Night Shift Blending Associate – Earn $21.50/hr + Every Other Weekend Off! 

#nowhiring

What You Bring

• Minimum 6 months manufacturing experience
• Ability to read and understand manufacturing formulas
• Strong work ethic and attention to detail
• Ability to follow instructions and adhere to established processes
• Dependable and team-oriented mindset

Material Receiving Inspector

• Responsible for managing daily quality control inspections of incoming materials that meet company standards.
• Including supplier document compliance, visual inspections, dimensional checks, assembly verification, and supplier inspections.

Key Job Responsibilities:

• Conduct visual inspections, measurements, and test on raw materials, major equipment.
• Mark items for acceptance or rejections, record test results.
• Coordinate with suppliers, carriers, and internal departments.

Minimum Requirements:

• ASNT SNT-TC-1A qualified Level I in Visual Inspection (NDE).
• Experience with dimensional inspection equipment such as tape measures and familiarity with warehouse operations.
• Strong warehouse skills, including inventory management, storage procedures, and material handling.

Schedule shift is 1st; 6am – 4:30pm Monday to Friday. Saturdays if required.

Pay range is from $25 to $28 an hour. Based on experience.

Consideration based on resume presented. 

#nowhiring

Steel toed footwear

NDT Level II – QC Inspector

Job Summary:

Position requires performing visual inspection of welded parts and assemblies in accordance with the applicable design requirements

Duties:

• Visual inspection of welded parts and assemblies in accordance with the applicable design requirements.
• Interpretation of drawings, procedures, instructions, and specifications for determining the acceptance of the product undergoing examination.
• Perform dimensional inspection on piece parts and assemblies in accordance with applicable design documents within the manufacturing facility, at supplies, or at the customer site.
• Monitor and records results of component testing (hydrostatic testing, coating, etc.), witness, or process audits in accordance with documented procedures.
• Prepares non-conformance reports, where applicable, and completes all other documentation requirements.
• Ensure documentation of inspection and testing is performed.
• Assist in the training of other personnel as required by management or as required by the specific task being performed.

Requirements:

• Minimum 2+ year experience working within a manufacturing environment/facility.
• Will be expected to stand for 8–10-hour shifts.
• Resume required.

Pay: $25-30 depends on experience.

Shift: 1st shift Monday-Friday 6:00am to 4:30pm. 10 hour shifts. Saturdays when required.

#nowhiring

Steel toed footwear

Inventory Control Specialist

 Job Duties:

• Perform routine cycle counting of inventory.
• Develops, executes, and oversees annual, monthly, and weekly cycle  count planning for all inventory locations/warehouses.
• Assists in the planning and execution of annual physical inventory.
• Entry of transactional data into ERP system in an accurate and  timely fashion.
• Ensuring warehouse inventory balances are maintained at the  highest-level accuracy possible.
• Performs floor to book and book to floor counting of inventory.
• Compares and analyzes inventory balance discrepancies.
• Determines root cause analysis for inventory discrepancies.
• Prepares, maintains and distributes inventory metrics dashboard to  organization,
• Provides recommendations for process changes and technology changes  to improve inventory accuracy.
• Open bales, crates, and other containers.
• Assist in counting of  inventory.
• Weighing and counting items for distribution within plant to ensure conformance to company standards.
• Recording amounts of materials or items received or distributed via appropriates computer program.

 Resume required

1st shift – 6am-4:30pm  

Pay – $19 – $25 depends on experience

#nowhiring

Steel toed footwear

Material Handler/Shipping & Receiving

Decatur, AL

Available Shifts:

Morning 7:00 am – 3:30 pm 

 Pay: $16.00 – 18.00 (Based on experience)

Looking for your next job in manufacturing? Let ResourceMFG by Employbridge help you out. We’ve got an awesome job for the right Assembly Worker with a top local company. You’ll get good pay and benefits, plus FREE online courses to learn new skills and move up in your career.

We Require Our Customers to Offer:

• Safe and clean work environment
• Employee focused workplace
• Safety programs and training

As a ResourceMFG Assembler We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

Job Responsibilities

• Previous experience driving a forklift is positive
• Ability to read and interpret an order page or bill of materials
• Main shipping and receiving warehouse are 
• Basic knowledge of hand tool use.
• Takes direction well and shows good initiative/self-motivated 
• Will be working in a warehouse team, so they need to thrive in that environment.
• Initial tasks will include building/populating traffic signal heads with LED modules and warehouse organization. 

