Warren, Michigan (High Skilled)

ResourceMFG is in need of experienced Wire Harness Assembler on 1st at our Plant Facility in Fraser, MI on 14 mile and Kelly.

WIRING EXPERIENCE (1 year) REQUIRED TO APPLY ! 

Pay Rate: $17.20 per hour

Shift: 6:30am-4:45pm

Unlimited $100 Referral Bonuses

DIRECT HIRE 
Get paid weekly
Medical, Dental, Vision Benefits
Free Online College Courses

Cable Assembler Job Description:

•Build and hand test product under supervision, while conforming to customer build instructions

•Perform a variety of assembly operations involving the application of connectors and hardware on wire harnesses and/or cable assemblies (push, prep, pin) and assemble backend hardware
•Apply heat shrink, sleeving, labels and spot tie as required
•Operate presses and terminating equipment
•Cutting of sleeves and convoluted tubing per customer specifications

Job Requirements:

Cable Assembler Qualifications

•1 or more years of consecutive wire harness assembly experience required

Good eyesight and ability to distinguish colors
•Ability to use small hand tools and semi-automated equipment
•Highly skilled in working with team members in a productive manner
•Motivated and detail oriented

Apply at ResourceMFG.com

#rmfgindeed

We are seeking direct hire Die Setters on 1st shift, 2nd shift, and 3rd shift!

1st shift: 6:30am-3pm

2nd shift: 2:30pm-11pm ($0.50 shift differential)

3rd shift: 10:30pm-7am (Starts Sunday night) ($0.65 shift differential)

Pay: $19.50-20 per hour

The Die Setter is responsible for performing set ups of multi-cavity plastic injection molds. When necessary, assists other team members on the production floor with machine startups.

Roles and responsibilities

? Comply with all internal and OSHA required safety procedures and regulations.

? Completely and accurately sets tool for startup, including loading the machine with the approved molding process program and ensuring all plumbing, electrical, pneumatic, and hydraulic connections follow established set up guidelines outlined in the process book documentation.

? Responsible for the installation and removal of all auxiliary equipment used in the molding process.
? Complete work orders in SAP for molding equipment or tools.
? Responsible for maintaining high standard of housekeeping, including appearance and condition of all thermolators, robot pendants and hot runner temperature controllers.
? Responsible for upkeep of machine platens.
? Responsible for in-press preventive maintenance of molds, including dry ice pellet blasting and application of mold cleaner and mold release.
? Responsible for accurate and timely records, including quality and set-up documentation on paper, Raypro MES and SAP.
? Maintains organization of die-setting station to aid in SMED initiatives.
? Maintains company issued tools and equipment.
? Coordination with material handlers, process technicians and supervisor to meet customer production and shipping requirements.
? Work overtime when necessary.
? Stops the process if nonconforming or suspect material is found and follows systematic troubleshooting process.
? Participate in and contribute to ATOMS CI and OpEx initiatives and provide input on how to continuously improve our safety, quality, and cost performance.
? Other duties as assigned.

Job Requirements:

• High school diploma or equivalent.
• A minimum of one (1) year of experience as an injection mold setter with a range of IMM manufacturer, tonnage, and controller types.
• Knowledge of plastic materials and process parameters for injection molding.
• Mechanical aptitude and ability to use hand tools and operate overhead crane.
• Knowledge of 5S and SMED philosophy.
• Ability to lift 55 pounds.
• Excessive walking, bending, climbing, and lifting.
• Ability to climb a ladder.
• Requires alertness, precision, and methodical attributes.
• Visual demands while looking at parts.
• Must be able to speak, read and write English fluently.
• Must be able to work in the U.S.

We are seeking a Maintenance Technician for a direct hire role in Rochester Hills, MI!

Pay range: $28-32/hour

1st shift 6:30am-3pm

The Maintenance Technician will perform preventative maintenance and repairs on all presses and equipment, along with some building maintenance. They will also participate in Continuous Improvement activities to support company objectives.

Roles and responsibilities

• Troubleshoot issues and repair presses as necessary to prevent downtime.

• Follow Preventative Maintenance Program.

• Fabricate and repair equipment as needed.

• Maintain accurate records of maintenance performed.

• Perform building maintenance as needed.

• Use of safe job procedures.

• Maintain a clean and safe work area

• Work overtime as needed.

• Other duties as assigned.

Job Requirements:

Education and Experience

• High School diploma or equivalent

• 5 years’ experience working in a maintenance repair position.

• Previous experience in injection molding machine maintenance/ repair preferred but not required.

• Some knowledge of programmable logic controllers (PLC) preferred but not required.

• Some knowledge of robotics preferred but not required.

• Some college courses or technical school preferred but not required.

• SAP experience preferred, but not required.

Skills

• Strong mechanical aptitude.

• Ability to read electrical and hydraulic blueprints.

• Basic computer skills for entering data in the preventative maintenance database.

• Ability to work independently.

• Must be able to speak, read and write English fluently.

• Must be able to work in the U.S.

• Frequent bending, twisting, climbing, and walking.

• Ability to climb a ladder.

• Able to lift up to 55 pounds.

• Willing to work overtime as needed.

We are seeking direct hire Quality Inspectors on 1st shift, 2nd shift, and 3rd shift!

