Questions? 1-877-404-8449

Branch No: 80012-7412
400 San Fernando Mission Blvd.
1st floor
San Fernando, CA 91340
Phone: (818) 509-2975

Available Positions

8 positions available.

CNC Machinist

Sylmar CA

Base Pay: 24.00 per HOUR

Are you a machinist with a minimal of 3 years of experience in a machine shop environment, looking for a new excellent job opportunity? We are look...

Are you a machinist with a minimal of 3 years of experience in a machine shop environment, looking for a new excellent job opportunity? We are looking for a CNC Machinist to join the team for a performance to hire position for a local company that is a leading contract manufacturer of clinically superior medical devices and advanced manufacturing solutions to the medical device and life sciences industries. Company offers room for advancement and full benefits.

 The Machinist will be responsible for but not limited to:

  • Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T)
  • Setup mills and lathes by following setup instructions with no supervision, including zero and reference points; setting tool registers, offsets compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proofing out machine part program.
  • Verify settings by measuring positions, Inspection of first run part, sample work pieces, helps lead submit first article to QC insuring all customer requirements are met.
  • Maintains specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes.

   If you have the experience, we are looking for then we want you to apply.

 Location: Sylmar

Hours: 2:00 pm – 10:30 pm

Pay: $24 hourly depending on experience

Apply Now More Info

ID Grinder

VAN NUYS CA

Base Pay: 24.00 per HOUR

Do you have a minimal of 1- 2 year experience as a Grinder? We are looking for an experienced Inside Diameter (ID) Grinder to join a local family o...

Do you have a minimal of 1- 2 year experience as a Grinder? We are looking for an experienced Inside Diameter (ID) Grinder to join a local family owned company that has been servicing the Aerospace industry for 50 years and specialized in precision OD GrindingPosition is a performance to hire and company offers great benefits, room for advancement, opportunity to continue education and has a free exercise room on premises.

The grinder will be responsible for:

  • Running ID Grinder using work instructions, blueprints and customer data.
  • Verify that blueprint and applicable attachment provisions match the revisions called out on the Manufacturing Procedure.
  • Operate and Set-Up machines with appropriate tooling and/or fixtures to hold the part.
  • Use inspection equipment to verify conformance of assigned dimensions and finishes.
  • Perform 1st Article set-up inspections to verify part conformity.

If you have the experience we are looking for, then we want you to apply now!

Hours: 7:00 am – 3:30 pm

Location: Van Nuys

Pay: $ 24 hourly

Apply Now More Info

Heated Hose Assembler

Sun Valley CA

Base Pay: 13.25 per HOUR

We are looking for assemblers to join a local company that has pioneered the creation of a wide range of electrically heated products that have bec...

We are looking for assemblers to join a local company that has pioneered the creation of a wide range of electrically heated products that have become indispensable elements in today's world. The assembler will fabricate and assemble heated hoses, and products using an array of tools and equipment. Company will provide some training, but emphasis is on quality, a dedication to performing work accurately, and a keen attention to detail are required. This is a performance to hire position with room for growth.

Assembly task:

  • Spiral wrap an array of materials onto a hose
  • Wind resistance wire on to a hose to a very high tolerance. Manually and with radio assisted control equipment.
  • Light electrical inspections using – Ohm Meters, Hi-pot Tester and Meg Ohm Meter.
  • Assemble Heated Hoses using Engineering written instructions (All Hoses Similar but Different)

 

If you have the experience we are looking for, then apply now.

 Benefits:

  • Medical, Dental and retirement
  • Free online educational courses

Location: Sun Valley

Pay: $13.25

Hours: 6:00 am – 2:30 pm

 

 

Apply Now More Info

Deburr

VAN NUYS CA

Base Pay: 15.00 per HOUR

Do you have a minimum of 2 year of experience as a Deburr Operator? We are looking for a Deburr Operator to join a local family owned company that...

Do you have a minimum of 2 year of experience as a Deburr Operator? We are looking for a Deburr Operator to join a local family owned company that has been servicing the Aerospace industry for 50 years and specializes in precision OD Grinding. Position is performance to hire and company offers great benefits, room for advancement, opportunity to continue education and has a free exercise room on premises.

