Yadkinville, North Carolina

Branch No: 20051

8642 West Market Street, Suite 134
Greensboro, NC 27409

Phone: (336) 668-3366

Available Positions

8 jobs for branch # 20051

Painter

Randleman, NC

Base Pay: 18.50 - 29.00

ResourceMFG is immediately hiring experienced Painter Blasters on 1st shift for a premier manufacturing company in Randleman!!  These are career opportunities with great pay, benefits and …

Continue reading "Painter"

ResourceMFG is immediately hiring experienced Painter Blasters on 1st shift for a premier manufacturing company in Randleman!!  These are career opportunities with great pay, benefits and growth opportunities.  

 

Shift Hours: 1st Shift Mon-Fri 6am-2:30pm OT as needed

Pay Rate: $18.50 -$2900 Depending on Experience

 

Summary

The Painter Technician is responsible for preparing and painting components and parts to quality and safety standards to prepare for shipping.

Minimum Qualifications

Previous painting experience mixing and applying an automotive grade, three-part epoxy paint on small and large assemblies required

  • Painter 1 – Minimum 6 months – 5 years
  • Painter 2 –  6 – 14 years
  • Senior Painter – 15 years or more
  • Ability to read and interpret work instructions, and written directions.

Essential Functions

The painter’s main responsibility is to prepare parts and /or assemblies for painting.

Prepare/mix paint (primer and topcoat) and apply paint to parts and assemblies to company quality and safety standards.

Inspect wet and dry paint mill thickness to ensure it meets company expectations for desired paint life.

Monitor material levels and report any shortages/issues to his/her supervisor.

Ensure that equipment is maintained, cleaned, and serviced on regular schedules.

Communicate with paint vendor and supervisor to assist with process improvements

 

 

Apply Now!

 

Job Requirements:

Physical Demands

Must be able to lift 40lbs and manipulate heavy test equipment and cables.

Manual dexterity to operate digital equipment, including computers and PLC’s, protective relays, controllers, and other such equipment with small fine buttons and operators.

Required to stand and walk on manufacturing floor throughout the day.

 

Physical Demands

Must be able to lift 40lbs and manipulate heavy test equipment and cables.

Manual dexterity to operate digital equipment, including computers and PLC’s, protective relays, controllers, and other such equipment with small fine buttons and operators.

Required to stand and walk on manufacturing floor throughout the day.

 

APPLY NOW!

Welder

Randleman, NC

Base Pay: 21.00 - 23.00

ResourceMFG is immediately hiring experienced Aluminum and Steel Welders  on 2nd Shift for a premier manufacturing company in Randleman!!  These are career opportunities with great pay, …

Continue reading "Welder"

ResourceMFG is immediately hiring experienced Aluminum and Steel Welders  on 2nd Shift for a premier manufacturing company in Randleman!!  These are career opportunities with great pay, benefits and growth opportunities.  

Shift and Pay for this Welder Position:

  • 1st Shift Monday - Friday, 3pm-11:30pm

 Job Duties as an experienced Aluminum an Steel Welder for ResourceMFG:

  • Focus of this position is producing steel parts in a timely and satisfactory manner
  • Responsible for any fabrication necessary and on time production of parts
  • MIG welding, tack up, grinding, cleaning, as well as assembly of skids and tanks
  • Accurately measure and cut different materials on different machines
  • Clean all slag, burrs, weld spatter, and repair any discontinuities in the materials, or the finished product

 

Apply Today!

 

Job Requirements:

Minimum Qualifications to be a successful Aluminum and Steel  Welder for ResourceMFG:

  • 1 year work experience
  • GED or High School Diploma
  • Good attention to detail
  • Follow all safety procedures
  • Ability to read a tape measure to the 1/16”
  • Basic ability to interpret sketches & blueprints
  • Proficient with hand tools i.e., Angle grinder, weld pliers, clamps, drills, impact, bench grinder, and air die grinders
  • Successfully complete the on boarding training program

Knowledge, Skills and Abilities to be an ideal Aluminum and Steel Welders for ResourceMFG:

