Factory and Manufacturing Jobs Hiring
Search our job openings
Results for -
Forklift, Sit Down- Propane [PIT]
Mocksville, NC
Base Pay: 18.00 per HOUR
Currently looking for a sit down forklift and standup forklift operator in the Mocksville area! Shift: 1st 6am-2:30pm Pay $18-20 Must have good work history/longevity …
Hose Builder
Haw River, NC
Base Pay: 18.00 per HOUR
We are looking for a person to perform operations as required to build hose to specifications outlined on the work order and engineering master in …
We are looking for a person to perform operations as required to build hose to specifications outlined on the work order and engineering master in Haw River area.
Shift is 2nd 2:30pm-11:00pm
Pay $18
Procedures
- ? Obtain work order and specification showing construction of hose to be made.
- ? Review entire work order and specification to ensure proper building of hose.
- ? Assemble required materials.
- ? Apply to mandrel as outlined in specifications. Ensure all materials are applied in proper sequence as outlined on the work order.
- ? Apply identifying part numbers to finished hose as supplied with the work order.
- ? Cover finished hose with nylon wrap.
- ? If hose is corrugated attach rope.
- ? Move finished hose to staging area for curing.
- ? Other duties: o Keep work area clean. o Empty trash cans. o Assist in other department jobs when needed or instructed by the supervisor.
Warehouse Associate
Graham, NC
Base Pay: 15.00 per HOUR
We are currently looking for general labor position in Graham area! Please apply now! Shift 5am-3:30pm Pay $15 3pm-1:30pm Pay $16.50 Please Apply now!! …
hose manufacturing support
Haw River, NC
Base Pay: 17.00 per HOUR
Looking for someone to Operate stripping table and related equipment to remove mandrels from hoses in the Haw river area. Shift 2nd 2:30pm- 11:00pm Pay …
Looking for someone to Operate stripping table and related equipment to remove mandrels from hoses in the Haw river area.
Shift 2nd 2:30pm- 11:00pm
Pay $17
Procedures
- ? Load hoses onto the train for the vulcanizer. Run cure cycle.
- ? Move cooled hoses onto the unwrap table.
- ? Operate the unwrapper to remove rope and nylon cure tape from the hose.
- ? Apply plastic wrap as required.
- ? Re-roll rope and nylon for further use.
- ? Remove the lay line carrier strip from the hose.
- ? Cut the hose end and attach to the sled.
- ? Set proper air pressure.
- ? Clamp the hose and lock into vice.
- ? Apply air to break the hose free from the mandrel.
- ? Pull the hose free from the mandrel using the sled.
- ? Strip excess material from nipples and return to nipple storage at the main machine.
- ? Move mandrels to the main machine or storage racks as needed.
- ? Other duties: o Keep work area clean. o Empty trash cans. o Assist in other department jobs when needed or instructed by the supervisor.
Maintenance Mechanic
Houston, TX
Base Pay: 30.00 per HOUR
Apply Today! Maintenance Mechanic Flexible to rotating shift between 2 shifts 5:00 am to 8:00 pm Salary Range: $25-$30 Responsible for installing, maintaining, troubleshooting, …
Apply Today!
Maintenance Mechanic
Flexible to rotating shift between 2 shifts 5:00 am to 8:00 pm
Salary Range: $25-$30
Responsible for installing, maintaining, troubleshooting, and repairing mechanical and electrical equipment with a focus on motor control systems. This role supports production of coating manufacturing and facility operations by ensuring all electromechanical systems such as motors, drives and automated components function properly and safely.
Mechanical Responsibilities
• Inspect, maintain, and repair mechanical systems, including pumps, gearboxes, conveyors, and hydraulics.
• Conduct routine maintenance.
• Fabricate brackets, supports, or components as needed using metalworking tools and welding equipment.
Electrical Responsibilities
• Install and maintain electrical systems up to 480V, including power distribution panels, lighting, and control cabinets.
• Troubleshoot electrical issues using schematics, diagrams, and test equipment.
• Perform lockout/tagout procedures.
Motor Control Responsibilities
• Maintain and troubleshoot AC/DC motors, motor starters, contactors, relays, and overload protection systems.
• Install and configure variable frequency drives (VFDs), soft starters, and motor protection devices.
• Test, wire, and commission motor control panels and motor circuits according to specifications.
• Read and interpret one-line diagrams, ladder logic, and control wiring diagrams.
Automation Support
• Assist with troubleshooting PLC-based control systems (Allen-Bradley, Siemens, etc.).
Job Requirements:
• High school diploma or GED required, technical diploma or associate degree in Industrial Electrical, Mechatronics, or a related field preferred.
• Minimum of 3–5 years of experience in industrial maintenance with emphasis on motor control systems.
• Knowledge of electrical codes (NEC), NFPA 70E safety standards, and industrial best practices.
• Ability to read and interpret complex schematics, blueprints, and technical manuals.
• Familiarity with CMMS software for work orders and maintenance tracking.
