San Jose, CA

We are now looking for Debug/Repair Technicians for our Client in the PCB Manufacturing industry.

Pay Rate: $32-$40
Shift Time: 8am-4:30pm

Nature of Duties/Responsibilities:
• As a Failure Analysis Technician, you will be responsible for the hands-on technical
analysis of devices and components to determine rapid root cause for issues that are seen
in testing, manufacturing, and in the field.
• In this role, you will perform both electrical fault isolation and physical failure analysis
for root cause diagnosis
• Document and communicate results to engineering team.
• Document and report any significant findings with photographs or samples to appropriate
engineering team, Manufacturing, or Operations personnel and data entry.
• Identify root cause of customer returned product failures using principles and electrical
test equipment.
• In a timely manner identify failures at the component level, interpret data from various
techniques to deduce root cause of the failure.
• Enter information into a database concise failure analysis information, communicate
effectively, and deliver the results precisely to the Management team both internally and
externally
• Works on assignments that are semi routine in nature but recognizes the need for
occasional deviation.
• Be able to troubleshoot rejected analog and digital assemblies down to component level
• Normally follows established procedures on routine work; requires instructions only on
new assignments.
• Must display the ability to read, understand and follow test process instructions (TPIs)
• This position requires skills for general assembly and disassembly of electronic
equipment using basic hand tools.

Job Requirements:

Education and Experience:
• Minimum 6 years manufacturing electronic test technician experience required
• Strong demonstrable experience with electrical test equipment: Power Supplies,
Multimeters, Oscilloscopes, and other common measurement equipment
• Demonstrate detailed root cause analysis troubleshooting skills.

We are now looking for an Expeditor for our client in the PCB Manufacturing Industry! Pay rate: $22-$25 Shift Time: M-F 8am-5pm Job Description: – Expedites open orders to meet required dates according to MRP/Customer request. – Ability to interact with peers and easy communication. – Escalate material issues to upper management in a timely manner – Daily contact with suppliers by phone, e-mail and face to face if needed – Help buyers in material issues resolution such as RDL (Receiving discrepancies, AP issues, Cycle down/up materials, work on expediting items in shortage reports, MRP supply demands, price issues, RMAs, MRB, RTV, open POs delivery updates and activities related to materials. REQUIREMENTS – 5+ years’ experience in materials / supply chain. Bachelor’s Degree preferred. – Demonstrated ability to provide effective interaction, motivation, influence and decisive direction with management, suppliers and peers to meet department and company goals and objectives. – Excel skills (medium – advanced preferred) – Background in materials / supply chain – Quoting experience – Experience working with suppliers – Self motivated – Work under objectives and metrics – Ability to provide clear and timely verbal and written communications to management, suppliers and peers. If interested, please APPLY NOW!

Job Requirements:

- Expedites open orders to meet required dates according to MRP/Customer request.

- Ability to interact with peers and easy communication.
- Escalate material issues to upper management in a timely manner
- Daily contact with suppliers by phone, e-mail and face to face if needed
- Help buyers in material issues resolution such as RDL (Receiving discrepancies, AP issues, Cycle down/up materials, work on expediting items in shortage reports, MRP supply demands, price issues, RMAs, MRB, RTV, open POs delivery updates and activities related to materials.

REQUIREMENTS
- 5+ years' experience in materials / supply chain. Bachelor's Degree preferred.
- Demonstrated ability to provide effective interaction, motivation, influence and decisive direction with management, suppliers and peers to meet department and company goals and objectives.
- Excel skills (medium - advanced preferred)
- Background in materials / supply chain
- Quoting experience
- Experience working with suppliers
- Self motivated
- Work under objectives and metrics
- Ability to provide clear and timely verbal and written communications to management, suppliers and peers.

If interested, please APPLY NOW!

Job Purpose: Performs routine go/no-go tests of circuits, components, instruments and mechanical assemblies. Sets up test devices using hand tools or automatic test methods. Documents test results. May perform simple repairs and/or component removal or replacement. May maintain logs and records indicating malfunctions. Nature of Duties/Responsibilities: Perform Sub assembly and system level functional test using MPI, WI, Test Procedures, e-Traveler & other supplied documentation as required. Be able to differentiate between Real and False rejects, address and correct False Rejects when related to Setup or Operation. Preferred at least 2 Years experience with Telecommunications , Networking, Switchers appliances as Test Operator Education and Experience: Must be able to read, write, speak and understand verbal instructions in English. Able to lift 50 lbs Must have the ability to test assemblies to verbal or written instructions, or by following Test Process Instruction. Must have basic understanding of Electronic Networking Appliances Must be available for OT and weekend work as required in addition to minimum 40 hr./wk

Job Requirements:

Performs routine go/no-go tests of circuits, components, instruments and mechanical assemblies. Sets up test devices using hand tools or automatic test methods. Documents test results. May perform simple repairs and/or component removal or replacement. May maintain logs and records indicating malfunctions.
Nature of Duties/Responsibilities:
Perform Sub assembly and system level functional test using MPI, WI, Test Procedures, e-Traveler & other supplied documentation as required.
Be able to differentiate between Real and False rejects, address and correct False Rejects when related to Setup or Operation.
Preferred at least 2 Years experience with Telecommunications , Networking, Switchers appliances as Test Operator
Education and Experience:
Must be able to read, write, speak and understand verbal instructions in English.
Able to lift 50 lbs
Must have the ability to test assemblies to verbal or written instructions, or by following Test Process Instruction.
Must have basic understanding of Electronic Networking Appliances
Must be available for OT and weekend work as required in addition to minimum 40 hr./wk

We are now looking for a Shipping Data Entry Clerk opportunity for our client in the PCB Manufacturing Industry!

