NDT Level II – QC Inspector

Job Summary:

Position requires performing visual inspection of welded parts and assemblies in accordance with the applicable design requirements

Duties:

• Visual inspection of welded parts and assemblies in accordance with the applicable design requirements.
• Interpretation of drawings, procedures, instructions, and specifications for determining the acceptance of the product undergoing examination.
• Perform dimensional inspection on piece parts and assemblies in accordance with applicable design documents within the manufacturing facility, at supplies, or at the customer site.
• Monitor and records results of component testing (hydrostatic testing, coating, etc.), witness, or process audits in accordance with documented procedures.
• Prepares non-conformance reports, where applicable, and completes all other documentation requirements.
• Ensure documentation of inspection and testing is performed.
• Assist in the training of other personnel as required by management or as required by the specific task being performed.

Requirements:

• Minimum 2+ year experience working within a manufacturing environment/facility.
• Will be expected to stand for 8–10-hour shifts.
• Resume required.

Pay: $26-34 depends on experience.

Shift: 1st shift Monday-Friday 6:00am to 4:30pm. 10 hour shifts. Saturdays when required.

#nowhiring

Instrument FitterPay rate: $24-$30 DOEShift: 1st (6am-4:30pm)Duties:*Run pneumatic tubing*Complete the layout of tubing on skids*Run tubing to the end devices*Bend tubing 1/4 – 1/2 inch thick*Read General adjustment and P&ID Drawings*Fabricate bracket braces and instrument racks as needed*Reading blueprints*Familiar with different types of tubing*Knowledge of end devices*Understanding of system flow*Performs required testing of tubing*Bending stainless steel Minimum 4 yrs experience Instrument Fitter

Inventory Control Specialist

Job Duties:

• Perform routine cycle counting of inventory.
• Develops, executes, and oversees annual, monthly, and weekly cycle  count planning for all inventory locations/warehouses.
• Assists in the planning and execution of annual physical inventory.
• Entry of transactional data into ERP system in an accurate and  timely fashion.
• Ensuring warehouse inventory balances are maintained at the  highest-level accuracy possible.
• Performs floor to book and book to floor counting of inventory.
• Compares and analyzes inventory balance discrepancies.
• Determines root cause analysis for inventory discrepancies.
• Prepares, maintains and distributes inventory metrics dashboard to  organization,
• Provides recommendations for process changes and technology changes  to improve inventory accuracy.
• Open bales, crates, and other containers.
• Assist in counting of  inventory.
• Weighing and counting items for distribution within plant to ensure conformance to company standards.
• Recording amounts of materials or items received or distributed via appropriates computer program.

Resume required

1st shift – 6am-4:30pm  

Pay – $21 – $27 depends on experience

#nowhiring

Machine Operators and Saw Operators

The machine operator is responsible for operating equipment such as bandsaws, lathes, milling machines, and grinders within the Piping & Structural Fabrication Departments.

Duties:

• Operate machinery such as saws, lathes, milling machines and grinders.
• Operate overhead cranes. 
• Maintain raw material inventories.
• Ability to read blueprints and follow product specification instructions.

Requirements:

• Minimum 2 years fabrication experience
• Able to lift up to 50 lbs
• Able to stand for 8-10 hour shifts
• Resume required

Pay: $20 -$25 depends on experience. 2nd shift differential pay.

Shift: 2nd shift – 5:30 pm – 3:30 am

Shift: 1st shift – 6:00am – 5:30pm

#nowhiring

Industrial Painter and Blaster

Our client who delivers packaged modular systems engineered and manufactured in one of our Houston facilities, which are utilized in data centers, power and commercial/industrial utility system applications.

Job Skills:

• Surface preparations & protective coatings applications on above ground piping; steel structures.
• Operate/maintain various blasting, spraying & other equipment.
• Ability to read read/interpret documents written in English.
• Application of paints & specialty coatings (epoxies, urethanes & zincs).
• Ability to utilize scaffolding, rigging, access, containment systems, & safety equipment.
• Experience with industrial coatings, application process, 2-part mixing process, HVLP equipment, consistent millage.

