Questions? 1-877-404-8449

Branch No: 80131-6299
97 E. Brokaw Road, Suite 120
San Jose, CA 95112
Phone: (669) 261-7026

Available Positions

8 positions available.

Manual Mill / Lathe Machinist

Fremont CA

Base Pay: 19.00 per HOUR

Job Description: Manual Mill / Lathe Machinist Pay rate: $19.00 per hour Shift: Monday- Friday 6 am - 3 pm Location:Fremont, CA setup and run a...

Job Description: Manual Mill / Lathe Machinist

Pay rate: $19.00 per hour

Shift: Monday- Friday 6 am - 3 pm

Location:Fremont, CA

setup and run a manual lathe (Enco, LeBlond) and mill (Bridgeport)

Able to hold close tolerances proficient in the use of inspection tools (calipers, micrometers, etc.) proficient in reading and understanding drawings, layouts or sketches maintain tooling and shop area

Apply Now More Info

Bead Blaster Operator

Fremont CA

Base Pay: 16.00 per HOUR

Job Description: Bead Blaster Operator Pay rate: $15-$16 per hour Shift: 7:30-4:30 pm Location: Fremont, CA A bead blaster is a large machine th...

Job Description: Bead Blaster Operator

Pay rate: $15-$16 per hour

Shift: 7:30-4:30 pm

Location: Fremont, CA

A bead blaster is a large machine that allows the associate to clean all the internal pieces to the ion pump.

This person will be working in the Ion Pump department a few different sections however their primary duties will be bead blasting.

PPE – glasses, apron, dust mask Lifting requirement – up to 50 pounds anything over will be team lift

Temperature will be around 75 – 80 degrees in there while machine is running Closed-toe shoes will be required in both roles.

Apply Now More Info

Maintenance Technician

San Jose CA

Base Pay: 28.00 per HOUR

Maintenance Technician with a solid preventative maintenance background and general plant maintenance experience for the leading company in the pet...

Maintenance Technician with a solid preventative maintenance background and general plant maintenance experience for the leading company in the petroleum wax industry. This is a self-directed position. Experience with pumps, valves, steam boilers, and chilled water systems a plus.

 

General requirements include:

Knowledge and training of steam boilers
Mechanical ability in an array of activities
Safe Work Practices
Easily takes direction
Knowledge in steam / electrical trace
Works closely with production to address immediate plant needs/repairs
Works well independently
Communicates with outside contractors
Able to prioritize projects
All other tasks as assigned

Apply Now More Info

Test Technician

San Jose CA

Base Pay: 20.00 per HOUR

Job Posting: Test Technician Pay rate: 20.00 per hour Shift: 6 am to 2:30 pm, with OT - till 4:30 pm. Monday-Friday Location: San Jose CA KNOWLEDGE...

Job Posting: Test Technician

Pay rate: 20.00 per hour

Shift: 6 am to 2:30 pm, with OT - till 4:30 pm.

Monday-Friday

Location: San Jose CA

KNOWLEDGE AND SKILLS

Ability to effectively communicate information and respond to questions both verbally and in writing.

Good mechanical aptitude, dexterity and hand/eye coordination.

Must be able to reach, bend and lift 35 lbs on a daily basis

Experienced in the use of: DVM’s, Oscilloscope and general test equipment, Experienced PC or MAC user, familiar with: Word, Excel, Windows and/or MAC OS

Must be willing to be trained in other areas of production where the skill level requirements may be lower Knowledge and adherence to safety procedures and programs Exposure to ISO 9000 and cGMP 21 CFR part 820 EDUCATION AND EXPERIENCE 

Associate's degree (A.S.) or equivalent from two-year college or technical school • 3+ years related experience in a high tech, manufacturing environment

Experience working in a medical device manufacturing organization

Experience testing and troubleshooting: laser based optical systems, fluidic systems, digital and analog circuitry • Extensive knowledge of PC’s and networking environments • Experience with Excel 

Strong knowledge of ISO 9000 and cGMP 21 CFR part 820 

Knowledge of LEAN Manufacturing, Six Sigma tools and concepts, Demand Flow Technology (DFT) 

Experience with Oscilloscope

Job Description:

Conducts production testing of assembled flow cytometers and related medical device products.

