Skilled Forklift Operators Needed

Forklift Drivers – OPR, Reach Truck & Cherry Picker Operators

1st & 2nd Shift Openings Available

Pay Rate: $20-$26 depending on location and shift

Job Duties

• Safely operate electric OPRs, reach trucks, turrets, and cherry pickers
• Pick single-line items from racks and replenish products in pick modules
• Put product away using proper equipment and techniques
• Successfully complete and pass an EO assessment
• Maintain productivity, safety, and quality standards
• Follow warehouse procedures and maintain housekeeping
• Bring strong attendance, a positive attitude, and the ability to learn
• Understand that you will not be on a forklift the entire shift; other warehouse tasks will be required

Why Join Our Team

• Weekly Pay – Every Friday
• Safe and Clean Warehouse Environment
• Free Online Certifications through Penn Foster
• $100 Referral Bonus – Bring a friend and earn

Apply Today and Start Your Career With Us

THE PURPOSE OF THE LATHE OR MILL OPERATOR IS TO PRODUCE PRECISION PARTS FOR OUR CUSTOMERS.

SUMMARY OF DUTIES:

1) MAINTENANCE OF THE MACHINE

• CHECK FLUID LEVELS INDICATED BY MAINTENANCE CHECK SHEET LOCATED AT YOUR STATION
• FILL OUT MAINTENANCE LOG AS REQUIRED BY CHECK SHEET

2) RUN FIRST PIECE TO BE INSPECTED

• POWER UP MACHINE (IF NECESSARY)
• CHECK FLUID LEVELS PER INSTRUCTIONS
• CHECK WITH LEAD OPERATOR OR SUPERVISOR TO ENSURE THAT THE PROGRAM BEING USED IS THE ONE NEEDED TO RUN YOUR JOB
• CHECK ALL TOOLING 1) ANY QUESTIONS, CONTACT A LEAD OPERATOR OR SUPERVISOR
• RUN THE FIRST PIECE
  • 1) DIMENSIONALLY CHECK PART FOR CORRECTNESS PER INSTRUCTIONS
  • 2) TAKE PART TO QUALITY CONTROL FOR APPROVAL
• ANY NECESSARY CHANGES TO BE MADE, CONTACT A LEAD OPERATOR OR SUPERVISOR

3) START DAYS PRODUCTION RUN

• CHECK WITH SUPERVISOR TO FIND OUT NUMBER OF PIECES NEEDED TO RUN FOR THIS JOB
• RUN THE JOB COMPLETE FOR YOUR OPERATION OR UNTIL NEXT SHIFT ARRIVES AFTER FIRST PIECE APPROVAL

4) CLEAN WORK AREA DAILY

• THE OPERATOR IS TO KEEP THE WORK CENTER FREE FROM TRASH AND DEBRIS
• MOP AREA
• WIPE MACHINE DOWN (AS NEEDED)

5) OTHER ITEMS AS REQUIRED BY SUPERVISION

• SUPERVISION MAY REQUIRE THE OPERATOR TO PERFORM OTHER DUTIES OUTSIDE OF THOSE LISTED ABOVE
• WHEN DOING OTHER WORK, PERFORM THOSE DUTIES ACCORDING TO ITS JOB DESCRIPTION

6) GOALS

• A LATHE OR MILL OPERATORS GOAL SHOULD BE TO COMPLETE THE MATRIX TRAINING FOR THEIR ADVANCEMENT INTO A LEAD OPERATOR POSITION

Hiring for Janitorial position for a weekend shift in Greencastle, IN!!

Shift & Pay rate: Friday, Saturday and Sunday from 5:00am – 2:30pm for $18 an hour

Job description:

• Clean the interior of buildings including floors, carpet, rugs, windows and walls
• Disinfect commonly used items like desks, door handles, office tools and phones
• Maintain cleaning inventory, placing orders for new products when needed
• Maintain outdoor grounds, cut grass and trim bushes
• Remove debris and snow from sidewalks

• Good communication skills
• Knowledge of various cleaning products and when to use them
• Ability to clean and disinfect various surfaces
• Ability to lift and move at least 50 pounds
• Good organization skills
• Knowledge of safety guidelines when working with chemical cleaners
• Excellent time-management skills

If you are safety-minded, detail-oriented and hardworking, the perfect Overnight Mill Operator position is waiting. Work for a great company offering weekly pay and benefits. As a part of our team, you also get access to FREE skills training and other benefits to help you grow in your career.