Job Requirements

• General Warehouse and Materials Handling Experience preferred.
• High School graduate (or equivalent) preferred
• Previous experience in a similar manufacturing role helpful
• Ability to work in a NOT climate-controlled and may be exposed to the elements while loading/unloading a shipment.
• Ability to lift 65 lbs.
• May also be required to assist with other warehouse duties at Temple in other buildings

Apply Now!

Don’t miss out on a great opportunity to join one of the world’s leading automotive suppliers in Huntsville, AL. 

 #nowhiring

Warehouse experience required

Machine Operators and Saw Operators

The machine operator is responsible for operating equipment such as band saws, lathes, milling machines, and grinders within the Piping & Structural Fabrication Departments.

 Duties:

• Operate machinery such as saws, lathes, milling machines and grinders.
• Operate overhead cranes. 
• Maintain raw material inventories.
• Ability to read blueprints and follow product specification instructions.

Requirements:

• Minimum 2 years fabrication experience
• Able to lift up to 50 lbs
• Able to stand for 8-10 hour shifts
• Resume required

Pay: $18-$22 depends on experience. 2nd shift differential pay.

Shift: 2nd shift – 5:30 pm – 3:30 am

Shift: 1st shift – 6:00am – 5:30pm

#nowhiring

Steel toed footwear

Now Hiring: Glass Production Team Members – Plymouth, MI

Join a growing company and build a career in glass manufacturing.

What We Offer:

• $16–$17/hr starting pay
• Stable, full-time work
• Supportive team environment

Available Shifts:

• Days: 6:30 AM – 3:00 PM
• Afternoons: 2:55 PM – 11:25 PM

What You’ll Do:

• Assist in glass production and finishing
• Perform quality checks
• Keep equipment and work areas clean
• Work safely and follow procedures

Who We’re Looking For:

• Dependable workers with a positive attitude

6 months previous experience

Industrial Painter and Blaster

 Our client who delivers packaged modular systems engineered and manufactured in one of our Houston facilities, which are utilized in data centers, power and commercial/industrial utility system applications.

 Job Skills:

• Surface preparations & protective coatings applications on above ground piping; steel structures.
• Operate/maintain various blasting, spraying & other equipment.
• Ability to read read/interpret documents written in English.
• Application of paints & specialty coatings (epoxies, urethanes & zincs).
• Ability to utilize scaffolding, rigging, access, containment systems, & safety equipment.
• Experience with industrial coatings, application process, 2-part mixing process, HVLP equipment, consistent millage.

 Minimum Requirements:

2-5 years of experience on industrial painting

Day shift and Night shifts available

1st shift – 6am – 5:30pm

2nd shift – 4:30pm – 2:30am. 2nd shift pay differential.

$20 – $24 depend on experience

Resume required

#nowhiring

Steel toed footwear

Structural Welder

Structural Welders for our Centrally located client manufacturer of complex engineered skids.

• Structural welding in a shop environment.
• Ability to read blueprints, schematics Proficient with welding processes.
• Exceptional math and measurement skills.
• Qualified candidates must pass weld test 3G & 4G. MIG/Flux-core weld processes.
• Structural welding and fitting experience 3-5 years.
• Fit, cut and tack material.
• Prepare welding joints.
• Conventional and measuring instruments.
• Finish grinding applications using manual/power tools.
• Resume required.

1st shifts 6am to 6:30pm; Mon to Sat

2nd shifts 5:30pm to 4:00am; Mon to Sat. 2nd shift pay differential

Pay range: $24-$30 depends on experience

#nowhiring

Steel toed footwear and resume

Mechanical and Electrical Assemblers

 Mechanical Assembler

• Perform manual processes to complete mechanical and sub-assemblies, using hand tools, and electronic and pneumatic tooling.
• Familiar with assembly and measuring tools, interpret visual aids and must be able to perform simple shop math.

 Requirements: 

• Minimum one year working within a manufacturing environment. 
• Ability to read and interpret P&ID, ISO, and engineering assembly drawings
• Ability to read fabrications drawings is a plus
• May work at different workstations as production needs require or shift from one station to another during the assembly process.

