Northridge, California

Select Staffing has a great opportunity for Cleanroom production worker within a manufacturing company in Chatsworth, CA.

Pay: $18.00

Hours:

1st or 2nd shift hours available

Monday to Thursday

Temp to hire opportunity

Summary:

Manual placement of components in a clean-room environment, to manufacture high-reliability microelectronic devices.

Essential Duties and Responsibilities:

• Read and interpret assembly instructions, drawings and work instruction processes.
• Written tests for ESD + Manual Die attach and Sub Attach requirements.
• Use tools such as fine tipped tweezers, x-acto knives, vacuum pencils, dental probes, calipers, scales.
• Handle fine pitched micro electronics components such as dies, air-bridge dies, capacitors, resistors, substrates, hybrids.  .
• Hand apply epoxy and solder on densly populated substrate pads without disturbing epoxy on neighboring pads.
• Attach loaded /unloaded substrates into case using performs and hot plate.
• Use hot plates and other tools to remove dies and other components from the substrate for the purpose of rework.
• Perform rework- removing epoxy, die and other components from the substrate and applying fresh epoxy and installing new components using the above mentioned tools, hot plate etc.

Job Requirements:

• Perform general physical activities.
• 0-1 year working experience as a manual die attach/sub-attach operator in a microelectronic assembly factory.
• Familiar with MIL-PRF-38534 requirements for microelectronics’ assembly.
• Ability to work in a class 100,000 (class 8) clean room environment using clean room antistatic gowns, facemasks, hair covers etc.  
• Ability to work with a 30X microscope throughout the day.
• Ability to access documents using a computer
• Should not have a problem in using chemical based cleaning systems for cleaning build substrates etc.
• Mechanical aptitude/dexterity and the ability to lift up to 20 lbs
• Fluency in English Language- Reading, written & spoken

Education/Experience:

• High School Diploma /GED or equivalent experience

Are you looking to make some money on the side?! Refer a Friend and earn a 100 bonus!!

Benefits: 

1. Full Medical Insurance.
2. Dental and Vision Insurance.
3. Full time work.
4. 3 Sick Days
5. $100 Referral bonus

Resource MFG has a Press Brake Operation in Simi Valley, CA within a metal storage manufacturer!
Pay: $20 - $25 / hr or DOE
Hours: 3rd Shift: 9:00pm - 5:30am
Schedule: M – F possible weekends; Overtime is Mandatory
Performance to hire opportunity
Company is willing to train!
Location: Simi Valley CA

Essential Functions:
• Sets up and performs BRAKE operations. Brake Machinery to specifications of work orders and fabrication prints/drawings without supervision.

• Must be able to read and interpret mechanical drawings or fabrication prints as needed for accurate and safe brake operation.

• Must understand and calculate bend deduction allowances as required to set up 

• Applicant must be able to follows work order directions and safely produces required quantity of parts efficiently and within the required tolerance and cosmetic quality.

• Must performs light level daily maintenance on assigned brake press equipment.

Job Requirements:

Benefits offered:
• 2 medical plans options
• Referral Bonus
• Free online education courses
• Career advancement opportunities
• Great company culture, opportunity to be a part of a great team!
•

Requirements
• Must be able to read and interpret blueprints or mechanical drawings involving brake operations.
• Must possess sufficient visual acuity (correctable) to read instructions, safely operate machines, and visually inspect parts produced.
• Must know how to safely set up and run Amada RG, Amada FAB, TRUMPF Tr

ResourceMFG has a great opportunity for a Test Technician within a electronics manufacture in Chatsworth, CA

Pay: $25.00

Hours: 3PM – 12AM

Monday to Friday

Temp to Hire opportunity

MAIN JOB DUTIES/RESPONSIBILITIES:

