Join us on Wednesday, August 21 for Better WorkLife Day, a national hiring event! Click here to read more.

close

Questions? 1-877-404-8449

Branch No: 80005-7389
7061 Clairemont Mesa Blvd.
Suite 219
San Diego, CA 92111
Phone: (858) 597-2923

Available Positions

13 positions available.

Facilities Technician IV

San Diego CA

Base Pay: 33.00 per HOUR

Facilities Technician IV  Job Responsibilities:  Repair or replace defective equipment parts, using hand tools and power tools, and reass...

Facilities Technician IV 

Job Responsibilities: 

Repair or replace defective equipment parts, using hand tools and power tools, and reassemble equipment.

Perform routine preventive facilities to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate.

Inspect drives, motors, and belts, check fluid levels, replace filters, or perform other facilities actions, following checklists.

Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices.

Assemble, install or repair wiring, electrical and electronic components, pipe systems and plumbing, machinery, and equipment.

Inspect, operate, and test machinery and equipment to diagnose machine malfunctions.

Record type and cost of facilities or repair work.

Clean and lubricate shafts, bearings, gears, and other parts of machinery.

Dismantle devices to access and remove defective parts, using hoists, cranes, hand tools, and power tools. 

 

 

Apply Now More Info

Facilities Technician III

San Diego CA

Base Pay: 26.50 per HOUR

 Facilities Technician needed for medical manufacturing company in Mira Mesa! Job Responsibilities: Repair or replace defective equipment part...

 Facilities Technician needed for medical manufacturing company in Mira Mesa!

Job Responsibilities:

Repair or replace defective equipment parts, using hand tools and power tools, and reassemble equipment.

Perform routine preventive facilities to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate.

Inspect drives, motors, and belts, check fluid levels, replace filters, or perform other facilities actions, following checklists.

Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices.

Assemble, install or repair wiring, electrical and electronic components, pipe systems and plumbing, machinery, and equipment.

Inspect, operate, and test machinery and equipment to diagnose machine malfunctions.? Record type and cost of facilities or repair work.

Clean and lubricate shafts, bearings, gears, and other parts of machinery.

Dismantle devices to access and remove defective parts, using hoists, cranes, hand tools, and power tools. 

Apply Now More Info

CNC Machinist

Poway CA

Base Pay: 23.00 per HOUR

***Do you know a CNC Machinist?***Refer one to us and once placed, earn a $500 referral bonus!3rd shift CNC machinist (9:30 PM – 6:00 AM) nee...

***Do you know a CNC Machinist?***
Refer one to us and once placed, earn a $500 referral bonus!
3rd shift CNC machinist (9:30 PM – 6:00 AM) needed! Performance to Hire or Direct Hire options
• Minimum 2 years experience with Haas CNC Mill and/or Lathe
• Experience with a Mori-Seiki is a +.

Apply Now More Info

Machinist - General

SAN DIEGO CA

Base Pay: 26.00 per HOUR

Immediate Machinist positions on 1st shift in Mira Mesa! Responsibilities: Calculate dimensions and tolerances using knowledge of mathematics and i...

Immediate Machinist positions on 1st shift in Mira Mesa!

Responsibilities:

Calculate dimensions and tolerances using knowledge of mathematics and instruments such as micrometers and vernier calipers.

Machine parts to specifications using machine tools such as lathes, milling machines, shapers, or grinders.

Measure, examine, and test complete units in order to detect defects and ensure conformance to specifications using precision instruments such as micrometers.

Set up, adjust, and operate all of the machines tools and many specialized or advanced variation tools in order to perform precision machining operations.

Align and secure holding fixtures, cutting tools, attachments, accessories, and materials onto machines.

Monitor the feed and speed of machines during the machining process.

Study sample parts, blueprints, drawings, and engineering information in order to determine methods and sequences of operations needed to fabricate products, and determine product dimensions and tolerance.

Select the appropriate tools, machines, and materials to be used in preparation of machinery work.

Layout, measure and mark metal stock in order to display placement of cuts. 

 

Apply Now More Info

Deburr Technician

Poway CA

Base Pay: 13.00 per HOUR

Operates assorted automated, semi-automated, and manual equipment or tools to remove burrs (deburring), create countersinks on holes, produce a lin...

Operates assorted automated, semi-automated, and manual equipment or tools to remove burrs (deburring), create countersinks on holes, produce a line-grain finish, tap holes, metal stamp parts, tumble and sandblast parts according to customer specifications, engineering blueprints, and L&T workmanship standards.

