Tulsa, Oklahoma

Resource Hiring Electronic Assembler Needed Immediately!

Pay: $18; per hour

Shift:  7am - 3:30pm; Monday through Friday

Job Duties:

• Hand soldering, solder touch-up and rework of a wide variety of thru-hole and SMT electronic assemblies. Preforming the soldering tasks per IPC-610 Class II & III Standards.

• Perform all responsibilities in areas of PCB assembly, preparing for solder, rework and inspection of boards.

• Knowledge of IPC-610 and J-STD-001 Workmanship Standards. Certification to IPC-610 & J-STD-001 is preferred.

• In-process inspection and solder touch-up of assemblies after reflow, solder touch-up of solder defects as identified by inspection.

• Visually inspect parts for quality prior and after assembly.

• Read and interpret assembly drawings and notes.

Job Requirements:

• Steel-toed boots
• IPC-610
• Soldering
• 2 years experience

ResourceMFG is hiring Stockroom Clerk in West Tulsa!

Hours: Mon-Fri 8am-5pm

Pay: $18 per hour

• Proficient knowledge of computers (will have a test)
• Readiness to learn a new ERP system
• Work in a fast-paced environment
• Detailed orientated 
• Stock shelves and rotate inventory
• Organizes new inventory
• Operate a forklift as time allows 

Job Requirements:

• Operate a pallet jack, cart and other various warehouse equipment
• Steel toed boots

ResourceMFG is hiring a Paint Prep helper in West Tulsa!

Hours: Mon-Fri 8am-5pm

Pay: $16-17/hour

Job Duties:

• Masking, sanding, grinding, prepping material for powder coating processes.
• Operate a forklift at times

Job Requirements:

• Steel toed boots

ResourceMFG is hiring Electronic Technicians in West Tulsa!

Hours: Mon-Fri 7am-4pm

Pay: $18-$21 per hour depending on experience

Job Requirements:

• Have a good working experience in electronics and/or has attended a technical school for electronics.
• Must be able to read schematic and be able to troubleshoot down to component level
• Must have basic to intermediate computer skills and working familiarity with Microsoft Office.
• Must have either the ability, or desire to learn, to solder. 

Job Requirements:

• Steel toe
• Schematics
• Intermediate computer skills/MS Office

ResourceMFG is hiring Structural & Vessel Welders at the Port of Catoosa!

HOURS: 5:45 am to 4:15 M-F and Saturday 5:45 am to 11:45 am

Pay: $24-30 depending on experience.

JOB DUTIES:

• Weld, layout and fit-up carbon steel and/or alloy steel based on construction drawings.
• Workmanship must meet Company standards for quality including radiographic repair rate.
• Productivity level must consistently equal the Company’s established productivity requirements, as defined by work instructions.

Job Requirements:

ABLE TO PASS WELD TESTS:

• Piping: 2’’ 6G Sch 80 GTAW (TIG) – 1hr Time Limit 6’’ 6G Sch 80 GTAW (TIG) or GMAW (Mig) stringer – Flux Core fill and cap – 1hr 45min Time Limit
• Vessels: 1’’ Plate – 2G Horizonal – FCAW (Fluxcore)– Carbon Arc the back out and fill – 1hr Time Limit 1’’ plate – 3G Vertical – GMAW (MIg) up hill or down stringer/FCAW (Fluxcore) fill and cap – 1hr Time Limit

ResourceMFG is hiring Production Line Operators to work in a warehouse in Pryor, Oklahoma.

* Send your resume to [email protected]

Excellent opportunity for growth and advancement!

Pay: $22.31 plus shift differential + increase Shift: Swing/Rotating 12 hour (8am-8pm, 8pm-8am)

Great commute for Claremore residents!

ESSENTIAL WAREHOUSE JOB FUNCTIONS:

• Line Setup Extruder operation/Machine operating
• Banding
• Packaging
• Driving/operating forklift
• Measure and verify that dimensional tolerances are within acceptable criteria (wall thickness, diameter and ovality) 

It’s true! Manufacturing employees like working for ResourceMFG twice as much as our competitors. Apply today and find out why!

Job Requirements:

Job Requirements:

• Math Reasoning Learning ability
• Communicate and work as a team
• High School Diploma or a GED

Check Out These Benefits Offered:

• Weekly Pay
• Dental, Medical and Vision Benefits
• LTD / STD Benefits
• Life and AD&D Insurance
• 401k Plan
  
• Referral Bonus
• Free Online Courses

We are hiring Structural Welders in West Tulsa.

Pay: $25-$29 per hour

Shift: Monday - Friday, 6am-4:30pm and half a day on Saturday

• Pressure vessels and steel manufacturing
• 3G Mig with Flux core Fill and cap
• Visual Test

*send your resume to [email protected] and weld test this week!