 Pay: $17 – $24; depends on experience

Shift: 1st shift 6:00 am – 5:30 pm. 10 to 12 hour shifts and Saturdays required.

Electrical Assembler

• Perform manual processes to complete mechanical and electrical assemblies and sub-assemblies, using hand, electric and pneumatic tooling
• Complete tasks as directed by manufacturing schedule with minimum supervision

Requirements:

• Familiarity with assembly and measuring tools, interpretation of visual aids and ability to perform simple shop math.
• Competency in reading and interpreting engineered drawings, schematics or other technical documents.

 Pay: $18 – $25 depend on experience

Shift: 1st shift 6:00 am – 5:30 pm. 10 to 12 hour shifts and Saturdays required.

Have the ability to lift up to 50 lbs.

Expected to stand for 8–10 hour shifts

Facility is a non-climate-controlled environment

#nowhiring

Steel toed footwear and resume

Pipe Welder

Job Summary:

Pipe welder proficient in welding techniques

Duties: 

• Proficient in assigned welding techniques.
• Interpretation of mechanical drawings, including the ability to read weld symbols.
• Knowledge of wire and filler materials applications for various steel alloys, aluminum, and some exotic materials.
• Working knowledge of fixturing and weld set up parameters (amps, volts, etc.).
• Convention and precision measuring instruments.
• Process inspection, certification, and documentation. 
• Welding equipment maintenance and inspection.
• Finish grinding applications using manual and power tools.
• Safety and housekeeping.
• Other duties as assigned by supervisor.

Requirements: 

• Minimum 4+ year experience working within a manufacturing environment/facility 
• Able to lift up to 50 lbs.
• Able to stand for 8–10-hour shifts

Pay: $25-$31 depends on experience

Shift: 2nd shift – 6:00 pm – 5:30am, (flexible to 10-hour shifts/Saturdays required)

#nowhiring

Steel toed footwear

Pipe Fitters

Pipe Fitters for day or night positions

Job Summary:

Pipe Fitter lay out, assemble, install and maintain pipe systems, pipe supports, and related hydraulic and pneumatic equipment.

Duties:

• Interpretation of mechanical drawings, including the ability to read weld symbols
• Knowledge of wire and filler materials applications for various steel alloys, aluminum, and some exotic materials
• Working knowledge of fixturing and weld set up parameters (amps, volts, etc.)
• Convention and precision measuring instruments
• Process inspection, certification, and documentation
• Welding equipment maintenance and inspection
• Finish grinding applications using manual and power tools
• Safety and housekeeping
• Other duties as assigned by supervisor

Requirements:

• Minimum 3+ year experience working within a manufacturing environment/facility
• Be prepared to stand for 8–10-12 hour shifts
• Resume required

Pay: $25-$33 depends on experience. 2nd shift differential.

Shift: 1st shift – 6am – 6:00pm (flexible to work 10/12 hours)

Shift: 2nd shift – 4:30 pm – 3:30 am (flexible to 10-hour shifts/Saturdays required)

#nowhiring

Steel toed footwear

?? Position: Assembly Technician – Cooling Systems

• Location: Romulus, MI
• Shifts Available:
  • 5:00 AM – 3:30 PM (First Shift)
  • 4:00 PM – 2:20 AM (Second Shift)

?? Pay & Incentives

• $16.00/hr – First Shift
• $16.35/hr – Second Shift
• $100 Weekly Attendance Bonus for perfect attendance

?? What You’ll Do

• Assemble cooling systems for Ford vehicles
• Use hand tools and follow detailed work instructions
• Perform quality checks to ensure all components meet standards
• Maintain a clean and safe work area
• Work as part of a production team to meet daily goals

? Requirements

• Ability to stand for 8–10 hours
• Comfortable with repetitive assembly tasks
• Reliable transportation and strong attendance
• Ability to lift up to 25–30 lbs

6 months previous experience required

NOW HIRING 

?? What You’ll Do

• Arrive on time and ready to work each day
• Follow all safety procedures and client guidelines
• Report any product or process issues to your team lead
• Keep your work area clean, organized, and inspection-ready
• Operate machinery such as case erectors, packers, and sealers
• Requisition materials needed for production
• Hand-pack bagged products with care and attention to quality
• Inspect packaging and product integrity to ensure top standards
• Maintain a safe, clean workspace in compliance with GMP and safety regulations