Reviews all documents relating to the job at hand (train).

? Operate one or more machines per operation sheet.

? Use appropriate tool as described in process: belt sander, jitterbug and tumblers.

? Remove part from laser machine and help other departments to assemble parts as needed.

? Perform setups based on process sheet and setup documentation (train).

? Keep all work areas clean and organized.

? Daily and weekly maintenance on all machines.

? Report any safety or maintenance concerns to management immediately.

? Technical support or help another team member if necessary under supervision of supervisor.

? Commitment to all safety policies and regulations at all times.

? Other duties may be assigned. Entry level (train).

? Able to learn from reading documentation and measuring tool devices (train).

? Able to load and unload all machines with clear instruction and training.

? Must maintain confidentiality of work related information and materials.

? High school diploma, GED or equivalent work experience.

Apply Now More Info

Assembler

Poway CA

Base Pay: 14.00 per HOUR

Installs various types of hardware (studs, standoffs, nurt-certs, etc.) in or on sheet metal parts and electronic components in accordance with fur...

Installs various types of hardware (studs, standoffs, nurt-certs, etc.) in or on sheet metal parts and electronic components in accordance with furnished blueprints, specifications and L&T workmanship standards.

Reviews all documents relating to the job at hand.

? Load parts, studs, standoffs, nut-certs, bolts, screws, wires, enclosures, etc. on shelf or in car.

? Organize and follow assembly line process.

? Selects appropriate tools, attachments, and methods to obtain required result per blueprint and specifications.

? Perform basic setups based on training, process sheet and setup documentation.

? Performs simple assembly processes and installs hardware.

? Keep all work areas clean and organized.

? Daily and weekly maintenance on all machines.

? Report any safety or maintenance concerns to management immediately. Technical support or help another team member if necessary under supervision of supervisor.

? Commitment to all safety policies and regulations at all times.

? Other duties may be assigned.

Apply Now More Info

CNC Machinist

EL CAJON CA

Base Pay: 23.00 per HOUR

ResourceMFG is currently seeking qualified CNC Machinists. • Seeking 5+ years experience operating a CNC Lathe w/set up and machinist duties.&...

ResourceMFG is currently seeking qualified CNC Machinists.

• Seeking 5+ years experience operating a CNC Lathe w/set up and machinist duties. 
• Seeking 3+ years experience on the Okuma brand CNC machine
• Select and install tooling in tool posts, turrets or indexing heads, and automatic tool change magazine, in sequence specified on process sheet. 
• Machinists perform their own 1st article inspection. 2+ years experience in the following are preferred: 
• CMM 
• Bore-thread gauge 
• Dial calipers 
• OD micrometer 
• ID micrometer 
• Ring/Plug gauges 
• Vernier caliper 
• Experience using WMS/ERP software is a + but not necessary.

***REFERRAL BONUS*** ASK ABOUT OUR $500 REFERRAL BONUS!

 

Apply Now More Info

Machine Operator

San Diego CA

Base Pay: 12.50 per HOUR

Manufacturing Co in Miramar has immediate entry level Operator positions! Great Performance to hire opportunities!  • Minimum 6 months ex...

Manufacturing Co in Miramar has immediate entry level Operator positions!

Great Performance to hire opportunities!

 • Minimum 6 months experience in manufacturing environment

DUTIES/RESPONSIBILITIES

•Responsible for the production of drip tape/hose products in line with production standards.

•Reports machine and material problems to Supervision in a timely manner

•Verifies and maintains proper operating parameters making required adjustments where needed. 

 

Hiring for all shifts below:

1st shift 6:00 am to 6:00 pm - $12.50 / hr

2nd shift 6:00 pm to 6:00 am - $13.75 / hr

Plant operates 24 hours per day/7 days per week.

Candidates must be willing and able to work on the weekends and work OT as needed.

Benefits:

  • Medical, Dental, Vision Benefits, Term Life, Short Term Disability and Retirement Plan
  • Free online career courses available!
  • Weekly pay

Apply Now More Info

Machine Operator

San Diego CA

Base Pay: 12.50 per HOUR

 Currently looking for 2nd shift Entry Level Production Operators! DUTIES/RESPONSIBILITIES • Operates machines under direct supervision....

 Currently looking for 2nd shift Entry Level Production Operators!

DUTIES/RESPONSIBILITIES

• Operates machines under direct supervision.

• Starts stops and feeds the machine and watches for imperfect operations.

