Now Hiring!

RF Alignment Specialist – 2nd Shift

El Cajon, CA

Build Your Future: Solid Pay. Strong Team. Where Your Success Matters. No need to spend your time searching for “manufacturing jobs hiring near me” because ResourceMFG is NOW HIRING RF Technician in your area. Benefit from competitive weekly pay, solid benefits, and the chance to level up your skills. 

We Require Our Customers to Offer:

• Safe and clean work environment
• Employee focused workplace
• Safety programs and training

Role Summary

Precisely align, tune, and calibrate RF/microwave circuits, filters, oscillators, and integrated modules to meet performance targets (gain flatness, noise figure, phase noise, VSWR, insertion/return loss). Collaborate with Engineering to optimize procedures and improve yield.

Key Responsibilities

• Precision Alignment & Tuning: Perform detailed alignment of RF chains and subassemblies using VNAs, spectrum analyzers, and power meters; adjust trimmers, bias points, and couplers to bring units into spec.
• Calibration & Verification: Calibrate fixtures and verify measurement uncertainty; run S-parameter sweeps and limit tests; document calibration status.
• Performance Optimization: Optimize parameters such as gain, P1dB, noise figure, phase noise, and return loss across temperature/lot variance as required by the traveler.
• Failure Analysis Support: When a unit cannot be brought into spec, capture data, identify likely fault domains, and partner with RF Technicians/Engineering for root cause and rework plans.
• Procedure Development: Provide feedback to refine alignment procedures, fixtures, and golden-unit references; maintain configuration control of align-steps.
• Documentation & Traceability: Record all adjustments, test plots, and as-found/as-left data in the traveler/ME route; ensure audit-ready records.

Core Qualifications

• Education/Experience: 2–7 years aligning/tuning RF/microwave products (defense/aerospace preferred).
• Technical Skills: Deep fluency with vector network analyzers (S-parameters), spectrum analyzers (phase noise, spurs), fixture calibration (SOLT/TRL), and RF troubleshooting fundamentals.
• Standards/Quality: Comfortable operating under formal test procedures and strict documentation/quality systems (e.g., AS9100).
• Dexterity/Detail: Excellent fine-motor work for component adjustments; ability to hold tight tolerances and repeat results across builds.

Immediate Opportunity!  Are you a quick learner, good at performing a variety of tasks?  We are NOW HIRING General Laborers to work at an excellent agriculture facility. Competitive and reliable weekly pay, benefits, a safe workplace, and all-around great people.

• Position requires the flexibility to work 6 days a week 12hr shifts 7am-7pm
• Pay starts at $12.00/hr

As a ResourceMFG General Laborer We Offer You:

• Competitive weekly pay (Direct Deposit or ATM Debit Card available)
• Unlimited Referral Bonuses
• Access to medical, dental, and vision benefits plus retirement plan
• AT&T cell phone discounts available
• Free Online Courses through Penn Foster including:
• Access to free mental health services
• Access to Working Advantage discounts and offers
• Life assistance resources. National and state offerings for food, utilities, housing, mental health and much more

General Laborer Responsibilities:

• Remove and stack bags of product
• Keep work area clean and organized
• Perform and follow all safety procedures outlined in company written procedures.
• Work cooperatively with management team and co-workers
• Other general labor duties as assigned

Ability to work overtime

Steel toe boots required

ProLogistix is seeking a Blow Molder Machine Operator for a leading plastic container manufacturer in Tukwila. This is a great long-term opportunity with consistent hours, growth potential, and hands-on technical work. 

Pay: $25/hr | Schedule: 11:00 PM – 7:30 AM, Monday–Friday (mandatory OT required)

*Candidates must be available to train on 1st or 2nd shift*

Job Responsibilities

• Ensure compliance with all corporate and plant safety standards, as well as regulatory requirements.
• Operate blow-mold machines (wheel, reciprocating, or shuttle) to produce high-quality bottles.
• Conduct audits, weights, and quality checks to maintain production standards.
• Follow all quality control procedures and blow-mold processing guidelines.
• Troubleshoot and perform minor repairs on blow-mold machinery and related equipment.
• Make machine adjustments to meet product specifications.
• Repair or replace pneumatic and hydraulic lines.
• Assist with preventive maintenance and mechanical changeovers (molds, necks, blow pins, etc.).
• Grind excess bottles and materials.
• Identify and resolve process issues promptly.
• Complete maintenance request forms and document equipment repairs.
• Train other blow-mold employees as needed.
• Prepare and document daily production reports (rejects, regrinds, line efficiencies, etc.).
• Perform other duties as assigned by management.

