Quality Control

Electrical / Electronic / Mechanical

State of the art manufacturer in the Katy area has an immediate need for a Quality Control Inspector to support their production team. In this role you will be responsible for the QC of wiring, housings, testing of components and writing NCRs.

For you – 

• Excellent Katy location
• Up to $24 to Start
• 1st shift – starting at 6:00am and working 8 – 12 hour shifts
• 2nd shift – starting at 3:30pm and working 8 – 12 hour shifts

And

While working with ResourceMFG Employbridge you will experience – 

• Weekly Pay / Direct Deposit Available
• Free online training to enhance your career opportunities
• Access to Medical, Dental, Vision, Retirement Savings and TONs of Discount Programs
• Unlimited Referral Bonuses

Client is looking for - 

• 1 - 3 years’ experience in Quality Control manufacturing.
• Must be able to read and interpret schematics.
• Write NCRs
• Must be able to use Digital Multi-meters, Tape measure (preferably metric) basic hand tools.
• Previous experience with PCB Boards
• Double checking Hardware
• Must be detailed oriented, able to comprehend mechanical and wiring drawings, detect poor workmanship.
• Standing for extended periods and bending may be required.

Electrical Test Technician/Engineers

Katy, TX

General Role Description

Visually inspects all units to be tested (pre-power inspection), performs production line acceptance testing using a combination of manual and automated test equipment. With strong troubleshooting techniques, the technician should be able to identify problems during tests and provide solutions.

Work Schedules Available: 

Day Shift: 6:00 am – 4:00 pm, with possible/mandatory OT

Second Shift – 3:30 – Midnight, with possible/mandatory OT

Pay: 

$30/hr to Start and 1st  Shift – Paid weekly!

Role Accountabilities 

• Perform visual inspections on all product lines. 
• Perform production line acceptance testing including insulation tests and function tests. 
• Ability to work from instructions, drawings, and procedures. 
• Troubleshoot and provide results in a timely fashion (strong troubleshooting skills). 
• Record test results and complete test reports/paperwork per instructions/procedures.
• Report issues found on failed units.
• Perform some mechanical assembly.
• Must be able to lift 25 lbs. on a regular basis, and occasionally up to 40 lbs.
• Ability to handle large gage cables.
• Good communication skills and ability to function in a team environment with limited supervision.
• Excellent people skills to include collaborating in a multi-disciplinary, diverse, and dynamic team environment.
• Outstanding work ethics and commitment to organizational success.
• Able to follow and comply with Company Safety Standards.

Client expects:

• 2 - 5 years’ experience in the electro/mechanical manufacturing industry.
• Two-year technical degree in Applied Electrical Engineering or equivalent. Equivalent college hours in engineering or comparable industry experience.
• Must have experience testing energized high voltage equipment 480v+
• Must be able to read and interpret schematics.
• Experience in power electronics.
• Experience in operating standard test equipment including DMMs, Oscilloscopes, Power Analyzers, Isolation Testers, etc.
• Proficient in Microsoft Office products.
• Knowledge of ISO 9001

Position – Afternoons – 3:00p-11:20p

Hourly pay $18.35 – Hire in opportunity after 90 days Our company also offer’s great benefits!

The world’s leading performance brake manufacturer is hiring an Assembly Line Operator at Brembo North America.

Successful candidates should enjoy a fast-paced environment with repetitive lifting of products 10-50lb.

Must be quality orientated and have an eye for detail. At least 1 year of general manufacturing / production experience in an industrial environment required.

• Paid Weekly
• Referral and Attendance Bonus $$
• Medical, Dental, Vision
• Term Life
• Short Term Disability

Benefits include upon hire in with Brembo North America

• 401K match
• Tuition Reimbursement
• Wellness Plan
• Quarterly Bonuses

Maintain a safe work environment

6 months manufacturing experience Shift flexible

High School Diploma / GED Apply Now!

ResourceMFG has a great opportunity for Mechanical Assemblers worker in Simi Valley, CA for a metal fabrication company that manufactures metal storage products.

Hours:
Pay: $19.00 – 22.80

Hours: 

1st shift : 5am – 1:30pm
2nd shift: 1:30pm – 10pm 
Must be able to work up to 12 hours days.
Schedule: Monday to Friday and some Saturdays

Long term – performance to hire opportunity.
Duties:
•    Reading and comprehending instructions and following established procedures
•    Collecting all material and equipment needed to begin the process
•    Taking precision measurements to ensure perfect fit of components
•    Select or modify components according to measurements and specifications
•    Align material and put together parts to build more complex units
•    Check output to ensure highest quality
•    Maintain equipment in good condition
•    Keep records of production quantities and time
•    Report on issues, malfunction or defective parts

Benefits offered:
•             2 medical plans options
•             Referral Bonus 
•             Free online education courses 
•             Career advancement opportunities

Why choose ResourceMFG?
Because we are the nation’s first and largest manufacturing focused company, it’s all we do! We work hard for you by fighting for good pay and ensuring a safe work environment. We want to be your advocate and your stepping stone to a career in manufacturing!

Requirements:
•    1 year of mechanical assembly experience with large parts
•    Able to work in a fast pace work environment.
•    Attendance and punctuality is very important
•    Able to lift up to 50 pounds
•    Criminal background required and drug tested

Job Title: Administrative Support Associate (Temp-to-Hire)

Schedule:
Monday–Friday
7:00 AM – 3:30 PM or 8:00 AM – 4:30 PM (schedule may vary)

Position Type: Temp-to-Hire

Pay: $25/hr

Job Summary:
Under direct supervision, the Administrative Support Associate provides general administrative assistance to an individual or department. This role supports daily operations by performing a variety of clerical and organizational tasks and utilizing standard business software applications.

Key Responsibilities:

• Provide administrative support to staff or department as assigned

• Prepare, edit, and format documents using word processing, spreadsheet, and presentation software

• Assist with data entry, filing, scanning, and record maintenance

• Manage calendars, schedule meetings, and coordinate appointments as needed

• Answer phones, route calls, and respond to basic inquiries

• Support general office operations and special projects as assigned

Qualifications:

• High school diploma or equivalent required

• Previous administrative or office support experience preferred

• Proficiency in Microsoft Office or similar business software (Word, Excel, PowerPoint)

• Strong organizational skills and attention to detail

• Ability to follow instructions and work effectively under direct supervision

• Professional communication skills, both written and verbal

Work Environment:

• Office-based position

• Fast-paced, team-oriented setting

Make the move and apply today!  Experience firsthand why ProLogistix consistently earns ClearlyRated’s Best of Staffing® Talent Award for providing superior service to job seekers.

“Most awesome agency ever on this planet!” Nicanor, ProLogistix Associate

We Require Our Customers to Offer:

• Safe and clean work environment
• Employee focused workplace
• Safety programs and training

Updated resume with relevant Administrative experience 

The Warehouse Associate supports daily operations in the warehouse to ensure the efficient and accurate handling of automotive parts, components, and materials. This role is essential in maintaining inventory accuracy, preparing orders, and supporting receiving and shipping functions to meet production and delivery requirements.

Material Handler/ Machine Operator 
8 hour, rotating shifts 

Columbus, Georgia 

Job Requirements

• Minimum 2 years relevant forklift experience
• Machine Operator experience
• 12 hour, weekly rotating shifts as well as a couple 8 hour weekly rotating shifts. 
• Attention to detail
• Able to use basic hand and power tools
• Basic Math
• Mechanical aptitude
• Basic computer skills

Job Responsibilities

• Follow safety guidelines
• Follow standard work instructions as assigned
• Experience on Forklift or other industrial equipment, a plus
• Perform hands-on tasks
• Lift up to 50lbs, stand, bend, and reach
• Maintain clean and organized workspace
• Troubleshoot equipment issues
• Meet production standards
• Work in a team environment
• Accurate record-keeping and inventory documentation
• Inspection of product
• Storing, moving, and managing materials

• Previous Forklift experience required
• Must have warehouse experience
• Must have Computer Experience 
• Must be able to stand for long periods of time

We are in immediate need of a hardworking, detail-oriented forklift operator with basic computer skills. Join the ResourceMFG team and enjoy competitive weekly pay, benefits, and the opportunity for FREE online skills training after 80 completed work hours!

Isn’t it time you work for a company that wants to see you get ahead! FREE skills training for associates who complete 80 hrs. of work. Apply with us today!

“They placed me in the perfect job. ResourceMFG is the best!” Resource Associate, Callie

We Require Our Customers to Offer:

• Safe and clean work environment
• Employee focused workplace
• Safety programs and training

As a ResourceMFG Materials Handler We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

Working for ResourceMFG

Level II NDT

Liquid Penetrant / Mag Particle

Dayton, TX

Level II NDT needed in Dayton! Looking for skilled professional qualified to perform and interpret non-destructive testing such as mag particle and liquid penetrant according to established procedures. Will be responsible for setting up equipment, conducting inspections, evaluating results, and reporting findings.

