Basic Machine Operation – assist in setting up and operating CNC machines, following detailed instructions and safety protocols. Quality Checks – perform basic inspections using calipers, micrometers, and gauges to verify part dimensions against specifications. Material Handling – load raw materials and unload finished parts, ensuring proper labeling and storage.

• Basic understanding of CNC machining and manufacturing processes
• Ability to read and follow technical instructions and blueprints
• Strong attention to detail and willingness to learn

3rd shift Monday – Friday 

This position includes the opportunity to enroll in Medical, Dental, Vision, Term Life, and Short-Term Disability benefits, as well as a Retirement Plan.  All Illinois talent are also entitled to accrue and use paid time off.  Additional benefits information can be found here:  https://www.resourcemfg.com/employees/benefits/

#nowhiring

Manufacturing environment, PPE (Steel toed boots, safety glasses, gloves and sleeves as needed) should be always worn.  Ability to stand, bend and stoop for 8 hours.  

We are currently seeking experienced CNC Lathe Machinists near Euclid, Ohio

Pay Rates: $19.00-$25.00+ based on experience

Shift: 1st Shift: 6am-4:30pm Mon-Thurs

          3rd Shift: 8pm-6am Sun-Wed

 Responsibilities:

• Operate CNC lathe machines (Mazak and/or Okuma) during overnight shift.
• Perform basic quality checks using measuring tools
• Interpreting specifications and blueprints accurately

Benefits:

• Weekly pay with direct deposit options 
• Overtime/Double-time available 
• Cell phone discounts 
• Medical, Dental and Vision 
• Free Online Courses through Penn Foster 

#nowhiring

Requirements:

• CNC Lathe experience
• Mazak and/or Okuma experience strongly preferred
• Ability to read blueprints

Apply Now!

#nowhiring

Opportunity is Knocking!

3rd Shift CNC Machine Operators Needed in Firestone, CO – Start Immediately!

Schedule – 3rd Shift:
Sunday-Thursday 11:00pm-7:00am

Level 2/3: $18.50-$25.50 Hourly (Depending on Experience)

Level 2/3 CNC Machine Operator (Mill) individual job functions include able to run and set up CNC Mills. Basic setups, offset adjustments, troubleshooting issues and fully competent with SPC duties. Filling in for CNC lead when needed.

Responsibilities:

• Ability to read and interpret simple blueprints.
• Basic knowledge of tooling types and their functions.
• Proficiency with all required measuring equipment.
• Ability to assist with SPC duties as required
• Set up and operate the machine on a trial run to verify parts conform to WI requirements.
• Adjusting and closing trackers within CSI.
• Ability to perform all SPC duties for CNC.
• Ability to perform basic machine setups and adjust offsets
• Strong problem-solving and analytical skills.
• Knowledge of CNC programming basics (G-code).
• Fully competent on CNC start and shutdown procedures.
• Filling in for CNC lead as required.

Benefits:
• Weekly pay
• Health, dental & vision insurance
• Safe, supportive work environment

#nowhiring

• CNC machine operation experience (3-10 years)
• Ability to read calipers, micrometers, or blueprints
• Strong attention to detail
• Ability to work 3rd shift (Sun–Thu, 11pm–7am)

Apply today and grow with us!

Opportunity is Knocking!

CNC Mill Operator Level 4/ Lead Needed to Start Immediately!

Schedule – 2nd Shift, Monday-Friday 3:00pm-11:00pm (overtime as needed)

Level 4:Lead $26-$33 Hourly (Depending on Experience)

Level 4 CNC Mill Operator/Lead  individual job functions include, expert in all aspects of CNC machining, including programming, setup, and troubleshooting. Daily leadership and mentoring role.

Responsibilities Candidate must be able to independently set up CNC and check parts and work within strict safety, quality, and efficiency standards. Plan and prioritize daily work schedule for team members.

All skills from Level 1, 2, and 3, plus:

• Plan and prioritize daily work schedule for team members.

• Ability to perform complex machine setups.

• Strong leadership and mentoring skills.

• Ability to troubleshoot and resolve complex issues.

• Working knowledge of CAD/CAM software.

• Working knowledge of CNC programming and machine operation.

• Advanced knowledge of program editing (G-code).

• Knowledge of GD & T.

• Ability to write and edit programs.

• Knowledge of tooling and fixtures.

• Good communication with all shifts and the CNC supervisor.

• Attending required meetings in CNC Supervisors absence.

• Monitor cutter and tooling requirements for shift. Communicating requirements and concerns to Supervisor.

• Over sees and is responsible for shift team members.

• Monitor team attendance and work with CNC supervisor on any concerns.

• Assure that all safety procedures are being followed.

Benefits:

• Weekly pay

• Health, dental & vision insurance

• Safe, supportive work environment

#nowhiring

Requirements:

• 4+ years of experience as a CNC machinist.
• Able to independently run and set up parts in a CNC Mill.
• Read and understand technical Drawings.

Apply today and grow with us!

Visual acuity to read instructions, operate machines, and inspect parts produced.