Skip to main content
Questions?  1-877-404-8449
ResourceMFG | Manufacturing Workforce Specialists

General Information

Available Positions

  • Lead Test Technician

    Location: Largo, FL Base Pay: 35.00 per HOUR

    Largo company now seeking a Lead Test Technician

     

    Pay:    $35-38 hr.

     

    Shift:   1st 

     

    Duties and Responsibilities

    • Perform standard testing processes on a variety of equipment and recording results
    • Interpret and follow written documents such as SOPs and safety rules
    • Requires knowledge of industry specific tests and testing equipment, alignment and troubleshooting test failures
    • Perform Key Performance Indicators:
      • Meet production deadlines
      • Quality of finished product (Pass/fail rates)
      • Support and lead problem solving
      • Compliance outcomes
    • Diagnose cause of electrical, optical or mechanical malfunction or failure of operational equipment and performs preventative and corrective maintenance
    • Interface with other departments to assure efficient flow of information and materials
    • Lead and support the training new team members
    • Support, communicate, reinforce and defend the mission, values and culture of the organization

     Secondary Duties and Responsibilities

    • Work from complex wiring and assembly drawings, operation sheets, engineering specifications and sketches and running sheets of significant complexity
    • Modify complex electrical prototypes to correct functional deviations

    Ensure compliance with all safety and regulatory requirements applicable to the company in accordance with State and Federal regulations and any applicable certification required to maintain the certification

     

    Apply Now Learn More
  • Senior Test Technician

    Location: Largo, FL Base Pay: 26.00 per HOUR

    Largo company now seeking a Senior Test Tech

     

    Pay: $24-32 hr

     

    Shift: 1st

     

    Duties and Responsibilities

    • Perform standard testing processes on a variety of equipment and recording results
    • Interpret and follow written documents such as SOPs and safety rules
    • Requires knowledge of industry specific tests and testing equipment, alignment and troubleshooting test failures
    • Perform Key Performance Indicators:
      • Meet production deadlines
      • Quality of finished product (Pass/fail rates)
      • Raw material stock levels
      • Compliance outcomes
    • Diagnose cause of electrical, optical or mechanical malfunction or failure of operational equipment and performs preventative and corrective maintenance
    • Interface with other departments to assure efficient flow of information and materials
    • Assist in training new team members
    • Support, communicate, reinforce and defend the mission, values and culture of the organization

     Secondary Duties and Responsibilities

    • Work from complex wiring and assembly drawings, operation sheets, engineering specifications and sketches and running sheets of significant complexity
    • Modify complex electrical prototypes to correct functional deviations
    • Ensure compliance with all safety and regulatory requirements applicable to the company in accordance with State and Federal regulations and any applicable certification required to maintain the certification

    Apply Now Learn More
  • Assembler

    Location: Largo, FL Base Pay: 19.00 per HOUR

    Largo Company now seeking Experienced Assemblers

     

    Pay: $18-20 hr

     

    Shift: 1st

     

    Job Description

     

    • Perform advanced-leve lassembly functions,which may include:prep,mechanical,harness, cable,printed circuit board sub-assemblies, spray application, and inspection, typically working from models and/or drawings,within Production
    • May perform soldering and installation of components to contract specifications,using a wide range of tools and equipment       
    • Interpret blueprints, Process Flow Instructions and other written or verbal instructions
    • Responsible and accountable for producing quality work to prescribed standards,withafocus on continuous improvement to meet customer commitments onschedule,within budget and to SPC standard practices
    • Must be trained across all assembly stages, work w/Engineering to build 1st articles by interpreting print/specification with no process provided and the ability to interpret/assemble all units in dept
    •  If required, perform all aspects of inspection: in-process, final and source;allocate partial points-3 points in-process-3 points final -4points source

    Apply Now Learn More
  • Quality Inspection Technician

    Location: Largo, FL Base Pay: 19.00 per HOUR

    Largo company now seeking an experienced Quality Inspector

     

    Shift:   1st

     

    Pay:     $18 - 20 hr.

