All 2017 W2s will be sent by 1/31/2018 to the address on file as of 12/31/2017.

close

Questions? 1-877-404-8449

Branch No: 80130-6278
8401 Church Street, Unit G
Gilroy, CA 95020
Phone: (408) 342-1365

Available Positions

31 positions available.

Packing Associate

Morgan Hill CA

Base Pay: 12.66

Position: Shipping Associate-Packers and Stackers Salary: $12.66 Shift: M-F (7am- 3:30pm) Location: Morgan Hill Job Description:Collect daily order...

Position: Shipping Associate-Packers and Stackers

Salary: $12.66

Shift: M-F (7am- 3:30pm)

Location: Morgan Hill

Job Description:
Collect daily order form and receive instructions from Packing Supervisor and/or Lead person; inform Supervisor or Lead person of any short packs.

Verify that all products being shipped includes completed Material Identification Tags, correct date codes and labels, and product is correct to customer orders.

Palletize according to customer orders; on a regular or PECO pallet

Rotate cooler product for proper usage, and clean shipping cooler at the end of each shift.

Perform all requirements of sanitation HACCP and GMP standards including hairnet, beard net, and personal hygiene policies. Special clothing may be required from time to time for sanitation purposes.

Observe and practice safety procedures at all times. Be safety conscious. Correct or notify supervisor of safety hazards. In the event of an accident, notify supervisor immediately. Attend Department Safety Meetings.

File reports and paperwork in proper cubbies.

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.

Good communication, math and organizational skills
Ability to operate manual pallet jacks and forklift

Apply Now More Info

Maintenance QA Technician

Morgan Hill CA

Base Pay: 13.38

Position: Maintenance Technician Salary: $ 13.38 Shift: 7am-3:30pm Mornings Sun- Sat (w/ 2 days off during the weekday) Location: Morgan Hill -&nbs...

Position: Maintenance Technician

Salary: $ 13.38

Shift: 7am-3:30pm

Mornings Sun- Sat (w/ 2 days off during the weekday)

Location: Morgan Hill

-       Must be progressing satisfactorily in the following crafts:  Inspection and functionality of the MPA, Thoroughly investigate any odd mechanical behavior or sounds that may occur during the pre-operation function test, general maintenance, and sanitation of the units.

-       Must perform work with minimum or no supervision.

-       Regular and predictable attendance.

-       Must be able to perform all duties listed for MPA technician.

-       Must perform work with minimum supervision.

-       Must accept additional responsibilities as directed by the supervisor.

-       Must be able to work with peers on troubleshooting skills.

-       Must be self-motivated, possess some degree of initiative, and be able to develop leadership skills, be able to read, and comprehend directives as well as give directives in an understandable manner.

-       Maintain good housekeeping practices.

-       Perform all requirements of sanitation HACCP and GMP standards including hairnet, beard net, and personal hygiene policies. Special clothing may be required from time to time for sanitation purposes.

Observe and practice safety procedures at all times. Be safety conscious. Correct or notify supervisor of safety hazards. In the event of an accident, notify supervisor immediately. Attend Safety Meetings.

Apply Now More Info

Receiving Clerk

Gilroy CA

Base Pay: 15.25

Position: Receiver Warehouse Associate Salary: $15.25/ Hr. Shift: 2am-11:30am (M-F) Location: Gilroy, Ca. Job Description POSITION PURPOSE: Respons...

Position: Receiver Warehouse Associate Salary: $15.25/ Hr.

Shift: 2am-11:30am (M-F) Location: Gilroy, Ca.

Job Description

POSITION PURPOSE: Responsible for having a strong understanding of the entire warehouse and receiving procedures. Also needs to understand the products, receiving procedures, and back stock put away procedures. A receiver is responsible for moving product off trucks, monitoring the quality of product, entering it into inventory, and properly putting product in its respective staging location. ESSENTIAL FUNCTIONS AND BASIC DUTIES: • Checks with supervisors or leads at the beginning of the shift to discuss any issues or changes in the daily procedure. • Verifies quantities of product received against the packing slip/purchase order. • Checks and reports any damage found due to refrigeration, travel or handling by inbound freight company. • Sorts or breakdowns all incoming product. • Builds steady and secure pallets to be put into back stock reserves. • Wraps pallets whenever necessary. • Ensures that all labeling of product and pallets are accurate for put-away in proper pick slot or back stock location • Keeps area clean and debris out of work area; ensures a safe working environment. • Inspects assigned jack for safety issues. • Operates all equipment in a safe and efficient manner. • Wears personal protective equipment as required. • Reports to supervisor or lead any violation of company policy. • Perform duties in accordance with Hazard Analysis Critical Control Points (HACCP) and Safe Quality Food (SQF) policies and procedures, as appropriate for location PERFORMANCE MEASUREMENTS: • Receiver functions are completed in accordance with Company standards and procedures including quality standards and safety regulations. • Effective communication and coordination exist with Company personnel and with • Management. Assistance and support are provided as needed. • Deadlines are met. Required Skills QUALIFICATIONS: EDUCATION/CERTIFICATION: •

Apply Now More Info

Clerical Analyst

Morgan Hill CA

Base Pay: 15.00

Clerical AnalystPay Range: $ 15.00-22.00/hour DOEShift: Mon- FriLocation: Morgan Hill, CA Clerical Analyst• 2-3 month assignment • Requir...

Clerical Analyst
Pay Range: $ 15.00-22.00/hour DOE
Shift: Mon- Fri
Location: Morgan Hill, CA

Clerical Analyst
• 2-3 month assignment

• Requirements and job duties:
o Firm but pleasant phone personality, ability to speak with people of various hierarchical levels
o Average Excel and Acrobat skills; can transcribe information from PDF files into spreadsheets and create tables
o Good time management skills; can work effectively on numerous long-term projects simultaneously

Apply Now More Info

Packaging

Morgan Hill CA

Base Pay: 12.54

Position: Packing Salary: $12.54/ HR Shift: M-F (5am-5pm) 12Hr. Shifts Location: Morgan Hill, CA Department:  This position is responsible for...