Minimum Requirements:

2-5 years of experience on industrial painting

Day shift and Night shifts available

1st shift – 6am – 5:30pm

2nd shift – 4:30pm – 2:30am. 2nd shift pay differential.

$22 – $25 depend on experience

Resume required

#nowhiring

Structural Welder

Structural Welders for our Centrally located client manufacturer of complex engineered skids.

• Structural welding in a shop environment.
• Ability to read blueprints, schematics Proficient with welding processes.
• Exceptional math and measurement skills.
• Qualified candidates must pass weld test 3G & 4G. MIG/Flux-core weld processes.
• Structural welding and fitting experience 3-5 years.
• Fit, cut and tack material.
• Prepare welding joints.
• Conventional and measuring instruments.
• Finish grinding applications using manual/power tools.
• Resume required.

1st shifts 6am to 6:30pm; Mon to Sat

2nd shifts 5:30pm to 4:00am; Mon to Sat. 2nd shift pay differential

Pay range: $25-$30 depends on experience

#nowhiring

Pipe Welder

Job Summary:

Pipe welder proficient in welding techniques

Duties: 

• Proficient in assigned welding techniques.
• Interpretation of mechanical drawings, including the ability to read weld symbols.
• Knowledge of wire and filler materials applications for various steel alloys, aluminum, and some exotic materials.
• Working knowledge of fixturing and weld set up parameters (amps, volts, etc.).
• Convention and precision measuring instruments.
• Process inspection, certification, and documentation. 
• Welding equipment maintenance and inspection.
• Finish grinding applications using manual and power tools.
• Safety and housekeeping.
• Other duties as assigned by supervisor.

Requirements: 

• Minimum 3+ year experience working within a manufacturing environment/facility 
• Able to lift up to 50 lbs.
• Able to stand for 8–10-hour shifts

Pay: $25-$32 depends on experience

Shift: 2nd shift – 6:00 pm – 5:30am, (flexible to 10-hour shifts/Saturdays required)

#nowhiring

Mechanical and Electrical Assemblers

Mechanical Assembler

• Perform manual processes to complete mechanical and sub-assemblies, using hand tools, and electronic and pneumatic tooling.
• Familiar with assembly and measuring tools, interpret visual aids and must be able to perform simple shop math.

Requirements: 

• Minimum one year working within a manufacturing environment. 
• Ability to read and interpret P&ID, ISO, and engineering assembly drawings
• Ability to read fabrications drawings is a plus
• May work at different workstations as production needs require or shift from one station to another during the assembly process.

Pay: $17 – $24; depends on experience

Shift: 1st shift 6:00 am – 5:30 pm. 10 to 12 hour shifts and Saturdays required.

Electrical Assembler

• Perform manual processes to complete mechanical and electrical assemblies and sub-assemblies, using hand, electric and pneumatic tooling
• Complete tasks as directed by manufacturing schedule with minimum supervision

Requirements:

• Familiarity with assembly and measuring tools, interpretation of visual aids and ability to perform simple shop math.
• Competency in reading and interpreting engineered drawings, schematics or other technical documents.

Pay: $21 – $27 depend on experience

Shift: 1st shift 6:00 am – 5:30 pm. 10 to 12 hour shifts and Saturdays required.

Have the ability to lift up to 50 lbs.

Expected to stand for 8–10 hour shifts

Facility is a non-climate-controlled environment

#nowhiring

Pipe Fitters

Pipe Fitters for day or night positions

Job Summary:

Pipe Fitter lay out, assemble, install and maintain pipe systems, pipe supports, and related hydraulic and pneumatic equipment.

Duties:

• Interpretation of mechanical drawings, including the ability to read weld symbols
• Knowledge of wire and filler materials applications for various steel alloys, aluminum, and some exotic materials
• Working knowledge of fixturing and weld set up parameters (amps, volts, etc.)
• Convention and precision measuring instruments
• Process inspection, certification, and documentation
• Welding equipment maintenance and inspection
• Finish grinding applications using manual and power tools
• Safety and housekeeping
• Other duties as assigned by supervisor

Requirements:

• Minimum 3+ year experience working within a manufacturing environment/facility
• Be prepared to stand for 8–10-12 hour shifts
• Resume required

Pay: $25-$33 depends on experience. 2nd shift differential.