     

    Job Responsibilities

    • Inspect products, components, subassemblies, and/or systems to ensure conformance to requirements
    • Create organizational value by implementing innovative solutions and best practices involved in all processes of the product realization value stream
    • Assist Quality Engineers with identifying non-conforming conditions of products that present existing or impending defective conditions at the system or subsystem level of assembly
    • Assist Quality Engineers prepare inspection plans and checklists for inspection
    • Assist Quality Engineers with data collection and root cause analysis investigations
    • Generate discrepancy notices and initiate Material Review Board actions
    • Perform material movement transactions after completing inspection process
    • May specialize in receiving inspection, in-process inspection, process verification/auditing, final inspection, etc

    Support, communicate, reinforce and defend the mission, values and culture of the organization

     

    Apply Now Learn More
  • Powder Coater

    Location: Clearwater, FL Base Pay: 15.00 per HOUR

    Clearwater Company now seeking an experienced Powder Coater

     

    Pay: 15.00 - $18.00 hr DOE

     

    Shift - 1st

     

    Essential Duties and Responsibilities:

    • Read operational/service manuals and documentation – refer to as needed.
    • Ensure equipment is cleaned, maintained in proper working order.
    • Read and follow instructions for each type of powder, based on manufacturer recommendations.
    • Run the complete daily start up and shut down checklists for the oven, booth and workspace.
    • Maintain the Powder Coating booth and workspace clean and orderly to avoid cross-contamination of colors.
    • Coordinate with Supervisors on work orders and priorities.
    • You are expected to keep up with production demand and request assistance when needed.
    • The goal is to provide quality finishes with minimal waste of material and supplies. You are required to learn, understand and follow all safety rules and instructions associated with the job such as lockout/tagout, emergency response, proper handling of chemicals, oven, spray equipment and PPE.

    Apply Now Learn More
  • CNC Lathe Machinist

    Location: Clearwater, FL Base Pay: 18.00 per HOUR

    CNC Lathe Machine Operator - WEEKENDS ONLY

    Clearwater, FL
     
     
    Job Duties include, but not limited to:
    • Help with the set up the machines
    • Operate machines and troubleshoot when necessary.
    • Inspect complete parts for accuracy
     
     

    Apply Now Learn More
  • Manufacturing Technician II

    Location: Saint Petersburg, FL Base Pay: 17.00 per HOUR

    A Company in St. Petersburg is hiring experienced Manufacturing Technicians II-III

    The Manufacturing Tech facilitates set ups, builds, calibrates tests, process test and breakdown of plasma processing equipment and records results

    Shift - 1st

    Pay -   DOE

    DUTIES AND RESPONSIBILITIES

    • Facilitates equipment applying water, electrical power and leveling machinery in temporary installation
    • Positions and assembles complex Electro/mechanical parts and assemblies part according to blueprints, schematics and/or standard procedures using hand tools
    • Performs complex mechanical alignments and calibration of equipment to the quality standards of ATP (Acceptance Test Procedure) and other procedures that are used during the test cycle of the products
    • Performs and verifies others leak checks on vacuum and mechanical assemblies using leak detection systems
    • The ability to operate and demonstrates the proper usage of impedance meters and other specialized electronic test equipment
    • Debugs equipment, including electrical, RF, mechanical, and vacuum systems, to facilitate power-up and gathering of test data.  Records and reports test data
    • Maintains Class 10,000 through 100 clean room requirements
    • Provides guidance and training for other technicians to the quality standards specified on procedures and the ATP
    • Corresponds and works with Engineering, Planning and other departments on prototype systems.
    • Writes and develops procedures for others technicians to follow
    • Prepares systems for shipment, including cleaning, break down, preparation of miscellaneous list, and interface with Shipping
    • It is every employee’s responsibility to be aware of and adhere to the applicable Safety & Health, Quality and Environmental Process of Plasma-Therm LLC.