For You…

• 1st Shift – Typically 7am – 4:30pm, Mon – Fri, expect overtime
• Pay is $30 – 35+ Depending on experience and what you can bring to the table
• Fantastic Team
• Very cool perks!  Let’s talk!

3 - 5 Years Experience - 

• Level II NDT - Liquid Penetrant
• Level II NDT - Mag Particle
• Basic Dimensional
• Mics and Calipers
• Computer Literate
• Reporting
• Assist with other duties as needed by Manager 

HR/ Administrative Assistant

Prattville, AL

8:00AM-5:00PM Monday-Friday

A manufacturing company located in Prattville, Alabama is seeking a reliable and detail-oriented HR / Administrative Assistant to support day-to-day human resources and general office operations. This position is ideal for someone who is organized, professional, and comfortable handling sensitive information. This is a temporary-to-permanent opportunity, with the potential for direct hire based on performance and business needs.

Key Responsibilities

• Assist with HR-related paperwork, filing, and document management
• Support onboarding and employee records administration
• Perform general office and administrative duties as needed
• Enter and maintain employee data within the company’s HRIS (Dayforce)
• Maintain confidentiality when handling employee and company information
• Provide administrative support to HR and management teams

Qualifications

• High school diploma or equivalent required
• No college degree required
• Prior administrative or office experience preferred
• Basic understanding of HR confidentiality practices is helpful
• Strong organizational skills and attention to detail
• Comfortable working with computer systems and learning new software
• Ability to handle sensitive information with discretion and professionalism

Experience with HRIS systems such as Dayforce is a plus but not required; training will be provided.

Additional Information

• This role is a full-time, temp-to-perm position
• Opportunity for permanent placement based on satisfactory performance
• Competitive hourly pay starting at $25.00/hour

 A updated, current resume is required. 

We are seeking a reliable and skilled Machine Turret/Brake Press Operator to join our 3rd shift production team.

In this role, you will operate CNC turret punch presses and/or brake press machines to fabricate metal components according to specifications. This is a hands-on role ideal for individuals with strong attention to detail and mechanical aptitude.

Shift: Overnight Shift | 9:30 PM – 6:00 AM (Monday – Friday), some Saturday’s mandatory OT.  

Please note: This position requires 2–3 weeks of training on 2nd shift (typically 1:30 PM – 10:00 PM) before transitioning to 3rd shift.

Key Responsibilities:

• Operate CNC turret and/or brake press machines safely and efficiently

• Read and interpret blueprints, work orders, and production schedules

• Set up machines, perform tool changes, and adjust settings as needed

• Inspect parts to ensure quality and accuracy per specifications

• Maintain a clean and organized work area

• Report any machine malfunctions or safety issues to supervision

• Follow all company safety protocols and procedures

Benefits of working with us:

• Health, Vision and Dental Insurance
• Weekly pay
• Long term job opportunities with stability
• 40 hours plus over-time when needed
  

 #nowhiring

Requirements:

• High school diploma or GED preferred

• Prior experience operating turret punch or brake press machines (CNC preferred)

• Ability to read blueprints and use basic measurement tools (calipers, micrometers, etc.)

• Strong mechanical aptitude and attention to detail

• Ability to lift up to 50 lbs and stand for long periods

• Willingness to work 3rd shift and complete training on 2nd shift

We are seeking a reliable and skilled Machine Turret/Brake Press Operators!

In this role, you will operate CNC turret punch presses and/or brake press machines to fabricate metal components according to specifications. This is a hands-on role ideal for individuals with strong attention to detail and mechanical aptitude.

Shift:  Day shift:| 6am – 2:30pm (Monday – Friday), some Saturday’s mandatory OT.  Pay: $17.57/hr.

           Evening shift: 2pm – 10:30pm (Monday – Friday) some Saturday’s mandatory OT.  Pay: $19.07/hr. 

Key Responsibilities:

• Operate CNC turret and/or brake press machines safely and efficiently

• Read and interpret blueprints, work orders, and production schedules

• Set up machines, perform tool changes, and adjust settings as needed

• Inspect parts to ensure quality and accuracy per specifications

• Maintain a clean and organized work area

• Report any machine malfunctions or safety issues to supervision

• Follow all company safety protocols and procedures

Benefits of working with us:

• Health, Vision and Dental Insurance
• Weekly pay
• Long term job opportunities with stability
• 40 hours plus over-time when needed
  

 #nowhiring

Requirements:

• High school diploma or GED preferred

• Prior experience operating turret punch or brake press machines (CNC preferred)

• Ability to read blueprints and use basic measurement tools (calipers, micrometers, etc.)