Shift: 1st shift – 6am – 6:00pm (flexible to work 10/12 hours)

Shift: 2nd shift – 4:30 pm – 3:30 am (flexible to 10-hour shifts/Saturdays required)

#nowhiring

ResourceMFG is hiring Machine Operators in the Ogden area

Shifts:

Day shift: 5am-1:30pm Monday-Friday

Night shift: 9pm-5:30am Sunday-Thursday

Job Duties:

• Operating encapsulation machines
• Preparing and maintaining daily records.
• Labels ingredients and complete all paperwork
• Follow all SOP’s and cGMP requirements

Operator Duties:

• Work in a fast pace environment, monitoring and running machinery to ensure it functions properly
• Nutraceutical manufacturing environment 
• Conduct quality checks periodically.

#nowhiring

• Machine operator experience
• Good attendance
• Reliable transportation
• Able to lift up to 50 pounds
• Able to read & write english
• Comfortable working in a dusty environment

Employbridge Is in search of Standup Reach/ Sitdown/ And Cherry Picker Forklift Operators!

• Schedule 7am – 3:30 pm
• 8am – 5:00pm
• 3:30pm-11:00pm
• Pay: $18-19 Per hour

Position Overview

General Description:

The QA Document Control Specialist is responsible for the maintenance of the Quality Assurance records and documentation.

Specific Responsibilities & Duties:

·        Promotes a safe working environment and adheres to Health, Safety and Environmental procedures, company safety rules, Current Good Manufacturing Practices (cGMP’s), and Standard Operating Procedures (SOP’s) at all times.

·        Verifies that each record is accurate and complete, in compliance with GMP practices.

·        Assembles Production Records by batch.

·        Ensures documentation is review and meets all required testing prior of releasing product in QAD.

·        Prepares Documentation for (B, M, E) samples prior to send to customer for review and approval.

·        Prepares and review Certificate of Analysis.

·        Reviews OTC production reconciliation.

·        Prepares and review Certificate of Manufacture.

·        Prepares labels for customer samples. 

·        Assists other departments when needed.

·        Tracks and reports FG OTC annual product review.

·        Replies/follows up with e-mails and/or customer requests.

·        Monitors releases in QC status for more than 5 days and provide feedback on status.

·        Reviews documentation and releases to ensure completeness and proper GDP documentation.

·        Gathers and collect information as needed from other departments.

·        Performs additional duties as instructed by QA Assurance Supervisor.

#NOWHIRING

Lead and supervise up to 30+ production staff within a cosmetic manufacturing environment.

•            Will be overlooking 2-5 production lines at a time

•            As a line lead would overlook fulltime and temporary employees.

•            Ensuring daily job production orders are completed to company and clients’ standards.

•            Ensure that production line have the necessary equipment pre-production.

•            Know what each product requires to be properly assembled and packaged.

•            Ensure production areas are maintain clear and clean to ensure safe work environment.

•            Ensure that all SOP’s and GMP’s are followed by everyone in the production floor.

•            Interact with Production Management and QA department to ensure production quality and

schedules are on track.

Call line mechanics when production machinery breaks down or need them to look at a possible issue.

•            Ensure that the first pass quality levels meet or exceed departmental goals.

•            Assist Area Managers in training all employees on quality requirements.

•            Redirect support staff as necessary.

•            Bilingual in English and Spanish a plus.

Requirements

•            1-2 years of Production Line lead experience (Cosmetic Industry or Personal Care a plus)

•            HS Diploma or GED

•            Able to read, write and communicate in English

#NOWHIRING

Large Manufacturing Company in Chatsworth is looking for Maintenance Helpers.

2nd Shift Hours: 2:30pm – 11:00pm

1st Shift Hours: 6:00am – 2:30pm

Temp to Hire

Full Time hours.

·        Responsible for the efficient and safe setup and changeover of production lines for cosmetic manufacturing. This included connecting and disconnecting equipment, ensuring proper alignment and functionality, and troubleshooting any mechanical issues that arise during the setup process.

·        Set up production lines according to work orders and specifications, including connecting machinery, plumbing, and other necessary components.

·        Performed equipment changeovers, ensuring timely and accurate transitions between product runs.

·        Inspected equipment for damage or wear and perform basic maintenance as needed.

·        Troubleshooted mechanical issues during setup and make necessary adjustments to ensure proper operation.

·        Collaborated with production and maintenance teams to optimize line efficiency.

·        Adhered to all safety protocols and quality standards.

• Responded to production calls for pump issues and leaks, troubleshooting problems.
• Worked with diaphragm, Waukesha, and drum pumps.
• Maintained a clean production floor to ensure safety and prevent accidents.
• Operated various forklifts and pallet jacks.

?

#NOWHIRING

Pay: $19.00 per hour

Temp to Hire (Full Time)

Mail Clerk Responsibilities

• Sort, organize, and distribute incoming mail to the appropriate departments and recipients.
• Process and log incoming and outgoing mail, including date and time stamping when required.
• Prepare outgoing shipments by weighing packages, calculating postage, and coordinating deliveries through USPS, FedEx, UPS, and other carriers.
• Operate mailroom equipment, including scanners, fax machines, postage meters, and automated mail-processing systems.
• Ensure the security and confidentiality of sensitive mail and inspect packages for prohibited items when applicable.
• Provide mailroom customer service support, including answering employee inquiries and assisting with shipping and mailing requests.
• Assist with bulk mail projects, quality control processes, recordkeeping, and other administrative tasks as needed.
• Maintain an organized, efficient, and compliant mailroom environment while meeting daily service deadlines.

#NOWHIRING

Large manufacturing Company is looking for a Receiving Clerk.

Hours: 6am – 2:30pm

Pay: $19.06 per hour

Full Time Hours

Temp to Hire

Specific Responsibilities & Duties:

·        Processes order instructions correctly

·        Wraps the complete pallets to ensure security during transit

·        Inspect product for damages; report as needed

·        Unloads inbound shipments (Finished Goods and Components)

·        Segregates goods according to quality status

·        Ensures inbound product are accurate and free of damage. Reports quantity variances and quality concerns.

·        Safely moves or stacks product to storage locations

·        Put-away of goods to rack location or components to designated areas.

·        Pull, stage, and pick of shipping orders (IBI, PPK, PDL, and PIC)

·        Ensures accuracy of P/L vs physical material pulled per shipping order.

·        Responsible for placing release labels on all product staged and picked to ship.

·        Efficiently moves product from staging and/or storage areas and loads into railcars, bobtails, trailers, or ocean containers

·        Verifies all shipments for accuracy prior loading

·        Stages of all goods issued for disposal

·        Audits trailer location, staging locations to ensure proper transition of goods. (IBL, PRV, and IBI)

#NOWHIRING

Large Manufacturing Company in Chatsworth is looking for Maintenance Helpers.

2nd Shift Hours: 2:30pm – 11:00pm

1st Shift Hours: 6:00am – 2:30pm

Temp to Hire

Full Time hours.

·        Responsible for the efficient and safe setup and changeover of production lines for cosmetic manufacturing. This included connecting and disconnecting equipment, ensuring proper alignment and functionality, and troubleshooting any mechanical issues that arise during the setup process.

·        Set up production lines according to work orders and specifications, including connecting machinery, plumbing, and other necessary components.

·        Performed equipment changeovers, ensuring timely and accurate transitions between product runs.

·        Inspected equipment for damage or wear and perform basic maintenance as needed.

·        Troubleshooted mechanical issues during setup and make necessary adjustments to ensure proper operation.

·        Collaborated with production and maintenance teams to optimize line efficiency.

·        Adhered to all safety protocols and quality standards.

• Responded to production calls for pump issues and leaks, troubleshooting problems.
• Worked with diaphragm, Waukesha, and drum pumps.
• Maintained a clean production floor to ensure safety and prevent accidents.
• Operated various forklifts and pallet jacks.

?

#NOWHIRING

Start Fresh in a Cool Environment – Now Hiring Seafood Production Associates

Join a leading seafood distribution company as a Seafood Production Associate. This is a great entry-level opportunity to build experience, earn reliable pay, and grow your skills in a hands-on environment.

Position Details

• Title: Seafood Production Associate
• Location: Burlington, WA
• Schedule: Monday–Friday, 7:30 AM–4:00 PM
• Pay: $18.00/hour
• Employment Type: Full-Time, Temp-to-Hire
• Overtime: Available

Position Overview

ResourceMFG is seeking motivated individuals to join a seafood production team. In this role, you will work in a cold storage facility preparing fresh and frozen seafood products while supporting daily warehouse operations. This is an ideal position for someone who is dependable, detail-oriented, and comfortable working in a chilled environment.

Key Responsibilities

• Clean and prepare fresh and frozen fish and crab
• Package seafood products accurately and efficiently
• Load and unload shipments as needed
• Maintain sanitation standards and follow food safety guidelines
• Assist with inventory tracking and organization
• Keep work areas clean, organized, and safe
• Follow company policies and production procedures

#nowhiring

-

ProLogistix is seeking an experienced Forklift Operator (Sit-Down) for a well-established seafood processing and cold storage company in Burlington, WA.

Shift: Monday–Friday, 7:00 AM–4:00 PM

Pay: $19.50

Type: Temp-to-Hire 

This is a cold storage facility. Associates must be comfortable working in refrigerated, sometimes wet conditions.

 Primary Duties

• Product movement — transporting and weighing product between production lines, freezers, and coolers
• Truck loading and unloading using a sit-down forklift
• Shipping and receiving — completing paperwork accurately and neatly
• General warehouse support as needed
• Working safely in a cold, wet environment

Job Requirements

• Excellent attendance and reliability
• At least 18 years of age
• 1+ year sit-down forklift experience preferred

#nowhiring

Transporting and weighing product between production lines, freezers, and coolers

Let us help YOU build your Career!  ResourceMFG is currently seeking assemblers at Boston Scientific in Spencer, IN.Se habla español!!Shifts Available1st Shift – 6am to 3:00pm, Mon-Fri w/ OT on Sat-$16.00hrProduct Builder ResponsibilitiesAssemble small medical devices using small plastic pieces and small wires.Raises atypical observations and notifies management/quality as required.Identifies and raise opportunities for procedural improvements. Supports continuous improvement initiatives.Operate in a clean room environment within required gowning, aseptic behaviors, and proper flow procedures; performs general cleanroom housekeeping, including room and equipment cleaning(s), disposal of trash and recyclables, and adherence to 5S standards.Addresses corrections to all executed documentation in a timely manner to support lot release.Perform basic math skillsOther duties as assignedJob RequirementsHigh school diploma, HSE or GED is required3 months or greater of manufacturing experience Must be able to read and write in English/SpanishOutstanding Benefits Available:Career Growth Potential Weekly Pay with Direct Deposit optionsMedical, Dental, Vision, AD&D available401KAwesome on-site Cafeteria On-site Gym Credit Union on-siteFree YMCA membership#nowhiring

📢 NOW HIRING – MULTIPLE POSITIONS (1st & 2nd Shift)

Location: Aberdeen, NC

Employer: ResourceMFG

Shifts:

• 1st Shift: 5:00 AM – 3:30 PM (Mon–Thurs)
• 2nd Shift: 3:00 PM – 2:30 AM (Mon–Thurs)
• Pay: $14.50 – $16.00/hour
• 📄 Resume Required

Open Positions

• Packers
• Machine Operators (preferred)
• Welders
• Paint Line Helpers

Job Requirements:

2+ years of manufacturing experience

Experience in one or more of the listed positions

Skills and experience must be clearly shown on resume

Strong work history – no job hoppers

Ability to read/interpret blueprints or schematics (preferred)