• Adhere to all ESD requirements and Board Handling procedures.
• Use of Moisture Sensitive Device (MSD) handling requirements based on component moisture sensitive levels (MSL).
• Identify faulted components or manufacturing defects on production printed circuit boards (down to the component level) and submit for re-work.
• Read, interpret, and react to schematics for the troubleshooting process.
• Test production printed circuit boards to include but not limited to functional and boundary scan tests.
• Must have RF experience.
• Run software backups, diagnostics and preventive maintenance on tester control computers; identify signs of viruses or excessive fragmenting and clean them when needed.
• Support the production test operator training and certification program.
• Support test engineering development projects as required.
• Participate in test process and test station improvements, efficiencies, and safety.
• Create test reports that accurately describe test results and any other findings observed during test and/or troubleshooting processes.
• Interface with other cross-functional departments, and possibly customers.
• Utilize, enter data, and to track yield/troubleshooting details with Clarity application for tested and debugged assemblies for all products.
• Comply with company standards and ISO procedures and standards related to company’s various Quality Management Systems.  These systems may include, but are not limited to, quality, the environment, health, safety and security.
• Train production test debug technicians as requested.
• Support all corporate and site 6S objectives.
• Perform all other duties as assigned, may be required to work overtime, and occasional Saturdays.

Job Requirements:

Qualifications

Experience/Education:

• AA/AS Degree in Electronic Technology or equivalent work experience.
• Ability to work on single task / procedures / products.
• Highly repetitive or routine duties,
• Ability to support 1-2 product lines / customer(s)
• Normally receives detailed instructions on work
• Works under close supervision
• No prior work experience required
• Experience operating test equipment not limited to HP 3070 and Genrad (Network and Spectrum Analyzers, oscilloscopes).
• Able to troubleshoot electronic circuits down to the component level.
• Prefer experience with amplifiers and attenuators.

Are you looking to make some money on the side?! Refer a Friend and earn a 100 bonus!!

Benefits: 

1. Full Medical Insurance.
2. Dental and Vision Insurance.
3. Full time work.
4. 3 Sick Days
5. $100 Referral bonus

• 1+ years of mechanical assembly experience with large parts
• Able to work in a fast-paced work environment.
• Attendance and punctuality are very important
• Pre-employment screenings

Are you looking to make some money on the side?! Refer a Friend and earn a 100 bonus!!

Benefits: 

1. Full Medical Insurance.
2. Dental and Vision Insurance.
3. Full time work.
4. 3 Sick Days
5. $100 Referral bonus

IMMEDIATE MANUFACTURING OPENING!
General Assembler
Multi Shifts

Don’t Miss Out on This Assembly Worker Job!

Stop the endless search for "manufacturing jobs near me." Secure a solid manufacturing job! ResourceMFG is hiring skilled Assemblers right now. Don't miss the opportunity to work at an excellent manufacturing facility. We provide good pay, benefits, and FREE online training to help you learn new skills and advance in your career.

.

Here’s your opportunity to work for a company that offers FREE online training that has helped 98% of participants perform better in their jobs! Apply Today!

“My primary reason for giving ResourceMFG a 10 it\'s just the way they take care of their employees.” ResourceMFG Associate, Patshiely

We Require Our Customers to Offer:

• Safe and clean work environment
• Employee focused workplace
• Safety programs and training

As a ResourceMFG Assembler We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

Job Requirements

• Minimum 3 months relevant Assembly experience
• Attention to detail
• Able to use basic hand and power tools
• Basic Math
• Mechanical aptitude
• Able to read blueprints/drawings
• Hand eye coordination and dexterity
• Basic computer skills

Job Responsibilities

• Follow safety guidelines
• Follow standard work instructions as assigned
• Perform hands-on tasks
• Lift up to 50lbs, stand, bend, and reach
• Maintain clean and organized workspace
• Troubleshoot issues
• Meet production standards
• Work in a team environment
• Accurate recordkeeping and inventory documentation
• Inspection of product
• Experience with electronic assembly, a plus

Working for ResourceMFG
If you’re looking for a job in manufacturing, ResourceMFG specializes in you! We are America’s largest staffing company with over 30 years in business, putting more than 24,000 people to work nationwide, each week. A company that treats you like family, we’re committed to providing equal opportunities to all, a healthy and safe work environment, fair pay and the tools to succeed and grow.

Job Requirements:

• 1+ years of mechanical assembly experience with large parts
• Able to work in a fast-paced work environment.
• Attendance and punctuality are very important
• Pre-employment screenings

Are you looking to make some money on the side?! Refer a Friend and earn a 100 bonus!!

Benefits: 

1. Full Medical Insurance.
2. Dental and Vision Insurance.
3. Full time work.
4. 3 Sick Days
5. $100 Referral bonus

Manufacturing Company is looking for a Tool Crib Attendant! 