Machine Builder
Williamston, MI
Base Pay: 20.00 - 25.00
We are searching for an experienced day shift Machine Builder. This is a direct hire opportunity! Day shift Pay up to $25 per hour based …
We are searching for an experienced day shift Machine Builder.
This is a direct hire opportunity!
Day shift
Pay up to $25 per hour based on experience
Benefits for a Machine Builder:
• Day shift
• Direct hire
• Health care benefits available
• 401K
• Job advancement opportunities available
Requirements for a Machine Builder:
• Preferred 2 years minimum of experience with sub-assemblies and large assemblies in a manufacturing setting or skilled trades technical certification
• Ability to read and interpret blueprints and technical drawings
• Proficiency in metric and inch systems
• Basic electrical knowledge and computer skills
• Strong problem-solving skills and attention to detail
Stitching Machine Operator
Lillington, NC
Base Pay: 12.00 per HOUR
?? Job Opening: Industrial Sewing Machine Operator (Stitcher) ?? Location: Lillington, NC ?? Pay: $12.00/hour ?? Schedule: Monday – Thursday | 6:30 AM – 5:00 PM …
?? Job Opening: Industrial Sewing Machine Operator (Stitcher)
?? Location: Lillington, NC
?? Pay: $12.00/hour
?? Schedule: Monday – Thursday | 6:30 AM – 5:00 PM
?? Temp-to-Hire Opportunity – based on performance & attendance
Position Overview:
We’re hiring an experienced Industrial Sewing Machine Operator to join our production team. This position involves performing detailed sewing tasks based on job orders in a fast-paced industrial environment.
Key Responsibilities Of Industrial Sewing Machine Operator (Stitcher):
-
Operate industrial sewing machines for production sewing
-
Follow job orders and complete assigned sewing tasks
-
Maintain a clean, organized, and safe work area
-
Follow all safety guidelines and company procedures
-
Perform other duties as assigned
Why work for ResourceMFG/ProLogistix?
- Great places to work
- Weekly pay periods
- Unlimited referral bonuses
- Health / Dental / Vision Benefits offered
- FREE career focused online classes
Apply Today!
Job Requirements:
Requirements for Industrial Sewing Machine Operator (Stitcher):
-
Recent experience as an industrial sewing machine operator
-
Must pass skill assessments
-
Standing, bending, and lifting required
-
Strong attention to detail and good vision
Metal Finisher
Lansing, MI
Base Pay: 16.00 - 18.00
Looking to jump start your new career? Resource MFG has immediate openings for Grinder Machine Operators in Lansing! Day Shift – no weekends!6am – 2:30pm$16.00 …
Looking to jump start your new career? Resource MFG has immediate openings for Grinder Machine Operators in Lansing!
Day Shift – no weekends!
6am – 2:30pm
$16.00 – 18.00 per hour to start
Machine Operator job duties:
- Grinding, filing, sanding of surfaces of dies, punches and other parts using hand tools, power tools, and knowledge of metal finishing techniques
- Polishing the surface to a smooth finish according to customer requirements
- Process the order in a timely manner to assure production schedule and quality standards are met
- Assist with removal of coating from tools
- Assist with the cleaning of tools prior to coating
- Other duties as assigned
Why Resource MFG:
- Weekly pay
- Referral program
- Medical, Dental, Vision plans available
2nd shift Industrial Painter
Mason, MI
Base Pay: 18.50 per HOUR
Resource MFG has an immediate opening for an experienced Industrial Painter in Mason! Afternoon shift$18.50 per hour A manufacturing company in Lansing is looking for …
Resource MFG has an immediate opening for an experienced Industrial Painter in Mason!
Afternoon shift
$18.50 per hour
A manufacturing company in Lansing is looking for an Industrial Painter to join their team! This role is temp to hire. This is a afternoon shift opportunity !
Industrial Painter Duties Include:
- Preparing parts for painting
- Sand blast parts as needed
- Operate power equipment, forklifts and cranes
- Apply paint and other coatings to surfaces
- Other duties as assigned
Why Resource MFG?
- Weekly pay
- Referral program
- Mobile App
Welder
Mason, MI
Base Pay: 15.00 - 20.00
Now Hiring in Mason!Day Shift Welder Needed! Great Pay + Good Benefits + Great Company! We have an immediate need for an experienced Welder to work …
Now Hiring in Mason!
Day Shift Welder Needed!
Great Pay + Good Benefits + Great Company!
We have an immediate need for an experienced Welder to work at a highly-sought after manufacturer. This opportunity comes with competitive pay and good benefits. If you enjoy working with a team that takes pride in a job well done, this is the perfect place for you.
Welding Job Description: During your employment, your main role will be to fabricate and weld together materials to form a part or object. All work will be performed in a Warehouse setting.
Benefits for Welders include:
- Weekly Pay with direct deposit option
- Medical, Dental, and Life Insurance (after 90 days), IRA/401K with 3% match (after 1 yr), annual pay increases, monthly safety training.
