Forge Helper – Job Description Department: Manufacturing / Forge Operations Position Type: Full-Time, Entry Level Location: Paramount, CA Overview The Forge Helper supports forge operators and production teams in the fabrication of forged metal parts. This entry-level position contributes to daily production goals by maintaining clean work areas, assisting with material handling, and adhering to established safety and quality standards. On-the-job training is provided. Key Responsibilities Assist forge operators with production tasks and workflow support. Handle materials safely and assist with furnace operations under supervision. Clean and lubricate equipment; sweep dies and remove scale and scrap. Support the setup of dies and tooling as directed. Maintain a clean, organized, and safe work environment. Follow work orders, shop travelers, and supervisor instructions. Comply with all safety, quality, and PPE requirements. Perform additional duties as assigned. Work Environment This role requires standing and walking for extended periods and working near hot forging equipment. Personal protective equipment (PPE) must be worn at all times.

Forge Helper – Job Description

Department: Manufacturing / Forge Operations Position Type: Full-Time, Entry Level Location: Paramount, CA

Overview

The Forge Helper supports forge operators and production teams in the fabrication of forged metal parts. This entry-level position contributes to daily production goals by maintaining clean work areas, assisting with material handling, and adhering to established safety and quality standards. On-the-job training is provided.

Key Responsibilities

• Assist forge operators with production tasks and workflow support.

• Handle materials safely and assist with furnace operations under supervision.

• Clean and lubricate equipment; sweep dies and remove scale and scrap.

• Support the setup of dies and tooling as directed.

• Maintain a clean, organized, and safe work environment.

• Follow work orders, shop travelers, and supervisor instructions.

• Comply with all safety, quality, and PPE requirements.

• Perform additional duties as assigned.

Work Environment

This role requires standing and walking for extended periods and working near hot forging equipment. Personal protective equipment (PPE) must be worn at all times.

Manufacturing Company is looking for a Mechanical Assembler to join their team. 

Shift: 1st
Days: Monday – Friday
Temp to Hire (Full Time)
Hours: 6:30am – 4:00pm
Pay: $18.00 per hour

Job Summary:

Assemble or fabricate mechanical parts, or products using variety of tools and equipment according to required specifications in a specific area of a production line in a manufacturing organization.

Essential duties and responsibilities:
• Read, interpret and follow basic blueprints, diagrams, engineering drawings, specifications, bills of materials, and other written instructions or procedures to accurately assemble equipment and products
• Utilize handheld tools such as a handheld screw and drill gun
• Performing soldering, which is the process in which two or more metal items are joined together by melting and flowing a filler metal (solder) into the joint
• Maintain inventory of product in workstations
• Perform quality work checks to ensure the product meets quality standards
• Identify product defects and complete appropriate documentation when defects are identified
• Rework and/or repair assembled equipment and products according to engineering specification changes
• Perform all work in accordance with quality standards and established safety procedures
• Maintain a clean and safe work area. 

Requirements: 

High School Diploma or GED
1-2 years mechanical assembly experience may be required
Basic reading skills. Must be able to follow directions
Basic computer navigation and utilization skills
Ability to perform work accurately and thoroughly
Ability to use thinking and reasoning to solve a problem

1st Shift Welders Needed to Start Immediately at local Manufacturing company. 

Payrate and Available First Shift Hours for a MIG/TIG Welder:

• $16.00 per hour
• Monday – Thursday 6am to 2:30pm

Why Join ResourceMFG as a MIG Welder?

• Get paid EVERY Friday with Weekly Pay 
• Medical Benefits for your Entire Family!
• Career Advancement.
• FREE, Online College Courses!

 What Will You Be Doing as a MIG/TIG Welder?

• Measure and cut materials to specifications for assembly.
• Weld materials using the correct materials to join the metals together.
• Check finished work to ensure product falls within the tolerances marked on instructions.

 Apply Today!

ESSENTIAL DUTIES AND RESPONSIBILITIES:2.1. Performs measurements for the product approval process2.2. Compiles data, generates, and presents a variety of reports such as:2.2.1. Dimensional layouts2.2.2. Capability and Measurement Correlation Studies2.2.3. Ballooned Prints2.2.4. Gage R & R studies2.3. Coordinates dimensional layouts by external sources as necessary2.4. Maintain and verifies calibration of gages and measurement tools2.5. Perform other work related duties as required.2.6. Support GGI’s quality management system.

