Maryville, Tennessee

Warehouse Technician - Forklift - MIG/TIG Welder

Pay Rate: $20.50 per hour

Schedule: Monday – Friday, 8:00 a.m. – 4:30 p.m.

Overtime: As needed based on operational demands

The Warehouse Technician is an active team member responsible for maintaining control of the division’s inventory, tools, and equipment. This role supports operational efficiency through accurate inventory tracking, tool management, and hands-on shop support including forklift operation and light welding tasks.

Key Responsibilities

• Maintain perpetual inventory of tools, equipment, and stock using company systems

• Receive, inspect, unpack, and store incoming materials and equipment

• Monitor stock levels and initiate requisitions to replenish inventory

• Track and document all tool transactions to support cost control and accountability

• Inspect tools and equipment for damage or wear; coordinate repairs or replacements

• Retrieve tools and equipment at the close of production shifts

• Operate forklifts to move materials, tools, and equipment safely within the facility

• Perform light welding and fabrication tasks as needed to support operations

• Maintain a clean, organized, and safe tooling and warehouse environment

• Comply with all company safety policies and procedures

Job Requirements:

Qualifications

• Prior warehouse, tool room, or industrial support experience preferred

• Forklift experience required (certification preferred or ability to obtain)

• Basic welding experience (MIG/TIG preferred)

• Ability to lift, move, and handle materials in a shop environment

• Strong attention to detail and organizational skills

• Basic computer skills for inventory tracking systems

#nowhiring

EmployBridge is now URGENTLY hiring Instrumentation Technicians in Oak Ridge, TN. 

Pay: $22/hr - $32/hr based on experience 

Schedule: 6AM-4:30PM Monday - Thursday (4 - 10 hour shifts) 

Job Duties:

• Install, maintain, and repair instrumentation and electrical (I&E) devices, including temperature, pressure, and flow sensors, switches, and valves (pneumatic and electronic).
• Read and interpret P&ID diagrams and work with programs such as Set Route for electrical verification and component tracking.
• Support calibration staff by providing technical expertise, including troubleshooting field equipment and evaluating repair vs. replacement decisions.
• Diagnose and repair issues in-field; determine if re-calibration is sufficient or if equipment replacement is necessary.
• Assist in the assembly, disassembly, and wiring of systems per manufacturer specs, blueprints, and plant engineering drawings.

Job Requirements:

Requirements for this role:

• 3–5+ years of experience in instrumentation and control (I&C), ideally in nuclear, petrochemical, or pharmaceutical environments
• Strong understanding of valve work, instrumentation troubleshooting, and field-level diagnostics
• Familiarity with calibration principles and the ability to support calibration technician

 #NOWHIRING

EmployBridge is now hiring Warehouse General Laborers in Athens, TN.

Are you looking to get your foot in the door doing warehouse work?  We have immediate openings for Warehouse General Labor!

No Experience?  NO PROBLEM!!  We will train!!  These roles are Temp to Hire!!  

Shifts

• Evenings- 2nd - $17.44/hr: 2:30pm-11pm
• Nights- 3rd - $17.49/hr: 10:30pm -7am

 Job duties for the Warehouse General Laborer position:

• General Labor Moving/Loading steel rods onto conveyor system by hand
• Moving product throughout the warehouse

 Requirements for the Warehouse General Laborer position:

• Must be comfortable with physical work 
• Must be able to lift up to 50 lbs.
• Must be able to lift repetitively
• Must have High School Diploma/GED 
  
  
  #nowhiring

Job Requirements:

Don't wait! Apply today & start ASAP. 

Forks of the River Area - General Operator

2,2,3 Schedule - 7:30am-7:30pm or 7:30pm-7:30am

Blade Grind:

1. Maintain and operate blade grinding machines in a high-speed manufacturing environment.

2. Regulate machining by setting and adjusting controls.

3. Maintain specifications by observing quality standards and utilizing precision measurement equipment

Blade Sub Assembly:

1. Maintain and operate blade grinding machines in a high-speed manufacturing environment.

2. Regulate machining by setting and adjusting controls.

3. Maintain specifications by observing quality standards and utilizing precision measurement equipment

Blade Finish:

1. Set up, adjust, maintain, and operate equipment to produce blades of acceptable quality.

2. Perform visual and mechanical tests on blades to assure quality.

3. Maintain necessary records/charts; keep work area and equipment clean.

Job Requirements:

Requirements of this role: 

• Stable work history over last 5 years
• High School Diploma/GED
• Previous MFG experience preferred 

Forklift Operators - $18.00- $20.00/hr. Based on experience

1st and 2nd Shift Available

ResourceMFG is urgently hiring forklift operators in Knoxville and surrounding areas. Applicants should be comfortable working in a fast-paced environment, loading and unloading trucks, stacking and staging pallets, verifying orders.

Job Requirements:

Requirement for this role:

• RF Scanner experience needed
• 2-3 years forklift experience
• Sit-down/Stand-up experience required

DON'T WAIT!! APPLY TODAY TO GET STARTED ASAP!!!