- Unlimited Referral Bonuses
- Cell Phone Discounts available
- Free Online College Courses available
Requirements of a Welder include:
- Basic Math(add, subtract, multiply, divide, measure, whole fractions, and decimals.
- Knowledge of saws, grinders, drills, flame-cutting equipment, and other power tools.
- Previous manufacturing, construction, farming, or industrial experience preferred
- Able to de-bur and clean welds and materials, and able to visually inspect yours and others welds.
- Freehand welding – MIG (90%), TIG, Stick, and ability to braze is helpful.
- Ability to read a tape measure (down to 32nds).
Short Term Admin
Maryville, TN
Base Pay: 18.50 per HOUR
Now Hiring a Short Term Front Desk Receptionist at DENSO! ** This assignment will only be for 1.5 weeks** Pay: $18.50/hr Shift: 8am-5pm Monday-Friday …
Now Hiring a Short Term Front Desk Receptionist at DENSO!
** This assignment will only be for 1.5 weeks**
Pay: $18.50/hr
Shift: 8am-5pm Monday-Friday
We are currently seeking a friendly and upbeat Front Desk Receptionist for a short-term assignment lasting approximately 1.5 weeks. This is a great opportunity for someone who enjoys engaging with people and is available for a quick, temporary role!
What We’re Looking For:
-
A bubbly, welcoming personality with excellent communication skills
-
Previous front desk or receptionist experience is required
-
Someone who is specifically looking for a short-term role
-
Reliable, professional, and able to hit the ground running
Job Requirements:
Duties May Include:
-
Greeting visitors and answering phones
-
Managing front desk operations
-
Basic administrative tasks as needed
If you’re a people-person who’s between opportunities or just looking for something short and sweet, we’d love to hear from you!
Maintenance Coordinator
Poway, CA
Base Pay: 20.00 - 25.00
Seeking a Maintenance Coordinator/Admin for our Poway distribution center. Monday-Friday 6am-2:30pm Onsite position Performance to hire $20-$25/hr. DOE Responsibilities: Input all purchase orders into maintenance …
Seeking a Maintenance Coordinator/Admin for our Poway distribution center.
- Monday-Friday 6am-2:30pm
- Onsite position
- Performance to hire
- $20-$25/hr. DOE
Responsibilities:
- Input all purchase orders into maintenance software.
- Enter all work orders into maintenance software.
- Direct phone calls to the fleet managers or others as needed.
- Identify problems and propose solutions to other members of management for improved shop efficiency.
- Maintain and review the inventory of parts and supplies.
- Analyze prices from vendors.
- Work with maintenance tracking software to ensure all equipment is scheduled for preventative maintenance (PM) and other maintenance as needed.
- Assign backhaul pickups throughout the day.
- Receive incoming calls from drivers, associates, and customers and be able and willing to answer all questions.
- Keep management informed of all activities concerning the Operations department.
Job Requirements:
- High school diploma or General Education Development (GED) or equivalent
- 1-3 years related experience required
- Data Entry experience.
- SAP preferred.
- Valid Driver License with a "clean" driving record (including no single DUI in the last 3 years and no multiple DUIs within the last 7 years)
- Computer proficient
- Strong listening and communication skills.
- Must occasionally lift and/or move up to 50 pounds.
- Forklift, Ride-on EPJ exp is a plus (Raymond & Crown)
Diesel Mechanic
Phenix City, AL
Base Pay: 34.00 per HOUR
Diesel Mechanic Direct Hire $30-$38 DOE 1st shift Requirements: 3 plus years of experience as a diesel mechanic or heavy truck technician Proficiency with diagnostic …
Diesel Mechanic
Direct Hire $30-$38 DOE
1st shift
Requirements:
- 3 plus years of experience as a diesel mechanic or heavy truck technician
- Proficiency with diagnostic tools and diesel engine repair
- Knowledge of DOT regulations and safety standards
- Must have own tools
- Must have valid drivers license; CDL preferred but not required
- Strong work ethic, attention to detail, and the ability to work independently
Perform diagnostics, repairs, and maintenance on diesel engines, heavy-duty trucks, and trailers.
Conduct routine inspections & preventative maintenance to minimize equipment downtime
Troubleshoot electrical, hydraulic, brake, and transmission systems.
Documents repairs and maintain maintenance logs in compliance with DOT regulations
Assist with Emergency roadside repairs when needed
Collaborate with dispatch & operations teams to prioritize urgent vehicle issues
Welders
Chambersburg, PA
Base Pay: 18.00 - 20.00
Now Hiring Aluminum Welders in Chambersburg, PA! Payrate: $18.00-$20.00 per hour Schedules: 1st shift Monday to Friday (7:00am-3:00pm) 2nd shift: Monday to Friday (3:00pm …
Now Hiring Aluminum Welders in Chambersburg, PA!