Now Hiring – Manufacturing Positions

Location: Wooster, OH

We are hiring dependable candidates for manufacturing positions. These roles involve hands-on work with wire, coiling, and general production processes in a manufacturing environment.

Position Highlights:

• Full-time opportunities
• Wire handling and coiling work
• Manufacturing / production duties
• Long-term potential packing

Physical Requirements:

• Ability to stand for 8–10 hours per shift
• Ability to bend, twist, turn, and reach overhead
• Ability to lift up to 40 lbs

We Offer:

• Competitive weekly pay (direct deposit or pay card)
• Health benefits and 401(k) options
• A personal recruiter to support you throughout your assignment
• Free online skills training to help you grow and advance
• Opportunities for long-term employment

Apply today and take the next step in your career with a team that values your skills and drive.

We strongly encourage our military personnel and veterans to apply now!

#nowhiring

Mig Welder

Aluminum Highly Desired

Fantastic shop near the Beltway and 290 is hiring a mig welder to produce their boatlifts and ATV accessories.  Your solid skills with mig and working with aluminum and running aluminum wire will put you in front of the client quickly.  If you don’t have experience with aluminum but learn quickly and exude a desire to learn, your great attitude will suffice!

For you – 

• 1st Shift
• Great Colleagues
• Pay Starting at $18 – 22/hr

And 

While working with ResourceMFG Employbridge you will experience:

• Direct Deposit and Weekly Pay
• Free online training to enhance your career
• Access to Medial, Dental, Vision, Retirement Savings and Tons of Discount Programs
• Unlimited Referral Bonuses

Client is looking for 1 - 3 years experience:

• Mig Welding
• Layout, Cut and Fit - highly desired
• Can Read Prints and Drawings
• Carbon Steel and Aluminum
• Aluminum Wire - Experience welding aluminum is highly desired.

Local light assembly and warehouse location is looking for Warehouse Team Members to assist in their day shift operations. Responsibilities for these positions will vary slightly, but can include any and/or all of the following: light assembly, picking/packing, breakdown, and other tasks as needed. Ideal candidates are punctual, easy to work with, dependable, and able to follow instructions well. This is a performance to hire role. Conversion to full time is an option and based on performance and need.  

Hours: Monday-Friday 6:30am-3:15pm (Some overtime as needed)

Pay: $18.00 per hour

EmployBridge offers access to health benefits, learning tools, and certification classes to help you grow in your next career.

If you are experienced in warehouse/light assembly and looking for a stable opportunity in the Princeton area please APPLY TODAY!

Assembly position in Comstock Park Area!

Day Shift (Monday-Thursday 6am-4:30pm)

Pay: $18.00/Hr.

The Assembler is responsible for basic, manual tasks related to assembling industrial HVAC units. Tasks can include building basic subassemblies using hand tools (wrenches, hammers, pliers and drills), installing high-temp padding (either cut with retractable knife or using a simple spot welder), and assisting in installation of components for the unit (fans, shafts, dampers, etc.). After training, this position will build smaller HVAC units. Assignments will typically be overseen by the more experienced Assemblers in the area. The tasks that make up this job will be taught to a new Assembler.

Assembly position in Comstock Park Area!

Day Shift (Monday-Thursday 6am-4:30pm)

Pay: $19.00/Hr.

The Panel Builder is responsible for building custom electrical panels to be installed in industrial HVAC equipment. This includes mounting electrical devices (transformers, drives, etc.) to a backplate using hand tools (screwdrivers, pliers, wrenches), running wire between the devices using hand tools (wire cutters and strippers) and labeling each wire during the build. A typical panel takes 8 hours to build. The layout of each panel is shown on a set of electrical prints. The process of panel building, as well as the specifics of reading an electrical print, will be taught to a new Panel Builder. 

#nowhiring 

Duties and Responsibilities of the Job 

• Conducts First Off Last Off checks. 

• Complete Process Parameter Checklist, communicate out-of-tolerance results to Production Supervisors and lead corrective action activities with support from the Quality Engineer. 

• Summarize Process Parameter performance. 

• Complete Receiving Inspection per Work Instructions. 

• Complete Dock Audits per Work Instructions.

• Maintain Calibrations per QSI Calibration database. 

• Complete testing per Work Instructions. 

• Completes forms, recording, evaluating and reporting quality and reliability data.