  • Must be able to read, comprehend, and apply a WPS
  • Capable of passing a steel plate GMAW fillet weld break test in the 2F position, buttons test, 1G GMAW test, 3G vertical up, 3G vertical down
  • Must be able to set up oxyfuel and plasma torch as well as be able to make clean square cuts, straight cuts, beveled cuts, and wash welds
  • Ability to cooperate with a team and take directions from supervisors as well as level II and level III welders
  • Capable of operating the band saw, ironworkers, bench grinder, and port-a-band
  • Must be competent enough to determine if their own work is complete and correct as specified by instructions, drawings and specifications
  • Work independently or cooperatively with little hands-on instructions
  • Must have a solid understanding of weld joints and weld symbols
  • Ability to interpret blueprints / engineering sketches and correctly assemble them
  • Must be able to perform routine machine maintenance and trouble shoot issues
  • Ability to operate welder and replace gas cylinder or other parts
  • Ability to use hand and power tools

 

Apply Now!

 

Manufacturing/Production

Haw River, NC

Base Pay: 17.00 per HOUR

We are looking for a manufacturing production worker who can help with stripping and unwrapping hoses in the Haw River area! Pay rate: $17 Hours: …

Continue reading "Manufacturing/Production"

We are looking for a manufacturing production worker who can help with stripping and unwrapping hoses in the Haw River area!

Pay rate: $17

Hours: 2:30pm- 11:00pm

Operate stripping table and related equipment to remove mandrels from hoses.

Procedures

  • Load hoses onto the train for the vulcanizer. Run cure cycle.
  • Move cooled hoses onto the unwrap table.
  • Operate the unwrapper to remove rope and nylon cure tape from the hose.
  • Apply plastic wrap as required.
  •  Re-roll rope and nylon for further use.
  • Remove the lay line carrier strip from the hose.
  • Cut the hose end and attach to the sled.
  • Set proper air pressure.
  • Clamp the hose and lock into vice.
  • Apply air to break the hose free from the mandrel.
  • Pull the hose free from the mandrel using the sled.
  • Strip excess material from nipples and return to nipple storage at the main machine.
  • Move mandrels to the main machine or storage racks as needed.
  • Other duties: o Keep work area clean. o Empty trash cans. o Assist in other department jobs when needed or instructed by the supervisor.

Hose Builder

Haw River, NC

Base Pay: 18.00 per HOUR

We are looking for a hose builder for 2nd shift in Haw River for a rubber hose company!! Shift 2nd M-f 2:30pm -11:00pm Pay$18 Summary …

Continue reading "Hose Builder"

We are looking for a hose builder for 2nd shift in Haw River for a rubber hose company!!

Shift 2nd M-f 2:30pm -11:00pm

Pay$18

Summary Perform operations as required to build hose to specifications outlined on the work order and engineering master. Procedures

  •  Obtain work order and specification showing construction of hose to be made.
  • Review entire work order and specification to ensure proper building of hose.
  • Assemble required materials.
  •   Apply to mandrel as outlined in specifications. Ensure all materials are applied in proper sequence as outlined on the work order.
  • Apply identifying part numbers to finished hose as supplied with the work order.
  •  Cover finished hose with nylon wrap.
  •  If hose is corrugated attach rope.
  • Move finished hose to staging area for curing.
  •   Other duties: o Keep work area clean. o Empty trash cans. o Assist in other department jobs when needed or instructed by the supervisor.

Inspection

Haw River, NC

Base Pay: 18.00 per HOUR

Looking for someone to work as an inspector at a rubber hose company in Haw River area. If you have quality experience please apply! Hours: …

Continue reading "Inspection"

Looking for someone to work as an inspector at a rubber hose company in Haw River area. If you have quality experience please apply!

Hours: 7am-3:30pm

Pay $ 18.

 

This needs to be someone who is organized, has good reading comprehension, and able to learn the various types of products moving through our shipping department.

The job will consist primarily of checking pick tickets against products to ensure accuracy of the shipment. Other duties may include helping in shipping and/or inventory control, but only secondary to the primary job.