Pay Rate: $20-$24 DOE
Shift Time: M-F 8am-4:30pm

Job Responsibilities:

– International shipment (need to create Commercial Invoice, File in AES),

– Filing, pulling proof of delivery, spreadsheets for shipping and Memos

– Oracle transaction- included invoicing.

If you are interested, please APPLY NOW!

Job Requirements:

Requirements:

- 2 years of experience with international shipment

- Excel & MS Word

- Oracle Knowledge

- Experience with Invoicing

We are now looking for a Manufacturing Equipment Maintenance Mechanic for our client in the PCB Manufacturing Industry!

Pay Rate: $24-$30 DOE
Shift Time: Mon-Fri 2:30pm-11pm

Nature of Duties/Responsibilities:

– Maintain production equipment in a manner that meets company standards and ensures minimum equipment downtime

– Familiar with PCBA manufacturing equipment, being able to understand and utilize manufacturer user manuals for troubleshooting and preventive maintenance work

– Hands on knowledge of the SMT equipment, paste printing, pick-n-place (Fuji preferred), feeders, re-flow ovens, wave soldering machines and other machines used for PCBA processing

– maintain preventive maintenance records for equipment

– support production with set up of some of the machines

If interested, please APPLY NOW!

Job Requirements:

Education and Experience:

- Must have 5+ years prior experience.
- Perform preventative maintenance on various types of SMT, 2nd opt and 3rd opt equipment.
- SMT machines and mechanical equipment debug experience a must.
- Strong math skills, including metric and standard measuring systems.
- Knowledge of Fuji equipment.
- Troubleshooting, repairs of equipment using schematics or drawing required.
- Able to perform electrical and mechanical troubleshooting to determine problems.

We are now seeking SMT Quality Inspectors for a manufacturing client located in Santa Clara, CA! Shift time:8:00AM-4:30PM Pay rate: $23-$25 DOE Benefits: -Health Insurance, Dental, Vision -$200 Bonus Referral Program Duties: Reviews MPI, Deviations, ECO, Job Specific Customer Documentation before performing inspection. Conducts SMT First Article Inspection. Stops the production line for any major quality issues. Immediately inform Production Lead and Engineering when a line stoppage occurs. Provides daily Quality Pass down report. Reviews Production Schedule or Instructions from Lead/Supervisor. Raises and reviews Technical Inquiries for any discrepancies on the production line observed. When there are discrepancies, do not start a job without any authorization from Engineer / Supervisor. Assists areas that are bottleneck per Supervisor/Engineer/Manager direction. Escalates all issues to Supervisor / Engineer / Manager. If matters are unresolved, notifies the Quality Manager immediately. Attends training and implements all procedures pertaining to Production, such as ESD, Housekeeping, First Article, Maintenance, Safety, Test and Inspection Procedures, MSD Handling procedure, IPC-A-610, etc. Makes suggestions on process and quality improvement to Supervisor / Engineer / Management Be able to associate defects to workmanship standards specified by IPC-A-610 (class 2 and 3) as well as customer requirements. Requirements: Minimum High school Minimum 2 years of working in an electronics inspection environment within the CM or similar environment. IPC-A-610 or J-STD-001 experience is a must. Skills: Basic computer competence with MSWord, Excel and Outlook Ability to read, write and communicate effectively in English to the degree necessary to perform the job. Proficient at reading and interpreting blueprints, drawings, bills of material, etc If interested in this position, apply now.

Job Requirements:

Reviews MPI, Deviations, ECO, Job Specific Customer Documentation before performing inspection.

Conducts SMT First Article Inspection.
Stops the production line for any major quality issues. Immediately inform Production Lead and Engineering when a line stoppage occurs.
Provides daily Quality Pass down report.
Reviews Production Schedule or Instructions from Lead/Supervisor.
Raises and reviews Technical Inquiries for any discrepancies on the production line observed. When there are discrepancies, do not start a job without any authorization from Engineer / Supervisor.
Assists areas that are bottleneck per Supervisor/Engineer/Manager direction.
Escalates all issues to Supervisor / Engineer / Manager. If matters are unresolved, notifies the Quality Manager immediately.
Attends training and implements all procedures pertaining to Production, such as ESD, Housekeeping, First Article, Maintenance, Safety, Test and Inspection Procedures, MSD Handling procedure, IPC-A-610, etc.
Makes suggestions on process and quality improvement to Supervisor / Engineer / Management
Be able to associate defects to workmanship standards specified by IPC-A-610 (class 2 and 3) as well as customer requirements.
Requirements:
Minimum High school
Minimum 2 years of working in an electronics inspection environment within the CM or similar environment.
IPC-A-610 or J-STD-001 experience is a must.

Skills:
Basic computer competence with MSWord, Excel and Outlook
Ability to read, write and communicate effectively in English to the degree necessary to perform the job.
Proficient at reading and interpreting blueprints, drawings, bills of material, etc

If interested in this position, apply now.