Payrate: $18.00-$20.00 per hour
Schedules:
- 1st shift Monday to Friday (7:00am-3:00pm)
- 2nd shift: Monday to Friday (3:00pm – 11:00pm)
- 3rd shift: Sunday to Thursday (11:00pm – 7:00am)
Job Description:
- Experience with Tig and Mig welding
- Ability to weld aluminum
Job Requirements:
Apply now, these positions will go fast
ProLogistix Offers You: Competitive pay Access to on-line training/ certification programs at no cost Paid weekly (Direct Deposit or ATM Debit Card available) Access to health benefits and retirement plan A personal recruiter to help with job searches and assistance when at work! FREE ONLINE skills training
Forklift Driver
Fabens, TX
Base Pay: 13.00 per HOUR
Forklift Drivers needed in Fabens TX Location: Fabens, TX Job Type: Full-Time Shifts Available: Day Shift: 6:00 AM – 5:00 PM Night Shift: 6:00 …
Forklift Drivers needed in Fabens TX
Location: Fabens, TX
Job Type: Full-Time
Shifts Available:
-
Day Shift: 6:00 AM – 5:00 PM
-
Night Shift: 6:00 PM – 4:30 AM
Pay: $13
Schedule: Must be available to rotate shifts
We are seeking dependable and experienced Forklift Drivers to support our warehouse and production operations in Fabens, TX. The ideal candidate will be responsible for safely operating forklifts to move materials, load/unload trucks, and support inventory and shipping tasks.
-
Operate a forklift sit-down in a safe and efficient manner
-
Load and unload trucks, trailers, and containers
-
Move raw materials and finished goods to designated areas
-
Perform daily equipment inspections and report maintenance issues
-
Accurately scan, tag, and track inventory using handheld devices or systems
-
Support production and warehouse teams as needed
-
Maintain a clean and safe work environment in compliance with company policies
Job Requirements:
-
Valid forklift certification or ability to obtain one
- OSHA Certified
-
6+ months of recent forklift experience preferred
-
Ability to lift up to 50 lbs and work in hot or cold environments
-
Must be able to work assigned day or night shift
-
Strong attention to safety and detail
-
Reliable, punctual, and able to follow instructions
-
Basic knowledge of warehouse or shipping processes a plus
Pack/RePack
Fabens, TX
Base Pay: 10.00 per HOUR
Now Hiring Packers / Repack Workers in Fabens TX Location: Fabens, TX Job Type: Full-Time Shifts Available: Day Shift: 6:00 AM – 5:00 PM …
Now Hiring Packers / Repack Workers in Fabens TX
Location: Fabens, TX
Job Type: Full-Time
Shifts Available:
-
Day Shift: 6:00 AM – 5:00 PM $10
-
Night Shift: 6:00 PM – 4:30 AM $11
We are hiring reliable and hardworking Packers and Repack Workers to join our team in Fabens, TX. This position is responsible for packaging, repackaging, and inspecting products to ensure they meet quality standards. If you’re detail-oriented and can work efficiently in a fast-paced environment, we want to hear from you!
-
Pack and repack products according to company and customer specifications
-
Inspect products for quality and report any defects or issues
-
Label and seal boxes accurately and efficiently
-
Maintain a clean and organized work area
-
Follow safety procedures and company policies at all times
-
Meet production and efficiency targets as assigned
-
Assist with other general labor duties as needed
Job Requirements:
-
No prior experience required; training will be provided
-
Ability to stand for extended periods and perform repetitive tasks
-
Must be able to lift up to 30 lbs regularly
-
Willingness to work either day or night shift
-
Ability to follow written and verbal instructions
-
Dependable, punctual, and a team player
Maintenance
Fabens, TX
Base Pay: 18.00 per HOUR
Maintenance Technician needed in Fabens TX Pay $18-$23 or Depending on Experience Department: Maintenance2nd shift 6pm-4:30am We are seeking a skilled Maintenance Technician responsible …
Maintenance Technician needed in Fabens TX
Pay $18-$23 or Depending on Experience
Department: Maintenance
2nd shift 6pm-4:30am
We are seeking a skilled Maintenance Technician responsible for the maintenance, repair, and installation of processing equipment in our Fabens, TX plant. The ideal candidate will have working knowledge of mechanical, pneumatic, hydraulic, and electrical systems and will play a critical role in ensuring equipment uptime and production continuity.
-
Perform mechanical installations, equipment optimizations, and preventive maintenance on processing and production equipment.
-
Troubleshoot and maintain mechanical, pneumatic, hydraulic, and electrical/control systems in production areas.
-
Complete emergency repairs to minimize downtime and maintain production efficiency.
-
Conduct equipment changeovers as required by production schedules.
-
Use CMMS (MP2) system to complete and document all work orders and preventive maintenance tasks.
-
Read and interpret diagrams, blueprints, schematics, and technical manuals for troubleshooting and repair.
-
Work independently with minimal supervision while maintaining high safety and quality standards.
-
Diagnose mechanical issues, dismantle machines, replace defective parts, and reassemble to proper specifications.
-
Repair and troubleshoot HVAC systems, including components and system operation.
-
Perform root cause analysis and breakdown elimination on mechanical systems.
-
Generate detailed parts lists for both preventive and emergency maintenance needs.
-
Maintain environmental compliance with policies related to wastewater, stormwater, HVAC, and hazardous waste.
-
Safely perform all duties using the required PPE and in compliance with GMPs, SOPs, safety regulations, and company policies.
-
Troubleshoot and perform diagnostics on PLC programming, VFD drives, 3-phase systems, motor controls, and DC electronic systems.
Job Requirements:
-
3+ years of experience in industrial equipment maintenance preferred
-
Strong understanding of mechanical, electrical, pneumatic, and hydraulic systems
-
Experience using CMMS systems (MP2 preferred)
-
Ability to read and interpret technical schematics and manuals
-
Skilled in diagnosing and repairing PLC and VFD systems
-
Knowledge of HVAC systems and basic environmental compliance requirements
-
Must be able to lift, carry, and handle materials and equipment weighing up to 50 lbs
-
Ability to work independently and in a team environment
-
Must be available to work flexible hours or respond to emergencies as needed
Process Technician
Brighton, MI
Base Pay: 25.00 per HOUR
Job Title: Process TechnicianLocation: Brighton, MIPay: $25 per hourSchedule: Monday–Friday, 12:00 AM – 8:00 AM (Weekends as needed)Employment Type: Full-Time Responsibilities Complete mold changes as directed. Complete injection mold …
Job Title: Process Technician
Location: Brighton, MI
Pay: $25 per hour
Schedule: Monday–Friday, 12:00 AM – 8:00 AM (Weekends as needed)
Employment Type: Full-Time
Responsibilities
- Complete mold changes as directed.
- Complete injection mold preventative maintenance as directed.
- Review each process at the press for optimization and associated documentation of actual process data.
- Press alarm answering and rectification of alarms as required.
- Maintain a working knowledge of all injection molding machines and related auxiliary equipment operation.
- Troubleshoot molding defect causes and remedy any issue using a systematic approach to process changes.
- Maintain clean, organized and safe work areas
- 5S
- Understanding and implementation of company goals and objectives
- Understanding the quality expectations of the parts molded
- Maintain clean, organized and safe work areas
Qualifications
- High School graduate or GED Recipient
- Excellent attendance
- Positive Attitude
- Prior experience as an injection molding process technician
- Excellent communication skills
- Excellent organizational skills
- Basic mathematics skills
- Safe working practices
Packer
LUBBOCK, TX
Base Pay: 13.00 per HOUR
Now hiring full time Packer! Competitive Pay. Stable Employer. Room for Growth. If you are safety-minded, detail-oriented and hardworking, a great packer job opportunity is …
Now hiring full time Packer!
Competitive Pay. Stable Employer. Room for Growth.
If you are safety-minded, detail-oriented and hardworking, a great packer job opportunity is waiting. Work for a local food production facility offering weekly pay and benefits. As a part of our team, you also get access to FREE skills training and other benefits to help you grow in your career.
1st Shift: 7am-until the job is done M-F
Pay: $13.00/hr
As a ResourceMFG Packer We Offer You:
- Competitive weekly pay (Direct Deposit or ATM Debit Card available)
- Unlimited Referral Bonuses
- Access to medical, dental, and vision benefits plus retirement plan
- AT&T cell phone discounts available
- Free Online Courses through Penn Foster including:
- Access to free mental health services
- Access to Working Advantage discounts and offers
- Life assistance resources. National and state offerings for food, utilities, housing, mental health and much more
Packer Responsibilities:
- Process and/or pack food products
Job Requirements:
- Ability to lift up to 50 lbs
Production Associate
Romulus, MI
Base Pay: 16.35 per HOUR
Resourcemfg is looking for Automotive Assembly Associates in Romulus MI. Shifts: 4:00pm-2:30am Monday to Friday with Weekends as needed. Offering $100 Weekly Attendance Bonus! $16.35 per …
Resourcemfg is looking for Automotive Assembly Associates in Romulus MI.
Shifts: 4:00pm-2:30am Monday to Friday with Weekends as needed.
Offering $100 Weekly Attendance Bonus!
$16.35 per hour (can earn up to $18.85 with weekly attendance bonus)
$750 90 day bonus
$750 180 day bonus
Job Description:
Automotive Assembling of HVAC systems for Ford vehicles. Operates automatic or semiautomatic hand tools in a continuous production/processing operation.
Assemblers Job Duties:
- Responsible for assembling parts to form complete units
- Utilize automatic and semi automatic hand tools
- Assembling HVAC Units for Ford vehicles.
- Operate automatic or semiautomatic machines in a continuous processing operation.
- Assembling parts to form complete units at a bench or workstation on a conveyor line in the factory.
- May include operations requiring the use of simple hand tools and/or activated power or special assembly tools.