Pay: 15.00 per hour 

6am-4pm

Mill Operator Responsibilities:

• Operate machines that process and package food products
• Check processing conditions
• Troubleshoot problems, minor equipment repairs
• Install, adjust, and unlock machines
• Check products to ensure compliance with current standards
• Keep production records
• Clean machines and immediate work areas

Molding Backup Shift Lead

Shifts Available: 2nd & 3rd Shift

Training Requirement: Must be able to train on 1st shift

Employment Type: Full-time

Pay Range: $19.50 – $25.00 per hour

We are looking for an experienced, reliable Molding Backup Shift Lead to support our molding operations on 2nd and/or 3rd shift. This position provides hands-on support to production, ensures safe and efficient operations, and helps maintain high quality standards across the shift.

All candidates must be available to train on 1st shift during on-boarding before transitioning to their assigned schedule.

Key Responsibilities

• Assign daily work assignments and ensure proper coverage across workstations
• Provide support and leadership to molding operators throughout the shift
• Perform quality checks to confirm products meet specifications
• Complete and maintain accurate shift reports and production documentation
• Monitor workflow, identify issues, and escalate when necessary
• Train and coach employees on molding processes, quality expectations, and safety practices
• Serve as backup lead to support smooth shift operations when the primary lead is unavailable 

Required Qualifications

• Experience in injection molding operations
• Understanding of production floor workflow and manufacturing processes
• Strong communication and leadership skills
• Previous Lead/Supervisor experience 

#nowhiring

*

Join us for a Spring Job Fair in Oceanside, CA!

Date: Tuesday, March 31, 2026

Time: 10:00am – 2:00pm

Event Location: 

Select Staffing/ ResourceMFG – 3829 Plaza Drive, Suite 602 Oceanside, CA 92056

Do you have experience with medical device cleanroom, microscope, measuring devices (micrometers, gauges, calipers, etc.), and blueprint reading experience? If so, JOIN US!

Shifts Available

• 1st Shift: 6:00am – 2:30pm
• 2nd Shift: 2:40pm – 11:10pm

Pay Rate: $20–$23/hour Employment Type: Full Time – Temp to Hire

We’re Looking For:

• Cleanroom experience
• Experience using microscopes and precision measuring tools (micrometers, gauges, calipers, etc.)
• Ability to read and interpret blueprints
• Strong work ethic and dedication to quality

Responsibilities

• Assemble medical devices using a microscope and required production/inspection tools
• Operate equipment and complete documentation accurately
• Perform equipment setup, operation, and in-process inspections
• Label and package medical products

We Offer You:

• Weekly Pay (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

 #nowhiring

Education:

• High school or equivalent with two or more years of relevant experience.
• Minimum of 2 years of experience in low or high-volume production

Required Experience:

• Hands-on experience in medical device manufacturing or prototyping experience.
• Prior microscope and medical assembly experience required
• Understand and perform in-process inspection to assure workmanship and quality of in-process medical devices.

Event Requirements:

• Important: Please complete application prior to arriving to event!
• Please bring documents verifying your identity and authorizing you to work in the United States.
• Bring your friends and family members! 
• We offer Referral bonuses!

 No appointment necessary. Just come in and don't forget to bring your smile. 

Produce quality products. Run variety of similar machines (Threading, Reaming, Turning, Forming) at times with another team.

#nowhiring

Able to run a variety of machines and adapt to changing priorities. Able to read and follow work orders, able to read measurements and do simple math. Must be able to read and follow safety rules.

Quality Assurance Technician

Optics Fabrication Technician

Shifts Available: 2nd Shift & Weekend Shifts Shift Differential: Additional compensation applies for Weekend and 2nd Shift schedules. Training Requirement: Must be able to train on Day Shift.

