All 2017 W2s will be sent by 1/31/2018 to the address on file as of 12/31/2017.

close

Questions? 1-877-404-8449

Branch No: 81315
2426 N Herritage Street
Kinston, NC 28501
Phone: (252) 208-0072

Available Positions

18 positions available.

Food Service-Butterball

Mount Olive NC

Base Pay: 8.75

Location-Mount Olive Time- can vary and will be called  when needed, shifts are 1st, 2nd and 3rd Prep and serve food Clean up station and take...

Location-Mount Olive

Time- can vary and will be called  when needed, shifts are 1st, 2nd and 3rd

Prep and serve food

Clean up station and take care of leftover food

Stock inventory appropriately

Maintain a positive and professional approach with coworkers and customers

General clean up

Apply Now More Info

Warehouse Associate

Kinston NC

Base Pay: 11.00

ResourceMFG has immediate openings for warehouse associates. Candidate must be able to unload containers by hand. Lifting up to 50 lbs. Fast paced...

ResourceMFG has immediate openings for warehouse associates. Candidate must be able to unload containers by hand. Lifting up to 50 lbs. Fast paced environment.

Apply Now More Info

Glass Cutter

KINSTON NC

Base Pay: 10.13

ResouceMFG has an opening for a GLASS CUTTER. A glass cutter cuts glass using glass cutting equipment. Glass cutter will program and schedule into...

ResouceMFG has an opening for a GLASS CUTTER. A glass cutter cuts glass using glass cutting equipment. Glass cutter will program and schedule into cutting software and will load glass onto table to be cut. After the cutting operation, employee will need to break out and slot all cut glass to label and tag completed carts. Employee will perform process and quality checks hourly. Must be able to fully understand and read a tape measure.

2nd shift position 

Apply Now More Info

Glass Cutter

KINSTON NC

Base Pay: 10.13

ResouceMFG has an opening for a GLASS CUTTER. A glass cutter cuts glass using glass cutting equipment. Glass cutter will program schedule into cutt...

ResouceMFG has an opening for a GLASS CUTTER. A glass cutter cuts glass using glass cutting equipment. Glass cutter will program schedule into cutting software and will load glass onto table to be cut. After the cutting operation, employee will need to break out and slot all cut glass to label and tag completed carts. Employee will perform process and quality checks hourly. Must be able to fully understand and read a tape measure.

1st shift position - able to read/understand tape measure

Apply Now More Info

Hardware

KINSTON NC

Base Pay: 9.23

ResourceMFG has an opening for a HARDWARE installer. The Hardware secures locks and keepers on the sash. Hardware will need to read production stic...

ResourceMFG has an opening for a HARDWARE installer. The Hardware secures locks and keepers on the sash. Hardware will need to read production stickers to determine the correct lock and keeper. Tape measure will be used to insure parts are correct length.

1st shift position 

Apply Now More Info

Muller

KINSTON NC

Base Pay: 9.23

ResourceMFG has an opening for a MULLER. The Muller position installs mullion plate to attach windows together, may also be required to add finishi...

ResourceMFG has an opening for a MULLER. The Muller position installs mullion plate to attach windows together, may also be required to add finishing pieces to unit to complete.

2nd shift position 

Apply Now More Info

Balancer

KINSTON NC

Base Pay: 9.23

ResourceMFG has an opening for a BALANCER. The Balancer checks processing ticket and installs balance to be installed in window. 2nd shift position

ResourceMFG has an opening for a BALANCER. The Balancer checks processing ticket and installs balance to be installed in window.

2nd shift position

Apply Now More Info

Assembly

KINSTON NC

Base Pay: 10.51

ResourceMFG has immediate openings for Assembly positions.  • Preparing work to be accomplished by studying assembly instructions, bluepr...

ResourceMFG has immediate openings for Assembly positions. 

• Preparing work to be accomplished by studying assembly instructions, blueprint specifications, and parts lists; gathering parts, subassemblies, tools, and materials.

• Positioning parts and subassemblies by using templates or reading measurements and small hand tools

• Assembling components by examining connections for correct fit; fastening parts and subassemblies.

• Verifying specifications by measuring completed component.

• Resolving assembly problems by altering dimensions to meet specifications; notifying supervisor to obtain additional resources.