• Assist in training new operators to WI’s and customer specification requirements.  

• Adhere to ISO 14001 requirements

• Adhere to IATF 16949 requirements. 

• Overtime is sometimes required which may include weekends. 

• Ability to lift a minimum of 25lbs overhead as needed. 

• Ability to stand for long periods of time.

Skills preferred to perform the job 

1. Mechanical aptitude, good hand – eye coordination. 

2. Computer skills (MS Office, Lotus Notes, AS400 Database) as needed.

3. Good organizational, written and verbal communication skills. 

4. Ability to understand and react to technical data (e.g., part weight, color test, resin extraction, tensile strength, flammability) as defined by procedures.

1+ years of previous quality experience

Ink Mixing / Forklift Associate (Temp-to-Hire)
Location: Bedford Park, IL 
Job Type: Temp-to-Hire

Permanent Schedule : 

• 1st Shift: 7:00 AM – 3:30 PM

Job Summary:
We are seeking a detail-oriented Ink Mixing / Forklift Associate to join an ink preparing and mixing department. This is a temp-to-hire opportunity for a reliable candidate who can work independently in a fast-paced, hands-on production environment.

Key Responsibilities:

• Mix paint and ink according to written instructions and formulas

• Lift and move paint buckets and barrels manually or with lifting devices

• Wash and clean containers after use

• Perform order picking using a sit-down forklift or reach truck

• Complete basic data entry, order entry, and order completion on a computer

• Maintain accuracy and quality while working independently

• Follow safety and housekeeping standards

Requirements:

• Steel-toed shoes required

• Sit-down forklift experience preferred

• Strong attention to detail

• Ability to work independently with minimal supervision

• Comfortable working in a hot, messy industrial environment

• Basic computer and data entry skills

• Ability to lift and handle paint containers with or without assistance

Why Work With Us:

• Temp-to-hire opportunity with long-term potential

• Structured training period

• Transition to a stable 1st shift schedule after training

Apply today to take the next step toward a permanent position in a production environment!

Steel toe shoes and 3+ months in Manufacturing 

Now Hiring! SHE Specialist  Day Shift

ResourceMFG is hiring an enthusiastic SHE Specialist to join our dynamic team at a top-notch local facility. Experience needed – 3-7 years! Enjoy competitive pay, benefits and free online training to supercharge your career journey!

Apply now and find out why 8 out of 10 associates would tell their friends and family ResourceMFG is a great place to work!

“Plain and simple ResourceMFG is a good company to work for!” ResourceMFG Associate, Davidson

As a ResourceMFG Production Associate We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

Job Requirements

• Bachelor’s degree in environmental health & safety, environmental science, engineering, or a related field.
• 3–7 years of hands-on EHS experience, preferably in a manufacturing or industrial environment.
• Demonstrated experience writing, implementing, and maintaining EHS procedures.
• Working knowledge of Cal/OSHA regulations, California hazardous waste requirements DTSC, SCAQMD and NFPA.
• Experience supporting or interfacing with CUPA inspections and programs (e.g., hazardous waste, CERS/HMBP).
• Experience using electronic EHS management systems for incident reporting and action tracking.
• Strong interpersonal skills with the ability to collaborate effectively with hourly employees and the management team.

Job Responsibilities

• Support implementation of site-level SHE programs to mitigate risk to people, property, and the environment.
• Develop and implement SHE procedures and work instructions aligned with corporate standards and regulatory requirements.
• Maintain a strong on-the-floor presence, including routine site walks, observations, and employee engagement.
• Provide EHS technical support across safety, environmental compliance, ergonomics, industrial hygiene, and occupational health topics.
• Support incident reporting, investigations, and corrective action tracking using Benchmark Gensuite and eCompliance systems.
• Assist with tracking and reporting SHE performance metrics, including injury/illness data and environmental compliance metrics.
• Support California hazardous waste compliance in alignment with DTSC (Title 22) requirements and local CUPA oversight, including generator practices, labeling, accumulation areas, inspections, training support, and coordination of manifests/shipments as applicable.
• Assist with closure of third-party recommendations (e.g., Travelers and other insurers).
• Support delivery of SHE training, toolbox talks, and employee awareness activities.
• Maintain working knowledge of applicable Cal/OSHA, EPA, DTSC, SCAQMD, CUPA, stormwater, wastewater, NFPA and local requirements and support site compliance efforts.
• Collaborate with HR on Workers’ Compensation coordination, employee safety issues, and related programs.

