Longmont, Colorado

Receiving Associate Needed for Temp to Hire Job Opportunity in Longmont!

1st Shift

$17-19 Depending on experience 

Receiving Associate Duties and Responsibilities:

- Unload and unpack incoming shipments.

- Process material through Receiving by opening boxes, counting material, and all other requirements of receiving materials.

- Print packing slips; track serial numbers applicable to daily shipments.

- Examine articles for defects and sort articles according to extent of defect; may record factors causing goods to be returned. - Interface with PM and Buyer.

- Enter daily receiving transactions into Profit key, as required.

- Support and follow all ISO standards related to the Company's various Quality Management Systems. These systems may include, but are not limited to, quality, the environment, health, safety and security.

Job Requirements:

Receiving Associate, KNOWLEDGE, SKILLS, AND ABILITY 

• Completion of High School education or equivalent
• 1-2 years of experience working in a manufacturing receiving capacity
• Aptitude for mechanical operation
• Adhere to all safety procedures
• Superb attention to detail and product quality
• Excellent attendance and punctuality - accurately record work time on a daily basis

Receiving Associate PHYSICAL REQUIREMENTS

• Duties require frequent standing throughout working shift for 8 to 12 hours
• Ability to read and interpret order sheets and other documents
• Able to lift 10 lbs. continuously and occasionally lift and/or move up to 75 lbs.
• Occasional climbing, stooping, bending and overhead reaching
• Frequent walking
• Fine hand manipulation, grasping and gripping

Due to ITAR and / or CUI compliance, this position requires candidates to be a U.S. Citizen, Permanent Resident

This position includes the opportunity to enroll in Medical, Dental, Vision, Term Life, and Short-Term Disability benefits, as well as a Retirement Plan.  All Colorado Associates are also entitled to accrue, and use paid sick and safe leave.

#rmfgindeed

Manufacturing Stockroom Associate needed in Longmont

1st shift Available 

Pay $17.00-20 depending on level of experience 

Manufacturing Stockroom Associates Accurately transact and physically move raw materials to and from the Stockroom. Maintain an accurate accounting of inventory within the Stockroom. Locate stock and deliver items to their destination based upon customer needs. Complete component preparation prior to kit release.

Manufacturing Stockroom Associate Duties and Responsibilities:

-Use of Moisture Sensitive Device (MSD) handling requirements based on component moisture sensitive levels (MSL). PREVIOUS EXPERIENCE NEEDED

-Utilize process sheets to ensure correct build or proper revision of product.

-Verify correct part numbers in kit supplied to the SMT program or load list and kit sheet.

-Read and interpret work instructions.

-Use a digital volt multi-meter (DVM) to read component values and document values on SMT load sheets.

-Load and unload feeders for surface mount machines using the load list provided by machine.

-Use a reel counter for counting of SMD on reels for teardown count back processes to the stockroom.

-Use a computer program to create inventory labels.

-Support work cells by pulling kits and filling kit shortages and floor shortages.

-Fill material requisitions, work orders or requests for materials, tools or other stock items and distribute items to production workers or assembly line.

Other Duties As Assigned

Job Requirements:

Manufacturing Stockroom Associate Requirements:

• Ability to utilize electronic manufacturing system (OCuity).
• Knowledge of IPC-DVD-64C Component Identification.
• Pass IPC-A-610 Modules 1 & 2.
• Ability to read kit sheets, cycle count sheets & transaction reports.
• Ability to read and interpret assembly instructions, drawings and work instruction processes.
• High school diploma or Equivalent REQURED

Due to ITAR and / or CUI compliance, this position requires candidates to be a U.S. Citizen, Permanent Resident

This position includes the opportunity to enroll in Medical, Dental, Vision, Term Life, and Short-Term Disability benefits, as well as a Retirement Plan.  All Colorado Associates are also entitled to accrue, and use paid sick and safe leave.

#rmfgindeed

Fine Pitch Solderers Needed in Longmont!

1st and 2nd Shift opportunities Available!

Pay $18-29 Depending on level of experience

Perform a variety of assembly operations on electronic components and subassemblies on the production line utilizing work process procedures, written instructions, diagrams, and specifications. Primary work is conducted under a lighted magnified lens, utilizing small hand tools, machinery or applicable materials, while soldering components and assembling to printed circuit boards utilizing a soldering iron.

Solderer Duties and Responsibilities:

• Primary component type soldering of thru-hole devices only.

• Melt and apply solder along adjoining edges of work pieces to solder joints using a soldering iron.

• Clean/polish work pieces and tip of soldering iron using chemical solution, file, or wire brush.

• Apply flux to work piece surfaces in preparation for soldering.

• Heat soldering iron or work piece to specified temperature for soldering, using electric current.

• Examine product to verify conformance to workmanship standards.

• Support and follow all ISO standards related to the company's various Quality Management Systems. These systems may include, but are not limited to, quality, the environment, health, safety and security.

Job Requirements:

Solderer Skills & Abilities:

• Ability to utilize electronic manufacturing system.

• Perform general physical activities.

• Monitor processes, materials and surroundings.

• Spend time making repetitive motions.

• Wear common protective and/or safety equipment.

• Manual dexterity.

• Knowledge of IPC-DVD-64C Component Identification.

