Houston Southwest, Texas

Pipe Fitters for days and nights

Job Summary:

Pipe Fitter lay out, assemble, install and maintain pipe systems, pipe supports, and related hydraulic and pneumatic equipment.

Duties:

Interpretation of mechanical drawings, including the ability to read weld symbols

Knowledge of wire and filler materials applications for various steel alloys, aluminum, and some exotic materials

Working knowledge of fixturing and weld set up parameters (amps, volts, etc.)

Convention and precision measuring instruments

Process inspection, certification, and documentation

Welding equipment maintenance and inspection

Finish grinding applications using manual and power tools

Safety and housekeeping

Other duties as assigned by supervisor

Requirements:

Minimum 3+ year experience working within a manufacturing environment/facility

Be prepared to stand for 8–10-12 hour shifts

Resume required

Pay: $25-$33 depends on experience; 2nd shift differential

Shift: 1st shift - 6am - 6:00pm (flexible to work 10/12 hours)

Shift: 2nd shift – 4:30 pm – 3:30 am (flexible to 10-hour shifts/Saturdays required)

Job Requirements:

Structural Welder

Structural Welders for our Centrally located client manufacturer of complex engineered skids.

3-5 years of experience.

Structural welding in a shop environment.

Ability to read blueprints, schematics Proficient with welding processes.

Exceptional math and measurement skills.

Qualified candidates must pass weld test 3G & 4G MIG/Flux-core

Fitting experience 2-3 years

Fit, cut and tack material

Prepare welding joints

Conventional and measuring instruments

Finish grinding applications using manual/power tools

Resume required

1st shifts 6am to 6:30pm; Mon to Sat

2nd shifts 5:30pm to 4:00am; Mon to Sat w / 2nd shift differential

Pay range: $24-$30 depends on experience

Job Requirements:

Inventory Control Specialist

Job Duties:

Perform routine cycle counting of inventory.

Develops, executes, and oversees annual, monthly, and weekly cycle  count planning for all inventory locations/warehouses.

Assists in the planning and execution of annual physical inventory.

Entry of transactional data into ERP system in an accurate and  timely fashion.

Ensuring warehouse inventory balances are maintained at the  highest-level accuracy possible.

Performs floor to book and book to floor counting of inventory.

Compares and analyzes inventory balance discrepancies.

Determines root cause analysis for inventory discrepancies.

Prepares, maintains and distributes inventory metrics dashboard to  organization,

Provides recommendations for process changes and technology changes  to improve inventory accuracy.

Open bales, crates, and other containers.

Assist in counting of  inventory.

Weighing and counting items for distribution within plant to ensure conformance to company standards.

Recording amounts of materials or items received or distributed via appropriates computer program.

Resume required

1st shift - 6am-4:30pm  

Pay - $19 - $25 depends on experience

Job Requirements:

Machine / Saw Operator

The machine / saw operator is responsible for operating equipment such as bandsaws, lathes, milling machines, and grinders within the piping and structural fabrication departments.

Duties:

Operate machinery such as saws, lathes, milling machines and grinders

Operate overhead cranes 

Maintain raw material inventories

Ability to read blueprints and follow product specification instructions

Requirements:

Minimum 2 years fabrication experience

Expected to lift up to 50 lbs.

Able to stand for 8-10 hour shifts.

Resume required

Pay: $18-$22 depends on experience / 2nd shift differential

Shift: 2nd shift - 4:30 pm - 3:30 am

Shift: 1st shift - 6:00am - 6:30pm

Job Requirements:

Industrial Painter/Blaster

Our client who delivers packaged modular systems engineered and manufactured in one of our Houston facilities, which are utilized in data centers, power and commercial/industrial utility system applications.

Job Skills:

Surface preparations & protective coatings applications on above ground piping; steel structures

Operate/maintain various blasting, spraying & other equipment

Ability to read read/interpret documents written in English

Application of paints & specialty coatings (epoxies, urethanes & zincs)Ability to utilize scaffolding, rigging, access, containment systems, & safety equipment

Experience with industrial coatings, application process, 2-part mixing process, HVLP equipment, consistent millage

Minimum Requirements:

2-5 years of experience on industrial painting

Day shift and Night shifts available

1st shift - 6am - 5:30pm

2nd shift - 4:30pm - 2:30am

$20 - $24 depend on experience

Resume required

Job Requirements:

Electrical Assembler

Job Summary: 

Position requires assembly of all electrical components as needed  

Duties:

Perform manual processes to complete mechanical and electrical assemblies and sub-assemblies, using hand, electric and pneumatic tooling

Reports defective material or questionable conditions to the department supervisor

Maintain the work area and equipment in a clean and orderly condition and follows prescribed safety regulations.

Complete tasks as directed by manufacturing schedule with minimum supervision

Other duties as directed by supervisor

Requirements:

Ability to establish methods and procedures

Familiarity with assembly and measuring tools, interpretation of visual aids and ability to perform simple shop math

Good command of the English language, both written and verbal is required

Competency in reading and interpreting engineered drawings, schematics or other technical documents

Able to lift up to 50 lbs.

Able to stand for 8–10-hour shifts

Resume required

Pay: $18 - $25 depend on experience

Shift: 1st shift 6:00 am – 4:30 pm (10-12 hour shifts/Saturdays required)

Job Requirements:

Mechanical Assemblers - Various locations

Job Summary:  

Mechanical Assembler

Will manually assemble packaged equipment.

Duties: 

Perform manual processes to complete mechanical and sub-assemblies, using hand tools, and electronic and pneumatic tooling.

Maintain the work area and equipment in a clean and orderly condition and follows prescribed safety regulations.

Use and be familiar with assembly and measuring tools, interpret visual aids and must be able to perform simple shop math.

Requirements: 

Minimum one year working within a manufacturing environment/facility 

Ability to read and interpret P&ID, ISO, and engineering assembly drawings

Ability to read fabrications drawings is a plus

May work at different workstations as production needs require, or shifts from one station to another during the assembly process.

Have the ability to lift up to 50 lbs.

Expected to stand for 8–10-hour shifts.

Facility is a non-climate-controlled environment.

Exposed to any number of elements but with none present to the extent of being disagreeable.

Resume required.

Pay: $17 - $24; depends on experience

Shift: 1st shift 6:00 am – 4:30 pm (10-hour shifts/Saturdays required)

Job Requirements:

Pipe Welder

Job Summary:

Pipe welder proficient in welding techniques

Pay: $25-$31 DOE

Shift: 2nd shift – 6:00 pm – 5:30am, (flexible to 10-hour shifts/Saturdays required)

Duties: 

Proficient in assigned welding techniques• Interpretation of mechanical drawings, including the ability to read weld symbols

Knowledge of wire and filler materials applications for various steel alloys, aluminum, and some exotic materials

Working knowledge of fixturing and weld set up parameters (amps, volts, etc.)

Convention and precision measuring instruments

Process inspection, certification, and documentation 

Welding equipment maintenance and inspection

Finish grinding applications using manual and power tools• Safety and housekeeping

Other duties as assigned by supervisor 

Requirements: 

Minimum 3+ year experience working within a manufacturing environment/facility 

Able to lift up to 50 lbs.

Able to stand for 8–10-hour shifts

Resume required

Job Requirements: