*Must be able to train on 1st shift 6a-230p at $16 an hour for 6-8 weeks*
Specific Duties and Responsibilities:
*Must be able to train on 1st shift 6a-230p at $16 an hour for 6-8 weeks*
Apply Now Learn More
General Information
POSITION SUMMARY:
Perform a wide range of electrical and mechanical operations associated with the maintenance, repair, set-up and adjustment of all types of department machines, equipment, support equipment, and environmental waste handling.
ESSENTIAL FUNCTIONS:
· Maintain thorough working, set-up and operating knowledge of machines and processes. Remove, replace, and adjust all mechanical parts and units.
· Mentally and visually pay attention to defective material or improper seating of parts in fixtures, and making corrections utilizing standard operating procedures as needed.
· Diagnose equipment trouble and determine extent of repairs necessary.
· Using a systems approach, troubleshoot equipment, linking mechanical functions to electrical drive and inspection devices.
· Tighten or repair low voltage wiring on machine and peripheral equipment.
· Use special height gages, dial indicators and checking devices to ensure accurate heights and run parts to very close tolerances.
· Demonstrate good written and verbal communication skills to explain problems, to train others in the department and to maintain records of maintenance performed on each machine.
· Be able to move (push, pull, or otherwise manipulate) materials up to 75lbs. and be capable of bending and stretching.
· Work on new or altered machines or equipment and make necessary corrections or alterations to ready the same for production.
· During electrical equipment failure, determine type of malfunction such as sensor optic or input/output signal and adjust.
· Follow an established preventive maintenance schedule and perform a complete check out on each machine, as required.
· Clear misloaded parts as necessary to ensure a constant flow of parts along tracks to fixtures. Report unusual conditions to proper supervision.
· Maintain work areas in a clean and orderly condition.
· May require work with Tool Room and may occasionally require the fabrication of certain machine parts.
· Use proper PPE while handling hazardous waste associated with the manufacturing process which includes but not limited to; DOT Labeling, correct container selection, storage procedures, waste manifests, etc…
· Knowledge of National Electric Code.
· Mathematical skills with knowledge to apply mathematical calculations to analyze basic circuit loads.
· Knowledge of discrete inputs and outputs in relation to a PLC. Knowledge of analog (4-20ma, 0-5V, 0-10V) inputs and outputs in relation to a PLC. Difference between sourcing and sinking inputs and outputs in relation to a PLC.
Entry-Level Manufacturing Positions
Temp-To-Hire - Day shift and Night Shift Available (3 to 4 day work week)
Location: Forks of the River
Pay Rates up to $16.50
$300 *sign-on bonus available after hire
(*see branch for details)
A personal care product company is currently seeking manufacturing associates to work in quality control and operate machines. Previous experience is a plus but not required for these amazing temp-to-hire opportunities! Candidates should poses strong attention to detail, solid attendance, be willing to learn and adapt to all aspects of the job, be a team player!
Apply Now Learn MoreQuick Hire Opportunities in Forks of the River
Interview with ResourceMFG, Start directly with the company
2-2-3 Schedule on Day and Nights Available
7am-7pm, 7pm-7am
Pay Rates between $16.50-$17.25
Associates currently needed with local personal care products facility. Clean, climate-controlled, team-work based environment.
Quality Inspect:
Machine Operator:
3rd shift General Production worker needed.
located in Forks of the River Industrial area
12 hour shift- 5:00 pm-5:00 am (1-2 week training on Day shift 9am-5pm)
on a 2,2,3 rotating schedule (only 15 days a month!)
Duties include shipping, receiving, stocking and loading warehouse inventory daily. Counting and documenting inventory on a rotating basis to ensure accurate inventory records. Position will involve lifting (up to 50lbs) and standing for long periods of time.
Great benefits of working with Resource MFG
We pay every week
We have medical, Rx, and dental benefits
Free courses with certifications for resume enhancement.