Final Assembly Tech

Randleman, NC

Base Pay: 18.50 per HOUR

Looking for Assembly techs and Enclosure Techs with sit down forklift experience for an elite client in Randleman, NC on 1st shift   Hours and …

Continue reading "Final Assembly Tech"

Looking for Assembly techs and Enclosure Techs with sit down forklift experience for an elite client in Randleman, NC on 1st shift

 

Hours and Pay rate

  • 1st Shift 6am-2:30pm Mon-Fri
  • $18.50-20.00hr

 

Job Duties of Assembly and Closeout techs:

 

  • Assemble large mechanical components of a generator and wiring of controls and house power
  • Sit Down forklift
  • Read blue prints
  • overhead crane
  • Apply Now!

 

Job Requirements:

Why work for ProLogistix/ResourceMFG?

  • Great places to work
  • Weekly pay periods
  • Unlimited referral bonuses
  • Health / Dental / Vision Benefits offered 
  • FREE career focused online classes

Apply Now!

Executive Admin Assistant

Greensboro, NC

Base Pay: 35.00 per HOUR

Who we’re looking for  A passionate, self-motivated, and highly organized Executive Assistant.   Primary responsibility of this role is to perform administrative duties supporting executive leadership. …

Continue reading "Executive Admin Assistant"

Who we’re looking for 

A passionate, self-motivated, and highly organized Executive Assistant. 

 Primary responsibility of this role is to perform administrative duties supporting executive leadership.

What you’ll be doing  

  • Manage corporate leaders’ calendars and events  
  • General administrative/clerical duties as assigned  
  • Create and update weekly/monthly reports 
  • Manage visitor schedules and accommodations 
  • Organize and prioritize requests for time with Executives in alignment with Executive and organizational priorities 
  • Create documents and presentations for Executive meetings 
  • Schedule travel and support with expense reports for Executives 
  • Daily, weekly, and monthly reporting of projects and activities 
  • Support senior executives outside normal business hours as needed based on executive travel or workload demands 
  • Manage requests related to usage of office and facility resources; facilitate necessary approvals, provide directions and contacts.  

What you bring  

  • Bachelor's degree (or higher) in Business Administration, related field, or equivalent professional experience. 
  • Intermediate to Advanced skill in Microsoft Word, PowerPoint, Excel 
  • Advanced skill in Microsoft Outlook 
  • Experience in a fast paced role requiring multi-tasking and consistent follow up to ensure tasks are completed in a timely manner 
  • Experience in a role utilizing organization skills (ability to prioritize multiple activities/tasks) 
  • Experience in a role with quickly changing responsibilities, tasks, assignments and the ability to manage a quick pace 
  • Experience supporting Executives in an administration role  

Added bonus if you have  

  • Japanese or other language skills 
  • Experience in a start-up environment 

Hours are 8am-5pm Mon-Fri, paying $35/hr in Liberty, NC

***APPLY TODAY!

Shipping Clerk

Stokesdale, NC

Base Pay: 20.00 per HOUR

Looking for Shipping Techs with sit down forklift experience for an elite client in Stokesdale NC on 1st shift   Hours and Pay rate 1st …

Continue reading "Shipping Clerk"

Looking for Shipping Techs with sit down forklift experience for an elite client in Stokesdale NC on 1st shift

 

Hours and Pay rate

  • 1st Shift 8am-5pm Mon-Fri
  • $20.00hr

Job Duties of Shipping Techs:

Must have Sit Down Forklift Experience.
Solid knowledge of shipping and receiving functions, procedures, reporting, attention to detail, Overhead crane(trained on), prepare reception area to receive incoming cargoes, flow of packages after shipment, loading and unloading of trucks, Storage Facility for finished Generator product. Crane Operator
Material Handling
Time Management
Team Collaboration
Problem Solving
Attention to Detail And other relevant skills

 

APPLY NOW!

 

 

Job Requirements:

Why work for ProLogistix/ResourceMFG?

  • Great places to work
  • Weekly pay periods
  • Unlimited referral bonuses
  • Health / Dental / Vision Benefits offered 
  • FREE career focused online classes

Apply Now!