Position: Packing

Salary: $12.54/ HR

Shift: M-F (5am-5pm) 12Hr. Shifts

Location: Morgan Hill, CA

Department:  This position is responsible for assisting the Packaging Lead/Supervisor in the completion of the daily production requirements per business needs.

Under the direction of the Packaging Supervisor, the Level I Operator will be responsible for maintaining continuous flow of product through the packaging department for all KC Finished Goods per KC/OSHA/CALOSHA safety guidelines while adhering to all Customer Product Specifications, Good Manufacturing Practices, and all KC/USDA/FDA-HACCP standards and requirements.

• Introduction to Food Safety, Sanitation, GMP's and USDA

• Introduction To HACCP

• Able to read, comprehend and adhere to all procedures regarding DMF Associate Safety • General understanding of product flow from Raw Ingredient Receipt through Shipping of Finished Goods • Able to read and comprehend Recipe/BOM instructions and labels • Hand Forming Finished Good Cases, Retail Bases, Lids • Hand Packing, Cupping, Lidding, Sleeve Application and Taping of semi-finished goods • Manual Label Application

• Manual Palletizing Finished Good Cases • Manual Pallet Jack Operation and Safety • Basic Safety and Operational requirements of Automated Case Erecter Machine • Basic Safety and Operational requirements of Mechanical Box Sealer Machine • Basic Safety and Operational requirements of Automated Pallet Shrink Wrap Machine • Basic Safety and Operational requirements of Ink Jet Machine • Basic Safety and Operational requirements of Overwrap/Shrink Tunnel Machines

• Monitor and record Critical Control Point 2 - Critical Limit cooling time/temperature requirements. • Retrieval and review of signed HACCP documents • Generate initial tracking for WOs in X3 • Populate information into finished products binder • Generate/Verify labels • Create Finished Product ID Sheets • Operate a computer • Operate Zebra Label Printer

Apply Now More Info

Warehouse Clerk

Morgan Hill CA

Base Pay: 15.50

Warehouse ClerkSchedule: M-F, day shift hours 8am-4:30pm. May require an occasional weekend and OT.Pay: $15.50/hour Morgan Hill, CA JOB DESCRIPTION...

Warehouse Clerk
Schedule: M-F, day shift hours 8am-4:30pm. May require an occasional weekend and OT.
Pay: $15.50/hour
Morgan Hill, CA


JOB DESCRIPTION:
The Warehouse Clerk ensures that all inventory is properly handled, labeled, packaged and accounted for.
- Unload deliveries and stage for receiving inspection or put-away
- Perform data entry as required
- Stock inventory onto proper shelf locations
- Practice FIFO inventory issuance
- Pick inventory for transfer to production or shipment to customers or vendors
- Perform inventory cycle counts
- Research missing inventory/materials and report any discrepancies
- Assist warehouse, shipping and receiving personnel with day to day activities as needed
- Perform other duties as assigned by Warehouse Supervisor/Lead or designee

EXPERIENCE AND/OR EDUCATION REQUIREMENTS:
- Minimum high school diploma or equivalent
- Minimum of 1 year of related experience in a warehouse environment, previous experience supporting a manufacturing environment is preferred

REQUIREMENTS:

- Must be familiar with computer systems including MS Office and data base systems (FileMaker Pro preferred)
- Must be able to communicate clearly (written and verbally) in English
- Excellent interpersonal, communication and organizational skills and the ability to work with all levels of the company
- Ability to operate a pallet jack and fork lift
- Maintain work areas in neat, orderly and safe manner
- Must be capable of lifting up to 35 lbs

Apply Now More Info

Packaging (Morning Shift)

GILROY CA

Base Pay: 13.00

Position: Packing AssociateSalary: $13.00hr.Shift: 5:30am-2:00pm (M-F)Locaton: Gilroy, CADuties Include: ? Packaging? Labeling? Boxing? Shipping? W...

Position: Packing Associate
Salary: $13.00hr.
Shift: 5:30am-2:00pm (M-F)
Locaton: Gilroy, CA
Duties Include:
? Packaging
? Labeling
? Boxing
? Shipping
? Working in a fast paste and cold environment.

Apply online www.resourcemfg.com and call 408.342.1365

Apply Now More Info

Production Technician (12 Hr AM)

Morgan Hill CA

Base Pay: 15.50

Production TechnicianPay Range: $ 17.50 /hour Shift: Sun- Sun (Overtime Required)Location: Morgan Hill, CA Job Duties:Production Technician is resp...

Production Technician
Pay Range: $ 17.50 /hour
Shift: Sun- Sun (Overtime Required)
Location: Morgan Hill, CA

Job Duties:
Production Technician is responsible for operating machines used in the coating and preparing of composite materials.

Operates computer-controlled machines used in the coating and preparing of composite materials.
Includes machine setup, movement and lifting (40 pounds) of materials.
Preparation (wrapping and labeling) of the product for processing, loading and unloading product from the equipment.
Makes measurements of the finished product.
Maintains records of materials used in manufacturing process.
Maintain a clean working environment and follow all safety policies.
Recognizes equipment and product problems, notifies lead/supervisor and/or troubleshoots in order to achieve optimum production levels.
Perform other duties as assigned.

Experience and/or Education:
High school diploma or equivalent.
Ability to setup and operate computer controlled equipment.
Math and basic computer skills required.

Requirements:
Strong mechanical aptitude.
Must be able to communicate clearly (written and verbally) in English.
Ability to convert grams to pounds.
Must be able to follow written and verbal instructions for machine operation.
Able to work and communicate as a team.
Maintain work areas in a neat, orderly and safe manner.
Must be capable of lifting up to 40 pounds.
Excellent attendance; ability to work overtime, weekends and off-shifts when needed.