Apply Now Learn More1st shift General Production worker needed.
located in Forks of the River Industrial area
12 hour shift- 5:00 am-5:00 pm
on a 2,2,3 rotating schedule (only 15 days a month!)
Duties include shipping, receiving, stocking and loading warehouse inventory daily. Counting and documenting inventory on a rotating basis to ensure accurate inventory records. Position will involve lifting (up to 50lbs) and standing for long periods of time.
Great benefits of working with Resource MFG
We pay every week
We have medical, Rx, and dental benefits
Free courses with certifications for resume enhancement.
Apply Now Learn MoreGeneral Warehouse worker needed for night shift in Forks of the River area
Monday- Friday
5:00pm-2:00am
$17.60 per hour
Main duties will include loading carts and palletizing. All candidates are required to train on Day Shift (8A - 4P) for one week before moving to night shift for computer training.
Benefits or working with Resource MFG
Paid weekly
Medical, Rx, and Dental benefits available
Free Online Courses with certifications.
Apply Now Learn MoreFork lift Operator/Material Handler needed in Forks of the River Area
$17 per hour
Monday- Friday
8:00 am - 4:30 pm
Local medical supply company is looking for an experienced Forklift Operator/Material Handler to stock product and shuttle throughout the building. This is not strictly a forklift position, equipment used - Fork lift, Clamp Truck, Reach Truck, Stock picker, as well as manually moving the product.
Main job responsibilities will be order selecting, wrapping and staging pallets, general warehouse cleaning.
Benefits of working with Resource MFG
Forklift position available in Forks of the River Area.
3rd shift -rotating schedule (2,2,3) 15 days a month, every other weekend off!
5:30pm-5:30am
$18.70 per hour
Must be able to train day shift 8am-5pm for a week or 2
Local medical supply distribution company looking for experienced forklift operators to stock product and shuttle products between departments. In addition there will be some material handling and other warehouse duties as needed.
Benefits of working with Resource MFG:
paid weekly
free Online course
Medical, Rx, dental benefits available
Apply Now Learn More
3:00pm- 11:30 pm
Local medical supply distribution company looking for experienced forklift operators to stock product and shuttle products between departments. In addition there will be some material handling and other warehouse duties as needed.
Benefits:
paid weekly
free Online course
Medical, Rx, dental benefits available
Apply Now Learn MoreExperienced Die Setter/Press Operator Technician needed in South East Knoxville.
6:00am-2:30pm plus overtime potential
$20.31 per hour
Monday-Friday (Some overtime on Saturday)
Metal manufacturer is looking for an experienced technician as a die setter or press machine operator to perform successful set-up of metal stamping dies. This candidate must understand mechanics and functions of a metal stamp press, experience in operating an overhead crane and tow motor, and maintain excellent safety, quality and attendance record.
Benefits of working with Resource MFG:
Paid weekly
Medical, Rx, and Dental insurance available
Free online courses with certifications.
Apply Now Learn MoreWest Knoxville Forklift Operator Position
Shift Information: 7am-5pm Monday-Friday
Pay Rate: $15 an hour
Location: West Knoxville
Growth opportunities available
Primary job functions/skills required
Apply Now Learn More
Te gustaría trabajar sólo 15 días al mes y que te paguen 40 horas cada semana?
Necesitamos empacadores para trabajar de inmediato.
Sobre tiempo voluntario
Bonos de asistencia cada semana ($25)
Bonos de Referencia ilimitados ($200)
Luch break pago
Área - Forks of the River (Sureste de Knoxville).
Se necesitan personas que posean buena actitud y mantengan buena asistencia para trabajar como empacadores en el turno de día y de noche (hoarios de 12 horas). Se trabaja los fines de semana dos veces al mes. Experiencia no es requerida. Los asociados deberán aprender todos los aspectos de la posición y deberán estar abiertos a críticas constructivas.
Apply Now Learn More