Job Requirements:

• Read Prints
• Have Structural welding experience
• Fitting is a plus
• Mig, Stick, and Flux-Cored Welding
• ASME Code
• Fabrication experience is a must

Stand, bend, walk, squat, and non climate controlled environment for 10 hours a day

ResourceMFG is hiring Class A & B Fitter Welders in Catoosa!

Pay: $25-30 per hour

Shifts: (5) 12's, Mon-Fri; (3:00am - 3:30pm) (6) 10's, Mon-Fri; (5:00am - 3:30pm)

Must pass one of the following weld tests:

**Class A- will require a minimum of 6G(45 degree) on 6” pipe. This will be a Mig Downhill root / uphill fill and cap with fluxcore and another process. Example: Sub arc, Tig.

**Class B- Will be given a 3G(vertical) along with a 2G(horizontal) plate test. These tests will be Mig open root / uphill fill and cap with fluxcore in their respective positions. Class A & B fitter test will be administered for class A positions that will test the knowledge of blueprint reading/fitting. This test will also test the knowledge of formula usage and mathematical skills. 

Job Requirements:

• Steel toed boots
• Welding hood and PPE gear

We are hiring CNC Technician/Operators for a great company in Claremore!

Pay: $20-26/hour depending on experience

Hours: First shift 6am-3pm, Second shift 4p-1:30a

Job Description:

Machining Technician/CNC Operator is responsible for assembling machine components, as well as erecting, testing, teardown and shipping Pipe Machines and other equipment.

Sign on Bonus of $1500 and Great benefit package for associates who become permanent employees!  Apply Today!

Job Requirements:

• G-code test
• Steel toes

ResourceMFG is hiring Class A Assemblers for a GREAT company at the Port of Catoosa!

Pay: $18-20/ per hour

Class A Assembler Job Duties:

• Locate and set equipment, structural members, and assemble welded pipe spools with allowable tolerances.

• Check spools with drawings and determine the line is ready to install.

• Lift, position, and assemble components with in allowable tolerances.

• Check material for correct grade, type, and size prior to installation.

• Ensure piping is clean internally of foreign particles (grit, weld slag, etc.) prior to assemble.

• Fabricate and install temporary shipping braces as needed.

• Coordinate hydro testing with Assembly Department Lead or Supervisor and Quality Control to determine correct pressure and method of conducting test.  lean improvements.

Job Requirements:

• Steel-toed boots

ResourceMFG is hiring Electrical Assemblers for a great company in Catoosa!

Pay: $20-$26 per hour DOE 1st

Shift: 6:00am-6:00pm, Monday-Friday

Electrical Assembler Job Description:

As an equipment integrator and remanufacturer of equipment that typically uses 24VDC circuits, connecting diesel engines (up to 300-2500HP) to engine control modules, and field service equipment (including pressure transducers and temperature sensors) in order to control and provide feedback to operate the equipment. Back panel layouts made and wired, as well as operator consoles, field devices, batteries, and power distribution. 

Job Requirements:

Job Requirements:

• Familiar with wire sizes (Specifically 18 ga. wire with ferrules).
• Experience with crimping and installing terminal ends on wiring.
• Ability to read, work from, and potentially create electrical schematics.
• Capable of soldering.
• General understanding if 12 volt and 24 volts circuits.

As a ResourceMFG Electrical Assembler We Offer You:

• Competitive pay
• Paid weekly
• Access to health benefits and retirement plan
• FREE ONLINE skills training 

ResourceMFG is hiring Mechanical Hydraulics Assemblers for a great company in Catoosa!

Pay: 18-22 dollars per hour, DOE

1st Shift: 6:00am-4:30pm, Monday-Friday

Job Description:

• General Assembly w/ some basic welding Mig/Flux
• Strong Hydraulics skill applications
• Read and interpret blueprints, bills of material, and work instructions as necessary to perform each assigned task.
• Prep and assemble and/or finish components as needed.
• Perform all tasks per established quality and efficiency standards.
• Perform other duties as assigned.

Job Requirements:

Job Requirements:

• Hydraulics knowledge and experience
• Provide training and assistance to other employees as assigned.
• Follow action and communication protocols for nonstandard deviation in processes or materials. 

ResourceMFG is URGENTLY hiring Manufacturing Assemblers for an OUTSTANDING company in Broken Arrow!

Shift Hours: Friday, Saturday, Sunday 6am-6pm, work 36 and paid for 40 hours

PAY: $17.50/HOUR

ASSEMBLER JOB DUTIES

• Assembly of Plastics, Gasbreaker, Steel and thermoweld operations
• Maintain a clean and orderly work area
• Follow instructions from the lead person and supervisors.
• Set up and perform all general labor job functions.
• Operate various designated equipment in manufacturing and assembly areas.
• Know and follow all standard work used to finish any part. 

Job Requirements:

• One year experience in a manufacturing environment.
• Able to read and understand prints.
• Able to use precision measuring instruments

ResourceMFG is URGENTLY hiring Press Brake Operators for a great company in Tulsa. Several positions and two shifts available!