?? Key Requirements Basic communication skills in English

Ability to perform repetitive tasks efficiently

Must be able to lift 50 lbs or more

Comfortable working in extreme temperatures Ability to stand for extended periods

Forklift Operator – Shipping / Materials

Location: Cadillac, MI

Pay: $19.50/hour (All Shifts Available)

Key Responsibilities

• Repack products according to customer specifications and quality standards
• Accurately label all containers and verify quantities
• Safely operate material handling equipment, including Hi-Lo (forklift)
• Use RF scan gun systems to split, combine, and track inventory
• Verify shipments using customer pick sheets
• Locate parts within inventory and identify components for finished goods
• Maintain a clean, organized, and safe work environment
• Follow all work instructions, procedures, and company policies
• Assist with shipping, receiving, and dock operations as needed
• Identify and report any safety hazards or concerns
• Comply with all Health, Safety, and Environmental guidelines
• Support additional tasks and assignments as needed

Qualifications

• Strong attention to detail and ability to follow instructions accurately
• Good communication skills and ability to work as part of a team
• Basic math and problem-solving skills
• Prior forklift (Hi-Lo) experience preferred
• Experience using RF scanners and basic computer systems

What We Offer

• Competitive pay at $18.00/hour
• Weekly pay options (Direct Deposit or Pay Card)
• Access to health benefits and retirement plans
• Opportunity for growth and long-term employment
• A safe, team-oriented work environment

 #nowhiring

Forklift Driver

ResourceMFG is hiring in Midway KY!

Start Immediately!

1st, 2nd and 3rd Shifts Available

$16 -$17 PER HOUR

• Warehouse, outbound shipping
• Must be able to lift up to 50lbs and team lift when needed
• Loading pallets and shipments, operating electric pallet jack

Benefits of Joining the ResourceMFG Team: 

• Weekly Pay – Every Friday 
• Comprehensive Medical Benefits Available for Your Entire Family 
• Free Online Education 
• Performance to Hire Opportunity 

Apply Today!

Lifting up to 50lbs, standing up to 8-10 hours per day

Now Hiring: Press Operators – Molding Department

Cadillac, MI

Attention: Reed City, Traverse City & Cadillac Areas!

Assembly Resource MFG is currently hiring Press Operators for our molding department. We have immediate openings on all shifts at a great facility in Cadillac. This is a temp-to-hire opportunity with on-the-job training, competitive pay, and a supportive work environment.

Pay

$21.25/hour

Available Shifts

• 1st Shift: 7:00 AM – 3:00 PM
• 2nd Shift: 3:00 PM – 11:00 PM
• 3rd Shift: 11:00 PM – 7:00 AM

Key Responsibilities

• Operate injection press, Sacomat press, or assembly equipment
• Perform in-line testing to ensure product quality
• Follow process sheets and production guidelines carefully
• Verify components and materials before use
• Complete required traceability logs, lab sample tags, and production reports

What to Expect

We partner with employers who provide:

• A safe and clean work environment
• An employee-focused culture
• Ongoing safety programs and training

As a ResourceMFG Employee, You’ll Receive

• Competitive weekly pay
• Weekly pay options (Direct Deposit or Pay Card)
• Access to health benefits and a retirement plan
• Opportunity for long-term employment

Molding

NOW HIRING: Machine Operators – 2nd Shift

NTN Driveshaft • Columbus, IN

Pay: $20.50/hr

Shift: 2:15pm – 10:30pm

ONLY EAST PLANT COMPLETION BONUS!! Ask us for more details on the interview!!

Join a global leader in automotive manufacturing! NTN Driveshaft is growing and looking for reliable, hardworking team members to join our 3rd-shift production team. If you’re looking for steady work, great pay, and long-term opportunity, this is the place for you.