Apply Now More Info

Production Technician (Standard Graveyard)

Morgan Hill CA

Base Pay: 15.50

Production TechnicianPay Range: $ 16.50/hour Shift: Mon- Fri (Overtime Required)Location: Morgan Hill, CA Job Duties:Production Technician is respo...

Production Technician
Pay Range: $ 16.50/hour
Shift: Mon- Fri (Overtime Required)
Location: Morgan Hill, CA

Job Duties:
Production Technician is responsible for operating machines used in the coating and preparing of composite materials.

Operates computer-controlled machines used in the coating and preparing of composite materials.
Includes machine setup, movement and lifting (40 pounds) of materials.
Preparation (wrapping and labeling) of the product for processing, loading and unloading product from the equipment.
Makes measurements of the finished product.
Maintains records of materials used in manufacturing process.
Maintain a clean working environment and follow all safety policies.
Recognizes equipment and product problems, notifies lead/supervisor and/or troubleshoots in order to achieve optimum production levels.
Perform other duties as assigned.

Experience and/or Education:
High school diploma or equivalent.
Ability to setup and operate computer controlled equipment.
Math and basic computer skills required.

Requirements:
Strong mechanical aptitude.
Must be able to communicate clearly (written and verbally) in English.
Ability to convert grams to pounds.
Must be able to follow written and verbal instructions for machine operation.
Able to work and communicate as a team.
Maintain work areas in a neat, orderly and safe manner.
Must be capable of lifting up to 40 pounds.
Excellent attendance; ability to work overtime, weekends and off-shifts when needed.

Apply Now More Info

Production Technician (Standard Swing)

Morgan Hill CA

Base Pay: 15.50

Production TechnicianPay Range: $ 16.25/hour Shift: Mon- Fri (Overtime Required)Location: Morgan Hill, CA Job Duties:Production Technician is respo...

Production Technician
Pay Range: $ 16.25/hour
Shift: Mon- Fri (Overtime Required)
Location: Morgan Hill, CA

Job Duties:
Production Technician is responsible for operating machines used in the coating and preparing of composite materials.

Operates computer-controlled machines used in the coating and preparing of composite materials.
Includes machine setup, movement and lifting (40 pounds) of materials.
Preparation (wrapping and labeling) of the product for processing, loading and unloading product from the equipment.
Makes measurements of the finished product.
Maintains records of materials used in manufacturing process.
Maintain a clean working environment and follow all safety policies.
Recognizes equipment and product problems, notifies lead/supervisor and/or troubleshoots in order to achieve optimum production levels.
Perform other duties as assigned.

Experience and/or Education:
High school diploma or equivalent.
Ability to setup and operate computer controlled equipment.
Math and basic computer skills required.

Requirements:
Strong mechanical aptitude.
Must be able to communicate clearly (written and verbally) in English.
Ability to convert grams to pounds.
Must be able to follow written and verbal instructions for machine operation.
Able to work and communicate as a team.
Maintain work areas in a neat, orderly and safe manner.
Must be capable of lifting up to 40 pounds.
Excellent attendance; ability to work overtime, weekends and off-shifts when needed.

Apply Now More Info

Production Technician (Standard Day)

Morgan Hill CA

Base Pay: 15.50

Production TechnicianPay Range: $ 15.50 /hour Shift: Mon - Fri (Overtime Required)Location: Morgan Hill, CA Job Duties:Production Technician is res...

Production Technician
Pay Range: $ 15.50 /hour
Shift: Mon - Fri (Overtime Required)
Location: Morgan Hill, CA

Job Duties:
Production Technician is responsible for operating machines used in the coating and preparing of composite materials.

Operates computer-controlled machines used in the coating and preparing of composite materials.
Includes machine setup, movement and lifting (40 pounds) of materials.
Preparation (wrapping and labeling) of the product for processing, loading and unloading product from the equipment.
Makes measurements of the finished product.
Maintains records of materials used in manufacturing process.
Maintain a clean working environment and follow all safety policies.
Recognizes equipment and product problems, notifies lead/supervisor and/or troubleshoots in order to achieve optimum production levels.
Perform other duties as assigned.

Experience and/or Education:
High school diploma or equivalent.
Ability to setup and operate computer controlled equipment.
Math and basic computer skills required.

Requirements:
Strong mechanical aptitude.
Must be able to communicate clearly (written and verbally) in English.
Ability to convert grams to pounds.
Must be able to follow written and verbal instructions for machine operation.
Able to work and communicate as a team.
Maintain work areas in a neat, orderly and safe manner.
Must be capable of lifting up to 40 pounds.
Excellent attendance; ability to work overtime, weekends and off-shifts when needed.

Apply Now More Info

Warehouse Clerk

Morgan Hill CA

Base Pay: 15.50

Warehouse ClerkSchedule: M-F, day shift hours 8am-4:30pm. May require an occasional weekend and OT.Pay: $15.50/hour Morgan Hill, CA JOB DESCRIPTION...

Warehouse Clerk
Schedule: M-F, day shift hours 8am-4:30pm. May require an occasional weekend and OT.
Pay: $15.50/hour
Morgan Hill, CA


JOB DESCRIPTION:
The Warehouse Clerk ensures that all inventory is properly handled, labeled, packaged and accounted for.
- Unload deliveries and stage for receiving inspection or put-away
- Perform data entry as required
- Stock inventory onto proper shelf locations
- Practice FIFO inventory issuance
- Pick inventory for transfer to production or shipment to customers or vendors
- Perform inventory cycle counts
- Research missing inventory/materials and report any discrepancies
- Assist warehouse, shipping and receiving personnel with day to day activities as needed
- Perform other duties as assigned by Warehouse Supervisor/Lead or designee

EXPERIENCE AND/OR EDUCATION REQUIREMENTS:
- Minimum high school diploma or equivalent
- Minimum of 1 year of related experience in a warehouse environment, previous experience supporting a manufacturing environment is preferred

REQUIREMENTS:

- Must be familiar with computer systems including MS Office and data base systems (FileMaker Pro preferred)
- Must be able to communicate clearly (written and verbally) in English
- Excellent interpersonal, communication and organizational skills and the ability to work with all levels of the company
- Ability to operate a pallet jack and fork lift
- Maintain work areas in neat, orderly and safe manner
- Must be capable of lifting up to 35 lbs

Apply Now More Info

Warehouse Selector

Gilroy CA

Base Pay: 15.25

Position: Warehouse SelectorSalary: 10:00am- 8:30pm (Including Overtime)Shift: Sun.-Fri (10Hr. Shift)Location: Gilroy, CA.Job Description:Inspects...