May integrate systems and conduct a variety of electronic, mechanical, optical, fluidic and electromechanical activities on systems, subassemblies, and parts to ensure unit functions according to specifications.

Will be expected to perform system level and subassembly level troubleshooting to determine root cause, and implement correction of assembly or material defects. Responsible for producing quality products on schedule.

Apply Now More Info

Assembler, Test

San Jose CA

Base Pay: 21.00 per HOUR

Assembler, Test Work Shift: 1st Shift 6 am-230 pm Job Description Summary Conducts production testing of assembled flow cytometers and related medi...

Assembler, Test

Work Shift: 1st Shift 6 am-230 pm

Job Description

Summary Conducts production testing of assembled flow cytometers and related medical device products.

May integrate systems and conduct a variety of electronic, mechanical, optical, fluidic and electromechanical activities on systems, subassemblies, and parts to ensure unit functions according to specifications.

Will be expected to perform system level and subassembly level troubleshooting to determine root cause, and implement correction of assembly or material defects.

Responsible for producing quality products on schedule.

Typically works on assignments that moderately difficult, applies detailed technical knowledge.

Generally receives some instruction, uses independent judgment for most activities and employs a high degree of initiative.

Must be able to work in a team oriented atmosphere with assemblers, technicians, QA personnel, and engineers, completing tasks and communicating effectively, both orally and in writing.

Job Description

Performs instrument optimization functions after final assembly: laser alignment, pressure adjustments, electrical adjustments, etc.

Performs final production testing and inspection to ensure products meet performance specifications and standards.

Analyzes test results on defective units to determine root cause of failure.

Replaces or repairs defective components or assemblies, processes appropriate paperwork, may return unit to assembly for repair.

Compares test results with specifications and records test data and plots test results.

Generates required documentation to complete the Device History Record (DHR)

Analyzes test results on defective units to determine root cause of failure. Frequently requires engineering support to resolve complex and unique problems.

Must be able to read and understand: detailed test instructions, assembly instructions, work orders, test results, Bills of Materials, Standard Operation

Apply Now More Info

Assembler III

San Jose CA

Base Pay: 20.00 per HOUR

 Assembler 3, Instrument Work Shift: 1st Shift 6 am-230 pm Monday-Friday Location: San Jose CA  Performs electro-mechanical assembly of f...

 Assembler 3, Instrument

Work Shift: 1st Shift 6 am-230 pm

Monday-Friday

Location: San Jose CA 

Performs electro-mechanical assembly of flow cytometers, sub-assemblies and related medical device products.

Follows established methods and procedures in performing, assembly of optical, mechanical, fluidic and electronic components and assemblies.

Employs high standards of workmanship to ensure high quality products are produced on schedule.

Typically works on assignments that are routine.

Understands implications of work, and makes recommendations for improvement.

Normally receives instruction on daily work, occasionally uses independent judgment and employs some initiative.

Must be able to work in a team oriented atmosphere with assemblers, technicians, QA personnel, and engineers, completing tasks and communicating effectively, both orally and in writing

Job Description Performs instrument assembly by following released procedures Performs in process inspection to ensure products meet specifications and standards.

Generates required documentation to complete the Device History Record (DHR) May require engineering support to resolve complex and unique problems. Must be able to read and understand: assembly instructions, work orders, Bills of Materials, Standard Operation Procedures, and all other documentation used to control our products and processes.

Confers with engineers, technicians, production personnel, and others regarding assembly procedures.

Expected to provide feedback on production and methods, product design issues, continuously strives to improve product quality and operational efficiency

Will provide support to project teams whose objectives may be: quality improvement, cost reduction, cycle time reduction, reliability improvement, increase operational efficiency, or new product introduction.