City: Chatsworth, CA

Full Time Position! 

Shift:  Training on 1st Shift, Move to 2nd Shift (permanent)

Rate: $18.00 per hour 

Job Description: 

Tool crib attendants track the supply and use of equipment in the tool crib at a construction site. When construction workers need tools to complete their tasks, the tool crib attendant gives out the tools and tracks them to make sure they are returned at the end of the day. In this role, your job duties include keeping an accurate inventory of the tools and storing them properly. You also inspect the equipment to make sure they are in good condition and report those that are worn, damaged, lost, or unsafe to use. Depending on the company, you may also be responsible for ordering replacement tools to replenish the supply in the tool crib or repair tools that are only slightly damaged.

Job Requirements:

Requirements: 

Ability to lift 40 lbs,

Grade Level Math 

We are looking for a Deburr Specialist to work in an Aerospace Manufacturer 

Hours: 2:30pm - 11pm

Pay Rate: $19 - $22

The Deburr Specialist/ Part Finisher is responsible for ensuring that the material/parts are completed to blueprint and meet all quality standards. 

RESPONSIBILITIES

• Performs finishing duties in accordance with drawings, travelers and manufacturing procedures.

• Deburrs and hand finishes parts per required specifications by using established procedures, machines, and tooling.

• Operates drills, vertical/horizontal cut off saw, basic deburr and hand finish tools.

• Distributes maintenance supplies in the facility.

• Prepares the Machine Shop Schedule for Planner.

• Confirms the status of closed/open assignments.

• Performs other duties as assigned.

Job Requirements:

Requirements:

• 2 - 5 years of metal hand finishing or deburring experience

• Completion of technical school a plus

• Must be able to read and interpret blueprints and instructions.

• Able to lift 50 lbs

• Good hand and eye dexterity

• Good communication skills

• Able to work in a fast-paced team environment.

Are you looking to make some money on the side?! Refer a Friend and earn a 100 bonus!!

Benefits: 

1. Full Medical Insurance.
2. Dental and Vision Insurance.
3. Full time work.
4. 3 Sick Days
5. $100 Referral bonus

Searching for a Calibration Technician in Chatsworth! 

Pay Rate: $20-$25/ hour (based on experience)

PRIMARY RESPONSIBILITIES

• Performs final screening and pre-calibration duties per the product specifications

• Utilizes standard test equipment such as oscilloscopes, voltmeters, and frequency generators

• Performs error free production testing in an assigned area with limited cross-functional interface

• Measures and records data per work instruction requirements

• Measures and creates calibration certificates on a day to day basis

• Provides daily support to meet the production demand

• Maintains a clean and safe work environment

• Assists other Calibration Technicians and other departments, on an as needed basis

• Performs administrative functions such as sorting, filing, etc. 

Job Requirements:

KNOWLEDGE AND SKILL REQUIREMENTS

• 2 year degree in electronics from a technical/ vocational school; or any combination of education and experience

• Ability to read and interpret schematics

• Knowledge of AS9100 and ISO 17025 a plus

• Familiar with standard test equipment such as oscilloscope's, voltmeters and frequency generators

• Accurate and organized with high attention to detail

• Good communication, reading, writing and math skills

• Knowledge of electronic principals

• Be a local candidate

Are you looking to make some money on the side?! Refer a Friend and earn a 100 bonus!!

Benefits: 

1. Full Medical Insurance.
2. Dental and Vision Insurance.
3. Full time work.
4. 3 Sick Days
5. $100 Referral bonus

looking for a Test technician for sensors in the Aerospace Industry

M-F pay $19-21 DOE

As a Test Technician you PRIMARY RESPONSIBILITIES are:

• Performs pre-calibration and calibration duties per the product specifications

• Utilizes specialized pre-calibration software

• All work reviewed and certified by minimum Calibration Technician III or Higher

• Performs error free production testing in an assigned area with limited cross functional interface

• Measures and records data per work instruction requirements and document nonconformance

• Provides daily support to meet the production demand

• Maintains a clean and safe work environment

• Assists other Calibration Technicians and other departments, on an as needed basis KNOWLEDGE AND SKILL 

Job Requirements:

REQUIREMENTS

• High school diploma or equivalent

• Must be accurate and organized with high attention to detail

• Good communication, reading, writing, and math skills

• Knowledge of electronic principals

Are you looking to make some money on the side?! Refer a Friend and earn a 100 bonus!!