• Keeping equipment operational by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs.

• Maintaining safe and clean working environment by complying with procedures, rules, and regulations.

• Conserving resources by using equipment and supplies as needed to accomplish job results. • Contributing to team effort by accomplishing related results as needed.

Apply Now More Info

Window Inspector

KINSTON NC

Base Pay: 10.58

ResourceMFG has an opening for an END-OF-LINE INSPECTOR (EOL). An EOL inspector inspects finished product for imperfections, verifies accuracy of h...

ResourceMFG has an opening for an END-OF-LINE INSPECTOR (EOL). An EOL inspector inspects finished product for imperfections, verifies accuracy of hardware used, correct color, size, style, model, glass, grids, labels… will install correct labels. Inspectors will accept or reject product based on inspection.

1st shift position

Apply Now More Info

ASME Welder

Goldsboro NC

Base Pay: 18.00

ResourceMFG has positions in Goldsboro for ASME Welders.  These are long-term temporary positions. ASME Welders General Summary: This positio...

ResourceMFG has positions in Goldsboro for ASME Welders.  These are long-term temporary positions.

ASME Welders General Summary:

  • This position is accountable for welding and/or fabricating components according to work specifications to cost effectively produce a high-quality product in a safe manner, on a timely basis that meets customer requirements.
  • Primary Job Responsibilities include but are not limited to:
  • Weld all pressure vessels in accordance with ASME Code requirements and all units with radiography as part of the customer specifications.
  • Lay out and weld to specification all products; code or non-code, standard or non-standard.
  • Produce a quality product that meets customer and design specifications while minimizing scrap and rework costs.
  • Learn, know and adhere to the Inspection Documentation requirements including applicable traceability and tracking logs.
  • Perform operations within time standards.
  • Support other team members with their duties to ensure the smooth operation of the department in support of team and divisional goals.
  • Monitor inventory levels and locations, and work with support staff to ensure the availability of inventory needed to produce goods on schedule and according to customer requirements.
  • Adhere to processes and procedures on a continual basis to ensure departmental goals are being met related to efficiencies, equipment utilization and time usage in order to maintain or improve cost competitiveness.
  • Provide quality in all goods and services delivered to internal and external customers through thorough planning, responsible implementation on provided schedule, and continuous improvement.
  • Follow and continually monitor established safety procedures to assure a clean, safe work environment is promoted and maintained.
  • Attend and actively listen/participate at required communication meetings.
  • Complete all required training, including safety training, quality training and

Apply Now More Info

Frame Cleaner

KINSTON NC

Base Pay: 9.45

ResourceMFG has an opening for a FRAME CLEANER. Frame cleaner operator determines type of frame by reading production labels. Operator sets cleaner...

ResourceMFG has an opening for a FRAME CLEANER. Frame cleaner operator determines type of frame by reading production labels. Operator sets cleaner to correct part, style and positions frame into the cleaner. Frame Cleaner operator will check all four frame corners to insure they have been cleaned properly and will remove cleaned part and send down the line.

1st shift position 

Apply Now More Info

Floater

KINSTON NC

Base Pay: 10.13

ResourceMFG has an opening for a SC FLOATER. The SC Floater moves to different positions within the Screen Dept. to accommodate the needs of the de...

ResourceMFG has an opening for a SC FLOATER. The SC Floater moves to different positions within the Screen Dept. to accommodate the needs of the department due to various reasons. A SC Floater needs to be quick learner as this position requires to train on different positions as needed.

1st shift position

Apply Now More Info

Cart Cleaner

KINSTON NC

Base Pay: 9.23

ResourceMFG has an opening for a Cart Cleaner. The Cart Cleaner cleans excess and broken glass from glass carts. Cart Cleaner will pull c...

ResourceMFG has an opening for a Cart Cleaner. The Cart Cleaner cleans excess and broken glass from glass carts. Cart Cleaner will pull carts to and from the lines and deliver carts to the correct location.

1st shift position

Apply Now More Info

Maintenance

Kinston NC

Base Pay: 17.00

ResourceMFG has a Facilities Maintenance position available in Kinston, NC with a well-established manufacturer. This position is a temp-to-hire po...

ResourceMFG has a Facilities Maintenance position available in Kinston, NC with a well-established manufacturer.