Positions Available

Machine Operators

What You’ll Do

• Operate manufacturing equipment safely and efficiently
• Assemble high-quality automotive components
• Perform routine quality checks
• Follow standard operating procedures
• Work in a fast-paced, team-oriented environment

What We Offer

• $20.50/hr starting pay (2nd shift)
• Overtime opportunities
• Weekly pay
• Growth and long-term career paths
• Safe, clean, climate-controlled facility
• Supportive team environment

What We’re Looking For

• Strong work ethic and consistent attendance
• Ability to stand for extended periods
• Basic mechanical aptitude (preferred but not required)
• Ability to lift up to 40 lbs

Previous machine experience

Assembler – Production Line

Cadillac, MI

Starting at $17.50/hour (All Shifts Available)

Assembly Resource MFG is seeking reliable and motivated Assemblers to join our team in the Cadillac area! If you enjoy working with your hands, are detail-oriented, and thrive in a fast-paced production environment, we want to hear from you.

Position Summary

In this role, you will inspect and build parts by assembling components on a production line. You will play a key role in ensuring quality products and supporting efficient manufacturing operations.

Responsibilities

• Assemble parts using hand tools or machinery
• Follow work instructions and process sheets accurately
• Perform quality inspections to check for defects
• Meet production speed and output goals
• Pack and move finished products as needed
• Maintain a clean and safe work environment
• Report any issues or concerns to your supervisor

Qualifications

• Strong attention to detail
• Ability to follow instructions and work procedures
• Dependable and punctual
• Ability to work in a fast-paced environment
• Previous manufacturing or assembly experience is a plus but not required

What We Offer

• Competitive starting wage of $17.50/hour
• All shifts available (flexible scheduling options)
• Opportunity for growth and advancement
• Supportive team environment

 #nowhiring

Assembly and Production

ResourceMFG is Hiring for Warehouse openings as Shipping, Receiving, Inventory control and Forklift.

Shift Day & Time:

7:00AM-3:30PM Monday-Friday

Pay Rate: $17.00 – $18.00 an hour

Job Responsibilities:

• Receiving & Processing: Unload and verify incoming shipments against purchase orders; inspect for damage or missing items.
• Storage & Organization: Store products in designated locations using forklifts, pallet jacks, or other equipment; maintain a clean, safe, and organized work environment.
• Order Fulfillment: Pick items from inventory according to picking lists or scanner instructions; assemble and pack orders for shipment.
• Shipping: Load outbound trucks or containers with products, ensuring proper stacking and securing
• Inventory Management: Perform cycle counts, stock checks, and enter data into warehouse management systems (WMS)
• Equipment Operation: Operate forklifts, pallet jacks, and other warehouse machinery; conduct pre-use inspections and report malfunctions.
• Quality & Safety: Inspect products for defects; follow OSHA and safety standards; report hazards or violations.

ResourceMFG is seeking Packagers & Formulate/Grind operators in Orleans, IN!

Immediate Start! Full – Time Long Term Temp job!

All shift available! 

Pay rate: $14-$15 Based on shift and department

Location: Orleans, IN 

Packaging Job Functions:

• Work safely and within the guidelines of the Sanitation and Q. A. Department to efficiently grade, pack and box ground beef patties to meet White Castle specifications and U.S.D.A. requirements.
• To work safely grading and straightening the ground beef patties as they come from the slicer to insure the wholesomeness of our product.
• To grade and pack the correct number of patty layers in a box.
• Compile and verify the correct number of boxes packed and report it to the supervisor.

Production Associate in Paoli, IN 

1st shift – $16 per hour Mon-Fri (and 1 Saturday per month) 6am to 3:30pm

3rd Shift – $17.25 per hour Mon-Fri (and 1 Saturday per month) 7pm to 4:30am

We will train

Great Pay. Great People. Great Opportunity. Great Climate Controlled Facility

Job Responsibilities

• Follow safety guidelines
• Follow standard work instructions as assigned
• Perform hands-on tasks
• Lift up to 50lbs, stand, bend, and reach
• May utilize basic hand tools
• Maintain clean and organized workspace
• Identify and resolve problems concerning equipment and materials
• Ensure product meets customer specifications
• Meet production standards
• Work in a team environment
• Accurate recordkeeping and quality documentation

As a ResourceMFG Production Associate We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• FREE ONLINE skills training

ResourceMFG is hiring for Electronic Technicians on 1st Shift in Bloomington

Shift Day & Time:

7:00AM-3:30PM Monday-Friday. Some hours may vary on 1st based on the job. 