Working for ResourceMFG If you’re looking for a job in manufacturing, ResourceMFG specializes in you! We’re part of Employbridge, the nation’s largest industrial staffing company with 30 years in business. Meaning we have hundreds of open jobs with top employers nationwide. A company that treats you like family, we’re committed to providing equal opportunities to all and ensuring you have a healthy and safe work environment, fair pay and the tools to succeed and grow. This includes a personal recruiter assigned to you, FREE online training for associates who complete 80 work hours, on-time pay and other benefits.

Production / Assembly Line Associate
Location: Riverdale, IL
Pay Rate: Starting at $16.60/hour
Shifts Available:

• 1st Shift: 7:00 AM – 3:00 PM

• 2nd Shift: 3:00 PM – 11:30 PM

Job Summary:
We are currently seeking reliable and motivated Production/Assembly Line Associates for a manufacturer of laundry and cleaning products in Riverdale, IL. This position involves working in a fast-paced production environment and supporting various stages of the manufacturing and packaging process.

Key Responsibilities:

• Packing and picking finished products

• Palletizing products for shipment

• Making and assembling boxes

• Labeling and capping containers

• Assisting on chemical production and/or filling lines

• Maintaining clean and organized work areas (good housekeeping practices)

• Following safety and quality standards at all times

Requirements:

• Ability to work in a fast-paced manufacturing environment

• Ability to work 8, 10, or 12-hour shifts as needed

• Comfortable working around chemical production processes

• Strong attention to detail and safety

• Dependable and punctual

• Willingness to be on-call during a 90-day assignment

Why Work With Us:

• Competitive starting pay

• Multiple shift options

• Opportunity to gain experience in manufacturing and production

Apply today to join a growing team in a stable manufacturing environment!

Steel toe shoes 

Material Handler/Forklift Driver

Work Schedule: Multiple shifts needed, all overtime is mandatory which includes 8, 10, and 12 hour shifts as well as weekends

Job Description: Supply all work stations with material needed to run including empty containers for finish product. Put finished product in designated area with the correct labels. Empty trash and dumpsters when needed into compactor. Other duties may be assigned.   

Dress Code Policy: Jeans, t-shirts, basketball shorts, fingertip length shorts, capris, leggings, and sweatpants are permissible. Rubber soled shoes only, steel toed boots are not required. Tank tops or shirts that cut off at the shoulder are not allowed. Dangling jewelry is not allowed. Long hair must be pulled back.

First Day Information: Lunches are paid so you cannot leave the premises, bring a lunch and a non-spill drink.

FKL

• Performing inbound, interim and final checks on materials and products;

• Assessing products based on dimensions, finish and specifications, both visually and with measuring equipment;

• Identifying and reporting deviations, including drawing up NCRs, quality alerts and corrective actions;

• Advising quality engineers and production on solving quality deviations and implementing improvements;

• Preparation of product quality reports and ensuring complete and timely quality documentation;

• Providing training to production personnel on quality procedures and measurement instructions;

• Contributing to continuous improvement and optimizing work processes;

• Ensuring compliance with safety, health and safety, environmental and quality procedures.

Must have automotive experience with TS16949

• 2–5 years of experience in quality control or a similar role;

• Experience in reading technical drawings;

• Knowledge of dimensions, tolerances, measurement and control techniques;

• Experience with machining and/or welding of high-precision metal products is an advantage;

• Analytical, result-oriented and able to set priorities.

• 2–5 years of experience in quality control or a similar role;

• Experience in reading technical drawings;

• Knowledge of dimensions, tolerances, measurement and control techniques;

• Experience with machining and/or welding of high-precision metal products is an advantage;

• Analytical, result-oriented and able to set priorities.

The candidate must have automotive experience with TS16949, familiar with APQP, strong Microsoft skills – excel, word, PowerPoint.

Hiring Packers in Millersburg Ohio

Entry Level – No Experience Required

 All shifts available with OVERTIME

Job Description

• Packages and labels finished products
• May assist in other areas as needed

Check out these benefits:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Health, Life, Dental and Retirement available
• Free Career training and certifications
• FREE ONLINE skills training

Apply today, interview tomorrow! 

We strongly encourage our Military Personnel and Veterans to Apply!

