ResourceMFG is seeking a Machine Operator to join our team in Fort Lupton Colo.
Shift: 6:30am - 5:00pm M-F Pay: $20 Per Hour
The Machine Operator will be working in an environment with manufactured structural steel pipe and tube, as well as steel roll-formed profiles. As part of our team, you would be:
If this sounds like you, Apply now! We want to meet you.
This position includes the opportunity to enroll in Medical, Dental, Vision, Term Life, and Short-Term Disability benefits, as well as a Retirement Plan. All Colorado Associates are also entitled to accrue, and use paid sick and safe leave.
Apply Now Learn MoreWe are seeking Machine Operators and Assemblers for ARC Group Worldwide in Firestone!
These are temp to hire opportunities that offer weekly pay and benefits.
NO EXPERIENCE NEEDED!
Machine Operator Shifts available are:
3rd shift: 11:00 pm to 7:00 am Sunday through Thursday, $18.50 per hour
Machine Operator Job Duties -
Other Duties As Assigned
Apply Now Learn MoreResourceMFG is hiring Machine Operators for a temp to hire opportunity in Longmont!
2nd shift M-F 2:45 pm - 11:15 pm
3rd Shift M-F 11:00 pm - 7:00 am
Pay: $17.00 for 2nd shift and $18.00 for 3rd shift
** 2nd shift and 3rd shift position will have training for about 2 weeks from 8:30 am to 5:00 pm.
Apply Now Learn MoreResourceMFG is seeking general laborer's
M-F; 6am - 2:40pm (sometimes OT required until 4:20pm; with occasional SAT)
$17-$18 DOE
General Labor Duties may include stacking, cleaning, prepping, moving materials, inventory assistance, shop support, detailing, grinding, and inspecting. If you are looking to get your foot in the door with Central Valley's number one truck body manufacturer, this can be your beginning. Applicant must be able to lift 50lbs periodically, able to communicate, and work independently as well as under pressure in a fast-paced environment.
General Labor Work Environment
This job operates in a shop production environment. Includes exposure to sounds and noise level that are distracting or uncomfortable. Requires working in a very hot (above 90 degrees F) or very cold (below 32 degrees F) temperatures. Requires working in extremely bright or inadequate lighting conditions. Requires working outdoors, exposed to all weather conditions. Requires working indoors in non-controlled environmental conditions. Job tasks are performed in close physical proximity to other people.
Apply Now Learn More
ResourceMFG are looking for Machine Operators for our client in Fort Lupton, Colo.
Experience in Concrete, Construction or Landscaping are a Huge Plus!
Pay:$20/hr.
Schedule: M-F 5:30am - 5pm Saturday 3x's/month 5:30am-12pm
Under the supervision of the Plant Superintendent, this position supports the plant in all
areas of operating the cuber for production machines and verifies product quality and output
Machine Operator Job Duties
• Learn and understand cubing patterns and block per pallet quantities
• Learn and understand the controls and proper operation of the cuber, splitter and depalleter
• Operate the cuber, splitter and depalleter in a safe manner and report any problems with equipment to
Supervisor or Machine Operator immediately
• During machine downtime, this position is to assist the Machine Operator with problems as needed
• During mold changes, this position is to assist the Machine Operator with such actions
• During machine downtime, ensure your area is clean and the Machine Operator does not need your
assistance, then communicate with the Shift Lead to verify what additional duties are needed
• Must be able to read and use a tape measure
Other Duties as Assigned
If this sounds like you, Apply now! We want to meet you.
Apply Now Learn MoreResourceMFG is seeking a Tool Cri Attendant to join our team in Fort Collins, Co.
Shift: 5:00pm - 3:30am M-F
Pay: $20- $22
The Tool Crib Attendant position oversees management of all CNC Machines tooling needs, thru the virtual management system located within the tooling crib department. Setting up all needed tooling required to keep machines running 24/7. Work with the Shop Floor Managers and Supervisors to support other CNC Machines not connected to the virtual management system.
Tool Crib Attendant Requirements
• Set up CNC Machine tooling according to set up booklets without supervision.
• Change out cutting tools and/or holders correctly and efficiently.
• Correctly measure all tools for correct Radius, Diameter, Flute count, Flute lengths, gauge length, relief length, clearance length and document all.
• Ensure all tooling is checked out of inventory correctly thru the supply pro inventory system.
• Ensure all tooling is placed in the correct CNC machine, correct machine tool magazine pot and correct rotation.
• Ensure the correct tools are removed from machine magazine pot when replacing tooling.
• Ensure all Tooling Holders are maintained clean and in good condition.
• Ensure all equipment within the tooling crib is kept cleaned and organized.