Benefits of Working with ProLogistix

• Weekly pay via direct deposit or pay card
• Medical, dental, and vision insurance
• Free online skills training to advance your career
• Referral bonuses
• Overtime opportunities
• Safe, supportive work environment
• Career advancement through certification programs and training

Now Hiring! RF Technician 2nd Shift

Build Your Future: Solid Pay. Strong Team. Where Your Success Matters. No need to spend your time searching for “manufacturing jobs hiring near me” because ResourceMFG is NOW HIRING RF Technician in your area. Benefit from competitive weekly pay, solid benefits, and the chance to level up  your skills. 

Apply with us and find out why Manufacturing workers are 3.5x more likely to want to work for ResourceMFG than other staffing companies.

“I have had a great overall experience working with ResourceMFG.” ResourceMFG Associate, Jose

We Require Our Customers to Offer:

• Safe and clean work environment
• Employee focused workplace
• Safety programs and training

Role Summary

Build, test, troubleshoot, and repair RF assemblies and subsystems used in microwave products. Partner with Engineering and Quality to meet performance specs and on-time delivery.

Key Responsibilities

• Assembly & Rework: Assemble electro-mechanical RF modules and cable harnesses to print; perform component-level rework per IPC standards.
• Test & Verification: Set up and execute bench tests using spectrum analyzers, network analyzers (S-parameters), power meters, and signal generators; record results per controlled procedures.
• Troubleshooting: Diagnose to board/component level (PLL/oscillators, filters, amplifiers), isolate faults, and implement corrective actions.
• Calibration Support: Assist with routine instrument checks and verify measurement setups for accuracy and repeatability.
• Documentation: Complete travelers, test records, nonconformance reports, and ECO rework logs accurately and on time.
• Continuous Improvement: Provide feedback to engineering on yield issues; contribute to root-cause analysis and process improvements.

Core Qualifications

• Education/Experience: 2–5 years hands-on RF bench experience in manufacturing or depot repair.
• Technical Skills: Proficiency with RF test equipment (spectrum/network analyzers, power meters), soldering/rework, reading schematics and RF block diagrams.
• Quality/Standards: Familiar with AS9100/QA documentation and IPC/J-STD workmanship practices.
• Soft Skills: Attention to detail, documentation discipline, and cross-functional communication with QE/ME/Design Eng.

Now hiring for Packers and General Warehouse in Union,MO and in Washington,MO 

Long term career opportunities with weekly pay and benefits!

1st and 2nd and 3rd shifts available 

Pay ranges are from $15.45 to $20.00 per hour

Packer job duties include but not limited to:

• Packing folders
• Taping boxes
• Keeping a clean work station
• Feeding machine with product
• Building Pallets  
• Other duties as required

ResourceMFG offers:

• Weekly pay
• Benefits
• Free online courses to further your career
• Unlimited $100 referral bonuses!

Apply today or open interviews Mon-Fri 9am-2:30pm

#nowhiring

Ability to lift up to 50lbs

Ability to stand for 8+ hours

Ability to perform repetitive motions, including grasping, bending, stooping

Steel toed boots or shoes

Ability to work in non climate controlled setting (hot in summer/cold in winter)

#nowhiring

Seeking Welders in Canton, OH 

Title: MIG Welder

Location: Canton, OH

Type: Temp to Hire

Shift: 1st and 3rd available

Job Description: Utilizing MIG Welding on steel, you will be:

• Reading blueprints & work instructions
• Weld T-joints Lap joints
• Proficient at Starts & Stops with no strike marks  

#NowHiring 

We encourage active military and veterans to apply!

Benefits include:

• Medical
• Dental
• Vision
• Retirement Program
• Referral Bonus
• Provide free online courses to advance your career after 80 hours

#NowHiring

Hiring Assemblers in Canton

We are seeking candidates who are mechanically inclined and good with hand and power tools to join our team assembling product to meet company deadlines.  

