operate spray booths, compressors, HLVP spray guns, and mixing equipment

• ?? Blueprint Interpretation: Read and interpret blueprints, drawings, and geometric tolerances

• ? Mathematical Proficiency: Apply basic math, geometry, and algebra for material calculations

• ? Regulatory Compliance: Adhere to FAA standards and the Company’s DOT Antidrug and Alcohol Misuse Prevention Program

• ?? Attendance: Maintain regular and predictable attendance to support production schedules

?? Qualifications:

• Proven experience in aerospace or industrial painting

• Strong leadership and coaching abilities

• Knowledge of paint compatibility and PPE requirements

• Familiarity with FAA-approved manufacturing procedures

• Excellent attention to detail and problem-solving skills

• Ability to work collaboratively in a fast-paced environment

Goodyear Company is seeking 1st Shift Material Handler/Forklift Operator Associates!!!

Pay: $21.00 an hour

Location: Goodyear, AZ

Shift: 3rd Shift Hours: 7pm-7am/Rotating Schedule

Forklift Operator Sit Down, double clamp, 4 wheel. Loading/unloading trucks, staging pallets. Shipping & Receiving.

Must wear steel toe shoes Must meet hiring requirements Contract to Hire Weekly Paycheck

Essential Functions Statement(s) • Process parts according to shop work order and applicable specifications and drawings Follow instructions from supervisor pertaining to specific instructions or tasks Ensure integrity of incoming parts (damage, scratches, etc.) Complete work order and all necessary paperwork according to job, drawings and specifications Manage hazardous materials safely and in accordance with state and federal regulations Perform other duties as required

Essential Functions & Responsibilities:

As a Production Technician, you will play a key role in ensuring parts are processed accurately and safely. Your responsibilities will include:

• ??? Processing parts according to shop work orders, specifications, and technical drawings

• ?? Following supervisor instructions for specific tasks and procedures

• ?? Inspecting incoming parts for damage, scratches, or other integrity issues

• ?? Completing work orders and documentation in alignment with job requirements and specifications

• ?? Handling hazardous materials safely and in compliance with state and federal regulations

• ?? Performing additional duties as assigned to support production and operational goals

Qualifications:

• Ability to read and interpret technical drawings and work orders

• Strong attention to detail and commitment to quality

• Familiarity with safety protocols and hazardous material handling

• Excellent communication and teamwork skills

• Prior experience in a manufacturing or production environment preferred

Essential Functions Statement(s) • Process parts according to shop work order and applicable specifications and drawings Follow instructions from supervisor pertaining to specific instructions or tasks Ensure integrity of incoming parts (damage, scratches, etc.) Complete work order and all necessary paperwork according to job, drawings and specifications Manage hazardous materials safely and in accordance with state and federal regulations Perform other duties as required

Essential Functions & Responsibilities:

As a Production Technician, you will play a key role in ensuring parts are processed accurately and safely. Your responsibilities will include:

• ??? Processing parts according to shop work orders, specifications, and technical drawings

• ?? Following supervisor instructions for specific tasks and procedures

• ?? Inspecting incoming parts for damage, scratches, or other integrity issues

• ?? Completing work orders and documentation in alignment with job requirements and specifications

• ?? Handling hazardous materials safely and in compliance with state and federal regulations

• ?? Performing additional duties as assigned to support production and operational goals

Qualifications:

• Ability to read and interpret technical drawings and work orders

• Strong attention to detail and commitment to quality

• Familiarity with safety protocols and hazardous material handling

• Excellent communication and teamwork skills

• Prior experience in a manufacturing or production environment preferred

2nd Shift Set-Up Technician / Lead – Plastic Injection Molding

Type: Full-Time | Monday – Thursday, 3:30 PM – 1:30 AM
Pay Range: $25 – $35/hour (based on experience and qualifications)

About the Role

We’re a growing plastic injection molding manufacturer seeking an experienced Set-Up Technician / Lead to join our 2nd shift team. This is a great opportunity to work in a high-performance environment that values quality, collaboration, and continuous improvement. You’ll play a key role in machine setup, troubleshooting, and ensuring production runs smoothly and efficiently.

Who Thrives Here?

You’ll be a great fit if you embody these core values:

• Positivity: Bring optimism and a can-do attitude.

• Grit: Tackle challenges head-on with resilience.

• Humble Confidence: Know your stuff, but always stay open to learning.

• Hunger: Seek growth, improvement, and excellence every day.