Qualifications:
- 1 year experience doing Automotive Assembly
- 1 year experience shooting screws
- Ability to stand for 8-10 hours a day
- Ability to work in a warm environment.
Benefits:
- Attendance bonuses
- Retention bonues
- Weekly pay
Customer Service Rep
Valencia, CA
Base Pay: 23.00 per HOUR
Interested in working for a great company that will offer you a career path and great benefits?! Prologistix is the answer you are looking for! …
Interested in working for a great company that will offer you a career path and great benefits?!
Prologistix is the answer you are looking for!
At Prologistix we are looking for a Customer Service Rep
Pay rate up to $22per hour depending on experience
Work Schedule: 8:00am to 4:30pm, Monday-Friday.
Job Requirements:
- One year of related experience.
- Able to lift 50 lbs.
- Must be reliable
- Good Work Attitude and Team Player.
- This is a one month temp assignment
Job Requirements:
Duties include:
• Understand and adhere to policies, guidelines and procedures pertaining to the protection of Information Assets, integrity of customer transactions, proper and ethical utilization of access privileges and resources provided to perform the role. Fully comply with all provisions of the Company Code of Conduct, Use of Company Computer and Use of Communications Systems, and Telephone/Mobile Device Use Policy. • Protect company assets, systems, proprietary and confidential information in accordance with ***** Confidentiality policy and Corporate Information Security Policies and Procedures. • Proactively report actual or suspected vulnerabilities, security incidents and breaches in the confidentiality, integrity or availability of Information assets as per the Company’s Incident Reporting Process.
Benefits:
- Full Medical Insurance.
- Dental and Vision Insurance.
- Full time work.
- 5 Sick Days
- $100 Referral bonus
Office Coordinator
Aurora, CO
Base Pay: 30.00 per HOUR
The Office Coordinator provides support as it pertains to the warehouse, transportation, inventory or general administration. This position is responsible for assisting in site reporting, …
The Office Coordinator provides support as it pertains to the warehouse, transportation, inventory or general administration.
- This position is responsible for assisting in site reporting, payroll processing and personnel administration.
- Payroll: Collection and verification of pay sheets for location.
- Inputs payroll into Dedicated (or other) System.
- Monitors and applies adjustments as necessary for vacation pay, travel advances, etc.
- Generates final payroll transmission
- Upon receiving payroll, verifies amounts with check register prior to check distribution
- Billing/Accounting: Performs accounting tasks such as preparing account payable and accounts receivable
- DOT/Safety Files: Responsible for completing and updating DOT files as regulations require including ordering MVRs, scheduling physicals and pre-employment drug screens, etc.
- Insures all appropriate paperwork is sent to Corporate
- Location Files: Responsible for maintaining location files/record
Job Requirements:
- Must have working experience 3+ years payroll
- Must have knowledge on Colorado Department of Transportation driver files
- handle PTO and Sick time
- Working knowledge of Accounts Receivable
Warehouse Helper
Valencia, CA
Base Pay: 23.00 per HOUR
We are currently seeking a reliable and experienced Warehouse Helper to support our daily operations in a fast-paced warehouse environment. The ideal candidate will have …
We are currently seeking a reliable and experienced Warehouse Helper to support our daily operations in a fast-paced warehouse environment. The ideal candidate will have prior experience in shipping and receiving, inventory management, and basic warehouse leadership. This is a full-time, on-site role with consistent hours and the opportunity to contribute to a growing team
Key Responsibilities:
-
Oversee daily warehouse operations and assist in coordinating staff activities
-
Manage inbound and outbound shipments, including label creation and tracking using UPS and FedEx systems
-
Maintain accurate inventory records and ensure organized storage practices
-
Support a clean, safe, and compliant work environment by following company policies and safety procedures
-
Communicate effectively with team members and supervisors to ensure workflow efficiency
Location: Valencia, CA
Hours: Monday – Friday, 8:00 AM – 4:30 PM
Pay Rate: $23/hour
Job Requirements:
-
Oversee daily warehouse operations and assist in coordinating staff activities
-
Manage inbound and outbound shipments, including label creation and tracking using UPS and FedEx systems
-
Maintain accurate inventory records and ensure organized storage practices
-
Support a clean, safe, and compliant work environment by following company policies and safety procedures
-
Communicate effectively with team members and supervisors to ensure workflow efficiency
Auditor
Santa Teresa, NM
Base Pay: 13.00 per HOUR
Auditors Needed In The Santa Teresa Area Pay Rate: $13/hr Shift: 1pm- 9pm Monday – Saturday Weekly Pay Holiday Pay Direct Deposit Available Medical/Vision/Dental …
Auditors Needed In The Santa Teresa Area
Pay Rate: $13/hr
Shift: 1pm- 9pm Monday – Saturday
Weekly Pay
Holiday Pay
Direct Deposit Available
Medical/Vision/Dental
Job Responsibilities:
- Responsible for accurate receiving, loading, storing, and executing shipment orders.