 Qualifications

• Ability to work in a moderate paced and multi-task environment.
• Attention to detail
• Maintains positive team environment.

ResourceMFG is seeking a Front Desk Coordinator for a fast-paced, professional office environment in Bedford, IN. This role is best suited for someone with prior customer-facing or administrative experience who is confident communicating with clients, maintains strict confidentiality, and consistently presents a polished, professional demeanor. Reliability, strong phone etiquette, and attention to detail are essential for success in this position.

Schedule & Pay:

• Monday–Friday, 8:30 AM – 5:00 PM
• Saturdays required during peak season
• Pay rate: $20/hour

Responsibilities:

• Greet clients and manage front desk operations
• Answer and route incoming phone calls with professional phone etiquette
• Schedule and manage client appointments
• Perform general administrative tasks, including filing and document organization
• Maintain confidentiality of sensitive client information
• Assist office staff as needed during peak season
• Utilize office software including QuickBooks

Requirements:

• Professional demeanor with strong interpersonal and communication skills
• Customer service and phone etiquette
• Dependable, organized, and detail-oriented
• QuickBooks experience
• Microsoft Excel and Word proficiency

Apply now!

ResourceMFG is hosting a Manufacturing Associate Hiring Event Wednesday, January 28nd, Wednesday, February 4th 10am-1pm. Mentor Library 8215 Mentor Ave, Mentor, OH 44060 . 

Various shifts available!

Date: Wednesday, January 28th,2026 10am-3pm  

Location: Address: Mentor Library 8215 Mentor Ave, Mentor, OH 44060

Time: 10:00am – 1:00pm

Apply Today!

ResourceMFG is Hiring for a Prestigious Energy Client in Durham!

Position: Switchgear Technician – 1st Shift

Pay: $18.50/hr

ResourceMFG is seeking skilled, motivated professionals to join a leading energy client in Durham that’s shaping the future of sustainable power. If you want to be part of an innovative team making real-world impact, this role could be an excellent fit.

Summary

This entry-level position is responsible for the assembly and fabrication of switchgear. Duties include building the structure, wiring back pans and doors, assembling the bus, and installing breakers. The role focuses on assembling switchgear from component level to completed product, including low-voltage and control panels.

Knowledge, Skills & Abilities

• Ability to measure accurately to 1/16"
• Ability to verify work meets specifications using instructions, drawings, and engineering documents
• Work independently and cooperatively to support smooth assembly operations
• Ability to read and execute electrical schematics and engineering sketches (preferred)
• Troubleshooting skills
• Assist in assembly and fabrication of the mechanical bus portion of the switchgear build

ResourceMFG is Hiring for a Prestigious Energy Client in Durham!

ResourceMFG is currently seeking passionate, skilled professionals to join the team of a prestigious client in Durham that’s helping to shape the future of energy. If you're ready to be part of an innovative company with a strong mission and real-world impact, this could be the perfect opportunity for you.

🏭 Assembly Technician – Durham, NC

Schedule: Monday – Friday | 6:00 AM – 2:30 PM

Pay Rate: $18.50 per hour

Responsibilities of an Assembly Tech

• Perform final assembly of products according to specifications and quality standards
• Inspect finished products for defects to ensure they meet customer requirements
• Operate hand and power tools to complete assembly tasks safely and efficiently
• Read and interpret blueprints, diagrams, and work instructions
• Collaborate with team members to maintain an efficient and organized workflow
• Maintain a clean and orderly work area
• Report equipment or material issues to supervisors promptly
• Participate in continuous improvement initiatives to enhance productivity and product quality

Why work for ResourceMFG/ProLogistix as an Assembly Tech

• Great places to work
• Weekly pay periods
• Unlimited referral bonuses
• Health / Dental / Vision Benefits offered 
• FREE career focused online classes 

Apply Today!

ResourceMFG is Hiring for a Prestigious Energy Client in Durham!

ResourceMFG is seeking skilled, motivated professionals to join a leading energy client in Durham that’s shaping the future of sustainable power. If you want to be part of an innovative team making real-world impact, this role could be a great fit.

Position: MIG Welder – 1st & 2nd Shift

Pay: $19–$21/hr DOE

Job Summary

This entry-level role supports fabrication and on-time production of parts. Responsibilities include MIG welding and grinding panels, fitting and tightening pipes, cutting materials using various machines, and performing basic welder maintenance. The focus is producing high-quality steel parts efficiently and accurately.

