Santa Clarita, California

We're Hiring Machine Operator: Conventional Grinder

1st and 2nd shift available

Pay rate: DOE

This company is an FAA 145 Repair Station specializing in landing gear and hydraulic component overhaul. Currently we are seeking talented individuals to perform conventional grinding of landing gear components using machinery such as;

• Gap Grinders - 1st. Shift
• O/D Grinders - 2nd. Shift
• I/D Grinders - 2nd. Shift
• Flat/Surface Grinder - 2nd. Shift

Responsibilities include;

• Set up and machine operations on high strength steel and aluminum parts.
• May run one or more machines on a regular basis.
• Each machinist is responsible for ensuring that machine work meets dimensional tolerances as noted on shop planning and that defects are removed within specified limits.
• To inspect parts visually and dimensionally, and perform clean-up operations as required such as deburr and breaking of edges

 #nowhiring

Job Requirements:

Knowledge and Skill Requirements.

• The ability to read, write and understand English
• Detail oriented
• Ability to read and understand OHM/ CMM's, blueprints, shop travelers and sketches
• Ability to identify different plated surfaces such as chrome plate, nickel plate, cad plate and various thermal sprayed surfaces
• Must be able to perform measurements using inspection tools such as, but not limited too; micrometers, dial bore gages, telescope gages, height gages, and indicators
• General knowledge of set-up, loading and adjusting machines and equipment

Practical experience with the procedures, practices, inspection methods, materials, tools and equipment generally used in the work for which the repair station is rated

Location: Valencia, CA

Schedule:  Monday – Friday 8:00 AM – 4:30 PM

Industry: Manufacturing 

Pay: $24-$32 per hour

Employment Type: Temp-to Hire 

About the Company

A leading Distribution company in Valencia, CA is seeking a detail-oriented and reliable Welder/ Fabricator  support daily operations. This is an excellent opportunity for someone who thrives in a fast-paced environment and is looking for long-term growth.

Job Responsibilities

• • Performs repairs in accordance with safety rules and OSHA requirements.
  • Performs all plant Fabrication needs including Injection Molding Tools.
  • Performs preventative maintenance inspection (PM); diagnose, repair, and rebuild major equipment/components including injection machinery, hydraulic power packs, diverters, compressors, trash compactors, motors, fans, pumps, forklifts, material loaders, and building equipment.
  • Maintains DEI (Daily Equipment Inspections) backlog.
  • Establishes and adjusts work procedures to meet production schedules and advises plan maintenance manager if additional work is needed or cannot be completed with the Standard Repair Times (SRTs)
  • Recommends measures to improve production, equipment performance, and product quality.
  • Performs service calls for emergency breakdowns.
  • Maintain a clean and safe work area in compliance with corporate/OSHA Standards and perform all work in accordance with established safety procedures.

Benefits

• Weekly pay
• Opportunity for long-term growth
• Positive and supportive work environment
• Temp-to-hire opportunity for top performers (if applicable)

#nowhiring

Job Requirements:

Speak, read, and understand English.
• Must have fabrication experience or knowledge of Mig/Tig/Arc/Oxy Acetylene/Brazing etc. and Oxygen/Acetylene torch cut and heat.
• Must have reliable transportation to get to work daily. Any attendance issues in the first 90 days of employment may result in the automatic end of the assignment.
• Experience in a fast-paced, production-based warehouse or manufacturing environment preferred.
• Knowledge of safety rules in typical warehouse/manufacturing/production areas.
• Must be able to stand most of the 8-hour workday.
• Must be able to drive a forklift (standing & sit down).
• Lifting maximum of 65 lbs.
• Actively engages in a team-based environment.
• Ability to effectively troubleshoot and identify mechanical issues.
• Ability to perform under limited supervision.
Rev. B 3/5/24
• Requires a flexible work schedule which may include nights and weekends to support the operating schedule and the needs of the facility.
• Ability to multi-task and manage multiple priorities.
• Must possess personal tools.
• Experience using inspection equipment such as Calipers, Micrometers, and soldering, manual lathe, or vertical mill, and drill press.
• Ability to effectively troubleshoot and identify electrical systems including but not limited to;