Ability to work 10+ hour shifts

Must be comfortable working in a non–climate-controlled environment

Key ResponsibilitiesUnload, depalletize, and transport server racks and materials to designated locations.Receive, inspect, and process incoming deliveries.Pick, pack, dispatch, unbox, and re-box inventory items.Assist with inventory tracking, cycle counts, and record accuracy.Respond to receipt and task-related inquiries.Maintain warehouse cleanliness, organization, and safety standards.Operate forklifts, pallet jacks, electric tugs, and other material-handling equipment.Perform additional duties as assigned.QualificationsHigh school diploma or GED required.Ability to lift, push, or pull up to 50 lbs.Experience operating material-handling equipment preferred.Strong teamwork and communication skills.Ability to work overtime or varying shifts as needed.Ability to read and follow safety procedures, operating instructions, and process documentation.Quality & SafetyFollow all safety, quality, and integrated management system requirements.Ensure accuracy, compliance, and a safe working environment.

EmployBridge is hiring for Sit Down Forklift Operators in Bowling Green, OH!

We’re looking for Sit Down Forklift Operators to support a premier client. These are forklift operator opportunities that require experience as a Sit Down Forklift Operator.

Shift: Monday-Friday 8am-5pm

Pay: $21.50 an hour

Job Duties as a Sit Down Forklift Operator:

• Operate a sit down forklift 
• Load and unload material within a warehouse or storage facility
• Follow safety guidelines
• Operate in narrow aisles
• Use handheld scanners or onboard computers
• Stand for an entire shift
• Follow warehouse systems and processes
• Consistently meet productivity standards

As a Forklift Operator for ProLogistix, we offer you:

• Weekly pay!
• Access to health benefits
• FREE online skills testing
• Unlimited referral bonuses

Come Join our Growing Team! Apply Now!

6 Months Forklift

Job Title: Stock Clerk/Warehouse 

Compensation: $12.00/hour 

Work Schedule: 9:00AM- 5:00PM Tuesday-Friday and Saturdays 8:00AM – 4:50PM

Job Description:

• Take merchandise from warehouse to place on sales floor
• Load and unload trucks
• Stock shelves
• Moving furniture
• Greet customers
• Perform other duties as assigned
• Maintain a clean and safe work area
• Adhere to all safety rules

Temp to Hire: Possibility of other opportunities in the future depend on performance

Benefits:* Medical Plans Available* Referral Bonus* Career advancement opportunities – FREE online college coursesJob Requirements:* Must have six months prior experience with stocking products* Heavy lifting may be required occasionally* Standing, bending, lifting is required

This position is responsible for the effective utilization of materials, equipment, and systems in the assembly of moderately complex to very complex electro-mechanical products. This position customizes and installs Custom Bus into the Switchboard cabinetry. 

Read and understand moderately complex to very complex schematics/blueprints, wiring diagrams, bill of materials, and schematics.
Assemble medium sized to large parts.
Utilizes a wide variety of hand tools, air tools, and measuring equipment.
Performs entire custom Bus operation of one job from start to finish.
Utilizes computer system for clocking start and finish of job.
Responsible for own product quality and check, proper measuring techniques, and tool use and care.
Quarantines non-conforming products according to standards and determines the disposition of the product in question.
Evaluates and performs basic troubleshooting, and obtains support from supervision, and engineering as needed. Will enter Andon’s in the LDS (Lean Digitization System) as required.
May periodically provide input to supervision, engineering, and quality groups relative to product improvement.
Establishes and maintains a safe and healthy working environment in accordance with OHSA requirements.
Maintains all certifications required by group(s) and completes all required training.
Daily 5S is a requirement.
Performs other tasks as may be required (and often in other groups).

Assembling electrical panels and breaker boxes on industrial scale

ResourceMFG is looking for a Maintenance Technician in CLINTON PA 

2nd Shift 3:30pm-12:00am Mon- Fri

Pay $25.00 – $30.00

Maintenance Technician Job Duties:

• Looking for someone with a mechanical background.
• Installing and maintaining equipment. 
• Perform mechanical, electrical, hydraulic, and pneumatic troubleshooting and repair as necessary.
• Hand power tool Knowledge. 
• Forklift experience.
• Troubleshoot electrical controls systems including motors and PLC’s.