High school diploma or Equivalent REQURED

Due to ITAR and / or CUI compliance, this position requires candidates to be a U.S. Citizen, Permanent Resident

This position includes the opportunity to enroll in Medical, Dental, Vision, Term Life, and Short-Term Disability benefits, as well as a Retirement Plan.  All Colorado Associates are also entitled to accrue, and use paid sick and safe leave.

#rmfgindeed

ATTENTION Experienced Machine Operator
Now Hiring - Multi Shifts

Competitive Pay. Good Benefits. Safe Workplace.

If reliable weekly pay, a reputable company and a safe environment are important to you, this is a great opportunity. Join the fast-growing manufacturing industry. As an experienced machine operator, you’ll work at a top facility where hard work is valued, and there is room for growth!

Isn’t it time you worked for a company that wants to see you get ahead! FREE skills training for associates who complete 80 hrs. of work. APPLY TODAY!

"They helped me find work right away. And they're awesome to work with." ResourceMFG Associate, Cathie

We Require Our Customers to Offer:

• Safe and clean work environment
• Employee focused workplace
• Safety programs and training

As a ResourceMFG Machine Operator We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan

Job Requirements

• Minimum 12 months relevant Machine Operator experience
• Able to use basic hand and power tools
• Basic math
• Mechanical and electrical aptitude
• Ability to identify problems
• Able to multi-task
• Attention to detail
• Able to read ruler/tape measure
• Basic computer skills

Job Responsibilities

• Follow safety guidelines
• Follow standard work instructions as assigned
• Perform hands-on tasks
• Lift up to 50lbs, stand, bend, and reach
• Maintain clean and organized workspace
• Troubleshoot equipment issues
• Experience with CNC, a plus
• Routine maintenance checks
• Ensure product meets customer specifications
• Meet production standards
• Work in a team environment
• Accurate recordkeeping and quality documentation
• Inspection of product
• Set up and operation of machinery

Working for ResourceMFG

If you’re looking for a job in manufacturing, ResourceMFG specializes in you! We are America’s largest staffing company with over 30 years in business, putting more than 24,000 people to work nationwide, each week. A company that treats you like family, we’re committed to providing equal opportunities to all, a healthy and safe work environment, fair pay and the tools to succeed and grow.

Seeking an experienced Warehouse/Forklift associate that also likes to work production 

Monday-Thursday 7am-430pm, and Friday 7am-230pm (2 OT hours each week)

Pay $18-21 DOE

We are looking for people that have some forklift, Material handling experience. Good math skills would be a plus.

Shop Helper/Warehouse/Forklift Associate Primary responsibilities

• Maintain up to date forklift certification.

• Drive a forklift in a safe manner.

• Inspect forklift daily and document inspections.

• Ability to accurately select and load material properly to meet customer and production requirements.

• Ability to communicate effectively.

• Ability to read and understand material tags and work orders.

• Ability to read tape measures.

• Understand wood spec with training.

• Learn and understand basic shipping and receiving practices with training.

• Assist in the manufacturing Facility during down time

Job Requirements:

Shop Helper/Warehouse/Forklift  Associate Job Requirements:

• High school diploma or GED equivalent
• Previous experience in manufacturing or shop work, including metal or wood shop classes
• Aptitude for mechanics
• Familiarity with hand tools
• Physically capable of standing for extended periods of time and lifting to 50 pounds
• Forklift Experience

Apply today for immediate consideration or text us for more info at 303-772-7202!

This position includes the opportunity to enroll in Medical, Dental, Vision, Term Life, and Short-Term Disability benefits, as well as a Retirement Plan. All Colorado Associates are also entitled to accrue and use paid sick and safe leave.

ResourceMFG is seeking a Machine Operator to join our team in Fort Lupton, Co. 

Shift: 5:30am-5:00pm M-F & 5:30am-12pm on Saturday Pay: $20

The Machine Operator will be working in an environment in which they will be making blocks. As part of our team, you would be operating production line machines, inspecting products, and learning the valuable skill of maintaining equipment. Automation with robots is part of our manufacturing process. Our ideal person for the Machine Operator position would have a strong work ethic with a great attention to quality and safety.

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Learn and know names of block product to include sizes and color details

• Learn and understand cubing patterns and block per pallet quantities

• Learn and understand the controls and proper operation of the cuber, splitter and de-palleter

• Operate the cuber, splitter and de-palleter in a safe manner and report any problems with equipment to Supervisor or Machine Operator immediately

• During machine downtime, this position is to assist the Machine Operator with problems as needed

• During mold changes, this position is to assist the Machine Operator with such actions

• During machine downtime, ensure your area is clean and the Machine Operator does not need your assistance, then communicate with the Shift Lead to verify what additional duties are needed

• Must be able to read and use a tape measure

• Must be able to stack and flip block

• Inspect block product for good/bad quality

• Keep area clean and organized for duration of the shift • Follow mixer cleaning lockout procedures

If this sounds like you, Apply now! We want to meet you.

This position includes the opportunity to enroll in Medical, Dental, Vision, Term Life, and Short-Term Disability benefits, as well as a Retirement Plan. All Colorado Associates are also entitled to accrue, and use paid sick and safe leave.

Job Requirements:

Machine Operator Job Requirements

• Follow safety guidelines
• Follow standard work instructions as assigned
• Perform hands-on tasks
• Lift up to 50lbs, stand, bend, and reach
• Maintain clean and organized workspace
• Troubleshoot equipment issues
• Ensure product meets customer specifications
• Meet production standards
• Work in a team environment
• Accurate recordkeeping and quality documentation
• Inspection of product