- Counts all products, take weight, compares to manifest and checks all shipments for damage, shortage, overage and any other discrepancies.
- Report’s shortages, damages and/or discrepancies on appropriate forms.
- Maximizes space usage. Properly and safely puts away items onto the racks, locations and or ready rows using company system and scripts.
- Ensures that the correct number and type of product are being handled. Transports orders to shipping locations or assigned doors with material handling equipment (pallet jack)
- Review markings, address on cargo and ensure correct reference labels are on the cargo.
- Compares quantity, labeling and address with order to ensure outgoing shipments are complete and correct. Sign necessary documents to ensure record keeping.
Click Here To Apply Now
Job Requirements:
- Ability to work standing long hours
- Ability to read, write and follow written and verbal instructions
- Ability to perform required functions with a minimum of direct supervision in task of routine
- Applies acquired knowledge and skills to complete standard tasks
- Readily learns and applies new information and methods to work in assigned area
- Maintains appropriate licenses, training and certifications
- Must be available to work Saturday’s as it is part of your shift
- Bilingual is a plus
Forklift Operator
Santa Teresa, NM
Base Pay: 14.00 per HOUR
Stand-Up and Sit Down Forklift Operators Needed in the Santa Teresa Area Shift: 1pm – 9pm Monday – Saturday Pay Rate: $14/hr Weekly Pay …
Stand-Up and Sit Down Forklift Operators Needed in the Santa Teresa Area
Shift: 1pm – 9pm Monday – Saturday
Pay Rate: $14/hr
Weekly Pay
Holiday Pay
Medical/Vision/Dental
Job Description:
- Obtains copy of production schedule or shipping order and transports material or equipment to and from designated areas in the facility
- Loading and unloading goods from vehicles such as trailers.
- Moving goods packed on pallets around the warehouse facility
- Stacking goods and following inventory control instructions.
- Checking loads are secure
- Stacking empty pallets
- Performing daily equipment checks
- Examining products to verify conformance to quality standard
- Operate the forklift standup and cherry picker
- Audit and verify incoming material
- Cycle Count
Click Here To Apply Now
Job Requirements:
- Minimum of 6 months recent experience operating both sit down and standup forklifts
- Ability to work standing long hours
- Ability to read, write and follow written and verbal instructions
- Ability to perform required functions with a minimum of direct supervision in task of routine
- Applies acquired knowledge and skills to complete standard tasks
- Readily learns and applies new information and methods to work in assigned area
- Maintains appropriate licenses, training and certifications
- Must be available for overtime if needed
- Must pay attention to detail
- Must be available to work Saturday's as it is part of the schedule
Customer Service Rep
Santa Teresa, NM
Base Pay: 14.00 per HOUR
Customer Service Representatives Needed in the Santa Teresa Area Pay Rate: $14/Hr Shift: 8am – 5pm and/or 4am – 1pm Monday – Friday Weekly Pay …
Customer Service Representatives Needed in the Santa Teresa Area
Pay Rate: $14/Hr
Shift: 8am – 5pm and/or 4am – 1pm Monday – Friday
Weekly Pay
Holiday Pay
Medical/Vision/Dental
Job Description:
- Properly accounting for the location of incoming goods
- Assuring no damaged items are sent or received
- Comparing packing lists to company purchase orders and ensuring that the products in each delivery match the packing list
- Updating the product inventory as products are received and added to the inventory
- Filling out any paperwork necessary
- Scheduling and dispatching drivers, work crews, vehicles or equipment to appropriate locations according to predetermined schedules, customer requests or immediate needs
- Relaying information such as work orders or other messages to and from work crews, field inspectors, supervisors or emergency personnel
- Speaking with supervisors or customers to resolve problems, requests for services or equipment
- Preparing work orders for crew or receiving work orders from work crews
- Overseeing communications within company assigned territories
Click Here To Apply Now
Job Requirements:
- Minimum of 1 year previous experience in a similar role/ logistics field
- Interpersonal and customer service skills
- Analytical and problem-solving skills
- Multitasking and organizational skills
- Ability to answer a high volume of emails daily & work with a variety of systems
- Ability to share work among a customer service team
- Attentive to detail & Multi-tasker
- Excellent Time-management skills
- Bilingual a plus
- Fully proficient with various software applications (MS Word, MS Excel)
- Must be available to be flexible to work one Saturday a month
- Dispatch Experience a plus
Production
COLUMBUS, GA
Base Pay: 14.09 per HOUR
Forklift Operators 1st & 2nd shift $14.09/HR Columbus, GA Currently hiring for forklift operator that has experience as well as production experience as will …
Forklift Operators
1st & 2nd shift $14.09/HR
Columbus, GA
Currently hiring for forklift operator that has experience as well as production experience as will be operating a forklift but also doing production and Machine Operator. This position is not solely on a forklift.
