Questions? 1-877-404-8449

Branch No: 81304
5 Oak Branch Drive
Suite "G"
Greensboro, NC 27407
Phone: (336) 855-4945

Available Positions

15 positions available.

Small/Medium Parts Manufacturing Technician

Graham NC

Base Pay: 12.00 per HOUR

MAIN DUTIES/RESPONSIBILITIES:  • Casting refractory parts by mixing materials and pouring into molds • Prep molds for parts (finishe...

MAIN DUTIES/RESPONSIBILITIES: 

• Casting refractory parts by mixing materials and pouring into molds

• Prep molds for parts (finished parts weigh between 2-80 lbs).

• De-mold refractory part

• Cosmetic work

o Wash coating

o Hand sanding

o Check for cracks , voids fill if necessary

• Transfer to proper shelf in curing room

• If needed operate mobile equipment or crane

• Maintain a clean and safe work-space, and abide by workplace health and safety policies and procedures

• Other tasks as directed 

Apply Now More Info

Saw Operator

High Point NC

Base Pay: 10.00 per HOUR

The Saw Operator • Operate a saw under limited supervision. • Preform cutting of metal furniture pieces. • Inspect pieces for metal...

The Saw Operator

• Operate a saw under limited supervision.

• Preform cutting of metal furniture pieces.

• Inspect pieces for metal for defects.

 

Apply Now More Info

Material Handler

Mocksville NC

Base Pay: 14.00 per HOUR

ResourceMFG is hiring for Mocksville area in a forklift material handling role.   Shift: 6a-2p is typical shift but right now are on overtime...

ResourceMFG is hiring for Mocksville area in a forklift material handling role.

 

Shift: 6a-2p is typical shift but right now are on overtime are working 6a-4p Mon-Fri and sometimes on Saturday depending on production. 

 You will receive a pick sheet, or Bill of Material, with a bunch of parts listed that they need to find to that we will use to build the air compressor.   Usually there’s about 45 parts for each machine pick and it takes about 30 seconds to pick each part.  They should be completing a pick sheet every 45 minutes to keep up with our assembly TAKT time.   It requires a lot of attention to detail while also working with a sense of urgency.

 

If this fits what your skill set is we would like for you to apply below!!!!!

 Locates parts necessary for assembly. Be able to drive stand up forklift be able to work overtime Move part throughout the warehouse

Apply Now More Info

Assembler

HIGH POINT NC

Base Pay: 10.00 per HOUR

Check to be sure all components are available for units to be assembled. Inspect product being assembled. Visual checks and proper function of...

  • Check to be sure all components are available for units to be assembled.
  • Inspect product being assembled. Visual checks and proper function of mechanism. If problem exists, determine cause, disassemble if necessary and replace non-functioning parts.
  • Problems not solved, shut down and report to Supervisor 

Apply Now More Info

Assembler

Winston Salem NC

Base Pay: 13.00 per HOUR

Furniture Manufacturer in Advance, NC Assembling opportunities available  No experience necessary full training provided Climate controlled f...

Furniture Manufacturer in Advance, NC

Assembling opportunities available 

No experience necessary full training provided

Climate controlled facility with an in-house cafeteria

1st shift hours

$13.00 per hour

 

Apply Now More Info

Assembler

Advance NC

Base Pay: 13.00 per HOUR

Manufacturing laborer will be assigned from time to time, to one or more positions with the manufacturing facility. You will be informed of the sta...

Manufacturing laborer will be assigned from time to time, to one or more positions with the manufacturing facility. You will be informed of the standard operating procedure for the position assigned to you before you start work at your assigned position. Its your responsibility to follow this standard operating procedure while working at your assigned position. You will use hand tools, adhesives, jigs, fabrics and other components to build a piece of furniture.

Apply Now More Info

CNC Machinist Setup Technician

High Point NC

Base Pay: 19.00 per HOUR

Responsibilities: Correctly program, setup and diagnose errors on a variety of machines to meet production goals, to include CNC Lathes, CNC Mills,...

Responsibilities: Correctly program, setup and diagnose errors on a variety of machines to meet production goals, to include CNC Lathes, CNC Mills, Manual Mills and Automatic Saws. Perform analysis needed to make proper tool selection for new processes. Inspect parts produced to ensure conformance to specifications. Input data into ERP system. Load/operate machines in peak loads, perform general preventative maintenance, housekeeping and other duties as required.

Basic Qualifications: High School diploma and basic math proficiency. Minimum 4 years' experience in similar role. Ability to follow verbal and written instruction with skill to recognize when further clarification is required. Ability to read and understand blue prints & geometrical dimensional tolerances to compare with parts produced. Ability to use traditional QA instruments to verify dimensional conformance.

Preferred Qualifications: Prefer 5 years or more of programming experience with Mastercam, and related experience with the specific machinery such as Haas ST-20, Mitsubishi & Brother 3 axis milling centers, and Takisawa dual spindle turning centers.

Apply Now More Info

Punch Press

High Point NC

Base Pay: 18.00 per HOUR

Responsibilities: Correctly setup, run and troubleshoot errors with CNC punch press to meet production goals. Inspect parts produced to ensure conf...

Responsibilities:

Correctly setup, run and troubleshoot errors with CNC punch press to meet production goals. Inspect parts produced to ensure conformance to specifications. Make appropriate adjustments to machine to control speed, material feed and path of bend. Input data into ERP system. Perform general preventative maintenance, housekeeping and other duties as required.