Position Overview

We’re looking for a detail-oriented Optics Fabrication Technician to support the production of high-precision optical components. In this hands-on role, you will work with specialized equipment to grind, polish, inspect, and finish optical parts used in advanced applications. If you enjoy precision work, technical processes, and seeing a high-quality product come to life, this role is a great fit.

Optics Fabrication Technician Key Responsibilities

• Fabricate optical components using grinding, polishing, and finishing equipment
• Inspect parts using microscopes, gauges, interferometers, and other metrology tools
• Perform surface quality checks and measure optical specifications
• Clean, prepare, and safely handle optical materials
• Set up and operate fabrication tools following work instructions
• Maintain accurate production records and documentation
• Keep work areas clean, organized, and compliant with safety standards
• Assist with process improvements and workflow efficiency
• Perform routine equipment maintenance and basic troubleshooting

Optics Fabrication Technician Qualifications

• High school diploma or equivalent
• Strong attention to detail and manual dexterity
• Ability to follow technical instructions and handle delicate materials
• Experience with precision manufacturing, optics, machining, or related fields preferred
• Basic understanding of measurement tools
• Good hand-eye coordination and ability to work under magnification
• Experience in optical fabrication (grinding, polishing, lapping, etc.)
• Familiarity with optical inspection equipment such as interferometers or profilometers
• Knowledge of optical tolerances, surface quality, or cleanroom practices

#nowhiring

Now Hiring Thin Film/Coating Technician – Boulder, CO

Shifts Available: Weekend Shift & 2nd Shift

Pay: $20–24 per hour

Shift Differential: Additional compensation applies for Weekend and 2nd Shift schedules.

Training Requirement: Must be able to train on Day Shift. 

Thin Film/Coating Technician Position Overview

Step into a hands-on, high-impact role at the heart of our coating operations! As Thin Film/Coating Technician, you’ll work with advanced deposition technology to create precision-engineered coated components used in cutting-edge applications. If you enjoy working with sophisticated equipment, solving problems, and seeing the results of your work every day, this role puts you right at the center of production excellence.

Thin Film/Coating Technician Key Responsibilities

• Operate and monitor deposition equipment
• Prepare materials and tooling
• Inspect coated parts for quality
• Maintain logs and perform routine equipment upkeep
• Follow all safety and process guidelines
• Clean and perform routine inspection and measurement of substrates; typically performs spin cleaning and works on smaller optics
• Set up tooling
• Load parts into chambers
• Foil chambers
• Change targets
• Use a spectrophotometer to scan optical components (as needed)
• Perform regens
• Beadblast chamber components
• Perform basic chamber maintenance
• Start coating runs
• Rebuild ebeam sources with supervision

#nowhiring

ResourceMFG is now hiring Utility Workers in Ogden

We are seeking Utility Workers for a local flour mill. This position is critical to maintaining a safe, clean, and efficient manufacturing environment.

Pay: $23.15 per hour

Shift: 7:00 AM – 7:00 PM (Rotating Days)

Location: Ogden, UT

Key Responsibilities

• Clean and maintain floors, equipment, rail cars, racks, and surrounding production areas
• Sweep, mop, and shovel flour and excess product that falls due to grinder overflow
• Perform general housekeeping and sanitation tasks across the mill
• Identify and report safety hazards or maintenance needs
• Work safely around operating machinery and follow all PPE requirements
• Support operational teams with additional tasks as needed

#Applynow

ResourceMFG is Hiring for a Prestigious Energy Client in Durham!

ResourceMFG is currently seeking passionate, skilled professionals to join the team of a prestigious client in Durham that’s helping to shape the future of energy. If you’re ready to be part of an innovative company with a strong mission and real-world impact, this could be the perfect opportunity for you.