• Attention to detail.
• Ability to adapt to change (positive or negative).
• Ability to communicate information clearly and directly to co-workers and supervisors.
• Ability to accept criticism and deal calmly and effectively with stressful situations.
• Willingness to take on responsibilities and challenges.
Apply Now Learn More
Assistant Project Manager Needed in Fort Collins
$18-22 DOE
1st shift, Monday-Friday
The Assistant Project Manager position helps the Senior Project Manager oversee the introduction and implementation of new products, ensuring products are manufactured on schedule and within quality standards and cost objectives. Work with the Business Development team to promote and sustain a positive work environment of continuous improvement, growth, and profitability.
Assistant Project Manager Duties:
• Ensure that our plans of action will meet our commitments contractually to our customers.
• Learn and use all appropriate modules of our Management Information System (JobBOSS Job Control/ERP Software; MS-Office's Outlook, Excel, Word, etc.)
• Support the Senior Project Manager in key administrative responsibilities
• Provide project management services for new parts
• Attend First Article meetings and report out on findings
• Coordinate requests from external and internal Engineering and Quality departments
• Adhering to the codes of the company’s Quality Management System.
• Continually demonstrate, promote, and be a cheerleader for the company’s Core Values.
• Maintaining a reasonable work environment and providing adequate safeguards for the work-related health and safety of employees. This includes ensuring the area complies with all Federal, state, and local laws and regulations.
• Maintaining confidentiality on all corporate subjects so classified.
• Administering new parts into Manes’ software systems
• Discussing schedule, engineering, and terms and conditions with key customers
• Maintaining status reports for internal and external stakeholders
• Discuss pricing with customers and suppliers
Apply Now Learn MoreResourceMFG is seeking a Engineering Technician to join our team in Fort Collins, Co.
Shift: 6:30am - 5:00pm M-F Pay: $18-$20
The Engineering Technician Job duties entail.
• Learn and use all appropriate modules of our Management Information System (JobBOSS Job, Unipoint; MS-Office's Outlook, Excel, Word, etc.).
• Coordinate with the Manufacturing Engineers to create/modify master planning, compile planning packets for production and distribute to shop.
• Help develop planning using ERP system for machined parts and assemblies based on customer’s design requirements.
• Analyze blueprint details, corresponding flag notes, and appropriate engineering specifications to determine appropriate information needed to create/modify the fabrication planning.
• Research all customer requirements from customer digital product definitions, then develop and implement fabrication planning accordingly.
• Coordinate with the Manufacturing Engineers and manufacturing personnel to perform and document time and tool studies to support engineering estimates and quotes.
• Work with other engineers to support the customer - design new solutions or improve existing programs.
• Develop, implement and document improvements to the manufacturing processes in order to eliminate waste.
• Suggests improvements for manufacturability, improved quality and cost savings.
STOP! READ ME!
3rd Shift Direct Hire Opportunity In Mead Colorado!
CHEMICAL MANUFACTURING OPERATOR
3rd Shift-Pay for this role is $25.00 hourly, with a $4.00 hourly shift differential.
Work schedule is Monday night to Saturday morning, 9:45pm - 6:15am.
The Pilot Plant Operator follows established procedures to manufacture chemical intermediates and finished products. The Operator follows procedures that are set forth in the form of batch records, GEN’s, and work instructions.
This person completes a variety of duties: in addition to operating chemical processes, the employee may perform setup, cleaning of equipment, waste disposal, emergency response, warehouse activities, maintenance, and clean-up activities needed to facilitate general operations and regulatory compliance.
Operators are given extensive safety and Operator-specific training before they are assigned process work. After the initial training period, Pilot Plant employees work their assigned 8-hour shifts Monday through Friday. Operators are occasionally required to work overtime and/or weekends when the Pilot Plant production schedule requires it. Operators may be required to temporarily work an alternate shift when the Pilot Plant production schedule requires it.
Chemical Operator Job Responsibilities
Industrial Electrician Needed for our Client in Mead
Direct Hire Placement!
Industrial Electrician - $30 - $38/hour
The Electrician’s primary responsibility is to perform the overall maintenance of Electrical and Instrumentation systems at the Mead and Specialty Place facilities.
Industrial Electrician Job Responsibilities
ResourceMFG is seeking Chemical Manufacturing Operators for company in Frederick and Mead
Direct Hire opportunity!!
Rotating Schedule. - Must be able to work Days and Night Shift
12-hour shifts with alternating days off, and rotate between night and day shifts every 12 weeks
Pay for this role is $25.00 hourly plus $4.00 for shift differential when on night rotation
Chemical Manufacturing Operator follows established procedures to manufacture chemical intermediates and finished products. The Operator follows procedures that are set forth in the form of batch records and work instructions. This person completes a variety of duties: in addition to operating chemical processes, the employee may perform setup, cleaning of equipment, waste disposal, emergency response, warehouse activities, maintenance, and clean-up activities needed to facilitate general operations and regulatory compliance.