Position: Warehouse Selector
Salary: 10:00am- 8:30pm (Including Overtime)
Shift: Sun.-Fri (10Hr. Shift)
Location: Gilroy, CA.
Job Description:
Inspects assigned jack for safety issues
Enters the proper information into the productivity measure
Identifies the correct pick location and pick sequence in accordance with the order
Picks the correct item and quantity, checking UPC’s or item descriptions
Places pick labels on the side of the cases
Correctly identifies Master Case locations
Identifies and immediately reports miss-located products
Shrink wraps and labels with correct truck, stop and other required information
Stages pallets in an appropriate bay
Listens for first and last call and obtains all out of stocks in a timely manner
Keeps area clean and debris out of work area
Immediately inform a foreman, supervisor or manager of any potential safety threats
Obtains aisle-cleaning assignment
Operates pallet jack/push cart in a safe and efficient manner
Reports to supervisor or lead any violation of company policy
Builds a stable and well-cubed pallet
Parks and recharges pallet jack in its appropriate spot at the end of your shift
Perform duties in accordance with Hazard Analysis Critical Control Points (HACCP) and Safe Quality Food (SQF) policies and procedures, as appropriate for location
Other duties as assigned

Apply Now More Info

Shipping & Receiving (Morning Shift)

GILROY CA

Base Pay: 13.00

Sanitation AssociatePay Rate: $13.00/hourJob Type: Temp-to-HireWork Schedule/Shift: 3:00 PM-12:00 AM ,5 days/week.Location: Gilroy, CA Job Duties:A...

Sanitation Associate
Pay Rate: $13.00/hour
Job Type: Temp-to-Hire
Work Schedule/Shift: 3:00 PM-12:00 AM ,5 days/week.
Location: Gilroy, CA

Job Duties:
Associate will be responsible for conducting sanitation responsibilities to include wiping down machines, sanitizing machines and maintaining a clean facility.

Work performed will adhere to food safety, food defense, GMP and sanitation procedures and equipment as required.

Willingness to perform routine manual work; physical condition commensurate with the demands of the position; ability to follow verbal instructions: the ability to read cleaning agent labels and instructions.

Cleans and sanitizes equipment, containers, packing and processing facilities as required to meet industry standards using the appropriate equipment.
Performs inspection as required for HACCP and GMP programs and adheres to all HACCP AND GMP program documentation and check requirements pertaining to the position.

Environment:

Warehouse/Packing facility. Temperature is approx. 65 degrees.

Apply Now More Info

Packaging (Morning Shift)

GILROY CA

Base Pay: 13.00

Position: Packing AssociateSalary: $13.00hr.Shift: 5:30am-2:00pm (M-F)Locaton: Gilroy, CADuties Include: ? Packaging? Labeling? Boxing? Shipping? W...

Position: Packing Associate
Salary: $13.00hr.
Shift: 5:30am-2:00pm (M-F)
Locaton: Gilroy, CA
Duties Include:
? Packaging
? Labeling
? Boxing
? Shipping
? Working in a fast paste and cold environment.

Apply online www.resourcemfg.com and call 408.342.1365

Apply Now More Info

Lab Chemist (Entry Level)

Morgan Hill CA

Base Pay: 24.00

R & D Chemist (Entry Level)Shift: Mon-Fri 8:00am - 4:30pmPay Rate: $24-26Location: Morgan Hill CAJOB DESCRIPTION: - Support all R&am...

R & D Chemist (Entry Level)
Shift: Mon-Fri 8:00am - 4:30pm
Pay Rate: $24-26
Location: Morgan Hill CA
JOB DESCRIPTION: 

- Support all R&D activities in the resin and prepreg development area
- Perform lab mixes of new and experimental resin systems as directed 
- Perform lay up and cure of composites following specific procedural designs.
- Assist with mechanical and chemical tests of resins and composites 
- Ability to be trained to run analytical and mechanical testing equipment 
- Recording of experimental results (lab book, computer files) 


EXPERIENCE AND/OR EDUCATION REQUIREMENTS: 

- Bachelor degree of a scientific discipline, either in Material Science or Chemistry (Preferred), is required.
- Familiarity with basic computer programs. 


SKILLS/ KNOWLEDGE REQUIREMENTS: 

- Strong mechanical aptitude and technical skills
- Must be able to communicate clearly (written and verbally) in English 
- Previous experience in technical, lab or academic working environment preferred
- Must be able to keep accurate records of all work performed in the lab 
- Previous database use preferred
       

Essential Functions

Apply Now More Info

Mechanical Assembler

Hollister CA

Base Pay: 13.00

Position: Mechanical AssemblerPay Rate: $13.00/hourShift: Mon- Thurs. (6am-4:30pm) Some Fridays and SaturdaysLocation: Hollister, Ca. Description:...

Position: Mechanical Assembler
Pay Rate: $13.00/hour
Shift: Mon- Thurs. (6am-4:30pm) Some Fridays and Saturdays
Location: Hollister, Ca.

Description:

Performs various production assembly operations on components and sub-assemblies. Working under limited supervision uses visual aids, lists, and verbal and written instruction to assemble, modify, re-work or re-assemble units. Assignments are complex. Receives minimal instruction on routine work and general instructions on new assignments. May guide work of Assembler I and II. All work is performed in explosive handling areas or where explosive devices may be present.