• Strong mechanical aptitude and attention to detail

• Ability to lift up to 50 lbs and stand for long periods

Forklift Operators Needed in the East Side of El Paso

• $15/hr
• 1st shift 6AM – 2:30PM
• Benefits: Medical, Dental, & Vision Insurance
• 401k Retirement Plan Available
• Weekly Pay
• Direct Deposit Available

Job Responsibilities:

• Operate powered industrial trucks to load and unload materials and deliveries and move them to and from storage areas, machines and loading docks, to trucks or storage facilities.
• Examine products to verify conformance to quality standards.
• Review copies of production or shipping orders and transport material to and from the designated areas.
• Load and unload goods from vehicles.
• Adheres to all quality guidelines Applies acquired knowledge and skills to complete standard tasks Readily learns and applies new information and methods to work in assigned area Maintains appropriate licenses, training, and certifications.

Click Apply Now!

#nowhiring

• Ability to work standing long hours.
• Ability to lift 30 + lbs.
• Ability to read, write and follow written and verbal instructions.
• Basic Computer Knowledge
• Ability to perform required functions with a minimum of direct supervision in task of routine
• High School Diploma or GED required

Select Staffing has great opportunities for a Welders in Chatsworth, CA within an aerospace manufacturing company.

Schedule: M-F 7am-3:30pm w/OT Saturday/ 7am-12noon

Hourly rate: $23hr-$27hr

Job Summary:

We are seeking a skilled and experienced Welder with expertise in GTAW (TIG) welding processes to join our team. The ideal candidate will be qualified to weld steel, stainless steel, and aluminum to meet high-quality standards and specifications.

Key Responsibilities:

• Perform GTAW (TIG) welding on steel, stainless steel, and aluminum materials according to project specifications.

• Interpret blueprints, drawings, and technical instructions to ensure accuracy in welding tasks.

• Prepare materials for welding by cleaning, cutting, and shaping as required.

• Conduct quality inspections of completed welds to ensure compliance with standards.

• Maintain a clean and safe work environment, adhering to all company safety protocols.

• Operate and maintain welding equipment, tools, and machinery in optimal condition.

• Collaborate with the team to meet project deadlines and production goals. Qualifications

• Proven experience as a GTAW (TIG) Welder.

• Proficiency in welding steel, stainless steel, and aluminum.

• Ability to read and interpret blueprints and welding symbols.

• Strong attention to detail and commitment to quality workmanship.

• Familiarity with safety standards and procedures in a welding environment.

• [Optional] Certification(s) in welding (e.g., AWS, ASME) is a plus but not necessary. Physical Requirements

• Ability to lift up to 40pounds

• Comfortable working in various conditions, including heat and confined spaces.

• Strong hand-eye coordination and manual dexterity.

Qualifications

• Proven experience as a GTAW (TIG) Welder.

• Proficiency in welding steel, stainless steel, and aluminum.

• Ability to read and interpret blueprints and welding symbols.

• Strong attention to detail and commitment to quality workmanship.

• Familiarity with safety standards and procedures in a welding environment.

• [Optional] Certification(s) in welding (e.g., AWS, ASME) is a plus but not necessary.

Physical Requirements

• Ability to lift up to 40pounds

• Comfortable working in various conditions, including heat and confined spaces.

• Strong hand-eye coordination and manual dexterity.

Chatsworth is looking for Electrical Assemblers working in an aerospace company. 

Pay Rate: $19.00 – $21.00 per hour 
Hours: 7:00 am to 3:30 pm 
Schedules: Monday to Friday

Job Summary: 

Perform electrical panel assembly including component preparation, wiring, soldering, wire harness assembly.
*Read and understand electrical schematics as well as written and verbal instructions to perform 
assembly.
* Demonstrated attention to detail, quality and accuracy, effective organization skills, and creative 
problem solver.
* Use hand tools such as crimpers, cutters, screwdriver to perform the work.
*The applicants must be reliable and have communications skills with a strong team player 
attitude.

*Minimum 1 yr. experience in electrical assembly. 

Manufacturing Company is looking for a Painter Lead in Chatsworth.

Pay Range:$25-$27.00 per hour.