Basic Qualifications: High School diploma and basic math proficiency.

Minimum 2 years' experience in similar role. Ability to follow verbal and written instruction with skill to recognize when further clarification is required. Ability to read and understand blue prints & dimensional tolerances to compare with parts produced. Ability to use traditional QA instruments to verify dimensional conformance.

Preferred Qualifications:

Prefer 5 years of related experience. Experience with tool selection and form troubleshooting helpful.

Apply Now More Info

Shipping and Receiving

Troutman NC

Base Pay: 16.00 per HOUR

Resourcemfg Is hiring in Troutman for a Back dock receiving coordinator and a shipping receiving inventory coordinator Looking for some who has for...

Resourcemfg Is hiring in Troutman for a Back dock receiving coordinator and a shipping receiving inventory coordinator

Looking for some who has forklift exp. inventory experience, shipping and receiving experience. If this is you apply now!!

Temp to hire

Payrate: range 15 and above

 

We offer the following benefits 

Free online education

weekly pay

insurance

great company to work for

Apply Now More Info

Production Associate

Greensboro NC

Base Pay: 12.00 per HOUR

$12.00 per hour Greensboro Area   12 hour shifts Great pay and Environment  Pay increase after 520 hours to 15.62 at conversion 

$12.00 per hour

Greensboro Area  

12 hour shifts

Great pay and Environment 

Pay increase after 520 hours to 15.62 at conversion 

Apply Now More Info

Forklift Operator

Statesville NC

Base Pay: 11.00 per HOUR

ResourceMFG is hiring for these shifts is 4am to 12:30pm or 9:30am to 6pm in Statesville.  The positions are for forklift position will be shi...

ResourceMFG is hiring for these shifts is 4am to 12:30pm or 9:30am to 6pm in Statesville. 

The positions are for forklift position will be shipping and picking.

We offer the following benefits!!!

     free online education

     Weekly pay

     Insurance

 

If these hours work for you apply now!!!

 

 

 

 

 

 

 

 

 

 

Apply Now More Info

Grinder Operator

HIGH POINT NC

Base Pay: 10.00 per HOUR

Grinder opportunity in the High Point Area 2nd shift position Apply Now and give us a call if you are interested! Deburr, buff or polish material...

Grinder opportunity in the High Point Area

2nd shift position

Apply Now and give us a call if you are interested!

  • Deburr, buff or polish material
  • Inspect material to the specification  

Apply Now More Info

Mold Manufacturing Technician

Graham NC

Base Pay: 14.00

Mold Technician  Burlington Area  Openings on 1st and 2nd Shift  Prepare and finish mold assemblies Operates power equipment •...

Mold Technician 

Burlington Area 

Openings on 1st and 2nd Shift 

Prepare and finish mold assemblies

Operates power equipment

• Great skills  to have for this position

– welding

• Minor carpentry

• Molds Prep

Fabrication 

Apply Now More Info

Line Assemblers

HAMPTONVILLE NC

Base Pay: 11.50 per HOUR

ResourceMFG is hiring in the Hamptonville are for two different shifts!!!! 2nd and 3rd If you looking for a company you can grow with!! Temp to hir...

ResourceMFG is hiring in the Hamptonville are for two different shifts!!!!

2nd and 3rd

If you looking for a company you can grow with!!

Temp to hire

We offer the following benefits!!! 

free online education

weekly pay

insurance

 

 

Apply Now More Info

Line Assemblers/Dis

Yadkinville NC

Base Pay: 11.50 per HOUR

Hiring in Yadkinville area!! Looking to make money to go on that vacation you have been wanting to go on.  Payrate $11:50 shift: 3rd is $11.25...

Hiring in Yadkinville area!! Looking to make money to go on that vacation you have been wanting to go on. 

Payrate $11:50 shift: 3rd is $11.25

2nd shift and 3rd shift 

We offer the following benefits!!!!!

Insurance day of start

Employee referral bonus

Free online courses Job 

Apply Now More Info

Staff Bios

Shannon Adams
Shannon Adams Staffing Assistant Contact Shannon Adams
  • Started in April 2018
  • Skilled in manufacturing
Indira Arredondo
Indira Arredondo Staff Performance Manager Contact Indira Arredondo
  • Started with the company February 2015, five years in the staffing industry
  • Some college at Forsyth Tech and some online classes at University of Phoenix
Ashley Boyd
Ashley Boyd Personnel Supervisor Contact Ashley Boyd
  • Started with the company November 2016, eight years recruiting/HR experience
  • Bachelors of Arts in Organization Management, Masters of Business Administration in Information Systems
Corey Larkins
Corey Larkins Business Development Manager Contact Corey Larkins
  • Started with the company September 2015, one year in the industry
  • BS of Science, Michigan State University
  • Member MWBE
  • ResourceMFG Manufacturing and Safety Training
Amy Nelson
Amy Nelson Personnel Supervisor Contact Amy Nelson
  • Started with the company April 2017
  • Master’s Degrees in Project Management and Operations and Supply Chain Management
Ronald Royal
Ronald Royal Branch Manager Contact Ronald Royal
  • Started with the company in 2005
  • Graduate of Western Carolina University
  • ResourceMFG Certification
Offline, leave a message
X
 
Thank you!
 

 
Thank you for contacting us. We will reach out to you within the next 24 hours.

An error was encountered and your message was not submitted. Please try again later.
Chat is Currently Offline,
Please leave a message.