 

• Follow and meet manufacturing build schedules.

• Manufacture sub-assemblies.

• Knowledge of condition and countability of sub-assemblies.

• Set-up and operate electrical test equipment.

• Must know and be able to recognize proper tooling for a specific task.

• Must be able to perform mechanical assembly and solder connections.

• Must be able to work from assembly prints, drawings and work orders.

• Train less experienced assemblers as required.

• Other functions as assigned.

 

Qualifications:

• Entry-level OK; minimum of 6 months’ experience preferred.

• Applicants selected will be subject to a government investigation (background screening) and must meet eligibility requirements for access to classified information. Process to be initiated immediately after transfer.

• Cross-trained in multiple operations.

• Must be able to read and understand manufacturing procedures.

• Experienced in using a variety of hand tools, measuring devices, microscope.

• General knowledge of calibration systems.

• Preferred to have basic soldering and/or welding skills.

• Strong interaction skills also required.

• Lift up to 25 lbs.

Apply Now More Info

Entry Level Mechanic

Morgan Hill CA

Base Pay: 13.45

Position: Entry Maintenance MechanicSalary: $13.45/ Hr.Shift: OpenLocation: Morgan Hill The entry-level mechanic position Conducts machine setup, r...

Position: Entry Maintenance Mechanic
Salary: $13.45/ Hr.
Shift: Open
Location: Morgan Hill

The entry-level mechanic position Conducts machine setup, repairs, and preventive maintenance service.
Key duties/responsibilities of the Entry Level Mechanic
Provides emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service.
- Prepares and sets up machinery for scheduled production runs.
- Performs mechanic skills including, but not limited to, replacing belts, chains, and sprockets.
- Provides emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service.
- Dismantles devices to gain access to and remove defective parts.
- Assemble production machinery which includes setting and aligning:
- Bearings, Shafts, Belts, Gears, Sprockets, Chain, Knives
- Lubricates and cleans parts
- Repair Welding
- Lifting, Carrying, 50 lb. lift min.
- Comply with OSHA safety and health rules
Entry Level Mechanic Qualifications:
- Must be able to read a tape measure
- Basic math
Other Duties

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Apply Now More Info

Maintenance Supervisor

Morgan Hill CA

Base Pay: 70K

Position: Maintenance MechanicSalary 50-70KShift: Sun- Thurs. (8am-5pm)Location: Morgan Hill, Ca.POSITION SUMMARY: To plan, organize and direct the...

Position: Maintenance Mechanic
Salary 50-70K
Shift: Sun- Thurs. (8am-5pm)
Location: Morgan Hill, Ca.
POSITION SUMMARY:
To plan, organize and direct the maintenance of Packing Department and Production Line equipment and structures to produce the highest quality product at optimum cost and with a minimum of down time. This position requires a “hands on / people person” with good supervisory skills and creative problem solving. A strong electrical background, mechanical experience, knowledge of production principles and process controls. Bilingual (Spanish) and HVAC capability are considered a plus. The work schedule is 5 days a week and requires carrying a cell phone to be available for on call.
- Promote and maintain a high awareness for Employee Safety and Food Safety throughout the Morgan Hill Facility
- Develop a Team of highly competent Maintenance Technicians
- Cross Train with Morgan Hill Facility Maintenance Department
- Develop and Implement Preventive Maintenance Schedule for Packing Department and Production Lines
- Assist with sourcing, installation, training, and operation of new equipment
- Coordinate with Maintenance Dept. Manager to provide 7 day Facility Maintenance coverage
- Order and write Purchase Orders for parts and supplies needed for Packing Department and Production Lines
- Schedule and direct Maintenance Techs to perform necessary maintenance to keep production lines running in a safe, efficient, and reliable manner
- Maintain appropriate inventory of spare parts for Packing and Production equipment.
- Directly supervise maintenance activities, including scheduling, parts procurement, equipment surveys, expenditure approvals, performance reviews, company policy enforcement, and monitoring of routine contractor service and departmental communication
- Confer with Maintenance Manager on planning and priorities
- Maintain Maintenance information/equipment history

Secondary Duties and Responsibilities:
- Manager on Duty
- Member of Safety

Apply Now More Info

Safety Specialist

Morgan Hill CA

Base Pay: 60K

Position: Safety SpecialistSalary: 40-60KShift: Tues-Sat or Sun-Thurs 5am to 3pm or 11pm-8pmLocation: Morgan Hill POSITION SUMMARY: Under the gene...

Position: Safety Specialist
Salary: 40-60K
Shift: Tues-Sat or Sun-Thurs
5am to 3pm or 11pm-8pm
Location: Morgan Hill

POSITION SUMMARY:

Under the general direction of the Human Resources Department, develops and implements safety and environmental programs to minimize the risk of illness and injury in compliance with applicable regulations. Ensures that employees receive mandated safety and environmental training, maintains safety and environmental records and prepares reports for filing with regulatory agencies and insurance companies. This position also advises management of applicable laws and regulations pertaining to safety compliance.

Essential Duties and Responsibilities:
- Develops, implements, updates policies and procedures as mandated by local, state and Federal rules and regulations.
- Conducts audits to ensure that policies and procedures are being followed consistently.
- Ensures compliance with all Federal, State and local government requirements concerning employee safety in accordance with OSHA and the Occupational Injury Benefit Plan.
- Prepares, sources and/or delivers employee training related to safety, industrial hygiene and environmental hazards.
- Schedules training for all employees and follows up to ensure that training requirements are completed timely.
- Prepares and maintains documents and records including chemical inventories, facility maps, lockout tag out instructions, personal protective equipment lists, etc.
- Maintains libraries of safety documents such as Safety Data Sheets (SDS) in hard copy and online. Oversees GHS program.
- Investigates accidents and injuries to identify root causes and recommend corrective actions to reduce the risk of recurrence.
- Works with HR and Department Managers to develop, implement and oversee “Temporary Transitional Duty” program. Ensures employees are in jobs that meet their assigned restrictions and assists with job modification to aid recovery and transition to regular du

Apply Now More Info

Warehouse Operator

Morgan Hill CA

Base Pay: 15.71

ROLES AND RESPONSIBILITIES • Adhere to safe working practices at all times • Prep raw materials as requested on paperwork for each work o...

