2018 W-2s will be mailed to associates on January 31, 2019 to the home address on file as of January 4, 2019. Click here to read more.

close

Questions? 1-877-404-8449

Branch No: 20026-7344
14 Brozzini Ct, Ste C1
Greenville, SC 29607
Phone: (864) 370-0606

Available Positions

10 positions available.

3rd Machine Operator

Duncan SC

Base Pay: 14.50 per HOUR

GO FULL TIME WITHING 30-60 DAYS INSIDE OF CLIMATE CONTROLLED FACILITY!! Machine Operator/Duncan/3rd/ $14.50/ Resource MFG is hiring multiple machin...

GO FULL TIME WITHING 30-60 DAYS INSIDE OF CLIMATE CONTROLLED FACILITY!!

Machine Operator/Duncan/3rd/ $14.50/

Resource MFG is hiring multiple machine operators for one of our growing company located in Duncan, Sc. These jobs are temp-to-hire in a clean, air conditioned and heated facility.

Hours:

*11:30 pm - 7:30 am

*Monday through Friday

*Must be willing and able to work overtime when require, including weekends* 

ResourceMFG offers all employees:

*Weekly pay!

*Direct deposit!

*Health benefits!

*Referral bonuses!

*FREE ONLINE COURSES

Apply Now More Info

3rd Assembler

Spartanburg SC

Base Pay: 13.50 per HOUR

FREE ONLINE COLLEGE COURSE AVAILABLE THROUGH OUR BETTER WORK LIFE ACADEMY!! ResourceMFG has machine operator jobs in Spartanburg, SC. These jobs ar...

FREE ONLINE COLLEGE COURSE AVAILABLE THROUGH OUR BETTER WORK LIFE ACADEMY!!

ResourceMFG has machine operator jobs in Spartanburg, SC.

These jobs are temp-to-hire in a clean, air conditioned and heated facility.

Hours:

*10:30pm-6:30am

*Able to work overtime, including weekends.

Pay:

*$13.50/hour to start

*Time & a half overtime 

*After hire on, raise reviews will be held every six months!

 

Apply Now More Info

1st Machine Operator

Spartanburg SC

Base Pay: 13.00 per HOUR

1st SHIFT START THIS WEEK!! ResourceMFG has machine operator jobs in Spartanburg, SC. These jobs are temp-to-hire in a clean, air conditioned and h...

1st SHIFT START THIS WEEK!!

ResourceMFG has machine operator jobs in Spartanburg, SC. These jobs are temp-to-hire in a clean, air conditioned and heated facility.

Requirements:

*6 + months experience

* Ability to lift up to 50lbs

*Team oriented

Hours:

*630am-3:00pm *

Must be able to work Overtime

Pay:

*$13.00/hour to start

*Time & a half overtime

*After hire on, raise reviews will be held every six months! 

Apply Now More Info

Chemical Operator

Inman SC

Base Pay: 15.50 per HOUR

Resource MFG is looking to hire Chemical Operators for a Worldwide leader in chemical research and development. Applicants must be willing to work...

Resource MFG is looking to hire Chemical Operators for a Worldwide leader in chemical research and development. Applicants must be willing to work a rotating 12 hour shift schedule.

Pay:
$15.50 per hour

Hours:
12 hour swing shifts
4 days on 7a-7p - 4 days off - 4 nights on 7p-7a

Job Requirements:
*High school Diploma or GED required
*Strong attention to detail.
*Strong math skills
*Must pass annual physical requirement associated with material handling and PPE usage.
*Must be able to lift 50 lbs.

Apply Now More Info

CNC Lathe Set-up

Greer SC

Base Pay: 17.00 per HOUR

Resource MFG is hiring CNC Lathe Machinists for Tuffaloy Products in Greer, SC. Shift: 2nd Shift 4:00pm - 2:00am Pay: $15.00 - $17.00 Depending Upo...

Resource MFG is hiring CNC Lathe Machinists for Tuffaloy Products in Greer, SC.

Shift: 2nd Shift 4:00pm - 2:00am

Pay: $15.00 - $17.00 Depending Upon Experience

Position Summary:
Primary responsibilities of this position will be to operate multi spindle bar fed mill turn CNC lathes to produce parts safely and within specification. Operators will learn to program with M & G codes, fully set up, and operate the CNC machines. The successful candidate for this position will have a solid work ethic and posses a can do attitude with a willingness to learn. This position reports to the Manufacturing Supervisor. Details of the position include:

• Produce parts to engineering drawings in spec and required quality levels.
o Load existing program or edit M & G codes to successfully produce parts
o Set up CNC lathe to run required parts
o Dry run part in single block mode to insure program is correct
o Produce first article inspection part and document dimensions for ISO
o Operate machine in a safe and efficient manner
o Produce parts in spec at expected efficiency levels
o Insure part specifications are met utilizing micrometers, calipers and gages
o Capture time on the job in the labor collection system for job costing
• Perform routine machine maintenance prior to each shift
o Insure all oils, lubricants and coolant tanks are full
o Run warm up programs to warm up the machine
o Report any machine issues to maintenance for repair
• Other
o Strong shop math skills
o Good Problem solving skills
o Ability for function independently
o Ability to lift 50 lbs
o Ability to stand, walk and stoop

Apply Now More Info

Machine Operator

Duncan SC

Base Pay: 14.50 per HOUR

Assembly/Duncan/2nd/ $14.50/ Resource MFG is hiring for one of our growing company located in Duncan, Sc. These jobs are temp-to-hire in a clean, a...

Assembly/Duncan/2nd/ $14.50/

Resource MFG is hiring for one of our growing company located in Duncan, Sc. These jobs are temp-to-hire in a clean, air conditioned and heated facility.