Assembly Technician – Durham, NC

Schedule: Monday – Friday | 6:00 AM – 2:30 PM (or 4:30pm with OT)

Pay Rate: $18.50+ DOE

Responsibilities of an Assembly Tech

• Perform final assembly of products according to specifications and quality standards
• Inspect finished products for defects to ensure they meet customer requirements
• Operate hand and power tools to complete assembly tasks safely and efficiently
• Read and interpret blueprints, diagrams, and work instructions
• Collaborate with team members to maintain an efficient and organized workflow
• Maintain a clean and orderly work area
• Report equipment or material issues to supervisors promptly
• Participate in continuous improvement initiatives to enhance productivity and product quality

• Requirements High school diploma or equivalent
• Previous experience in manufacturing or assembly preferred
• Ability to read and interpret blueprints and schematics
• Proficient in the safe use of hand and power tools
• Strong attention to detail

ResourceMFG is hiring in Midway KY! 

1st shift; $17 PER HOUR; 7AM-3:30PM

2nd shift; $18 PER HOUR, 4PM-12PM

• Must have forklift or cherry picker experience
• Must be okay with heights and wearing steel toe boots
• Picking orders, using RF Scanner, inventory counts, operating cherry picker, pallet jacks. 

Temp to Hire! 

Excellent benefits available during Temp to Hire and when hired Perm. 

Quality Assurance/Inspection

1st and 2nd shift available

ResourceMFG NOW HIRING Pick/Packers 

Location: Lafayette, Indiana

Shift: Day 6:00 am – 4:00 pm or Evening 4:00 pm – 2:00 am

Pay Rate: $16 – $17 per hour

This position is responsible for a variety of warehouse tasks, including but not limited to picking, packing, forklift operations, receiving operations, cycle counts of inventory. The position requires the highest level of accuracy due to customer expectations. This position will be handling/sorting of parts into racks or containers throughout the day.

We Require Our Customers to Offer:

• Safe and clean work environment
• Employee focused workplace
• Safety programs and training

As a ResourceMFG Production Associate We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

ResourceMFG is now hiring Saw Operators for a steel production facility in Warren, MI!

Shift: 6:00am-2:30pm (up to 4:30pm)

Pay: Starting at $18.00/hr, negotiable based on experience

Job Requirements:

• Setting up and operating a saw to cut steel.
• Previous experience operating an overhead crane
• Previous experience operating a forklift; experience on a sit-down forklift is preferred.
• Performing quality checks

Previous experience operating a saw, overhead crane, and forklift

Job Title: MIG Welder

Location: Plymouth

Pay Rate: $18.00

Schedule: 2p-10p or 10p-6a

Job Overview:

We are seeking skilled and motivated MIG Welders to join our team in New Hudson! This is an excellent opportunity for individuals with welding experience looking for steady work, a consistent schedule, and opportunities for growth.

Responsibilities:

• Perform MIG welding on mild steel components
• Follow blueprints, welding symbols, and shop drawings
• Inspect welds to ensure accuracy and quality
• Maintain a clean and safe work environment
• Assist with general shop duties as needed

Requirements:

• Previous MIG welding experience required
• Ability to read and interpret blueprints
• Must be able to lift up to 50 lbs and stand throughout the shift
• Steel toe boots required

Mig Welder

ResourceMFG is now hiring CNC Laser Operators for a steel production site in Warren, MI!

Shift: 4:00pm-2:30am

Pay: $20-$22/hr

*Previous experience is required for this role*

JOB DUTIES:

• Setting up, operating, and maintaining CNC laser cutting machines to precisely cut and shape materials.
• Reading blueprints
• Operating overhead crane
• Loading/unloading material
• Performing quality checks

Previous experience operating a CNC laser, overhead crane, and forklift

ResourceMFG Hiring for Central Stores Clerk

Shift:

1st-7am-3:30pm (M-F, occasional Saturday)

2nd-2:30pm-11pm (M-F, no Saturday) 

Pay:

1st-$17.50/hr

2nd- $18.38/hr

Job description:

• Support Central Stores in receiving, stocking, delivery, and returning of materials, distribution of mail, front counter support, and inventory cycle counting.? 
• Unloading of all freight and box truck deliveries 
• Label and stock material in storage location 
• Reconciliation of material shortages/overages via receipt or issue 
• Stock Lab Building T70 with chemicals and lab supplies 
• Handling of Water Samples, Oil Drums, Cylinders 
• Handle all plant mail 
• Maintain all pipe inventory in the shops, including plywood, conduit, and all metals 
• Work in a fast pace environment, handling transitions to standards 
• Use of company vehicles and fork trucks for daily operations.
• General housekeeping of department area (sweeping, dusting, organizing shelves, breaking down boxes)