Assists in creating and updating process and product documentation. Must have the ability to create and maintain productive

Apply Now More Info

Material Controller

San Jose CA

Base Pay: 17.00 per HOUR

Material Controller Pay Rate:17.00-19.00 hr. Hours 9am to 6pm Monday-Friday Location: San Jose CA Able to work overtime as needed, including Sat...

Material Controller

Pay Rate:17.00-19.00 hr.

Hours 9am to 6pm Monday-Friday

Location: San Jose CA

Able to work overtime as needed, including Saturdays (Weekends).

Shift flexibility. Steel toe required.

Will be operating pallet jacks, stand up forklifts.

Experience is preferred and they will certified and trained.

Some lifting at least 25lbs more on occasion.

Preferred exp: SAP (if not must have some computer literacy, able to catch on quick) Forklift (stand up) Cycle Counting

Inventory Control Required:

Must have high attention to detail Good communication

Counting accuracy Able to hustle and need production needs with locating and pulling parts Will be pushing bins, reaching and bending.

Must be able to meet the Physical aspects and move quickly.

Works on tasks that are complex in nature with minimal supervision.

Process inbound deliveries into stock, including check deliveries of materials and equipment for overage, short, or damage; delivers materials to ordering departments; assists with materials inspection and quarantine as required by current SOPs.

Maintains consumable supply inventory; conducts daily cycle count..

Deliver materials to ordering departments from in-house stock requests or from purchase order receiving.

Maintains warehouse/receiving area in a clean and safe manner.

Maintains daily record of incoming put always and in-house deliveries. Will operate a forklift and company truck. 7.

Participates in all required workplace safety meetings, and remains current in knowledge of SOP’s relating to health and safety.

Apply Now More Info

Shipping Associate

San Jose CA

Base Pay: 17.00 per HOUR

Shipping Associates Pay rate 17.00-19.00 hr Hours 8am to 5pm, Mon-Friday Location San Jose CA     Able to work overtime as needed, incl...

Shipping Associates

Pay rate 17.00-19.00 hr

Hours 8am to 5pm, Mon-Friday

Location San Jose CA

 

 

Able to work overtime as needed, including Saturdays if needed. Steel toe required.

 

Responsible for accurately pulling, packing and shipping of customer orders on time daily.

Intermediate knowledge of international and Domestic Shipping. Performing Cycle Counts, on timely, courteous service to customers.

Inventory and restocking in accordance to the Shipping warehouse strategies.

Knowledge and skills Must have excellent communication and interpersonal skills

Ability to utilize computer systems such as; Excel, Word. Familiar with SAP and or Lotus notes helpful.

Ability to routinely lift up to 35lbs Knowledge of Materials, inventory and warehouse operations.

Education and experience Must have a HS diploma or GED and at least 3 years experience in material distribution (shipping/receiving/inventory control) or equivalent combination of education and exp. Shipping of temperature sensitive products is a plus.

Apply Now More Info

Staff Bios

Chris Machado
Chris Machado Area Director Contact Chris Machado
  • Area Director of Bay Area South (Select San Jose, ResourceMFG San Jose, ResourceMFG Gilroy, Select Salinas)
  • Started with EmployBridge August 2014, four years in the staffing industry
  • Associate’s Degree
  • President’s Club 2015 Winner, Regional Sales Blitz Winner (1st place), Pacific Region Sales Contest (3rd place for highest gross profit generated), Regional Sales Contest (3rd place in new account margin), Company-Wide Sales Contest 2015 Winner (2nd place on new account points, 6th place in total new accounts, rollover bonus), Double-Digit Branch Growth 2015 Winner.
  • Baron’s Sales Training, Sales Certification, Tim Alderman Sales Training, ResourceMFG 101 Safety Certification, Manufacturing Certification
Offline, leave a message
X
Thank you for contacting us. We will reach out to you within the next 24 hours.
An error was encountered and your message was not submitted. Please try again later.
Chat is Currently Offline,
Please leave a message.