Benefits: 

1. Full Medical Insurance.
2. Dental and Vision Insurance.
3. Full time work.
4. 3 Sick Days
5. $100 Referral bonus

Looking for experienced Solderers in Chatsworth Ca

M-F occasional Saturday 6am-230pm $19-$21/hr

• Must have experience working with a microscope to solder small components for 8 hours a day maximum

• 2 years of experience

• Must be able to follow written and verbal instructions

• Must be able to understand assembly drawings, schematics and work instructions

Job Requirements:

• IPC-610 or J-STD Certified

• Must be able to operate standard manufacturing equipment:

o Soldering irons o Spot welders o Tweezers o Microscopes o Ovens

Resource MFG has some great opportunity for mechanical assemblers for a aerospace company in Chatsworth

Room to grow, will train! 

Pay: $17.25 - $17.75

Weekly Pay 

Benefits: Health, Sick, Dental and much more! 

Hours: 3:15 PM – 12:00 AM Monday to Friday

 • Performs any assembly type functions, using hand tools, mechanical equipment and/or measuring equipment

• Reads, references and interprets written and verbal instructions; always following established standard procedures

• Maintains established production levels and quality standards

• Visually or through the use of a microscope, inspect various conditions of unassembled/assembled bearings

• Recognize and report any irregularities as to fits, defective parts, finishes, work techniques and/or quality of workmanship

• Maintains necessary records; work is subject to audited inspections

• Handle parts according to established procedure

*** Apply NOW*** 

Job Requirements:

Ability to read and understand complex written and verbal instructions in English Good manual and concentrated visual attention dexterity skills Abilities:

Able to be flexible and respond to the changing needs of the organization Ability to wear clean room uniform including mask; excess jewelry not permitted, limited make up permitted Other Requirements: 

6 month - 1 year  component assembly or related experience 

Are you looking to make some money on the side?! Refer a Friend and earn a 100 bonus!!

Benefits: 

1. Full Medical Insurance.
2. Dental and Vision Insurance.
3. Full time work.
4. 3 Sick Days
5. $100 Referral bonus

ResourceMFG has an exciting opportunity for a Soldering/Assembler within a aerospace defense company.

Pay: $23.00 - $28.00 DOE
Hours: 6am- 4pm
Schedule: 9/80 Schedule

Job Purpose:
• Assemble electronic components to support engineering research activity and product delivery.
Responsibilities:
• Perform MIL SPEC lead/silver solder assembly and rework with surface mount and through hole PCB's.
• Perform box level assembly.
• Complete assembly & test tasks from specifications, instructions, diagrams, and wire lists.
• Assembles wiring and cables by selecting and cutting wires; soldering and connecting to electronics enclosures.
• Secures nuts, wires and cable by applying liquid adhesives.
• Secure components by applying epoxy.
• Attaches cable to components or plugs by soldering or crimping wires and connectors.
• Verifies continuity by testing cable using DVM or simple test equipment and fixtures.
• Assists in maintaining records and documents of assembly procedures and design changes.

Job Requirements:

Skills/Qualifications:
• Certifications in J-STD-001 and IPC
• Have prior assembly experience or current position in electronics assembly role in aerospace or defense environment.
• Have current ability to read, write and speak English.
• Have MIL SPEC lead/silver solder assembly and rework experience with surface mount and through hole PCB's.
• Ability to read schematics to complete assembly tasks.
• Ability to use hand tools such as wire cutters & strippers, crimpers, heat gun, screwdrivers, wrenches, tweezers, magnifying glasses
and exacto knife razors to complete assembly tasks.
• Familiarity with digital volt meter to test wiring continuity and component capacitance and resistance values
• A hands-on, "get it done" attitude
• Strong communication skills
• Ability to work collaboratively with co-workers

REsourceMFG has a great opportunity for a Machine Operators within a Manufacturing company.

Pay: $18

Hours: 2:30PM - 11PM

Training (4) months in morning 6AM - 2:30PM

Monday to Friday

Reads, references and interprets written and verbal instructions; always following established standard procedures and certified processes.

Assist with training of operators and set-up personnel, as required.

Maintains established production levels and quality standards.

Recognize and report any irregularities as to defective parts, finishes, work techniques and/or quality of workmanship.