       RESPONSIBILITIES:

• Responsible for assembly of products from assembly instructions 
• Responsible for prepping parts
• Building sub-assemblies
• Building pump/motor assemblies.
• Able to lift up to 40lbs 

       REQUIRED SKILLS

• Skilled at using hand tools 
• Able to read a tape measure
• Capable of following written and verbal instructions
• Ability to follow assembly instructions

#nowhiring

We strongly encourage our military personnel and veterans to apply now!

As a ResourceMFG Associate We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

#nowhiring

ResourceMFG is URGENTLY hiring a Facilities Maintenance Tech with 480v experience in East Tulsa!

Schedule: Mon-Thu 6-4:30pm Temporary Position – 2-3 month assignment

Pay: Depending on Experience – Contact me with your pay requirements

JOB DETAILS

Thermoplastic vacuum forming company with plastic vacuum forming machines, a full-service mold/tool shop, machine shop, secondary assembly and finishing areas.  This position will be responsible for trouble-shooting and repairing thermoforming, CNC, and support equipment.

Will maintain and repair all portions of the buildings and grounds and additional maintenance support as assigned.

Skills Required

• 240/480 voltage 3 phase electrical experience
• 110 voltage knowledge
• Fagor CNC control knowledge
• Servo drives experience
• PLC (programmable logic control) experience
• Air compressor and vacuum pump repair 
• Forklift maintenance
• Plumbing
• Welding
• Basic Excel Spreadsheet Knowledge
• Support Facilities Preventative Maintenance program
• Multi-facility maintenance

• Steel toe
• Safety Sensitive Position
• climbing and crawling on machinery
• Standard bending, stooping, standing on concrete
• Lifting up to 50lbs

ResourceMFG is hiring Chemical Operator Trainees! 

Location: Lafayette

Shifts: 6:00am-6:00pm OR 6:00pm-6:00am

Pay starts: $17.50, potential for raises at 90 and 180 days

Work Environment: Safety first, Quality over Quantity

Job Summary:

• Documents work according to standards
• Learns and executes basic job operations
• Learns relevant policies and procedures and applies them to the job
• Reads, understands and follows the Safety and Environmental cautions provided with the Batch Production record, MSDS or other safety and environmental guidance
• Maintains facility housekeeping to be inspection ready at all times
• Performs transactions in SAP
• Completes building inspections and documents findings accurately
• Assists Evonik operators for processing tasks

At ResourceMFG Associate We Offer You:

• Weekly Pay (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

Job Requirements:

• High school diploma or GED, and valid driver's license and driver privileges

• 1 year manufacturing experience OR related pharmaceutical experience preferred but not required

• Attention to detail

• Strong trouble shooting and some mechanical aptitude are helpful

• Be flexible to work either Day or Night shift

• Able to lift up to 50 pounds from floor to waist without assistance on a routine basis

• Potentially hazardous conditions involving the use of acids, caustics, other hazardous chemicals, and potential allergen

ResourceMFG is hiring Forklift Operators! 

Location: Lafayette

Shifts: 6:00am-6:00pm OR 6:00pm-6:00am

Pay starts: $17.50, potential for raises at 90 and 180 days

Training Required on 8-hour days for up to 6 weeks (7am-4pm)

Work Environment: Safety first, Quality over Quantity

Job Summary:

• Work with SAP system when moving material
• Inspect forklift daily
• Documents work according to standards
• Learns and executes basic job operations
• Learns relevant policies and procedures and applies them to the job
• Reads, understands and follows the Safety and Environmental cautions provided with the Batch Production record, MSDS or other safety and environmental guidance
• Maintains facility housekeeping to be inspection ready at all times
• Performs transactions in SAP
• Performs raw material movements throughout the plant site
• Completes cycle counts of raw materials
• Helps prepare materials for shipments
• Helps investigate inventory discrepancies
• Completes building inspections and documents findings accurately
• Assists Evonik operators for processing tasks

At ResourceMFG Associate We Offer You:

• Weekly Pay (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

Job Requirements:

• High school diploma or GED, and valid driver's license and driver privileges

• 1 year manufacturing experience OR related pharmaceutical experience preferred but not required

• Attention to detail

• Strong trouble shooting and some mechanical aptitude are helpful

• Be flexible to work either Day or Night shift

• Able to lift up to 50 pounds from floor to waist without assistance on a routine basis

• Potentially hazardous conditions involving the use of acids, caustics, other hazardous chemicals, and potential allergen

Medical Assemblers Needed in Arden Hills!