Pay: $19-$26/hour depending on skills/experience

Shifts:

Monday-Thursday 3:30pm-3:30am with extra overtime on Friday's 3:30pm-8:30pm.

Monday-Friday 5am-3:30pm with extra overtime on Saturday or Sunday 5am-10am.

Brake Press Operator Duties:

• Reading blueprints efficiently
• Experience with setting up and running CNC and manual press brake presses.

When hired as a full-time employee, the client offers these GREAT benefits:

• Medical insurance
• FSA
• 401K
• Paid vacation and PTO
• Quarterly bonuses!

Job Requirements:

• Able to Read Blueprints
• 2-years experience required
• Steel toed boots

ResourceMFG has DIRECT HIRE Material Handler positions available at the Port of Catoosa

First Shift: 6AM-4:30PM

Pay $18-20 per hour depending on experience

JOB DUTIES:

• The Material Handler is capable of performing a variety of material handling functions, including but not limited to operating a forklift, scissor lift, Jib crane, bridge crane, and other material handling devices
• Clearly communicate and interact professionally with truck drivers and other delivery personnel
• Daily inspections of equipment, including appropriate daily documentation 

Job Requirements:

• High school diploma or equivalent
• 6 months to 1 year experience as a material handler in a manufacturing environment
• Forklift, crane, and other lifting devices certifications 

ResourceMFG is hiring Assemblers at the Port of Catoosa!

First Shift: 6a-4:30pm

PAY: $18-20 depending on experience

JOB DUTIES:

• The Final Assembler builds air/heat exchanger,  completes the assembly of the cooler, ensuring that it is customer ready.
• Hand assembly of cooler components
• Uses hand and power tools to assembly components and the final completed cooler
• Studies blueprints, work orders, or schematics to plan and carry out tasks
• Test and disassembles assemblies for shipment 

Job Requirements:

• High school diploma or equivalent
• 6 months to 1 year experience in assembly in a manufacturing environment 
• Aptitude of mechanics

ResourceMFG is hiring Tube Rollers for a GREAT company at the Port of Catoosa!

PAY: $19-22 per hour depending on experience

JOB DUTIES:

• The Tube Roller rolls tubes, stabs tubes, assembles tubes, and conducts hydrostatic testing
• Read and interpret blueprints to determine tube specifications
• Rolls and stabs tubes into section
• Assembles tube and section components
• Operates manlifts and cranes 

Job Requirements:

• Operates manlifts and cranes
• High school diploma or equivalent
• 6 months to 1 year experience in manufacturing, Heat Exchanger industry preferred

We are hiring experienced CNC Machinists in East Tulsa and Claremore- Hiring immediately!  First and Second shifts available!

Hours: 6:30am-4pm, Mon-Thurs, and Overtime on Fridays/ 2nd shift available as well in Claremore!

Pay: $20-$25 per hour depending on experience

JOB Duties:

Edits, setups, programming, able to read blueprints, various CNC machines, using measuring gauges and calipers. 

Job Requirements:

• Able to read blueprints
• 2 years+ CNC experience preferred
• Steel toed boots

ResourceMFG is hiring welders for a great company in Claremore! 

Shifts: First, second and some weekend shifts available

Pay: $18-27/hour based on experience and weld tests

Job Duties: 

Using fluxcore and metalcore processes, welding steel product for a variety of industrial projects. 

Weld test: 

Fluxcore weld test in 3G vertical uphill and gas metal arc in 1G flat position. 

Job Requirements:

• Steel toed boots
• Welding hood and gear

ResourceMF is hiring Class A Material Handlers for a GREAT company at the Port of Catoosa!

Pay: $18 and up depending on experience 

Shift: Hours 5:45a-3:30pm Monday-Friday

Material Handler Job Duties:

• Load and unload trucks.
• Stock and issue materials, accept/reject material based upon P.O., Specifications & other requirements
• Update material movements and location changes by using the Tracking system.
• Count, handle and store all parts and materials in proper location.

Job Requirements:

• Steel toed boots
• At least ONE year in a manufacturing material handling role

Resource is hiring Mig welders for a company in the Port of Catoosa!

Pay: $22 and up based on experience.

Shift:  Monday-Thursday 6am-3:30pm

WELDER REQUIREMENTS

• Welder must be able to pass a 3G MIG/FCAW weld test.
• Must have a minimum of 2 years of experience welding structural steel and plate.

Job Requirements:

• Steel toed boots
• Welding gear and hood

ResourceMFG is hiring a Utility Screw Pipe Assembler at the Port of Catoosa!

PAY: $20-25 based on experience 

SHIFT:  Hours 6am-3:30pm- Monday thru Thursday

Job Duties as a Utility Pipe Screw Assembler: 

• Able to cut and thread 1/2” to 3” schedule 80 thru schedule 160 pipe.
• Have experience bending tubing 1” to 2”.
• Able to read blueprints

Job Requirements:

• Minimum of 2 years of experience
• Own required tools
• Steel toed boots