• High School Diploma or HSE
• Attention to detail
• Strong trouble shooting and some mechanical aptitude are helpful
• Able to lift up to 50 pounds from floor to waist on routine basis
• Resume required for secondary interview
• Valid driver's license
• Comfortable using sit down forklift (training provided)
• Potentially hazardous conditions involving the handling of acids, caustics, and other hazardous chemicals and potential allergens

NOW HIRING: Press Operators – Belleville, MI

Shifts: 6:00am–2:00pm or 2:00pm–10:00pm

Pay: $18/hr

Start ASAP!

We are seeking reliable and motivated Press Operators to join our team in Belleville. This is a great opportunity for candidates looking for steady work, weekly pay, and a long-term position.

Job Duties:

• Operate press machines according to safety and quality standards
• Inspect parts for defects and maintain a clean work area
• Keep accurate production counts and follow work instructions
• Assist with basic machine setup and material handling

 Requirements:

• Ability to work in a fast-paced manufacturing environment
• Must be able to stand for shifts and lift up to 30 lbs
• Steel-toe shoes required
• Previous manufacturing or press experience preferred but not required
• Reliable transportation and good attendance a must

 What We Offer:

• Weekly pay at $18/hr
• 1st and 2nd shift openings
• Immediate start dates
• Opportunity for long-term placement and growth

Employbridge is now hiring experienced MIG Welders in Hamtramck, MI!

Shift: 7:00am-3:30pm

Days: Monday-Friday

Compensation: $29-32 per hour (based on experience)

Contract-To-Hire

Responsibilities:

• Cart Preparation: Secure tracking plates onto all received carts (placarding).
• Inspection & Maintenance: Conduct a 9-point inspection process and perform preventative maintenance on steel carts.
• Organization & Logistics: Sort carts by style, repair needs, and readiness for shipment.
• Repairs & Assembly: Utilize heavy tools to replace small parts, chains, wheels, and arms with newly ordered components.
• Welding & Fabrication: Perform welding and torch-cutting to repair and reinforce steel carts.
• Cleaning & Finishing: Power wash carts post-repair and dry them thoroughly before shipment.
• Painting & Aesthetic Touch-Ups: Conduct minor repainting based on customer requests.

Electric Pallet Jack and Forklift Operator – Yamaha

Location: Newnan, Georgia

Pay: $18

Schedule: 1st Shift, Monday through Friday

Job Description:

Yamaha is seeking an experienced Electric Pallet Jack and Forklift Operator to join our team! The ideal candidate will have at least six months of recent experience operating both Sit Down Forklifts and Electric Pallet Jacks. This position plays a key role in supporting production and warehouse operations by safely and efficiently moving materials, loading/unloading trucks, and maintaining accurate inventory.

Responsibilities:

• Operate Sit Down Forklifts and Electric Pallet Jacks safely and efficiently
• Load, unload, and transport materials throughout the facility
• Support production and shipping teams with material handling needs
• Inspect equipment daily and report maintenance or safety concerns
• Follow all company safety policies and procedures

Qualifications:

• Minimum 6 months of recent experience operating Sit Down Forklifts and Electric Pallet Jacks
• Valid forklift certification preferred
• Ability to lift up to 50 lbs and work in a fast-paced environment
• Reliable attendance and strong attention to detail

Why Join Yamaha?

• Competitive pay and benefits
• Opportunity for long-term employment and growth
• Safe, team-oriented environment

EmployBridge is now hiring Warehouse General Laborers in Athens, TN.

Are you looking to get your foot in the door doing warehouse work?  We have immediate openings for Warehouse General Labor!

No Experience?  NO PROBLEM!!  We will train!!  These roles are Temp to Hire!!  