We are looking for people that want to have a rewarding career building life saving devices for Boston Scientific in Arden Hills (Located near Roseville)

1st Shift: $18.00 Per Hour

2nd Shift: $20.25 Per Hour

3rd Shift: 21.50 Per Hour

Temp to Hire

Shifts Available:

• 1st Shift 6:00am-2:00pm Monday – Friday, with overtime as needed
• 2nd Shift 2:00pm-10pm Monday – Friday, with overtime as needed
• 3rd Shift 10:00pm-6:00am Sunday – Thursday, with overtime as needed

Assembler Duties will include but are not limited to: 

• Medical Assembly
• Clean room assembly
• Small parts
• Scanning
• Labeling packages, assemblers, repairs and inspects
• Other tasks assigned

Job Responsibilities

• Follow safety guidelines
• Follow standard work instructions as assigned
• Perform hands-on tasks
• Maintain clean and organized workspace
• Troubleshoot issues
• Meet production standards
• Work in a team environment
• Accurate recordkeeping and inventory documentation
• Inspection of product

As a ResourceMFG Assembler We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

 Apply Now!

• Ability to read/understand and take direction in English
• Attention to detail
• Able to use basic hand and power tools
• Basic Math
• Mechanical aptitude
• Hand eye coordination and dexterity
• Basic computer skills
• Complete Drug Screen and Federal Background Check
• High School Diploma or GED

• Perform hands-on tasks
• Assemble small part medical devices in clean room environment
• Accurate recordkeeping and inventory documentation
• Inspection of product

On Site Perks

• Paid Lunches
• Onsite Fitness Center
• Onsite Cafeteria

ResourceMFG Offers:

• Weekly Pay
• Paid training
• Medical, Dental, Vision and 401K
• Mobile App
• Free online courses
• Discounts and more

• Able to use basic hand and power tools
• Basic Math
• Basic computer skills
• Ability to read, speak, and take directions in English
• Ability to follow GMPs 
• Complete Drug Screen and Federal Background Check
• High School Diploma or GED

Resource MFG is Hiring in Lexington KY!

Pay: $17.50 per hour

Shift: 5:00a-3:30pm Mon – Thurs, OT as needed

Buffing product for smooth finish after firing in Kiln process, must be able to work in dusty environment

Machine Operator, Kiln Technician

Must be able to lift up to 50lbs, steel toes required 

Benefits available through Resource MFG!

warehouse, picking, order packing, logistics

Why choose us?

• Access to our Better Worklife Academy
• Free Online Courses Through Penn Foster
• Weekly Pay
• Health, Dental & Vision Benefits for you & your family
• Safety is Top Priority 
• Opportunity for Career Advancement 

Apply today!

Resource MFG is Hiring in Frankfort!!

STARTING MONDAY 12/15

Pay: $14 per hour

Shift: 7a-3:30pm Mon-Fri

Picking and Packing product for shipments, refurbishing electronic products, prepping shipments for loading, unloading product for inventory using RF Scanner

Must be able to lift up to 50lbs, No steel toes required 

FORKLIFT OPENINGS Available if you have experience – $16.50 per hour

Benefits available through Resource MFG!

warehouse, picking, order packing, logistics

Why choose us?

• Access to our Better Worklife Academy
• Free Online Courses Through Penn Foster
• Weekly Pay
• Health, Dental & Vision Benefits for you & your family
• Safety is Top Priority 
• Opportunity for Career Advancement 

Apply today!

Welder – Yamaha ??

Location: Newnan, Georgia

?? Pay: $21

?? Schedule: M-F, 2:30pm to 10:30pm

Job Description: Yamaha is seeking a skilled Welder to join our manufacturing team. The ideal candidate will be experienced in welding processes such as MIG, TIG, or Stick (depending on your facility’s needs) and comfortable working in a fast-paced production environment. This role is responsible for producing high-quality welds, reading blueprints, and ensuring all work meets Yamaha’s quality and safety standards.

ResourceMFG is hiring Forklift Drivers in Lexington and Georgetown! 

$19 FOR 1ST; $20 FOR 2ND SHIFT

1st shift openings! 

• Sit Down, electric forklift
• Must be willing to work in environment where you are on and off forklift all day
• Loading and unloading shipments, fast-paced! 