Temp to Hire (Full Time) 

Hours: 7am – 3:30pm 

Painter Lead is responsible for leading painting operations and applying high-quality paint finishes to a wide range of parts and assemblies. This role requires hands-on expertise in paint preparation, application, and curing processes, as well as oversight of workflow, safety, and quality standards.

Key Performance Deliverables

• Prepare and clean surfaces by sanding, wiping, and applying appropriate solvent treatments.

• Mask and protect surfaces as required for painting.

• Load and off-load parts onto and from paint racks safely.

• Mix and prepare primers and paints per manufacturers’ specifications, including gloss, semi-gloss, and flat finishes.

• Verify proper surface treatment and preparation prior to painting.

• Apply primer and paint by spray equipment on parts of varying sizes, shapes, and contours.

• Operate curing ovens; monitor temperature and cycle times to ensure proper curing.

• Perform visual inspections on painted parts to ensure compliance with quality standards.

• Clean and maintain paint booth equipment, including spray guns, filters, and related apparatus.

• Lead by example, driving continuous improvement in production processes and quality control.

• Ensure adherence to company policies, procedures, safety regulations, and quality system requirements.

• Promote and maintain a safe, clean, and organized work environment.

• Provide guidance and support to team members, ensuring efficient workflow and task completion.

Requirements

• 5–10 years of experience in a paint shop environment, preferably within the aerospace or automotive industry.

• Strong attention to detail and a high standard for quality.

• Demonstrated ability to mix and prepare a variety of paint and primer formulations.

• Basic understanding of blueprints, engineering drawings, and work order documentation.

• Ability to pass a respiratory fit test and pulmonary function test, if required.

• Capable of lifting up to 40 lbs.

• Leadership ability to support, guide, and train team members while ensuring production goals are met.

Preferred Qualifications

• Experience with powder coating processes and equipment.

• Knowledge of environmental, health, and safety regulations related to paint shop operations.

• Familiarity with lean manufacturing or continuous improvement practices.

• Previous supervisory or lead experience in a production environment.

• Proficiency in using inspection tools and equipment to verify coating thickness and quality.

Immediate Opening for Warehouse Order Puller , Picker and Packer 

Performance to hire role offering weekly pay!

2nd shift working Sun-Thursday

• Sunday-11am-end of production
• Monday-Thursday-1:30pm-end of production

Order Puller is responsible for:

• Pulling product to stock vending machines orders for delivery
• Ensuring accurate product is being pulled
• Other warehouse duties as assigned

Interested APPLY NOW!

#nowhiring

Ability to lift up to 50lbs

Ability to work in non climate controlled setting

Commitment to attendance and punctuality

Ability to work independently 

#nowhiring

Machine Operator – Fuquay-Varina, NC

Pay: $17/hr
Shifts: 1st and 2nd Shift Available

A growing manufacturing company in the Fuquay-Varina area is seeking dependable and detail-oriented Machine Operators to join their production team. This role is ideal for individuals who enjoy hands-on work, take pride in accuracy, and thrive in a fast-paced environment.

Key Responsibilities

• Operate production machinery safely and efficiently
• Monitor machine performance and make basic adjustments as needed
• Inspect finished products for quality and accuracy
• Load raw materials and ensure machines are properly set up
• Maintain a clean and organized work area
• Follow all safety guidelines and company procedures
• Complete production logs and documentation
• Assist with general manufacturing tasks as required

Qualifications

• Previous machine operation or manufacturing experience preferred
• Ability to stand for extended periods and lift up to 50 lbs
• Strong attention to detail and quality standards
• Basic mechanical aptitude
• Ability to follow written and verbal instructions
• Reliable, punctual, and able to work independently or as part of a team

Benefits

• Weekly pay
• Stable, full-time hours
• Opportunity for long-term employment
• Supportive team environment

ResourceMFG is now hiring a Part-Time Warehouse Associate in Maryville, TN. 

Schedule: 9AM-4:30PM 

Weekly Hours: Between 20-30 hours per week (workload dependent)

Pay: $15/hr

Warehouse Duties:

• Repack parts per company standards (primary)
• Quality inspection of parts as needed
• Continuous lifting and bending
• Clean and organize work area as needed
• Follow safety policies as instructed
• Able to walk between work area, reach, bend, lift, pull and push as necessary to carry items up to 40 lbs.

Requirements of this role:

• HSD/GED required 
• Must be comfortable being cross-trained 

Don't wait! Apply today and start ASAP.