1st shift is 7:00AM-3:00PM and 2nd shift is 3:00PM-11:00PM
Must wear steel toed shoes, be reliable to come to work everyday
May be standing for long periods of time
Laser Operator
Brighton, MI
Base Pay: 19.00 per HOUR
Michigan Laser – Laser Operator Opening! Pay: $19 Schedule: Day Shift | Monday–Friday | 6a–2:30p Location: Brighton, MI Job Duties: Set up and operate laser cutting …
Michigan Laser – Laser Operator Opening!
Pay: $19
Schedule: Day Shift | Monday–Friday | 6a–2:30p
Location: Brighton, MI
Job Duties:
-
Set up and operate laser cutting machines to cut metal materials
-
Load and unload sheet metal parts using forklifts or hoists
-
Inspect parts to ensure they meet specifications
-
Perform routine machine maintenance and troubleshooting
-
Read and interpret blueprints and work orders
Requirements:
-
1+ year experience with laser cutting equipment (Trumpf, Mazak, Amada, etc. preferred)
-
Ability to read blueprints and use precision measuring tools
-
Comfortable with standing for extended periods and lifting up to 50 lbs
-
Attention to detail and strong mechanical aptitude
Perks:
-
Weekly pay
-
Benefits available
-
Great opportunity for long-term placement with growth potential
Manufacturing Associate
Brighton, MI
Base Pay: 16.65 per HOUR
Job Title: Manufacturing Associate Location: Brighton, MI Pay Rate: $16.65 per hour Schedule: Monday – Friday | 4:30 PM – 1:30 AM (2nd Shift) About …
Job Title: Manufacturing Associate
Location: Brighton, MI
Pay Rate: $16.65 per hour
Schedule: Monday – Friday | 4:30 PM – 1:30 AM (2nd Shift)
About the Company:
A long-established manufacturer of high-quality refrigeration and air conditioning components is hiring for 2nd shift roles. With nearly 75 years in the industry, this company is known for producing dependable American-made parts and offering custom solutions for both HVAC and expanded industrial applications.
Position Overview:
We are seeking detail-oriented Manufacturing Associates to join the 2nd shift production team. This is a hands-on role in a clean, safety-conscious facility where team members build items for HVAC and other industrial markets. Ideal candidates are motivated, reliable, and eager to learn and grow in a long-term opportunity.
Responsibilities:
-
Build components used in HVAC systems and related industries
-
Organize supplies and raw material inventory
-
Assist with production prep and operation of equipment
-
Operate hand tools and manufacturing machinery
-
Perform visual and manual inspections of parts
-
Follow all safety procedures and company standards
-
Keep the work area clean and organized
Qualifications:
-
Manufacturing or warehouse experience preferred
-
Ability to lift up to 50 lbs and stand for long periods
-
Strong attention to detail
-
Willingness to assist in multiple areas as needed
-
Dependable attendance and punctuality for 2nd shift hours
2nd Shift Analyst
Lansing, MI
Base Pay: 22.00 per HOUR
Resource MFG has an immediate opening for an experienced Analyst in Lansing! Afternoon ShiftTrain on fay shift$22 per hour Our client is looking for an …
Resource MFG has an immediate opening for an experienced Analyst in Lansing!
Afternoon Shift
Train on fay shift
$22 per hour
Our client is looking for an experienced analyst to join their team! They analyst with be responsible for maintaining customer and departmental documentation. This ideal candidate will have strong computer skills, high attention to detail and strong customer service skills.
Analyst duties include:
- Direct contact and communication with customers
- Complete and submit customer and departmental documentation
- Read and analyze data from spreadsheets
- Report and track shipment and delivery activity
- Other duties as assigned
Why Resource MFG?
- Weekly pay
- Unlimited referral bonuses
- Mobile App
Find factory and manufacturing jobs hiring near you
We know factory and manufacturing jobs
Not all manufacturing staffing solutions are cut from the same cloth. At ResourceMFG, we prioritize developing quality business partnerships with the finest manufacturers so that you have a choice from among the best local factory and manufacturing jobs there are. We are excited to see how you thrive once you start your new career. ResourceMFG serves manufacturing industry verticals, including: automotive, aeronautics, electronics, machining, sheet metal, fabrication, pharma, extrusion, electrical and other specialized producers. And we place employees in temporary, temp-to-hire and direct hire jobs.
We provide the following factory and manufacturing jobs:
- Production Jobs
- Machinist Jobs
- Quality Control Jobs
- Assembly Jobs
- Maintenance Jobs
- Welder Jobs
- Material Handler Jobs
- Machine Operator
- Supervisor Jobs
We know people
At ResourceMFG, we understand that searching for factory and manufacturing jobs can be trying. That’s why we slow down and get to know you, your goals, and your skill set, so we can match you with great opportunities.
We know that while looking for a new work opportunity, you want flexibility as well as the chance for career growth. You’re focused on bringing your strong work ethic to do the best work you can, and we’re focused on acknowledging you and your work ethic by offering rewards, referral bonuses, and great benefits. See our Job Seekers’ FAQ page for further information.