• Team Player: Communicate clearly and support your teammates.

Key Responsibilities

• Set up and start molding machines using provided setup sheets

• Troubleshoot molding issues and adjust processes to ensure part quality

• Set up, validate, and support secondary operations and fixtures

• Perform and document machine adjustments to maintain quality standards

• Train operators on part-specific production and secondary equipment use

• Tag molds for maintenance or repair needs after job completion

• Conduct basic maintenance on molding machines

• Assist with material handling tasks when required

• Maintain a clean, organized, and safe work environment

• Follow all established safety protocols and procedures

Qualifications

• Prior experience in plastic injection mold setup

• Strong understanding of molding processes, machines, materials, and parameters

• Ability to detect and correct quality issues visually and using inspection tools

• Familiarity with basic inspection equipment (calipers, gauges, etc.)

• Ability to navigate and interpret computer-based systems in English

• Experience with Toyo presses is highly desirable

• Reliable attendance and strong work ethic

• Commitment to team culture and core values

What You’ll Get

• Competitive hourly pay

• Medical, dental, and vision insurance

• 401(k) with company match

• Paid time off and holidays

• Opportunities for growth in a fast-paced, values-driven organization

Note: This position operates on a four-day, 10-hour shift schedule (Monday through Thursday), allowing for work-life balance and three-day weekends.

 #nowhiring

Job description

As a Maintenance Technician, you will troubleshoot, install, repair, and perform preventative maintenance on our state-of-the-art industrial equipment and blow molding equipment. You will also work with our mechanical, electrical, pneumatic, and hydraulic systems in the facility.

DUTIES & RESPONSIBILITIES:

• Repair mechanical, hydraulic and electrical equipment
• 2-3 years of maintenance experience in an industrial setting preferred.
• Operational knowledge of automated industrial machinery (motors, servos, pumps, drives, relays, 3 phase power, communication devices, and industrial/electronic controls).
• Ability to work effectively with others, as well as independently
• Perform emergency/unscheduled repairs of production equipment during production
• Performs daily PM’s, as well general maintenance, and routine production line change overs
• Maintain and track repairs with CCMS and Red Zone programs to help manage the facilities downtime and increase production
• Ensure safety standards and expectations are met at all times.
• Maintain a clean, safe work station and surrounding areas.
• Complies with all company policies & procedures including but not limited to attendance & appearance.
• Other duties as assigned.
• Ability to effectively communicate with fellow employees

WORK ENVIRONMENT:

Work is performed in a manufacturing setting with machinery. Physical essential functions of the job include but are not limited to: standing for long periods of time, bending, reaching, and moving around machinery. Lifting up to 50 lbs. on a regular basis. Ability to consistently work in extreme temperatures.

MINIMUM REQUIREMENTS:

· High School diploma or GED

· Previous manufacturing/industrial maintenance experience. 1-2 years minimum

· Working knowledge and proper use of power and hand tools

· Working knowledge of equipment such as Drop Packers, Top Sealers, Palletizers, Case Erectors, Blow Molding machines is preferred

· Knowledge of Pneumatic, hydraulic, electrical, and conveyor systems.

Job Type: Full-time

Salary: $20-25 per hour depending on skill set

Now Hiring: Warehouse General Labors in and around Aurora – Multiple Shifts Available!

Pay: $16-$26 per hour based on experience and shift

Are you looking for a hands-on role in a fast-paced warehouse environment? We’re hiring dependable and hardworking individuals to join our team across various shifts!

All Shifts Available!

• Shift availability and preferences can be discussed during the interview.

Job Responsibilities:

• Load and unload trucks and containers
• Sort, scan, and organize products
• Perform general cleaning and maintenance of work areas
• Assist with inventory counts and documentation
• Follow safety procedures and company policies
• Other duties as assigned

 What We Offer:

• Weekly pay
• Benefits for all associates
• Free online courses to further your career
• Unlimited $100 referral bonuses
• Friendly and supportive team environment

This position includes the opportunity to enroll in Medical, Dental, Vision, Term Life, and
Short-Term Disability benefits, as well as a Retirement Plan. All Illinois talent are also
entitled to accrue and use paid time off. Additional benefits information can be found
here: https://www.resourcemfg.com/employees/benefits/

• Ability to lift up to 50 lbs and stand for extended periods
• Comfortable working in a warehouse environment
• Strong attention to detail and reliability
• Steel toed safety shoes required for most positions
• Must be able to work independently and as part of a team