Chemical Manufacturing Operator Duties:
Apply TODAY!
ResourceMFG is looking for an Automotive Wiring Tech in La Salle, CO. at a local truck body shop.
Shift: 1st Shift
Pay: $21/hr
The Automotive Wiring Tech positions are responsible for installing electrical accessories or components for up-fitting truck bodies, such as beacon lights, strobe lights, relays, trailer plugs, cranes, dump trucks, break controllers, and compressors. They will assemble and wire electrical parts following schematic drawing by using hand, machine and/or power tools. They will inspect electrical or electronic systems for defect and do electronic diagnostics.
•Install various switches and relays
•Install trailer plugs, cranes / auxiliary batteries, dump trucks, compressors
•Install Brake Controllers (standard, electrical, or air brake systems)
•Pneumatic Systems and Electrical
•Use overhead cranes to lift parts, units, motors, generators, or subassemblies.
•Disassemble and reassemble equipment dashes for installation
•Seal gaps or cracks to prevent leakage or moisture intrusion.
Does this Automotive Wiring Tech position Fit For You? Apply Today!
This position includes the opportunity to enroll in Medical, Dental, Vision, Term Life, and Short-Term Disability benefits, as well as a Retirement Plan. All Colorado Associates are also entitled to accrue and use paid sick and safe leave.
Apply Now Learn MoreResourceMFG is seeking 2nd shift Machine Operators for an electronics manufacturing company in Longmont. This company specializes in contract manufacturing of Printed Circuit Boards. This is a long term temp to hire position.
You will be be trained on how to operate the machine you will be operating, so if you any type of machine operating experience, we want to speak with you!
$17-23 Depending on level of experience
Utilize SMT machines to place surface mount parts and solder reflow the devices to the printed circuit board.
Responsible for the set-up of all pieces of equipment on the SMT line, including the screen printer, the pick and place machines and the reflow oven.
Duties and Responsibilities:
• Utilize process sheets to ensure correct build of product.
• Load feeders for surface mount machines using the load list provided by machine.
• Verify correct part numbers being used for the specific job being run.
• Initiate and select correct programs for SMT screen printer & SMT pick and place machines and correct reflow profile for the reflow oven.
• Select the proper stencil screen for use during screen printing operation.
• Comply with company's standards of ESD, IPC-A-610, work instructions and ISO procedures and policies.
Apply Now Learn More
ResourceMFG is looking for a Code Welder a company in Evans, CO. The role is starting right away for a great candidate.
Day Shift- Monday through Friday 7am to 5pm
Pay: $25.hr
Code Welder Duties:
Plans layouts and assembles and installs metal parts, equipment, and products according to company specifications and blue prints.
Position requires a wide range of welding skills including light tacking to heavy flat, up weld, and overhead weld according to ASME Codes. Operate a variety of power tools including, but not limited to saws, grinders, drills, welders, and overhead cranes. Must be able to comply with company safety policies, keep work area clean, and possess the ability to perform each essential duty satisfactory. Other related duties as assigned.
Must take and pass welding test. See job requirements for details.
If this sounds like you, Apply now! We want to meet you.
This position includes the opportunity to enroll in Medical, Dental, Vision, Term Life, and Short-Term Disability benefits, as well as a Retirement Plan. All Colorado Associates are also entitled to accrue, and use paid sick and safe leave.
Production Assembly Positions Available in Cheyenne!
1st shift: 7:30 am to 4:00 pm Monday through Friday
Pay: $16.00 per hour
Assembly roles with varied stations, changing to keep you having fun, and engaged while working. Never bored and the days fly by. Production-quick paced environment.
Other Duties as Assigned
Apply Now Learn MoreResourceMFG is looking for a MIG Welder in La Salle, Colorado!
Pay: $20/hour
Shift: Mon-Fri 6am to 2:30pm with occasional Saturday work
The MIG Welder position requires the candidates to fit, weld, and fabricate as needed to mount bodies as per specs. Candidate must also inspect completed work to make sure bodies are fitted properly, and make sure all the proper documentations and weight certification stickers are made for the unit.
If you are a MIG Welder, Apply now! We want to meet you.
This position includes the opportunity to enroll in Medical, Dental, Vision, Term Life, and Short-Term Disability benefits, as well as a Retirement Plan. All Colorado Associates are also entitled to accrue, and use paid sick and safe leave.
Apply Now Learn More