Requirements:

*6 months recent experience

*Attention to detail

*Willing to cross train

Hours:

*3:30 pm - 11:30 pm

*Monday through Friday

*Must be willing and able to work overtime when require, including weekends* 

ResourceMFG offers all employees: *Weekly pay! *Direct deposit! *Health benefits! *Referral bonuses!

Apply Now More Info

Injection Mold Setter

Spartanburg SC

Base Pay: 15.00 per HOUR

Resource MFG is looking for an Injection Mold Setters in Gaffney, SC. Summary:Assist to set scheduled molds in presses for production and sample or...

Resource MFG is looking for an Injection Mold Setters in Gaffney, SC.

Summary:
Assist to set scheduled molds in presses for production and sample orders. Connect up all water lines to molds to insure proper cooling without delays occurring due to molds having to re-watered. Set all switches on presses after molds are properly set in so that the press will be ready for cycling without delay. Properly set safety bars and switches. Set mold protection on all presses to eliminate mold damage. Spray all molds to be pulled out of presses with mold protection spray and remove from presses without any damage to molds or press. Clean up all excess equipment and supplies.

Job Requirements:
o Must assist “A” mold setters and have abilities for the following:
o To hang molds in press using extreme caution not to damage locating ring and/or other mold components.
o Clamping molds between platens insuring proper and sufficient clamps are used to keep mold from coming loose.
o Sizing and cutting knock out bars and setting know out strike ¼ to ½” short of full stroke.
o Connects water and air lines:
o Cost control- taking care of hoses, clamps bolts and any other mold supply items to insure longer life.
o Housekeeping- picking up all clutter and tools- keeping mold supply cage clean and organized.
o Insure that safety bars and switches are working properly, and work safely performing above functions.
o Mechanical ability
o Ability to move in and out of presses, climb ladders, and torque bolts to 425 ft. lb.
o General knowledge of mold design and mold cooling system by layout.
o Knowledge of molding press control operations.
o Read, understand and follow “Set Up Prep Checklist” & “Mold Setter General Guidelines”.

Apply Now More Info

Quality Assurance Inspector

Greenville SC

Base Pay: 20.00 per HOUR

Resource MFG is currently hiring a Quality Assurance Inspector for a Machining & Fabrication shop in Greenville, SC. Job Description: Inspect p...

Resource MFG is currently hiring a Quality Assurance Inspector for a Machining & Fabrication shop in Greenville, SC.

Job Description:
Inspect parts and maintain the quality production program to assure manufactured parts meet product specifications.

Job Requirements:
• Must be able to read blue prints
• Must be able to use various types of precision measuring equipment. Micrometers, Calipers, CMM, and gauges
• Complete appropriate Documentation
• Machining background preferred

Apply Now More Info

Maintenance Tech

Greer SC

Base Pay: 19.00 per HOUR

Resource MFG is hiring Maintenance Techs for a Molding facility in Greer SC. Key Responsibilities:Trouble shooting, problem solving and improving t...

Resource MFG is hiring Maintenance Techs for a Molding facility in Greer SC.
Key Responsibilities:
Trouble shooting, problem solving and improving the manufacturing processes including:
• Provide the plant maintenance support including utilities and structure.
• Performs the scheduled preventative/predictive maintenance program to it's specification and guidelines.
• Assists in the manufacture, assembly and installation of machine or plant upgrades.
• Manage projects or repair work orders including problem, remedy, labor, parts and downtime.
• Promotes Company's safety efforts and maintains a safe working environment for employees.
Job Duties: Include, but not limited to….
• Preventative Maintenance
• Pipe Fitting
• Reading Blueprints
• Welding
• Machining
• Hydraulics
• Pneumatics
• Electrical Maintenance
• Mechanical Maintenance
• Facilities Maintenance
Shift:
2nd Shift 3:00pm – 11:30pm (Will train on 1st shift 7:00am-3:30pm)
Pay:
$18.00 per hour, plus a $1.00 per hour shift differential

Apply Now More Info

Tooling Technician

Greer SC

Base Pay: 14.50 per HOUR

ResourceMFG is interviewing candidates for a mold/tool setter for the Greenville/Spartanburg, SC area. This is a 2nd shift position that would trai...

ResourceMFG is interviewing candidates for a mold/tool setter for the Greenville/Spartanburg, SC area. This is a 2nd shift position that would train on 1rst shift for 4 weeks.

Duties will include but may not be limited to:
*Removing tools from press at production run completion
*Inspecting tools for damage or repair needs and prep for storage
*Prepare tools for production
*Configure press to accept tooling
*Preventative maintenance
*Perform routine inspections on all molds frames
*Documentation and record keeping

Required:
*Forklift certification
*Ability to read and properly interpret work instructions
*Knoweledge of power and hand tools
*Organizational skills
*A minimum of a high school diploma or GED is required for this position.
*All candidates should be able to lift, push, pull, carry up to 75 pounds with assistance as needed.

Apply Now More Info
greenville.jpg

Staff Bios

Charlie Sanders
Charlie Sanders Area Vice President Contact Charlie Sanders
  • Started with the company in 2000, 25 years in the staffing industry
  • BA from the University of South Carolina; MBA from Winthrop University
  • CSCMP & SHRM member
  • President's Club 2016
Mandi Bickes
Mandi Bickes Market Manager Contact Mandi Bickes
  • Started with the company in 2008
  • President's Club 2013, 2014, 2015, 2016
Michelle Hendrix
Michelle Hendrix Branch Manager Contact Michelle Hendrix
  • Started with the company May 2011
  • President’s Club 2011, 2014, 2015, 2016
Live Chat