Forklift Driver – Raleigh/Durham, NC

Pay: $18/hr and up
Shifts Available: 1st, 2nd, and 3rd

A leading client in the Raleigh–Durham area is seeking a reliable, experienced, and safety-focused Forklift Driver to join their growing team. This role requires proficiency with multiple types of equipment, including:

• Sit-down forklift
• Stand-up forklift
• Reach truck
• Cherry picker lift

Key Responsibilities of Forklift Operators

• Operate forklifts and warehouse equipment safely and efficiently
• Load, unload, move, stack, and organize materials and products
• Follow all safety procedures and company policies
• Perform daily forklift inspections and report maintenance or safety concerns
• Maintain accurate inventory records and support stock control
• Ensure materials are properly stored, labeled, and organized
• Assist with general warehouse duties as needed
• Keep work areas clean, orderly, and free of hazards

Why Work for EmployBridge?

EmployBridge is one of the nation’s largest workforce solutions providers, offering stability, opportunity, and long-term career growth. We connect talented people with meaningful work and support them every step of the way.

What Makes EmployBridge a Great Place to Work

• Career Opportunities: Access to a wide range of roles across multiple industries
• Support & Advocacy: Dedicated recruiters committed to your success
• Growth & Development: Build new skills and advance your career
• Weekly Pay & Benefits: Competitive wages, consistent pay schedules, and benefits for eligible employees
• Inclusive Culture: A commitment to diversity, equity, and opportunity for all
• Stability & Trust: A well-established organization with a strong reputation

At EmployBridge, we don’t just fill jobs — we help people build careers.

Qualifications

• Valid forklift certification (required)
• Previous forklift or warehouse experience
• Ability to lift up to 50 lbs
• Ability to stand, bend, stoop, and operate equipment for extended periods
• Strong attention to detail and commitment to safety
• Ability to follow instructions and work independently or as part of a team

If you’d like, I can also format this for a job board (Indeed, LinkedIn, ZipRecruiter), create a shorter version, or add branding elements.

Qualifications

• Previous Cherry Picker, Reach Truck, or Sit Down forklift experience
• Previous forklift or warehouse experience
• Ability to lift up to 50 lbs
• Ability to stand, bend, stoop, and operate equipment for extended periods
• Strong attention to detail and commitment to safety
• Ability to follow instructions and work independently or as part of a team

Are you an experienced Forklift and Stand Up Reach Operator? 

We are NOW HIRING IMMEDIATELY for ALL SHIFTS Shipping Forklift Drivers in Katy, TX!

Requirements for Stand Up Reach Forklift and Sit Down Forklift:

• 2-3 years forklift experience – Sit-Down forklift OR Stand Up Reach forklift.
• HS or equivalent required.
• Must be able to communicate effectively with all levels.
• Have problem solving skills, self-motivated, and have a flexible work schedule, standup forklift driver.

Responsibilities for Stand Up Reach Forklift and Sit Down Forklift:

• Drive stand-up (Reach) and sit-down forklifts to move pallets of product and other supplies
• Wrap finished products and prepare for shipment
• Unload enclosures
• Keep shipping area clean and organized
• Move enclosures to correct cells and areas utilizing overhead cranes
• Perform basic material handling activities: unloading trucks, receiving parts, material movements, order fulfilment, cycle counts and inventory error investigations.
• Analyze and recommend solutions to material control problems.
• Utilize power lifting equipment:  pallet jack, forklift, etc.
• Maintain a clean and safe work environment.
• Have sufficient knowledge of all equipment used by department and any safety requirements during its operation.

Schedule: Monday-Friday (Saturday’s and overtime as required) 

Pay: $16.98-$17.50 /hr. Paid weekly!

APPLY TODAY!

Requirements:

• HS or equivalent required.
• Must be able to communicate effectively with all levels.
• Have problem solving skills, self-motivated, and have a flexible work schedule, standup forklift driver.
• 2-3 years forklift experience - Sit-down AND Reach.

ResourceMFG is hiring a QA Assistant in Lafayette, IN!

Days: Monday-Friday

Hours: 9am-5:30pm with a 30 min unpaid lunch

*some flexibility with the work hours

Primary Responsibilities and Duties of the Job:

• Help keep the library organized and documents filed on shelves in order to assist in the retrieval of documents.
• Input document information into the library database.
• Prepare documents for off-site / on-site storage and send to appropriate locations when necessary under the guidance of the Evonik Document Services Assistant for the library.
• Purge records on shelves according to the site records retention schedule (when applicable) under the guidance of the Evonik Document Services Assistant for the library.
• Print, issue, and coil new laboratory notebooks.
• Process and assist in audits for retrieval of documents.