ResourceMFG offers great perks!

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan

Grow Your Manufacturing Career with Us! Let America’s largest manufacturing staffing company help you find your next machine operator job. ResourceMFG is actively hiring with work starting immediately. Offering competitive pay, benefits and the opportunity to gain new skills and experience. This is one job you don’t want to miss.

Get to work with the only staffing company offering FREE online training after you complete 80 work hours! Join our team today!

We Require Our Customers to Offer:

• Safe and clean work environment

Resource MFG is hiring in Winchester KY! 

6pm-6am – $17.60 per hour

6am-6pm –  $16.80 per hour

Temp to Hire

• basic tasks relating to weighing, transferring, mixing, and processing of raw material to create a finished good, 
• production tasks such loading machines, using hand tools, perform basic calculations

• Accurately complete all applicable documentation pertaining to completed tasks; in particular, batch records, forms, and cleaning records.

Why choose us?

• Access to our Better Worklife Academy
• Free Online Courses Through Penn Foster
• Weekly Pay
• Health, Dental & Vision Benefits for you & your family
• Safety is Top Priority 
• Opportunity for Career Advancement 

Apply today!

FORKLIFT OPERATOR IN SAN CLEMENTE
Day Shift 7am-4pm

Drive Your Career Forward – Join Us Now

Job Responsibilities:

• Follow safety guidelines
• Follow standard work instructions as assigned
• Perform hands-on tasks
• Troubleshoot equipment issues
• Meet production standards
• Storing, moving and managing materials
• Use of handheld scanners or on-board computers
• Follow warehouse systems and processes
• Potentially load and unload trailers

#nowhiring

Job Requirements:

• Minimum of 3-6 months of Forklift experience
• Knowledge of Forklift Safety Guidelines
• Lift up to 20-50 lbs, sit, stand, bend and reach
• Experience in warehouse or distribution center environment
• Basic computer skill

Phoenix Steel Company Hiring QC Inspectors. • worksite – Phoenix – 420 S 19th Ave • Schedule – second shift, training on 1st shift for a week or two, second shift is 2pm-11pm or 4pm to 3am • Workdays – Monday through Friday and Saturday’s as needed • Experience – We need an experienced QC Inspector, CWI certification is a plus but not required at this time. • Starting pay – $28-$30 based on experience. • Contract to hire position after 90 days. Position Value Proposition Working for a world class leader in building structures and bridges, a Steel QC Inspector brings his/her expertise and knowledge in fabrication to build some of the most complex and high profile projects in the commercial building, bridge and industrial sectors. Critical to the production process, this position inspects and ensures the quality of welds and dimensional accuracy of work performed by production staff. The QC Inspector uses a high degree of proficiency while utilizing full skills of the trade including knowledge of codes and standards to verify that the final product is free of defects and meets the requirements of the contract documents. To perform this job successfully, an individual must be able to perform each core responsibility satisfactorily. Core Responsibilities • Perform dimensional and visual inspection of shop fabrication, which includes final paint inspections, weld preparations and final welds. • Responsible for fabricated materials conforming to drawings, shop standards, specifications and applicable codes. Record and maintain in-process and final inspection records for quality assurance and production control. • Identify and remedy drawing discrepancies with detailers. • Coordinates with customers’ inspectors during inspection phases. • Inform foremen of defects on fabrication. • Assists shop personnel with interpretation of codes, drawings and specifications.

QC Inspectors. – second shift, training on 1st shift for a week or two, second shift is 2pm-11pm or 4pm to 3am • Workdays - Monday through Friday and Saturday’s as needed

• Experience - We need an experienced QC Inspector, CWI certification is a plus but not required at this time. • Starting pay - $28-$30 based on experience. • Contract to hire position after 90 days. Position Value Proposition Working for a world class leader in building structures and bridges, a Steel QC Inspector brings his/her expertise and knowledge in fabrication to build some of the most complex and high profile projects in the commercial building, bridge and industrial sectors. Critical to the production process, this position inspects and ensures the quality of welds and dimensional accuracy of work performed by production staff. The QC Inspector uses a high degree of proficiency while utilizing full skills of the trade including knowledge of codes and standards to verify that the final product is free of defects and meets the requirements of the contract documents.