Pay Rate:

$16 per hour. 

Job Description:

• Troubleshoot and repair electronic products.
• Adhere to procedures and work instructions, achieve hourly production rates and minimum quality standards as defined in the Quality Objectives.
• Understand and follow the production flow process, continuous development of knowledge relating to product type and model identification.
• Adhere to company policies and required attendance guidelines, follow all safety requirements.
• Maintain a clean and orderly work space and inform Supervisor or Team Leader of recurring issues.
• Potential work in the shipping department when orders are needed. 
• Prepping product for shipment for a Indiana legacy. 

Maintenance Technician

Keep Our Manufacturing Operations Running Smoothly!

We’re seeking a skilled Manufacturing Maintenance Technician to support equipment reliability and minimize downtime in a fast-paced industrial environment. This role is ideal for a hands-on technician with strong mechanical, electrical, and troubleshooting skills.

Requirements

• Prior manufacturing maintenance experience
• Strong knowledge of industrial mechanics and electrical systems
• Ability to read schematics and technical drawings
• Experience with PLCs and precision measuring tools
• Comfortable using scissor lifts and working around complex machinery
• Detail-oriented, dependable, and safety-focused

Technical Assembler

About the Role

The Technician supports the manufacturing, inspection, and processing of high-precision optical components. Technicians run production orders, collaborate with engineering, support process development, and contribute to continuous improvement. This role requires strong attention to detail, consistency, teamwork, and the ability to work independently when needed.

Key Responsibilities

• Perform high-precision optical metrology, including interferometry and optical part characterization
• Clean, handle, assemble, and package optical and opto-electronic components
• Conduct optical contacting processes
• Perform visual and microscope-based inspection of optical components
• Load, unload, and manipulate fragile optical parts and assemblies using appropriate tooling and fixtures
• Maintain inventory of cleanroom, manufacturing, and chemical supplies
• Maintain cleanroom and fabrication areas according to procedural and cleanliness standards
• Read, understand, and follow written manufacturing procedures
• Support documentation and development of manufacturing processes and procedures
• Participate in continuous improvement and process-development activities
• Transact production work orders through the ERP system
• Follow all safety training, PPE requirements, and operational guidelines
• Perform additional duties as assigned by the supervisor
• Operate and maintain grinding, lapping, polishing, and CNC fabrication equipment (if applicable)
• Clean components before and after coating or during processing using manual and spin-cleaning methods (if applicable)
• Inspect glass and crystal components using MIL specifications (if applicable)
• Prepare parts for shipment (if applicable)
• Operate, load, unload, and maintain vacuum coating equipment for thin-film processes (if applicable)
• Calculate coating parameters based on historical data (if applicable)
• Perform and analyze spectrophotometer scans (if applicable)
• Troubleshoot vacuum systems (if applicable)

Education & Experience

• Experience in a manufacturing environment preferred
• Experience with optical components is a plus
• Familiarity with cleanroom and ESD-safe environments is preferred
• Familiarity with microscope inspection techniques is preferred

Knowledge, Skills & Abilities

• Ability to perform repetitive tasks requiring consistent mental and visual focus
• Strong hand–eye coordination for handling delicate components
• Proficiency with basic computer applications including Word, Excel, and email
• Strong work ethic and desire to learn new skills
• Effective communication skills and ability to work within a team environment

Working Conditions & Physical Demands

• Regular use of a computer, keyboard, and digital tools
• Frequent sitting, bending, reaching, and fine-motor work while using microscopes and inspection equipment
• Ability to manipulate and position fragile optical components and assemblies
• Ability to grasp, turn, adjust, and handle small instruments and tools
• Repetitive wrist and forearm movements during inspection and microscope operation
• Ability to bend at the neck for extended periods during inspection tasks
• Operation of testing and measuring equipment requiring applied force to adjust knobs, cranks, and calibration mechanisms
• Exposure to minimal fumes from alcohol and acetone used in cleaning
• Ability to lift up to 50 lbs occasionally, 20 lbs frequently, and 10 lbs continuously (Medium Work)
• Ability to gown up and work in cleanroom environments as required
• Strict adherence to safety procedures and PPE requirements