Maintain all necessary documentation in a clear and accurate manner, including paperwork and job reporting transactions as required.

Maintains necessary records; work is subject to audited inspections.

Handle parts according to established procedures.

Follow all prescribed safety rules and regulations.

Keeps work area clean and orderly including promptly reporting to Team Lead any oil/coolant leaks and/or spills

Performs related duties as assigned by leadership.

ResourceMFG has a great opportunity for a CNC Machine Operator within a machine shop environment for the aerospace industry located in Chatsworth, CA

Pay: $18 .00- $20.00+ DOE

Hours: 2nd or 3rd shift

train in the morning for (4) months 6AM - 2:30PM

Sunday to Thursday (3rd shift + 15% shift differential) 

Overtime and weekends availability required

Training will be done in the morning

Temp to hire opportunity

$1,000 Sign On Bonus (ask for details)

Duties and Responsibilities:

• Operate all CNC turning machines within a Primary subgroup to produce a variety of standard and non-standard parts to close tolerances and exacting finish specifications.
• Refer to Shop Order and Engineering Drawings for dimensions, tolerances, finishes and number of parts to be machined.
• Follow established procedures, verbal instructions, and information obtained from set-up sheets and layout sheets to operate machines.
• Use micrometers, venires, optical comparator, microscope, and a variety of fixed and adjustable gauges to check work.
• Produce parts for First Article inspection and check parts periodically; make adjustments to correct variances and maintain required tolerances and quality.
• Diagnose and correct operating difficulties.
• Work subject to process inspection; screen parts for established defect characteristics.
• Maintain necessary records. Detect and report unusual conditions and special problems to proper supervisor.
• Move materials, parts, and containers, as required, in performance of duties or as directed.
• Follow prescribed safety rules and regulations and conform to OSHA regulations. Keep work area in clean orderly condition.

NOTES:

(1) Assigned work areas may change as production requirements warrant.

(2) CNC operators are responsible for producing quality parts; i.e. within specification.

Non-conformance to specifications must be brought to the attention of the Team Leader or

Occupational Summary:

Performs turning machine operations on components to specified dimensions according to required quality standards by performing the following duties:

Requirements:

Education:

High School diploma or equivalent

Experience:

Machine shop, CNC, tuning or related experience is a plus

Job Skills:

Must be able to run all machines in a Primary subgroup (see below) independently including holding tolerances, and making necessary adjustments; with proficiency.

Primary Subgroups:

BL12

Retainers

Wasino

Specials

Mori Seiki

Abilities:

• Ability to read and understand complex written and verbal instructions in English
• Ability to perform basic mathematical calculations (addition, subtraction) and maintain an understanding of the decimal and metric systems
• Able to be flexible and respond to the changing needs of the organization

ResourceMFG has a great opportunity for a Assembly Technician within a aerospace company in Chatsworth, CA.

Pay: $18 - $20 hr DOE

Hours: 6AM – 2:30PM

Monday to Friday

Temp to hire Opportunity

As an Aerospace Assembly Technician, you will perform a variety of tasks ranging from repetitive to non-repetitive production assembly operations. You will work from diagrams and drawings, make initial layouts, and use hand and/or power tools. You will make continuity checks on work in process and completed. You may conduct quality inspections on processing line in accordance with quality specifications. Additionally, Assembly Technicians will disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

What you’ll be doing as an Assembly Tech I:

• Using hand and power tools, assemble a variety of parts, sub-assemblies, or complete units to specified tolerances.
• Inserting Heli coils.
• Inserting bushings, bearings, and pins using Arbor press
• Touch up paint, apply epoxy coatings and sealants.
• Marking parts with engravers, vibro-peen, chem-etch, or laser.
• Production testing using hydraulic and other test methods.
• Follow written instructions, drawings, and blueprints.
• Maintain a clean, organized work area to facilitate manufacturing functions.
• Perform all work in accordance with established standards and safety procedures.
• Ensure proper documentation is entered on manufacturing planning (including correct quantities) and paperless timecard system.
• Completes all daily record keeping, part count and part traceability with consistent accuracy.
• Adheres to all workplace safety guidelines, policies, and laws determined by the company, state, and federal authorities.
• Performs other duties as assigned.