Shifts

• Evenings- 2nd – $17.44/hr: 2:30pm-11pm
• Nights- 3rd – $17.49/hr: 10:30pm -7am

 Job duties for the Warehouse General Laborer position:

• General Labor Moving/Loading steel rods onto conveyor system by hand
• Moving product throughout the warehouse

 Requirements for the Warehouse General Laborer position:

• Must be comfortable with physical work 
• Must be able to lift up to 50 lbs.
• Must be able to lift repetitively
• Must have High School Diploma/GED 

  #nowhiring

Don't wait! Apply today & start ASAP. 

Opening for Forklift Operator with a warehouse located in Sparta!

Great Temp to Hire Opportunity for an experienced forklift operator!

If you have 1 year Forklift Operator experience within the past 3yrs and have been certified, we need you!

Day shift 7:00am – 4:00pm

Monday – Friday

$16.75 per hour starting pay

Requirements for Forklift Operator:

• Ability to work in a fast paced warehouse 
• 1yr forklift experience in the last 3yrs IS REQUIRED
• Steel toe boots/shoes required
• Previous warehouse experience
• Must have Highschool Diploma/GED

Forklift

#nowhiring

ResourceMFG has partnered with a premier employer in Miamisburg, OH and is seeking MIG Welders to join their growing team!

Job Title: MIG Welder

Shifts Available: 

• 2nd Shift 10 hour shift Monday-Thursday
• 12 hour shift Friday-Sunday

Pay Rate: $21/hour + $2/hour shift differential

Responsibilities Include: 

• MIG welding 
• Deburring metal parts
• Rework of defective parts
• Fabrication of products
• Assembly
• uQality inspection

Perks Include:

• Weekly Pay
• Direct Deposit Option
• Benefits Available: Medical, Dental, Vision
• Free Online Courses through Penn Foster
• Employee Discounts through Working Advantage
• Opportunity for advancement

#nowhiring

Requirements:

• MIG Welding
• Reliable transportation required

#nowhiring

Now Hiring Mechanical Assemblers for an Aerospace Manufacturing Facility in Newnan, GA! If you are looking for a position with a clear career path with a company that prides itself on promoting from within, then this is a great opportunity for you. Pay: $19+ per hour starting pay based on experienceShift:  Mon-Thurs 7:00am – 5:30pm + Voluntary OvertimeMultiple Growth Opportunities!Modifying and Customizing Shipping Containers for efficient transportation to MAJOR aircraft customers!!!Duties may include: Reading blue printsUsing power toolsAssembling parts for customer ordersQuality Assurance on partsMechanical Maintenance HEAVY LIFTING At least 3 years of recent mechanical assembly experience in a manufacturing environmentExperience with hand toolsUpdated resume Familiar with automotive manufacturing Positive work attitudecarpentry or construction background preferredMechanical Experience is a must  

All shifts available –

support the manufacturing of automotive lighting components by assembling, inspecting, and testing parts according to established quality and production standards. This role requires attention to detail, consistent pacing, and the ability to follow standardized work instructions in a fast-paced manufacturing environment.

• Assemble, align, and adjust components according to specifications and standardized manufacturing procedures.

• Use hand tools, power tools, fixtures, and other assembly equipment to complete production tasks.

• Inspect work for defects at each step, ensuring quality standards and tolerances are met.

• Test and calibrate parts or assemblies as required.

• Maintain accurate daily production records and documentation.

• Keep work area clean, organized, and compliant with safety requirements.

• Contribute to a team-focused environment by maintaining communication and supporting workflow needs

• Set up, operate, and troubleshoot CNC 3 & 4 axis machines
• Inspect with precision using calipers, micrometers, and other tools
• Read and interpret complex blueprints and GD&T documentation
• Keep your station clean, organized, and optimized for production
• Maintain top-notch quality standards in every part you produce

• Set up, operate, and troubleshoot CNC 3 & 4 axis machines
• Inspect with precision using calipers, micrometers, and other tools
• Read and interpret complex blueprints and GD&T documentation
• Keep your station clean, organized, and optimized for production
• Maintain top-notch quality standards in every part you produce