• May perform regular visual inspection

• Meet standard production output requirements

 REQUIREMENTS

• High School diploma or equivalent

• Must be able to work weekends • Good verbal and written communication skills • At least one-year experience in manufacturing environment, preferable machine operations experience • Ability to lift up to 50 lbs.

Hiring for all shifts below:

2nd shift 6:00pm to 6:00am

 

Apply Now More Info

Sr. Planner

Poway CA

Base Pay: 28.00 per HOUR

Responsibilities:  Plan and release work orders in ERP system to support the production order action schedule. Schedule and coordinate procur...

Responsibilities: 

  • Plan and release work orders in ERP system to support the production order action schedule. Schedule and coordinate procurement of necessary materials and/or assemblies deliveries to meet production schedules.
  • Status all work order shortages and expedite details to manufacturing daily.
  • Responsible for work order closures, material reconciliation, and material returns to stock.
  • Interpret ECN’s to determine new requirements for materials and correct BOM errors.
  • Communicate problems that will impact production requirements.
  • Responsible for inventory level of materials planned and managed; includes review and disposition of obsolete inventory.

Apply Now More Info

CNC Set up Tech

SAN DIEGO CA

Base Pay: 19.00 per HOUR

A Manufacturer Company in San Diego, CA is looking for a CNC Set Up Technician!   • Experience with trimming plastic. • CNC spe...

A Manufacturer Company in San Diego, CA is looking for a CNC Set Up Technician! 

 • Experience with trimming plastic.

• CNC specific training and accreditation are a plus.

• Minimum of 2 years CNC setup and know how to edit a CNC program.

• Able to operate a CNC machine to perform various machine functions

• Be able to understand and follow the design intent behind a trim fixture.

• Ability to read and interpret blueprints, drawings, and sketches.

• Ability to use measurement gages.

• Able to measure parts for conformance to specification and dimensional requirements.

• Able to set work offsets/ tool offsets. 

• Experience with Solidworks for verification of dimensions as needed.

• Mastercam knowledge a plus.

• Experience setting up and machining plastic and/or wood a plus.

 • Must be able to work weekends. 

Apply Now More Info

Production Operator

SAN DIEGO CA

Base Pay: 12.50 per HOUR

Medical Manufacturing Co in Miramar has immediate Operator positions! Great Performance to hire opportunities!  • Minimum 6 months experi...

Medical Manufacturing Co in Miramar has immediate Operator positions!

Great Performance to hire opportunities!

 • Minimum 6 months experience in manufacturing environment

DUTIES/RESPONSIBILITIES

• Operates simple Thermoforming machines under direct supervision.

• May assist with set up & running of more complex Thermoforming machine with constant supervision.

• Starts stops and feeds the machine and watches for imperfect operations.

• May perform regular visual inspection

Hiring for all shifts below:

1st shift 6am to 2:30pm

2nd shift 2:00pm to 10:30pm

3rd shift 10:00pm to 6:30am

Pay rates: $ 12.00 to $14.50 /hr depending on shift

Benefits:

  • Medical, Dental, Vision Benefits, Term Life, Short Term Disability and Retirement Plan
  • Free online career courses available!
  • Weekly pay

Apply Now More Info

CNC Machinist Tooling

El Cajon CA

Base Pay: 24.00 per HOUR

El Cajon manufacturing company is seeking CNC Tooling Machinists!    The CNC Tooling Machinist is responsible for operating CNC Mills and...

El Cajon manufacturing company is seeking CNC Tooling Machinists!

 

 The CNC Tooling Machinist is responsible for operating CNC Mills and lathes in order to cut tooling. Minimum of 3 years in set up and operation of manual and CNC machines.

  • Set up and Operate all CNC Machines
  • Write basic programs and the machines
  • Proof all programs, make edits as required

 

Benefits:

  • Medical, Dental, Vision Benefits, Term Life, Short Term Disability and Retirement Plan
  • Free online career courses available!
  • Weekly pay

 

Apply Now More Info

Staff Bios

Desenia Collantes Office Administrator Contact Desenia Collantes
Jorgan Gonzalez Branch Manager Contact Jorgan Gonzalez
Tatiana Jimenez Personnel Supervisor Contact Tatiana Jimenez
Offline, leave a message
X
 
Thank you!
 

 
Thank you for contacting us. We will reach out to you within the next 24 hours.

An error was encountered and your message was not submitted. Please try again later.
Chat is Currently Offline,
Please leave a message.