     

    Apply Now Learn More
  • TIG Welder

    Location: PINELLAS PARK, FL Base Pay: 17.00 per HOUR

    A Company in Pinellas, FL is seeking an experienced TIG Welder 1st shift - $16-19 hour DOE

    ESSENTIAL DUTIES AND RESPONSIBILITIES

    • Studies and reviews work orders or detailed specifications of work to be performed
    • Reads, interprets, and builds from shop orders, blue prints, and CAD models
    • Sets up and operates all machines such as saws, benders, mills, etc.
    • Fabricates to quality specifications
    • Adheres to all safety policies

     

    Apply Now Learn More
  • Receiving Operator

    Location: Largo, FL Base Pay: 16.00 per HOUR

    Largo company now seeking Receiving Operator

     

    Shift - 1st

     

    Pay -   $16.00

     

    Essential functions

    1. Help with proper material flow from receipt to storage or transfer
    1. Operate necessary PIV equipment including, pallet jacks, slip sheet forklift and reach trucks
    2. Accurately placard incoming inventory 
    3. Unload inbound material and palletize for storage or transfer
    4. Assist quality control with segregating or inspecting materials upon direction
    5. Maintain area neatness and conformance to policies and procedures 
    6. Help with repair of damages cases from incoming shipments as well as other departments. 
    7. Break master cases into smaller case packs and repalletize

    Maintain clean work area free from trash, empty boxes, empty pallets and partial or broken cases

    Apply Now Learn More
  • Lead Operator

    Location: LARGO, FL Base Pay: 16.00 per HOUR

    Largo Company now seeking a Lead Production Operator

     

    Pay -   $16-18 hr

     

    Shift -  1st

     

    Essential Functions

     

    1)     Instruct employees assigned to a line, during a given shift, as to proper work methods and safety procedures.

     1b. Observe, monitor and coordinate the workflow and operational tasks performed by operators during a work shift to establish and reinforce procedures.

     2)     Ensure proper raw materials are staged and areas are clean and neat.

     3)     Inspect product line operations and finished goods to ensure adherence with quality control procedures, proper level and visible appearance of product, correct carton, and labels are being used.

    1. Enter and complete work orders.

     4)     Ensure adequate raw materials are available and alert supervisor of any material needs and required repairs to equipment.

     5)     Operate all roller equipment including peripheral equipment and other related equipment when necessary.

     6)     Train new employees and inspect pre-production line work.

     7)     Ensure operators are maintaining equipment in proper, clean working condition and request maintenance help when needed.

    Apply Now Learn More
  • Operator

    Location: LARGO, FL Base Pay: 15.00 per HOUR

    Largo company now seeking a Production Operator

     

    Shift - 1st

     

    Pay -   $15.00

     

    Job Description

    1. Operate roller equipment in specialty department including peripheral and other related equipment.

     

    1. Retrieve raw material from staging areas and confirm correctness.

     

    1. Set up and make adjustments to machines and inspect pallets and product for damage and reject as necessary.

     

    1. Request maintenance help when needed.

     

    1. Move pallets and distribute in Finished Goods area and scan pallet barcode placards for inventory purposes.

     

    1. Scan work orders and material / labor completions when necessary.

     

    1. Complete basic production log to including line changeovers or QC reports when applicable.

     

    Apply Now Learn More
  • SR Lead Operator

    Location: Largo, FL Base Pay: 16.00 per HOUR

    1. Must be proficient in one or more of the below with the expectation of learning all essential functions:
      1. Lead Order Puller
      2. Lead Make and Ship
      3. Lead Receiving Operator
      4. Distribution Center Foreperson

     Actively displays managerial courage by proactively addressing issues and conflicts; takes ownership for the team and their performance.

    1. Conducts productive start-up meetings that effectively communicate the daily goals and previous shift performance. Solicits team member feedback on missed opportunities and successes.
    2. Demonstrates use of root cause analysis skills – seeks to truly understand the dynamics of the problem, collects the necessary data, develops a solution while involving team members, creates an effective measurement structure to monitor results and makes immediate course corrections, and conducts follow-up inspection to assure adherence.
    3. Manage the implementation of new processes and procedures.
    4. Motivate and encourage new hires and existing team members to improve team member retention.
    5. Collaborate with local plant management, multiple plants, as well as other business partners such as IT on standard operating procedures, corrective actions, and process improvements.
    6. Supports, follows and monitors all safety requirements and provides immediate feedback where necessary.
    7. Train new and current employees, assign tasks, and check work for completeness and accuracy and adherence to departmental standards, practices and standard operating procedures.

    Assumes additional responsibilities and performs special projects as needed or directed.

    Apply Now Learn More

Reviews