#nowhiring

Apply Today 

At ResourceMFG, we understand that searching for factory and manufacturing jobs can be trying. That’s why we slow down and get to know you, your goals, and your skill set, so we can match you with great opportunities.

We know that while looking for a new work opportunity, you want flexibility as well as the chance for career growth. You’re focused on bringing your strong work ethic to do the best work you can, and we’re focused on acknowledging you and your work ethic by offering rewards, referral bonuses, and great benefits. See our Job Seekers’ FAQ page for further information.

#nowhiring  

Hiring Immediately Experienced Optics Fabrication Technician

Multi Shifts/Pay $20-24 Depending on Experience/Shift 

Looking for a manufacturing job that’s close to home, pays well, has good benefits, and provides a chance to boost your skills? Your search ends here! ResourceMFG is hiring experienced technicians to join our team.

As a ResourceMFG Machine Operator We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan

Job Responsibilities

• Performs basic shaping process steps on medium difficult parts. 
• Beveling – capable of fabricating polished, double, and off-angle asymmetric bevels
• Blocking – pitch button, Norland transfer, steep singles, cold blocking, contacting, and alignment
• Grinding – Steep radius, cylinder, tight wedge, continuous
• Polishing – spindle, CP, double side, CNC polish
• Slurry Maintenance – maintains and measures established Baume and PH levels
• Pour pitch lap, cuts, and grooves lap
• Advanced print reading skills – can read and comprehend all fabrication specs
• Measurement skills include – Basic Zygo, understanding of fringe pattern, microscope, stereoscope, surface quality inspection, fiber light
• Performs other duties as assigned

#nowhiring

*

Logistics & Inventory

2nd or 3rd Shift

Clinton, TN – $19/hr

Individual contributor positioned within a customer’s location to fulfill daily receiving, stocking, issuing, and cycle counting of customer and/or inventory. They are responsible for maintaining a professional, clean and organized work environment.

• Unloads, receives and puts away incoming product, goods, tools and/or equipment; unpacks bales, crates, and other containers; checks for damage and for discrepancies between goods and invoices.

• Accurately sorts, labels, moves and stores items; places material or items on racks, shelves, or in bins according to predetermined sequence such as size, style, or product codes; arranges storage to optimize crib space.

• Issues product, goods, tools and/or equipment to site employees; documents and maintains accurate records for issued and returned items.

• Enters data into a database or other computerized system to maintain up-to-date stock records; retrieves stored information to respond to inquiries (e.g., inventory levels or delivery schedules.); documents discrepancies on an error log and seeks management advice on appropriate corrective action.

• Requests requisitions to replenish inventory.

• Assists with inventory level maintenance; performs cycle counts and prepares report results.

- Forklift & Cherry Picker experience

- Basic computer knowledge

- Strong communication and customer service skills

- Ability to work in a team environment and be self-motivated

#nowhiring

Now Hiring: Upholsterers – Norcross, GA

We are currently seeking experienced Distribution Associates for opportunities based in Norcross, GA.

We are looking for dependable, high-performing individuals who are committed to safety and ready to be part of a strong team.

Position Details:

• Location: Norcross Jimmy Carter/85 area
• Pay Rate: $17.00 – $18.00/hour (based on experience)
• Schedule: Monday – Friday
  • 1st Shift: 8:00 AM – 4:30 PM
• Responsibilities:

Receiving:

·      Received and unloads all incoming product shipments and materials.

·      Examines product, packaging and labeling for conformance to company  requirements.

·      Reviews the incoming shipment for accuracy with purchase order.

·      Properly stacks incoming goods on pallets.

Shipping:

·      Performs all picking functions ensuring that product picked conforms to order requirements.

·      Verifies shipping information.

·      Properly stages non-conforming product or components when identified at any phase of product movement.

·      Examines product, packaging and labeling for conformance to company specifications.

General:

·      Operates forklifts, electric pallet jacks, and other material handling equipment at required.

Qualifications:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Only serious applications will be considered.

1 year