Job Duties & Responsibilities

• Follow all safety procedures

• Measure accurately to 1/16"

• Pass a steel MIG welding test

• Work effectively in a fast-paced, team-oriented environment

• Operate saws and cutting machines and select proper materials

• Verify work meets specifications using instructions, drawings, and engineering documents

• Work independently and collaboratively to support smooth assembly operations

• Read and execute blueprints and engineering sketches

• Troubleshoot issues as needed

• Operate welders and replace gas cylinders or parts

• Use hand and power tools safely

• Weld and grind panels per engineering requirements

• Perform additional duties as needed based on business needs

ResourceMFG is looking for a Day Shift Material Handler in Lansing

$100 Unlimited Referral Bonuses

Day Shift

$17.00 per hour

Forklift Operator duties include, 

• Move product throughout the warehouse
• Load and Unload shipments
• Operate sit down propane fork lift
• Other duties as assigned 

 ResourceMFG Offers:

• Weekly pay
• Paid training
• Medical benefits
• Free online courses
• $100 Unlimited Referral Bonuses & More

Forklift Operator in Van Buren, OH

Location: Van Buren, OH

Shift: 2nd Evenings and 1st shift mornings

Pay:$17-20/hr 

Position Overview: We are seeking experienced Forklift Operators to join our team. The ideal candidate will have at least 3 years of forklift operating experience and a strong attention to detail.

Key Responsibilities:

• Safely operate forklifts to move materials within the warehouse
• Pull and pack parts accurately and efficiently
• Load and unload trucks with precision
• Maintain a clean and organized work area
• Adhere to all safety protocols and procedures

Requirements:

• Minimum of 3 year of forklift operating experience
• Strong attention to detail and organizational skills
• Steel-toed boots required
• Basic computer skills

Benefits:

• Competitive pay at $16-18 per hour
• Comprehensive medical plans available
• Attractive referral bonus program
• Access to FREE online college courses

Forklift or Pallet Repair

ResourceMFG is looking for a dependable Maintenance Technician in Bloomington, IN! The Maintenance Technician will help keep the facility and production equipment running safely and efficiently. This role is hands-on and varied—perfect for someone who enjoys problem-solving, preventative maintenance, and working in a team-oriented manufacturing environment.

Job Duties:

• Construct, install, repair, and perform preventative maintenance to all building facilities and factory/production equipment
• Assist with grounds maintenance as needed
• Assist with the upkeep of facilities as needed
• Perform preventative maintenance and prepare/submit maintenance reports
• Assist with maintaining parts and tools inventory
• Assist with installing new production equipment as needed
• Assist with the training and supervision of production employees assisting maintenance department as needed
• Adhere to all safety requirements
• Other duties/tasks as assigned

Requirements:

• Minimum of 3 years experience in maintenance/facilities
• Strong understanding of maintenance processes and methods
• Working knowledge of tools, common appliances, and devices
• Ability to maneuver in, around, under, and about factory equipment on a regular basis
• Ability to stand, walk, lift, bend, and squat for extended periods of time
• Strong interpersonal skills
• Attention to Detail
• Time management
• Critical thinking and problem solving
• Microsoft Office

Machine Operator – Metal Fabrication (Temp-to-Hire)

Location: Saint Paul, MN
Schedule: Monday–Thursday, 5:00 AM – 3:30 PM (Some positions may operate 6:00 AM – 4:30 PM; final schedule provided at hire)
Employment Type: Full-Time, Temp-to-Hire
Pay Rate: $22.00 – $28.00 per hour (Depending on experience)

About the Opportunity

Our staffing agency is currently seeking a skilled and dependable Machine Operator to join a reputable metal fabrication company in Saint Paul. The facility is a full-service fabrication environment specializing in roll bending, cutting, forming, welding, and custom metal production. This is an excellent long-term opportunity with a stable, growing organization offering hands-on work, technical variety, and strong career potential.

Position Summary

The Machine Operator will work within a fabrication and production environment, operating various forms of metalworking equipment. This position includes machine setup, production operation, quality inspections, and basic equipment maintenance. Ideal candidates will have fabrication experience, strong mechanical aptitude, and the ability to work independently while supporting a small, skilled team.

Equipment may include:

• Roll Bending Machines

• Tube Benders

• Shears

• Brake Presses

• Saws

• Plate Rolling Machines

Key Responsibilities

• Operate and set up fabrication machinery, including roll bending, tube bending, shearing, brake forming, sawing, and plate rolling equipment.