The Microbiologist is responsible for analytical and microbiological evaluations of all raw, pasteurized, and final products. Always adheres to all United States Department of Agriculture (USDA), Food & Drug Administration (FDA), Association of Official Analytical Chemists (AOAC), Global Food Safety Initiative (GFSI), Good Manufacturing Practices (GMP), safety regulations, as well as company rules.

As a ResourceMFG Microbiologist we offer you:

• Competitive Weekly Pay (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• FREE ONLINE skills training
• AT&T Cell Phone Discounts
• Unlimited referral bonuses for friends and family
• Access to free mental health services
• Access to Working Advantage discounts and offers
• Life assistance resource. National and state offerings for food, utilities, housing, mental health and much more.

Requirements:

Operate all testing equipment including, but not limited to spectrometer, FTIR analyzer, moisture analyzers, pH meter, burets, beta & aflatoxin analyzers, chlorine analyzer, pipettors, and various laboratory testing equipment.
• All equipment is to be operated in a safe, efficient, and sanitary manner.
• Perform daily quality audits and checks on plant floor as assigned.
• Fill out required worksheets and logs, either electronically or paper form in an accurate manner.
• Maintain all results and report in a confidential manner in accordance with the Company Letter of Confidentiality.
• Responsible for maintaining a clean, orderly, and neat work area.
• Must keep laboratories stocked with necessary supplies.
• Responsible for quality related tasks such as certificates of analysis.
• Communication of results to the proper individuals in a timely, confidential, and professional manner.
• Preparation of all solutions and media required in the performance of all laboratory tests.
• Recognize and notify FSQA Supervisor, FS Coordinator, FSQA Manager, and appropriate production supervisors of any unusual results or product defects.
• Perform the necessary re-checks for analytical and microbiological testing.
• Aid in training of new Quality Assurance personnel.
• Assist in the calibrations, troubleshooting, and functionality of lab equipment.

• Must work in a safe, efficient manner and follow all safety procedures including the use of safety equipment.
• Must have the ability to troubleshoot small problems and be able to discern when issues may require input from levels of authority within the corporation. Must be willing to ask for assistance when the process is unclear.

EDUCATION AND/OR EXPERIENCE:
• Bachelor of Science Degree in Dairy Science, Microbiology, Food Science, Chemistry or related field or comparable experience in dairy laboratory testing in five (5) out of the last ten (10) years.

CERTIFICATES, LICENSES, REGISTRATIONS
• Must be able to acquire a Certified Sampler license by the state regulatory agency.
• Must be able to be licensed as Certified Industry Supervisor in accordance with the Pasteurized Milk Ordinance (current edition) and state regulatory agency.

Machine Shop Jobs Now Available!

1st and 2nd shift in Oceanside, CA

Monday-Friday + overtime

• 8am-4:30pm 
• 4pm-12:30am  
• Performance to hire positions 
• $16.50-$18.50/hr.

Assembly/ Production Responsibilities:

• Feed parts to machines 
• Sanding, deburring, polishing metal parts
• Visual inspection and packaging 

As a ResourceMFG Production Associate We Offer You:

• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

• 1+ year manufacturing experience in machine operator or production required
• Required to stand and walk up the full shift
• Ability to work overtime and Saturdays
• Work in a fast pace environment
• Ability to lift up to 50lbs

#nowhiring

We’re Hiring Painter Helper in Lynwood!

Essential Functions & Competencies

• Measure and mix paint and primer components per manufacturer specifications

• Perform surface preparation including composite filling, corrosion removal, sanding, masking, painting, and polishing of helicopters and parts

• Identify and correct paint imperfections such as adhesion issues, blushing, sags, runs, drips, orange peel, solvent pops, pinholes, fisheyes, scratches, wrinkling, and dry spray

• Operate spraying equipment including spray booths, compressors, HVLP spray guns, and mixing equipment

• Read and interpret blueprints, drawings, and geometric tolerances

• Apply basic mathematics (addition, subtraction, multiplication, division, geometry, algebra) for material fabrication calculations

• Ensure compliance with the Company’s DOT Antidrug and Alcohol Misuse Prevention Program

• Maintain regular and predictable attendance

• Lead and coach team members to achieve daily goals

Benefits

• Competitive compensation

• Health, dental, and vision insurance

• Paid time off and holidays

• Opportunities for career growth and advancement

• High school diploma or equivalent required; technical training preferred

• Minimum [X years] of experience in aerospace or industrial painting

• Strong leadership and communication skills

• Ability to work in compliance with FAA and company standards

• Knowledge of hazardous material handling and safety practices

ResourceMFG is Hiring Composite Assemblers in Ogden

Pay $18.00/ hour

Shift 6am-2:30pm, 8am-4:30pm Monday-Friday

Join our team where we craft high-performance bicycles using cutting-edge composite materials. We are passionate about innovation and precision, and we are looking for a detail-oriented technician to support our manufacturing processes.