This position is a temp-to-hire position for the right candidate. Starting Pay ($17/hr or commensurate with experience).

Skills:

  • basic math
  • attention to detail
  • able to follow directions
  • maintain maintenance records
  • basic electrical and plumbing understanding
  • additional engineering or solid mechanical background required

Apply Now More Info

Food Ser-Greenville-Corp

Greenville NC

Base Pay: 9.25

Grill cook needed 1st shift (6am to 2:00pm) in the Greenville area Working in cafeteria, serving, prepping foods, general cleaning and putting up s...

Grill cook needed

1st shift (6am to 2:00pm) in the Greenville area

Working in cafeteria, serving, prepping foods, general cleaning and putting up stock.

Must be able to lift up to 30 pounds.

 Ensure that food comes out in high quality and in a timely fashion

Maintain a positive and professional approach with coworkers and customers

Apply Now More Info

Machinist

Goldsboro NC

Base Pay: TBD

Sets up and operates conventional, special-purpose and numerical control (NC) machines and machining centers to fabricate metallic and nonmetallic...

Sets up and operates conventional, special-purpose and numerical control (NC) machines and machining centers to fabricate metallic and nonmetallic parts, and fits and assembles machines parts into complete units,

Apply Now More Info

Quality Tech/Lab

Kinston NC

Base Pay: 13.08

Temp to Perm position Looking for 2nd shift Quality Tech! 12 hour shift, rotating days! Location: Kinston Job duties include: Test product samples...

Temp to Perm position

Looking for 2nd shift Quality Tech! 12 hour shift, rotating days!

Location: Kinston

Job duties include: Test product samples to insure compliance with quality standards Perform repetitive lab tests to verify physical and chemical characteristics of fiber and yarn products Compile and maintain records of lab activity Utilize mathematical and statistical analysis to prepare quality reports Complete shipping request forms Independent operation of the lab during 12 hour shift which is on rotating days.

Apply Now More Info

Creeler

Kinston NC

Base Pay: 10.00

This is a temp to permanent position!! Opportunity for advancement!!! Looking for a few good people! Must be able to work everyday with a positive...

This is a temp to permanent position!! Opportunity for advancement!!!

Looking for a few good people!

Must be able to work everyday with a positive attitude and be a team player!!

12 hour shifts with rotating days.

It is essential to be able to climb stairs with product weighing up to 40 pounds place on a peg, stand on your feet for 12 hour shifts and have the ability to use basic math skills for production issues. Training will be provided

Apply Now More Info
Kinston new.jpg

Staff Bios

Kathry Crawford
Kathry Crawford Operations Manager Contact Kathry Crawford
  • 23 years with the company, 20 years in HR - Manufacturing
  • Barton College
  • ResourceMFG Certification, ProLogistix Certification, Safety Certifications
Linda Dickerson On-Site Administrator Contact Linda Dickerson
Frankie Foster
Frankie Foster Branch Manager Contact Frankie Foster
  • Two years with the company, 29 years in staffing industry
  • Past Chairman of Board – Pitt Greenville Chamber of Commerce; Board President – United Way of Pitt County; Co-Chairman – Children’s Miracle Network Telethan, Vidant Hospital; Vice-Chair, Women in Business, Smithfield Chamber of Commerce
Jason Gibson On-Site Coordinator Contact Jason Gibson
Livia Hernandez
Livia Hernandez Office Administrator Contact Livia Hernandez
Dawn Manning
Dawn Manning Staffing Supervisor Contact Dawn Manning
  • Two years with ResourceMFG, 18 years in the staffing industry 
  • Human Resources, Recruiting, Employee Relations, Client Relations, Employee Retention, and Vendor Management
James Moreno On-Site Supervisor Contact James Moreno
Rachel Padgett-Mashburn
Rachel Padgett-Mashburn Staffing Supervisor Contact Rachel Padgett-Mashburn
  • Five years with the company
  • Recruiting, Employee Relations, Client Relations, Employee Retention
  • President’s Club
Cynthia Stearns Regional Manager Contact Cynthia Stearns
Pat Walters
Pat Walters On-Site Manager Contact Pat Walters
  • 15 years on-site manger, two years safety specialist, 20 years manufacturing/warehouse management
  • Education-Richmond Community College