ROLES AND RESPONSIBILITIES • Adhere to safe working practices at all times • Prep raw materials as requested on paperwork for each work order • Have work orders completed on time • Pay attention and ensure quality of ingredients is the best • Perform daily checks of area for non-compliance and report them to your supervisor • Ensure finished product conforms to specifications • Manufacture quality products efficiently within time and quantity parameters • Follow the company GMP's • Ensure clean and tidy production area at all times • Report Downtime for maintenance in a timely manner • Communicate and update all relevant parties of any issues or changes (low yields, etc.) • Monitor and action all waste • Manage inventory of raw material • Plan ahead to ensure no downtime in kitchen • Set up following shift for success • Ensure all paperwork is filled out neatly and correctly and signed off • Thawing - ensure proper protocol for slacking is followed. Keep accurate temperatures in a timely fashion according to the paperwork and the HACCP plan (when necessary)

Apply Now More Info

Warehouse Operator

Morgan hill CA

Base Pay: 15.21

WAREHOUSE OPERATOR Location:  Morgan Hill, CA Department:  Warehouse Position Type:  full-time ROLES AND RESPONSIBILI...

WAREHOUSE OPERATOR

Location:  Morgan Hill, CA

Department:  Warehouse

Position Type:  full-time

ROLES AND RESPONSIBILITIES

  • This position requires that the individual to be able to ship product, receive and put away product and pull product according to Kettle Cuisine procedures. The individual must be able to work in a safe, accurate and timely manner. They must also be a team player and demonstrate the ability in all he/she does to support the Kettle Cuisine mission of trust.
  • Ship product according to current SQF procedures and/or SOP's
  • Receive and put away product according to current SQF procedures and/or SOP's.
  • Pull product according to current SQF procedures and/or SOP's
  • Perform daily cycle counts accurately and in a timely manner.
  • Other duties as assigned

Apply Now More Info

Prep Cook

Morgan hill CA

Base Pay: 13.00

ROLES AND RESPONSIBILITIES • Adhere to safe working practices at all times • Prep raw materials as requested on paperwork for each work o...

ROLES AND RESPONSIBILITIES • Adhere to safe working practices at all times • Prep raw materials as requested on paperwork for each work order • Have work orders completed on time • Pay attention and ensure quality on ingredients is the best • Perform daily checks of area for non-compliance and report them to your supervisor • Ensure finished product conforms to specifications • Manufacture quality products efficiently within time and quantity parameters • Follow the company GMP's • Ensure clean and tidy production area at all times • Report Downtime to maintenance in a timely manner • Communicate and update all relevant parties of any issues or changes (low yields, etc.) • Monitor and action all waste • Manage inventory of raw material • Plan ahead to ensure no downtime in kitchen • Set up following shift for success • Ensure all paperwork is filled out neatly and correctly and signed off • Thawing - ensure proper protocol for slacking is followed. Keep accurate temperatures in a timely fashion according to the paperwork and the HACCP plan (when necessary)

Apply Now More Info

Kettle Cook

Morgan Hill CO

Base Pay: 15.71

Kettle Cook   Pay Rate: 15.71  Hours: 2:30pm-2:30am  Location:  Morgan Hill, CA Department:  Culinary Position T...

Kettle Cook

 

Pay Rate: 15.71 

Hours: 2:30pm-2:30am 

Location:  Morgan Hill, CA

Department:  Culinary

Position Type:  Hourly

ROLES AND RESPONSIBILITIES

  • Adhere to safe working practices at all times
  • Perform daily checks of area for non-compliance and report them to your supervisor
  • Ensure finished product conforms to specifications
  • Manufacture quality products efficiently within time and quantity parameters
  • Follow the company GMP's
  • Show a positive attitude and a leadership mentality for all employees
  • Ensure clean and tidy production area at all times
  • Report Downtime to maintenance in a timely manner
  • Communicate and update all relevant parties of any issues or changes (low yields, etc.)
  • Monitor and action all waste
  • Take instructions from supervisors.
  • Any other tasks deemed reasonable and reasonably requested by management
  • Cook each recipe with the highest quality and right first time following the procedure
  • Taste as you go - constantly taste the soup and ingredients for quality and doneness
  • Ask for supervisor approval if there are any questions about the soup or ingredients and/or if specified in recipe
  • Responsible for checking that all ingredients are present to make the soup and in the correct quantities and quality
  • Follow HACCP plan - responsible for ensuring Cooking CCP is met for all soups
  • Ensure all paperwork is filled out neatly and correctly and signed off
  • Take responsibility for their kettle(s) and ensure that soup is always looked after

Apply Now More Info

Kettle Cook

Morgan Hill CA CA

Base Pay: 15.21

Kettle Cook   Pay rate: 15.21  Hours: 2:30am-2:30pm   Location:  Morgan Hill, CA Department:  Culinary Posi...