Composite Assembler Responsibilities

• Prepare composite materials by accurately determining angles, laying out, and cutting pre-preg fabric.

• Operate automated cutting machinery to ensure precision in material length and angles.

• Ply sheets together, aligning material weave angles and assembling them into plied panels.

• Monitor product quality throughout the production process, ensuring compliance with specifications.

• Maintain a safe and organized workspace, adhering to company safety standards.

What We Offer

• Weekly Pay
• Direct Deposit
• Medical, dental and Vision once hired
• Bicycle discounts once hired 

 Apply today!

#nowhiring

• Experience in mold/tooling maintenance, preferably in a manufacturing setting.

• Strong attention to detail and problem-solving abilities.

• Ability to work independently and collaborate effectively within a team.

• Basic computer skills (Excel knowledge preferred).

• Commitment to safety and adherence to standard operating procedures.

Job Description We are seeking a skilled and detail-oriented Processing Line Technician to join our team. This role is responsible for processing parts according to specifications, overseeing line operations, and ensuring compliance with safety and quality standards. Reasonable Accommodations Statement To accomplish this job successfully, an individual must be able to perform, with or without reasonable accommodation, each essential function satisfactorily. Reasonable accommodations may be made to help enable qualified individuals with disabilities to perform the essential functions. Essential Functions Process parts in tanks according to specifications, work orders, and requirements Calculate processing times to ensure accuracy and efficiency Remove, rinse, and immerse parts in baths as required for completion Complete paperwork in accordance with company and processing guidelines Oversee and assist line assistants to optimize throughput Evaluate and log preventative maintenance on the processing line Ensure proper disposal of hazardous waste materials in compliance with regulations Operate a crane safely and effectively Perform other duties as assigned Position Qualifications Competency Statements Accountability – Accept responsibility and account for actions Accuracy – Perform work thoroughly and correctly Applied Learning – Engage in learning activities effectively Oral Communication – Communicate clearly with team members Decision Making – Make sound decisions while following procedures Detail Oriented – Pay close attention to details Ethical Conduct – Demonstrate values and standards consistently Honesty/Integrity – Be truthful and credible in the workplace Initiative – Take proactive steps to solve problems and reach goals Judgment – Formulate sound decisions using available information Organized – Maintain structure and order in tasks and responsibilities Qualifications High school diploma or equivalent required Prior experience in ma

Job Description

We are seeking a skilled and detail-oriented Processing Line Technician to join our team. This role is responsible for processing parts according to specifications, overseeing line operations, and ensuring compliance with safety and quality standards.

Reasonable Accommodations Statement To accomplish this job successfully, an individual must be able to perform, with or without reasonable accommodation, each essential function satisfactorily. Reasonable accommodations may be made to help enable qualified individuals with disabilities to perform the essential functions.

Essential Functions

• Process parts in tanks according to specifications, work orders, and requirements

• Calculate processing times to ensure accuracy and efficiency

• Remove, rinse, and immerse parts in baths as required for completion

• Complete paperwork in accordance with company and processing guidelines

• Oversee and assist line assistants to optimize throughput

• Evaluate and log preventative maintenance on the processing line

• Ensure proper disposal of hazardous waste materials in compliance with regulations

