St. Petersburg, Florida

NOW HIRING!! CNC Machinist - 2nd Shift Great Opportunity in Clearwater, FL

About the position:

Operate CNC HAAS Milling machine, CNC Lathe Okuma 10 & Okuma 10 SS and Okuma 12 with OSB 300 L Control (Okuma 10SS and 12 running with sub spindle live tooling). Our machines are 3-Axis, 4- Axis and 5-Axis, working with aluminum, plastic and stainless steel to make simple parts.

Job Duties include, but not limited to:

• Set up and tear down a work order on a CNC Machine.

• Responsible for in process inspection (utilizing calipers, micrometers)

• Responsible for making adjustments to offsets, and program as needed to maintain tolerances.

• Must be able to work off of blueprints

• Must be able to accurately use shop math in checking parts.

• Perform basic maintenance to the machines (clean and maintain, no mechanical repairs - weekly and monthly coolant maintenance)

• Maintain the machine within the scope of its ability.

• You will be expected to help around the shop with deburring, tapping, etc. as needed to keep parts moving

• Maintain all paperwork associated with producing the part and maintaining company records.

Benefits of working with us:

• Health, Vision and Dental Insurance

• Holiday pay
  
• Weekly pay
• Long term job opportunities with stability
• 40 hours plus over-time when needed
  

Job Requirements:

Required experience & qualifications:

• Machining Technology certification from a technical school, Machinist certification from a CNC manufacturer (such as OKUMA or HAAS) or equivalent.

• A minimum of two-years of hands-on Machining Operating experience.

• Working knowledge of shop math (Algebra, Geometry and Trigonometry).

• Must know how to use calipers and micrometers

Company located in Clearwater is hiring now for a Mechanical General Assembler.  

Pay rate:  $18+/hr. 

1st Shift  (Monday-Friday) 7am to 4pm.

Job Description

• Assemble products with a high level of speed and accuracy
• Maintaining highest quality and keep up with demand.
• Perform assembly operations to build light fixtures and accessories.
• Assembly requires riveting using a compressed air rivet gun
• Siliconing parts, twisting on parts, cleaning finished products and packaging 
• Depending on skill, soldering of small electronic components for electronic assembly.
• Maintaining workspace and assigned tools 
• Familiarity with materials and components - we will train
• Continuous training and learning of new products and materials 
• Observe and follow safety rules and regulations specific to your work area.

APPLY NOW! 

Benefits of working with us:

• Health, Vision and Dental Insurance

• Holiday pay
  
• Weekly pay
• Long term job opportunities with stability
• 40 hours plus over-time when needed
• Referral bonuses

Job Requirements:

Job Requirements

• Experience working in a manufacturing/warehouse environment preferred.

• Knowledge of basic tools, including, but not limited to hand tools, torque wrenches and drivers. 

• Knowledge of soldering tools, multi-meters a plus!

• Able to read and follow instructions and understand basic technical drawings.

• Good communication and positive attitude.

Physical Demands

The Mechanical Assembler must have ability to select, lift, carry, and stack product weighing between 30 and 50 pounds.

The ability to stand up to a total of 8 hours, with breaks while occasionally bending, stooping, and twisting. 

Repetitive work 2 to 4 hours at a time.  This position requires manual dexterity and constant use of hands to assemble using manual and power tools. 

Company located in Clearwater is hiring now for a Machine Shop Helper/Deburrer/Finisher  

Pay rate:  $18-$19/hr. 

1st Shift  (Monday-Friday) 7am to 4pm.

 About the position:

 Prepare parts at different stages of the machining process: cut, debur, polish, grind, smooth, buff - aluminum parts. Must have experience and be competent with hand and power tools that are used to smooth burrs and the sharp edges of aluminum parts.

Job Duties include, but not limited to:

• Metal cleaning: Clean different types of metal (mostly aluminum) with chemical cleaners.
• Debur: clean small machined parts by removing rough edges to make a smooth from the cuts made by the CNC machines.
• Polish: Use a polisher to bring a smooth, mirror-like finish to the materials and parts. This will also include high-end stainless steel lights before they are shipped out.
• Grinding: Take down material or smooth out welds or surfaces to be welded at multiple stages of the manufacturing process.
• Maintaining work space and assigned tools clean and orderly. 

• Help clean and organize the machine shop. 

• Wear proper PPE to protect self(respiratory, eyes, face).Observe and follow safety rules and regulations specific to your work area.
• Will be required to support other areas in the machine shop occasionally, loading / unloading raw aluminum parts, cleaning parts for machining.

• APPLY NOW! 

  Benefits of working with us:

  • Health, Vision and Dental Insurance

  • Holiday pay
    
  • Weekly pay
  • Long term job opportunities with stability
  • 40 hours plus over-time when needed
  • Referral bonuses

   

Job Requirements:

Required experience & qualifications:

• Experience working in a manufacturing environment.

• Skilled in shop math, able to read schematics/blueprints.

• Experience on welding preparation.

• Skilled with power tools such as polisher and grinder.

• Must be reliable and accountable-your position supports the machine shop.

Physical Demands

Must have ability to lift, carry, and stack product weighing between 35 and 45 pounds. The ability to stand up to a total of 8 hours, with breaks while occasionally bending, stooping, and twisting and do repetitive work for 2 to 4 hours at a time

PRINCIPAL DUTIES:

• Fully competent to spot weld. 
• Operator places two pieces of metal into a machine and the machine heats the metal to spot weld.  Machine has dials to control the heat, not much independent judgment needed to complete the task.
• Must be willing to accept and receive frequent supervision and assistance with regard to responsibilities
• Detects and reports defective materials or questionable conditions to the department supervisor
• Maintains the work area and equipment in a clean orderly condition and follows prescribed safety regulations
• Other duties as required

Job Requirements:

WORKING CONDITIONS AND PHYSICAL REQUIREMENTS:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Ability to work in a noisy, dusty, industrial/manufacturing environment with some exposure to non-toxic irritants
• Ability to work with machinery and moving parts
• Ability to work with moving vehicles, ladders, and scaffolding
• Ability to work at heights
• Ability to properly lift/carry/push/pull/manipulate/transport up to 25 lbs.
• Ability to occasionally lift up to 50 lbs, and frequently lift up to 25 lbs
• Ability to work in a non-climate controlled environment
• Ability to work in repetitive motions and pressure involving fingers, hands, and wrists
• The work requires some physical exertion such as long periods of standing or walking over hard concrete surface
• Exposure to recurring bending, crouching, stooping, kneeling, sitting, climbing,  stretching, reaching, or similar activities
• Ability to read, write, speak and  communicate in the English Language
• Must have the physical strength and ability to frequently work more than 40 hours weekly

Ability to operate all job necessary equipment including moving vehicles in a safe manner.  Persons under the influence of illegal drugs, alcohol or a prescribed medication which has a prescription warning to not operate machinery or drive a moving vehicle, shall not be considered as having the ability to operate the necessary equipment in a safe manner.

This position description is subject to change at any time without prior notice.  This position requires the individual to wear the appropriate PPE as determined by management.

We are seeking a detail-oriented and skilled HVAC Assembler to join our team. As an HVAC Assembler, you will be responsible for assembling and fabricating HVAC components, ensuring they meet quality standards, and ensuring all systems are constructed efficiently and safely. You will play a key role in the production of high-quality heating, ventilation, and air conditioning systems.

Key Responsibilities:

• Assemble HVAC units and components according to company specifications and blueprints.
• Read and interpret technical drawings, schematics, and work orders to assemble HVAC systems.
• Ensure all parts are installed correctly and securely, including ducts, wiring, compressors, fans, and other system components.
• Perform quality checks throughout the assembly process to ensure that systems meet safety, functionality, and quality standards.
• Install insulation, seals, and mounting hardware.
• Test and troubleshoot HVAC assemblies for functionality and performance.
• Maintain a clean and organized work area, following safety protocols and company procedures.
• Use hand tools, power tools, and machinery in the assembly process.
• Collaborate with other team members and supervisors to ensure efficient production flow.
• Adhere to safety guidelines and procedures to prevent injuries and accidents.
• Ensure all documentation and records related to assemblies are properly completed.

Job Requirements:

Preferred Skills:

• Experience with welding, soldering, or pipe fitting.
• Knowledge of safety regulations and compliance standards.
• Previous experience with HVAC testing and diagnostics.

Physical Requirements:

• Ability to lift, carry, and move heavy objects.
• Ability to stand, kneel, bend, and crouch for extended periods.
• Work in various environmental conditions (temperature, humidity,

Largo Company Now hiring Brake Press Operators/Fabricators

1st shift - $16-20 hr. DOE

The Sheet Metal Fabricator will be responsible for receiving in-bound shipments, organizing material, fabrication of trims and edge metal systems, fabrication of specialty components, and routine maintenance of equipment.

ESSENTIAL FUNCTIONS

• Prepare and complete orders for delivery or pickup according to schedule
• Receive and process materials received from vendors
• Perform inventory controls and keep quality standards high for cycle counts
• Keep a clean and safe working environment
• Communicate and cooperate with supervisors and coworkers
• Operate warehouse vehicles and equipment
• Follow quality service standards and comply with procedures, rules and regulations

Benefits of working with us: 

• Health, Vision and Dental Insurance

• Holiday pay
  
• Weekly pay
• Long term job opportunities with stability
• 40 hours plus over-time when needed
• Referral bonuses

Job Requirements:

MINIMUM REQUIREMENTS 

• Proven experience working with others
• Familiarity with sheet metal and sheet metal equipment
• Good organizational and time management skills
• Ability to lift objects greater than 50 lbs on a consistent basis
• Current forklift license
• High school or equivalent degree
• Willingness to take on special projects as assigned
• Building Products/Roofing Experience a plus