Job Requirements:

Minimum Requirements:

• Available to work a full-time position with pre-determined shift times. 
• Comfortable working a temp-to-hire position. 
• Team player with a can-do attitude. 
• Mechanically inclined, with good manual dexterity.
• Communicates well verbally and in writing.
• Strong skills and aptitude in shop mathematics.
• Excellent attention to detail.

Physical Demands: 

The physical demands and work environment characteristics described here are representative of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Are you looking to make some money on the side?! Refer a Friend and earn a 100 bonus!!

Benefits: 

1. Full Medical Insurance.
2. Dental and Vision Insurance.
3. Full time work.
4. 3 Sick Days
5. $100 Referral bonus

ResourceMFG has a great opportunity for a Production Control Coordinator within a aerospace company in Simi Valley, CA.

Pay is $28-32/hr. 7am – 5:30pm.  Monday – Friday

Temp to hire opportunity

Production Control Coordinator

How You’ll Make an Impact 

As a Production Control Coordinator you will have the responsibility of planning, scheduling, tracking and expediting product through the Order Fulfillment cycle.  The Production Control Coordinator’s responsibility begins with the receipt of the customer purchase order or contract, through the manufacturing cycle, shipment, and/or stock.  This position is responsible for establishing and maintaining inventory levels in support of company policy and objectives.  This position reports to the Manufacturing Manager.  

What you’ll be doing as a Production Control Coordinator:

• Contract Review
• Reviews and validates delivery dates; identifies options, informs management and takes appropriate action if delivery dates cannot be achieved.
• Reviews and prepares planning; gains approval for planning as required.
• Pulls approved planning template to job; releases jobs per schedule requirements.
• Production Scheduling
• Creates and manages production schedules.
• Reviews dispatch reports on a periodic basis; identifies options, reports concerns to management and takes appropriate action.
• Backlog Management
• Prepares rolling 3-month shipment analysis and reports to management monthly, or as requested by management.
• Tracks daily, weekly and monthly shipping performance against the rolling 3-month plan; makes recommendations, reports concerns to management and takes appropriate action.
• Outside Processing Management
• Monitors OSP deliveries and receipts in support of production schedules.
• Obtains quotes for price and delivery.
• Inventory Management
• Sets minimum and maximum inventory levels in support of company policy and objectives.
• Calculates EOQ’s and establishes job lot sizes accordingly.
• Purchases materials to support EOQ, schedule and inventory level objectives.
• Obtains quotes for price and delivery for raw materials and hardware.
• Monitors Manufacturing Schedule Performance.  Tracks late job operations; identifies options, reports to management and takes appropriate action.
• Reviews machine loading on a periodic basis.  Identifies opportunities and concerns, reports to management and takes appropriate action.

Job Requirements:

Minimum Requirements:

• Working knowledge of MRP systems and related processes.
• Technical understanding and ability to read industry blueprints and specifications.
• General knowledge of machining concepts and methods.
• Working knowledge of Microsoft Word and PowerPoint.
• B.S. in business or engineering or equivalent combination of work experience, education and certification.

Preferred Requirements: 

• Advanced skills in Microsoft Excel.

Minimum 3 years related industry experience

ResourceMFG has some great opportunities for electronics assemblers within a manufacture in Chatsworth, CA.
Pay: $17.50
Hours:
1st shift: 7:30am – 4pm ($17.50)

Monday to Friday
Temp to hire Opportunity

Summary: Assembly of airborne communication and navigation antennas. Primary work is conducted while standing utilizing hand tools (powered and manual), machinery or applicable materials.

Essential Duties and Responsibilities:
• Read, interpret and follow basic blueprints, diagrams, engineering drawings to accurately assemble equipment and products
• Utilize hand held tools such as a hand held screw and drill gun
• Maintain inventory of product in work stations
• Perform quality work checks to ensure the product meets quality standards
• Identify product defects and complete appropriate documentation when defects are identified
• Identify hardware, wire assemblies and plastic components.
• Work with miniature to large components
• Integrate electronic assemblies and cables into mechanical housings.
• Use various hand tools (pliers, rulers, cutters and pneumatic tools such as torque drivers, torque wrenches and screwdrivers).
• Perform all other duties, as assigned.
Job Knowledge, Skills & Abilities:
• Fluent in English
• Able to work over time when needed
• Ability to utilize electronic manufacturing system