• High School Diploma or equivalent
• Resume required to interview
• Computer skills including basic MS Suite

ResourceMFG is hosting a Manufacturing Associate Hiring Event Wednesday, January 28nd, Wednesday, February 4th 10am-1pm. Mentor Library 8215 Mentor Ave, Mentor, OH 44060 . 

Various shifts available!

Date:  Wednesday, January 28th,2026 10am-3pm  

Location: Address:  Mentor Library 8215 Mentor Ave, Mentor, OH 44060

Time: 10:00am – 1:00pm

Apply Today!

CNC Lathe, Swiss & Mills Machinist – 1st & 2nd Shift

Position Overview
This role is ideal for a highly skilled machinist who thrives on producing complex, high-precision components. You’ll program, set up, and operate CNC Lathe, Swiss, and Milling equipment while ensuring efficiency, accuracy, and adherence to quality standards. The position is available on both 1st and 2nd shift.

Key Responsibilities
•     Program, set up, and machine a wide range of challenging components efficiently.
•     Review and process operations, including material sizing and workflow planning.
•     Create CNC programs for assigned operations.
•     Perform complete machine setups and verify readiness for production.
•     Establish appropriate in-process inspection procedures.
•     Machine both short-run and long-run complex component parts; perform on-machine deburring.
•     Select qualified personnel to assist with setups and production as needed.
•     Determine the most suitable machines for each job.
•     Collaborate with scheduling to ensure on-time delivery of all projects.
•     Monitor and document in-process inspection results.
•     Provide input for job estimating and quoting.
•     Communicate print or process questions to the Swiss Lead or account manager.
•     Identify proper deburring methods for all machined components.
•     Recommend and specify tooling purchases; design custom tooling when required.
•     Ensure all required documentation is completed accurately.
•     Identify and report nonconforming products or services.
•     Perform additional related duties as assigned.

#NowHiring

Education, Experience & Skills
•     5+ years of relevant machining experience, or an equivalent combination of education and experience.
•     Strong background machining complex components, especially in Aerospace, Medical, or Nuclear industries (preferred).
•     Experience with Citizen Swiss machines is a plus.
•     Ability to interpret complex blueprints, engineering drawings, and process documentation.
•     Strong problem-solving skills and attention to detail.
•     Ability to work independently and collaboratively in a fast-paced environment.

Physical Requirements
•     Ability to move throughout the facility as needed.
•     Ability to perform keyboarding tasks.
•     Clear verbal and written communication skills.

ResourceMFG is actively hiring Press Operators in Macedonia, OH.

1st, 2nd, 3rd shift available!

**Must train on 1st or 2nd for 1-3 months for off shift**

Job Description:

• Operate assigned machines
• Make adjustments in accordance with established procedures for machine operation.
• Consistently monitor quality of product to maintain quality standards
• Pull product samples during production to ensure quality of production
• Maintain production log to track detail of daily production

Why work for ResourceMFG?

• Weekly pay!
• Long-term, career-minded opportunities
• Medical, Dental and Vision benefits available
• Free online courses through Penn Foster

#nowhiring

Requirements:

• Manufacturing, industrial, factory, or production experience is required
• Ability to lift up to 35 lbs.
• Ability to stand for an 8-hour shift

Apply today!

#nowhiring

ResourceMFG is now hiring Electrical Assemblers for a large company in Twinsburg !!

Urgent Hiring!! 

All shifts available! Standard 8 hour shifts

Job duties:

• Perform electrical and electro-mechanical assembly of components, sub-assemblies, and finished products

• Cut, strip, crimp, label, and route wires and cable harnesses

• Install power, control, and signal wiring in panels or assemblies

• Perform hand soldering when required

Why work for ResourceMFG?

• Opportunity to advance
• Weekly pay!
• Long-term, career-minded opportunities
• Medical, Dental and Vision benefits available
• Free online courses through Penn Foster
• Retirement saving plans

#nowhiring

Requirements:

• Assembly experience 
• High School Diploma or equivalent 

Apply Now!

#nowhiring

Manufacturing Maintenance Technician

Schedule: 12-hour shifts, 4 on / 4 off, day shift (5AM–5PM)

Hourly Rate: $23.00–$35.00  – Shift Premium: Additional $1.00/hour for night shift

Location: Rogers, Minnesota

Position Overvie:

The Manufacturing Maintenance Technician supports the maintenance and reliability of production equipment throughout the facility. This role ensures machinery operates safely, efficiently, and consistently to meet production goals. The technician will troubleshoot issues, perform preventative maintenance, and support continuous improvement efforts across departments.