Some responsibilities and duties are:

  • Follows operation instructions to remove burrs and establish edge breaks, radius, and/or surface finishing that conform to blueprint requirements.
  • Uses power equipment, hand tool, and inspection equipment (calipers, micrometers, microscope)
  • Visually inspects each part for damage and/or corrosion. Tag any discrepant parts immediately
  • Verify that blueprint and applicable attachment provisions match the revisions called out on the Manufacturing Procedures.
  • Set-up machines with appropriate tooling and/or fixture to hold the part.

If you have the experience we are looking for, then apply now!

Hours: 7:00 am – 3:30 pm

Location: Van Nuys

Pay : $15  hourly

 

 

 

 

 

 

 

Apply Now More Info

Forklift Operator

Sun Valley CA

Base Pay: 15.00 per HOUR

Forklift Operator Job Description: • Operate sit down forklift for storage or removal of materials • Prepare products and materials for s...

Forklift Operator

Job Description:

• Operate sit down forklift for storage or removal of materials

• Prepare products and materials for shipment

• Load, unload and stage products and materials

• Track and record units of materials handled

• Adhere to safety policies and procedures

Apply Now More Info

Transitioning Associates

San Fernando CA

Base Pay: Weekly

Transitioning Associates

Transitioning Associates

Apply Now More Info

Electronic Assembler

Sun Valley CA

Base Pay: 16.00 per HOUR

Electronic Assembler needed to assemble electronic equipment for a local company that is an industry leader in providing state-of-the-art solutions...

Electronic Assembler needed to assemble electronic equipment for a local company that is an industry leader in providing state-of-the-art solutions for military power supplies and transformers for national defense and aerospace markets. This is a performance to hire position. Company offers great benefits along with room for growth within the company.

Some job duties are but not limited to:

  • Read and interpret instructions and blueprints, assemble parts and tools, and fit electronic parts together.
  • Solder and be able to safely use hand tools such as heat guns, arbor press and soldering iron.
  •  Perform visual and electrical checks.
  •  Read wiring diagrams, blueprints and bills of material to sub-assemble electronic component

If you have the experience we are looking for, then apply now!

 

Hours: 7:00 am – 3:30 pm

Location: Sun Valley

Pay: $16

Apply Now More Info

Maintenance Mechanic

PACOIMA CA

Base Pay: 23.00 per HOUR

We are looking for a Maintenance Mechanic to join a local company that specializes in the food industry and prides itself on having been a family-o...

We are looking for a Maintenance Mechanic to join a local company that specializes in the food industry and prides itself on having been a family-owned company for over 50 years. This is a performance to hire position with potential for growth within the company. Company is willing to train if you are currently enrolled in a trade school taking Maintenance technician courses. The position requires administrative knowledge of the CAMS maintenance program. All tasks are performed in accordance with GMP and safety guidelines and procedure.

 Some responsibilities and duties are but not limited to:

 

  • Plan and performs maintenance work from start to finish.
  • Must be physically able to use various carpentry, plumbing, electrical, and welding mechanical tools. This position requires a skilled working knowledge of all maintenance crafts and trades with a high degree of skill and knowledge in the performance of at least one craft or trade (i.e. welding, electrical, PLC’s). 
  • Must use equipment such as saws, hammers, drills, paint brushes, rollers or sprayers, and power tools such as grinders, sanders, and electric pipe
  • Responsible for all production equipment and support equipment. 
  • Lead in all technical applications, such as installations of new equipment.
  • Responsible for the overall maintenance of production areas.  Ensures all Production areas and grounds are maintained in a safe and sanitary condition.

If you have the experience we are looking for, apply now!

Hours: 8:00 am – 5:00 pm

Location: Pacoima

Pay: $23

Apply Now More Info

Staff Bios

Sandra Gonzalez
Sandra Gonzalez Area Director Contact Sandra Gonzalez
Rosa Rodriguez
Rosa Rodriguez Personnel Supervisor Contact Rosa Rodriguez
Vince Silberberg
Vince Silberberg Business Development Manager Contact Vince Silberberg
Offline, leave a message
X
 
Thank you!
 

 
Thank you for contacting us. We will reach out to you within the next 24 hours.

An error was encountered and your message was not submitted. Please try again later.
Chat is Currently Offline,
Please leave a message.