Kettle Cook

 

Pay rate: 15.21 

Hours: 2:30am-2:30pm  

Location:  Morgan Hill, CA

Department:  Culinary

Position Type:  Hourly

ROLES AND RESPONSIBILITIES

  • Adhere to safe working practices at all times
  • Perform daily checks of area for non-compliance and report them to your supervisor
  • Ensure finished product conforms to specifications
  • Manufacture quality products efficiently within time and quantity parameters
  • Follow the company GMP's
  • Show a positive attitude and a leadership mentality for all employees
  • Ensure clean and tidy production area at all times
  • Report Downtime to maintenance in a timely manner
  • Communicate and update all relevant parties of any issues or changes (low yields, etc.)
  • Monitor and action all waste
  • Take instructions from supervisors.
  • Any other tasks deemed reasonable and reasonably requested by management
  • Cook each recipe with the highest quality and right first time following the procedure
  • Taste as you go - constantly taste the soup and ingredients for quality and doneness
  • Ask for supervisor approval if there are any questions about the soup or ingredients and/or if specified in recipe
  • Responsible for checking that all ingredients are present to make the soup and in the correct quantities and quality
  • Follow HACCP plan - responsible for ensuring Cooking CCP is met for all soups
  • Ensure all paperwork is filled out neatly and correctly and signed off
  • Take responsibility for their kettle(s) and ensure that soup is always looked after

Apply Now More Info

TA Lab Technician

Morgan Hill CA

Base Pay: 16.50

TA Lab TechnicianPay: 16.50/hrShift: Mon- Fri 7:00am-3:30pmLocation: Morgan Hill CA JOB DESCRIPTION: R&D Lab Technician is responsible for supp...

TA Lab Technician
Pay: 16.50/hr
Shift: Mon- Fri 7:00am-3:30pm
Location: Morgan Hill CA

JOB DESCRIPTION:

R&D Lab Technician is responsible for supporting all R&D activities in the resin and prepreg development area.

- Perform lab mixes of new and experimental resin systems as directed
- Perform lay up and cure of composites following specific procedures
- Perform mechanical and chemical test of resin and composites
- Capable to be trained to run analytical and mechanical testing equipment.
- Recording of experimental results in lab book and computer files
- Maintain MSDS records and safety procedures of all chemicals in the resin lab
- Maintain cleanliness of the lab areas
- Perform other duties as assigned by Lab Manager or designee

EXPERIENCE AND/OR EDUCATION REQUIREMENTS:

- High school diploma or equivalent
- Able to work with resinous materials and handling chemicals
- Strong math skills - addition, subtraction, multiplication, division, percentage calculation and unit conversion required
- Able to use basic precision measurement equipment such as scales, calipers, micrometers and basic computer skills

REQUIREMENTS:

- MS Office (Word, Excel) proficiency required
- Ability to work accurately and efficiently to complete assigned tasks thoroughly and promptly with supervision by the Sr. Technician or Engineer.
- Strong mechanical aptitude and technical skills
- Must be able to communicate clearly (written and verbally) in English
- Excellent interpersonal, communication and organizational skills and the ability to work with all levels of the company
- Maintain work areas in neat, orderly and safe manner
- Must be capable of lifting up to 20 lbs.

Apply Now More Info

Sanitation Associate

GILROY CA

Base Pay: 13.00

Sanitation Associate Pay Rate: $13.00/hour Job Type: Temp-to-Hire Work Schedule/Shift: 3:00 PM-12:00 AM ,5 days/week. Location: Gilroy, CA  Jo...

Sanitation Associate

Pay Rate: $13.00/hour

Job Type: Temp-to-Hire

Work Schedule/Shift: 3:00 PM-12:00 AM ,5 days/week.

Location: Gilroy, CA

 Job Duties:

Associate will be responsible for conducting sanitation responsibilities to include wiping down machines, sanitizing machines and maintaining a clean facility.

Work performed will adhere to food safety, food defense, GMP and sanitation procedures and equipment as required.

Willingness to perform routine manual work; physical condition commensurate with the demands of the position; ability to follow verbal instructions: the ability to read cleaning agent labels and instructions.

Cleans and sanitizes equipment, containers, packing and processing facilities as required to meet industry standards using the appropriate equipment. 
Performs inspection as required for HACCP and GMP programs and adheres to all HACCP AND GMP program documentation and check requirements pertaining to the position.

Environment:

Warehouse/Packing facility. Temperature is approx. 65 degrees.

Apply Now More Info

Mechanical Assembler

Hollister CA

Base Pay: 13.00

Position: Mechanical AssemblyPay Rate: $13.00/hourShift: Monday-Thursday 6:00 AM-4:30 PM,Some Friday-Saturday 5:00 AM-1:30 PM.Location: Hollister,...

Position: Mechanical Assembly
Pay Rate: $13.00/hour
Shift: Monday-Thursday 6:00 AM-4:30 PM,
Some Friday-Saturday 5:00 AM-1:30 PM.
Location: Hollister, CA

Description:
Performs various production assembly operations on components and sub-assemblies. Working under limited supervision uses visual aids, lists, and verbal and written instruction to assemble, modify, re-work or re-assemble units. Assignments are complex. Receives minimal instruction on routine work and general instructions on new assignments. May guide work of Assembler I and II. All work is performed in explosive handling areas or where explosive devices may be present.
• Follow and meet manufacturing build schedules.
• Manufacture sub-assemblies.
• Knowledge of condition and countability of sub-assemblies.
• Set-up and operate electrical test equipment.
• Must know and be able to recognize proper tooling for a specific task.
• Must be able to perform mechanical assembly and solder connections.
• Must be able to work from assembly prints, drawings and work orders.
• Train less experienced assemblers as required.
• Other functions as assigned.

Qualifications:
• Entry-level OK; minimum of 6 months’ experience preferred.
• Applicants selected will be subject to a government investigation (background screening) and must meet eligibility requirements for access to classified information. Process to be initiated immediately after transfer.
• Cross-trained in multiple operations.
• Must be able to read and understand manufacturing procedures.
• Experienced in using a variety of hand tools, measuring devices, microscope.
• General knowledge of calibration systems.
• Preferred to have basic soldering and/or welding skills.
• Strong interaction skills also required.
• Lift up to 25 lbs.

Apply Now More Info

Engineering Technician

Morgan Hill CA

Base Pay: 24

Position: Engineering Technician Salary: $22.00- $24.00/Hr. DOE Shift: 6:00am-2:30pm (M-F) Some OT Required and some Saturdays Location: Morgan Hil...