• Operate a crane safely and effectively

• Perform other duties as assigned

Position Qualifications

Competency Statements

• Accountability – Accept responsibility and account for actions

• Accuracy – Perform work thoroughly and correctly

• Applied Learning – Engage in learning activities effectively

• Oral Communication – Communicate clearly with team members

• Decision Making – Make sound decisions while following procedures

• Detail Oriented – Pay close attention to details

• Ethical Conduct – Demonstrate values and standards consistently

• Honesty/Integrity – Be truthful and credible in the workplace

• Initiative – Take proactive steps to solve problems and reach goals

• Judgment – Formulate sound decisions using available information

• Organized – Maintain structure and order in tasks and responsibilities

Qualifications

• High school diploma or equivalent required

• Prior experience in manufacturing or processing preferred

• Ability to operate machinery and equipment safely

• Strong attention to detail and organizational skills

• Commitment to workplace safety and compliance

Benefits

• Competitive pay

• Health, dental, and vision insurance

• Paid time off and holidays

• Opportunities for growth and advancement

Join Our Team in Lynwood! Now Hiring Production Line Technicians

Job Description

We are seeking a skilled and detail-oriented Processing Line Technician to join our team. This role is responsible for processing parts according to specifications, overseeing line operations, and ensuring compliance with safety and quality standards.

Reasonable Accommodations Statement To accomplish this job successfully, an individual must be able to perform, with or without reasonable accommodation, each essential function satisfactorily. Reasonable accommodations may be made to help enable qualified individuals with disabilities to perform the essential functions.

Essential Functions

• Process parts in tanks according to specifications, work orders, and requirements

• Calculate processing times to ensure accuracy and efficiency

• Remove, rinse, and immerse parts in baths as required for completion

• Complete paperwork in accordance with company and processing guidelines

• Oversee and assist line assistants to optimize throughput

• Evaluate and log preventative maintenance on the processing line

• Ensure proper disposal of hazardous waste materials in compliance with regulations

• Operate a crane safely and effectively

• Perform other duties as assigned

Benefits

• Competitive pay

• Health, dental, and vision insurance

• Paid time off and holidays

• Opportunities for growth and advancement

Competency Statements

• Accountability – Accept responsibility and account for actions

• Accuracy – Perform work thoroughly and correctly

• Applied Learning – Engage in learning activities effectively

• Oral Communication – Communicate clearly with team members

• Decision Making – Make sound decisions while following procedures

• Detail Oriented – Pay close attention to details

• Ethical Conduct – Demonstrate values and standards consistently

• Honesty/Integrity – Be truthful and credible in the workplace

• Initiative – Take proactive steps to solve problems and reach goals

• Judgment – Formulate sound decisions using available information

• Organized – Maintain structure and order in tasks and responsibilities

Qualifications

• High school diploma or equivalent required

• Prior experience in manufacturing or processing preferred

• Ability to operate machinery and equipment safely

• Strong attention to detail and organizational skills

• Commitment to workplace safety and compliance

Join our Team! We’re Hiring Production Technicians in Lynwood.

Job Summary

We are seeking a detail-oriented and reliable Production Technician to join our team. The ideal candidate will be responsible for processing parts according to shop work orders, specifications, and drawings, while ensuring quality and compliance with safety standards.

Essential Functions

• Process parts according to shop work orders and applicable specifications/drawings

• Follow supervisor instructions pertaining to specific tasks

• Ensure integrity of incoming parts by checking for damage, scratches, or defects

• Complete work orders and paperwork accurately in line with job requirements and specifications

• Manage hazardous materials safely in compliance with state and federal regulations

• Perform other duties as required to support operations

Benefits

• Competitive pay

• Health, dental, and vision insurance

• Paid time off and holidays

• Opportunities for growth and advancement

• High school diploma or equivalent

• Previous experience in a manufacturing or production environment preferred

• Ability to read and interpret technical drawings and specifications

• Strong attention to detail and organizational skills

• Commitment to workplace safety and compliance

ResourceMFG is Now Hiring Manufacturing Associates to come join our team in Ogden.

Pay $21.50/hour

Shifft 7:00PM to 7:30AM working the 2,2,3 schedule $21.50 Hourly

Manufacturing Associate Job Responsibilities:

• Manufacturing associates will Fulfill the daily production demands of a powder products manufacturing facility as indicated by either the production schedule and/or the shift lead
• Understand the basic setup, loading and operation of production equipment
• Understand the raw ingredient set-up and blending of composite material into finished products.
• Mild to moderate lifting. 

Benefits:

• Weekly pay every Friday 
• Every OTHER weekend off 
• Overtime offered 

• Able to read and understand a manufacturing formulas
• Minimum 6 months in manufacturing environment
• Must have strong work ethic; be detail oriented; be able to rely on instructions and per-established guidelines to perform the functions of the job
• Able to lift 50lbs

Apply today!

#Applynow