1st shift: 6:30am-3pm

2nd shift: 2:30pm-11pm ($0.50 shift differential)

3rd shift: 10:30pm-7am (Starts Sunday night) ($0.65 shift differential)

Pay: $21 per hour + $0.50 per hour after 90 days

The Quality Inspector will perform inspection verification and monitors processes associated with the Operations activity. They will support activities in the hold area and acts as the Quality Liaison to the plant floor personnel. They will also participate in Continuous Improvement activities to support company objectives.

Roles and responsibilities

• Conducts all elements under the Quality Inspector section of the Start Up procedure and verification of entire First Shot Approval requirement as well as Last Shot requirement.

• Verifies Plastic Technicians are effectively conducting part inspections to the Operator Instruction Sheets.

• Conducts lab testing that is required per the Operator Instruction Sheet (such as micrometers, gauges, etc)

• Creates Internal Quality Alert on the plant floor for reported part quality issues.

• Document inspection results and comments related to part quality issue in system and other forms of reporting accordingly.

• Puts suspect product on hold, verifies inspection is conducted per requirements and releases from hold when verification is complete.

• Ensures Plastic Technician follows quality directives (OIS, Quality Alert, system entries, etc.).

• Provide knowledge of process and product quality to plastic technician.

• Perform daily audit of Process Technician with effective part inspection, gage use, reporting tools and systems.

• Perform containment activities and laboratory testing as required, using the provided testing equipment.

• Perform internal audit according to schedule.

• Maintains documented inspection and test results in electronic archive.

• Maintains internal concern log for areas of responsibility.

• Maintains the order of gage storage and First Shot/Last Shot bins.

• Maintains reliability of “rabbit” master samples for poke-yoke.

• Communicate quality issues (and other quality related items) on shift communication meetings.

• Performs any other Quality related function or duty as requested.

• Assists in disposition of product on hold and assist the Quality Engineer and Coordinator as required.

• Assists the Quality Engineer & Operation Team with Root Cause Analysis and Corrective Action process.

• Other duties as assigned by the Quality Manager and Quality Supervisor.

Job Requirements:

• High School Diploma
• Ability to use assigned lab equipment and test procedures.
• Basic computer skills.
• Ability to read blueprints
• Previous experience in a Quality related position (preferred but not necessary)
• Able to lift 55 pounds.
• Standing, bending, lifting, and walking on a cement floor daily.
• Ability to visually inspect parts with accuracy.
• Use of computer with some repetitive mouse use, keyboarding, and visual demands.
• Must be able to speak, read and write English fluently.
• Must be able to work in the U.S.
• Must be able to travel for training (up to 3 consecutive weeks)

We are seeking a CMM Programmer for a direct hire role in Rochester Hills, MI!

2nd shift 2:30pm-11pm

Pay: $60,000-$67,000

The CMM Programmer will perform precision dimensional measurements, including layouts for new products, PPAP packages, prototype, and engineering changes. They will also perform statistical testing to determine capability, repeatability, and acceptability of product. The CMM Programmer also participates in Continuous Improvement activities to support company objectives.

Roles and responsibilities

? Determines part acceptability of complex layouts through an accurate and detailed layout using CMM and other advanced measurement systems.

? Ability to program CMM (PCDMIS CAD++ version 2022.1), Smart Scope, Aicon 3D Scanner and other advanced measurement systems.

? Performs required statistical analysis of data obtained from product samples.

? Prioritizes and conducts required layouts according to daily schedule or as assigned by Management.

? Performs GR&R studies to establish repeatability and reproducibility.

? Assists Manufacturing Department in completion of capability studies.

? Participates in APQP Project kick off to review drawings and GD&T specifications.

? Assists in the maintenance of Quality Department files.

? May participate in corrective action process due to customer or internal concerns.

? Attends various internal and external meetings as a Quality Representative, as well as an active member of company teams.

? Assists the Quality Department in continuously improving the integrity of the department.

? Other duties as assigned.

Job Requirements:

Education, Experience and Skills

? High School Diploma or equivalent. 

? Minimum four years’ experience in a Quality Assurance position with detailed layout experience.

? Proficient in developing CMM and 3D Scanning programs

? Proficient in blueprint reading and GD&T methodology.

? Minimum two years’ experience with programming of CMM, Smart Scope and a variety of advanced measurement systems:

• Brown & Sharpe Mistral CMM (PCDMIS CAD++, version 2022.1) 
• OGP Smart Scope Flash Optical Gaging (Program measurement 3D multi-Sensor)
• Hexagon AICON Scanner Optocat 2020R3

? Some technical and/or statistical training in Metrology and SPC (Minitab).

? Working knowledge of MS Office (Word, Excel, Outlook) and basic computer skills.

? Must be able to speak, read and write English fluently.

? Must be able to work in the U.S.

Get to know ResourceMFG, the largest manufacturing specialty staffing company in America. We’re NOW HIRING general laborer for a safe and reputable manufacturer in this area. Entry Level workers are welcomed!

Offering reliable and competitive weekly pay, benefits, and FREE online skills training with 80 complete work hours. If you are a quick learner and want the chance to get ahead, this is one job you don’t want to miss out on.

Available Shifts:

1st shift 7:00am-3:30pm

Job description 

Set up and operator Screw Machines. Needs to be detailed oriented and a team player. Must be able to work on their own when given tasks with little supervision. Would like someone with experience but willing to train an individual if they are willing to learn.

Job Requirements:

Job Requirements 

-experience needed working at a screw company 

-experience with metal cutting and or grinding 

-Highschool Diploma/GED