• Assist with programming or adjusting machine settings to meet production specifications.

• Read and interpret blueprints, drawings, and work orders to determine proper setup and material requirements.

• Perform machine setup, run production parts, and complete routine maintenance tasks.

• Inspect finished products using appropriate measuring tools to ensure accuracy and quality.

• Maintain production logs and report operational issues to supervisors promptly.

• Coordinate workflow with team members to ensure efficient production processes.

• Follow all safety policies and maintain a clean, organized workspace.

• Support a collaborative, quality-driven production environment.

Qualifications

Required:

• High school diploma or GED

• Ability to read and interpret blueprints

• Basic math skills, including arithmetic, algebra, and geometry

• Understanding of metal fabrication processes and material types

• Strong attention to detail and quality standards

• Self-motivated, reliable, and capable of working independently

Preferred:

• 1+ years of experience in a metal fabrication, machining, or industrial manufacturing environment

• Experience setting up or programming bending or rolling machines

• Familiarity with custom metal fabrication workflows

• Basic mechanical troubleshooting ability

Compensation & Benefits (When Eligible Upon Conversion)

• Pay: $22.00 – $28.00 per hour (Based on experience)

• Profit-sharing program

• 401(k) with employer match

• Medical and dental coverage

• Health Savings Account (HSA)

• Life insurance

• Paid time off

• Stable, long-term career path

• Four-day work week (Monday–Thursday)

• Early start/early end schedule with extended weekends

• Tight-knit, skilled production team

Work Environment

• Active fabrication shop environment

• Requires standing for long periods and lifting up to 50 lbs

• Exposure to moderate noise, machinery, and materials handling

• All required PPE provided; strong focus on employee safety

#NowHiring

NOW HIRING!!!! PROLOGISTIX HAS GENERAL LABOR POSITIONS IN SENATOBIA, MS STARTING ASAP!!!

We have 1st and 2nd shifts available, must be able to work 12 hr shifts!

1st shift 3:45am-4pm – $14/hr

2nd shift 3:45pm-4am -+ $14.50/hr

RESPONSIBILITIES:
•Responsible for performing packing tasks to ensure all company procedures are met and production is operating efficiently.
•Responsible for communication with other departments to ensure efficient operation of the production process.
•Performs related duties as assigned by supervision
•Responsible for meeting all quality, sanitation, and production standards

PHYSICAL DEMANDS

•Occasionally required to lift, carry, push, and pull up to 40 pounds
•Required to bend, reach, stoop, lift, push and pull frequently
•Required to work in plant environment
•Perform light to medium duty work tasks

QUALIFICATIONS

•Ability to read and understand documents and labels related to cleaning and sanitizing
•Ability to communicate, write legibly, and speak in English
•Ability to perform each essential function satisfactory.

PERSONAL PROTECTIVE EQUIPMENT

•Safety eyewear will be required
•Protective clothing, hair net and gloves are required
•Additional PPE may be required based on tasks being performed and location within the facility.

MUST HAVE HIGH SCHOOL DIPLOMA OR GED AND PASS DRUG SCREEN!!

APPLY TODAY, START TOMORROW!!!!

Job Posting: Team Lead Second Shift

Location: Toledo, OH Join Our Team at TK!

Join Our Team at Thyssen Krupp!

Are you looking for a stable, rewarding career in leadership? A company in Toledo,OH is hiring Team Leads to support our growing operations. 

The key responsibilities of the Supervisor/Team Lead include, but are not limited to, the following:

• Oversee the containment process, responsible for the laborers and the inspection of customer products for the assigned tables or workstations

• Must lead by example, be organized, and practice good housekeeping skills in all areas of the facility

•Ensure all employees work safely and in accordance with company health and safety policies and procedures Manager

•Responsible for the coordination of shift start activities prior to start time (table requirements, paperwork, etc. Ensure appropriate tools and materials are available for completion of jobs

•Provide on-the-job training for any new work instructions when applicable•   

What We Are Looking For:

• High school diploma or equivalent preferred
• Ability to lift up to 50 lbs and stand for extended periods
• 3 Years of previous management or Supervisory
• Strong attention to detail
• Forklift needed!
• Hours are 430P-230A Mon- Sat (Sun as needed)

Team Lead forklift required