Minimum Qualifications

•     Vocational or community college degree in electrical, mechanical, or related field; or equivalent experience.

•     Preferably 3+ years of relevant maintenance experience.

•     Strong understanding of OSHA and EPA regulations related to plant operations.

•     Ability to operate and troubleshoot facility systems and equipment.

•     Skilled in performing system checks and diagnostics.

•     Strong organizational, communication, and time-management abilities.

•     Ability to read blueprints and schematics.

•     Extensive knowledge of electrical systems and wiring.

•     Proficient with test meters and diagnostic tools.

•     Mechanically inclined with strong analytical and problem-solving skills.

•     Ability to work in a fast-paced environment.

•     Valid driver’s license and reliable transportation.

#Nowhiring

Physical Requirements

•     Ability to distinguish color-coded wiring.

•     Extended periods of standing, kneeling, bending, and climbing.

•     Ability to lift up to 50 lbs.

•     Ability to bend, stretch, push, pull, and move to access and service machinery.

Production Associate in Paoli, IN 

1st shift – $16 per hour Mon-Fri (and 1 Saturday per month) 6am to 3:30pm
3rd Shift – $17.25 per hour Mon-Fri (and 1 Saturday per month) 7pm to 4:30am

We will train

Great Pay. Great People. Great Opportunity. Great Climate Controlled Facility

Job Responsibilities

• Follow safety guidelines
• Follow standard work instructions as assigned
• Perform hands-on tasks
• Lift up to 50lbs, stand, bend, and reach
• May utilize basic hand tools
• Maintain clean and organized workspace
• Identify and resolve problems concerning equipment and materials
• Ensure product meets customer specifications
• Meet production standards
• Work in a team environment
• Accurate recordkeeping and quality documentation

As a ResourceMFG Production Associate We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• FREE ONLINE skills training

Job Requirements

• An onsite tour and interview are required

ResourceMFG is hiring for Electronic Technicians on 1st Shift in Bloomington

Shift Day & Time:

7:00AM-3:30PM Monday-Friday. Some hours may vary on 1st based on the job. 

Pay Rate:

$16 per hour. 

Job Description:

• Troubleshoot and repair electronic products.
• Adhere to procedures and work instructions, achieve hourly production rates and minimum quality standards as defined in the Quality Objectives.
• Understand and follow the production flow process, continuous development of knowledge relating to product type and model identification.
• Adhere to company policies and required attendance guidelines, follow all safety requirements.
• Maintain a clean and orderly work space and inform Supervisor or Team Leader of recurring issues.
• Potential work in the shipping department when orders are needed. 
• Prepping product for shipment for a Indiana legacy. 

Job Requirements:

• Basic computer skills where applicable.
• Walking up to 1 to 3 miles per day. Up to 50 lbs lifting is required. 
• No diploma or GED needed.

Apply Now and Schedule Your Interview Within Minutes!

Position: Operator

Pay: $18 per hour

Shift: mornings – 7am-3pm, afternoon shift – 3pm-11pm 

We are looking to fill positions for a growing manufacturing company. The Operator position is responsible for setting up, operating, monitoring, and maintaining manufacturing equipment to ensure efficient production and high-quality output.

• Set up and operate machinery according to work instructions, safety standards, and production schedules

• Load raw materials and remove finished products from machines

• Monitor machine performance and make adjustments to ensure quality and efficiency

• Inspect parts for defects and ensure they meet specifications

• Perform routine maintenance, cleaning, and troubleshooting on equipment

• Document production counts, downtime, and quality checks

• Follow all safety procedures and wear required PPE

• Maintain a clean and organized work area

• Work with team members and supervisors to meet daily production goals

Machine Operator

An engine cooling systems manufacturer in Belmont, MI is looking to add a hard working machine operator to their team! Candidates will set up machinery and perform preventative maintenance on the machine.

Shift: 2:00pm-10:00pm Monday – Friday

Pay: $23.00/hr – $28.00/hr based on experience

Responsibilities:

CNC Machinist, 5-axis, work with very tight tolerances. Machining is done at the end of build process, so there is a need for experience/accuracy. Candidate should be able to set up jobs, make edits, troubleshoot with little assistance.

Other Duties as assigned

Must be able to lift up to 50 lbs.

Mechanical knowledge preferred

Benefits:

Direct Deposit available

Stable employment

FREE online college courses

Medical plans available