Position: Engineering Technician

Salary: $22.00- $24.00/Hr. DOE

Shift: 6:00am-2:30pm (M-F) Some OT Required and some Saturdays

Location: Morgan Hill, Ca. 

SUMMARY

In this role the individual will be responsible for Electronic, Cable Harness, and Box Build Assembly estimating activities. Ensure the accuracy and timeliness of Request for Quote (RFQ).  Need to work independently; achieve deadlines, accountable for all labor estimates from request to completion.  As a direct representative of the Company with both customers and suppliers; it is expected that the individual will conduct themselves in the utmost professional manner at all times. 

KEY DUTIES AND RESPONSIBILITIES

  • Interpret customer’s documentation and specifications
  • Define assembly process steps and traveler sequences steps
  • Review all notes and specification requirements on customer data to meet customer requirements and specifications 
  • Define and calculate charges for NRE (Non-Recurring Expense) cost of tooling or other expenses needed to build the customer product
  • Knowledge and understanding of tooling in house and tooling that can be used to reduce labor requirements 
  • Understanding the systematic process of calculating labor necessary to complete labor quoting from customer data, schematics, and other information 
  • Follow all labor quoting process steps
  • Explain and define research that creates lowest labor cost 
  • Estimating includes but is not limited to the following categories:
  • New project designs
  • Engineering projects (Design)
  • Rework – Customer and Internal
  • Ongoing re-quote processes to reduce cost
  • ECN – Engineering Change Notice
  • Responsible to identify alternate material necessary to meet and exceed customer expectations.
  • Must apply the basic mathematical formulas such as converting units of measure, fractions, percentages, ratios and proportions to practical solutions
  • Ability to define problems, collect data, establish facts and draw a valid conclusions, and root cause analysis for labor quotes that do not match actual assembly time used.
  • While performing the duties of this job, you may be asked to work the necessary hours in order to complete an urgent quote as required by the Quote Supervisor. 

QUALIFICATIONS

  • 5 years or more of hands on experience as an engineer or engineering technician in assembly, cable assembly, and electro-mechanical assembly
  • Excellent working knowledge of cable assembly, harnessing, and Electro-mechanical assemblies in a fast pace environment
  • Excellent communication skills both verbal and written
  • Knowledge and familiarity of electro-mechanical devices, electronics, test equipment, tooling, materials, and assembly techniques
  • Microsoft Office experience is required with focus on excel package 
  • Understanding of BOM structure, Assembly drawings, and specifications 
  • Must be experienced with mechanical drawings and electrical schematics
  • Extremely organized and able to consistently meet stringent deadlines for multiple RFQ’s

Apply Now More Info

Electro Mechanical Assembler

Morgan Hill CA

Base Pay: 17.00

 Position:  Mechanical Assembly Salary: $15.00- $17.00/ Hr. DOE Shift: 6:00am-2:30pm (M-F) Some OT required and some Saturdays. Location:...

 Position:  Mechanical Assembly

Salary: $15.00- $17.00/ Hr. DOE

Shift: 6:00am-2:30pm (M-F) Some OT required and some Saturdays.

Location: Morgan Hill, CA.

 

SUMMARY

Performs a wide variety of electro-mechanical assembly operations on assemblies or sub-assemblies. Determines and or follows methods and sequence of operations in performing assembly tasks.

 

KEY DUTIES AND RESPONSIBILITIES

 

  • Assembly procedures requiring adjusting, trimming and fitting parts to moderately close tolerances.
  • Verifies starting materials are adequate prior to beginning work to ensure a quality product.
  • Works from sketches or other input documents of similar complexity.
  • May make minor procedure decisions in fitting and adjusting parts, etc. but always within established guidelines.
  • Responsible for quality control of the assembled parts.
  • Proficient in assembling at least two models of machines. 
  • May recommend changes to engineering department.
  • Learns final alignments and running of machines prior to shipping.
  • Assists in training new assembly employees.
  • Responsible for quality of the finished product or services outlined above.
  • Works under general supervision.
  • Performs other duties as assigned.

 

QUALIFICATIONS

  • Familiar with a variety of concepts, practices and procedures.
  • Knowledge of reading and interpreting engineering blueprints.
  • Relies on experience and judgment to plan and accomplish goals.
  • Ability to work in a team environment.
  • Understanding of all production machine capabilities.
  • Familiar with standard concepts, practices, and procedures within a particular field.
  • Skills in using a variety of hand and power tools.

Apply Now More Info

Quality Control

Morgan Hill CA

Base Pay: 17.00

Position: Quality Control Inspector Salary: $17.00/ Hr. Shift: 6:00am-2:30pm (M-F) OT may be required and some Saturdays. Location: Morgan Hill Per...

Position: Quality Control Inspector

Salary: $17.00/ Hr.

Shift: 6:00am-2:30pm (M-F) OT may be required and some Saturdays.

Location: Morgan Hill

Perform inspections, checks, tests, and sampling procedures of incoming materials, parts and components used in the assembled jobs.

KEY DUTIES AND RESPONSIBILITIES

Produce quality work on time Insure associates observe in-line quality protocols

Execute in-line quality protocols, final QC processes, and IQC procedures

Inspect and test products per assigned work order (WO) and/or special instructions

Provide WO status to QC Inspector Team Lead

Willing to be trained on the following areas: inspection techniques, quality methodologies, and use of inspection apparatus and testing equipment

Comply with company policies and procedures

Use appropriate forms for all materials transactions such as Return to Stock, MRB, Scrap

Sustain safe and clean working environment

Performing other duties as assigned

              

QUALIFICATIONS

3 years hands-on experience in contract manufacturing industry

Possess working knowledge of inspection techniques, tools and equipment used in the inspection and testing of cable, harness, and electro-mechanical assemblies

Understand quality methodologies

Able to apply QA/QC theories to achieve actual quality goals

Able to interpret blueprints/schematics and inspect and test final products to drawings and required standards under limited supervisor and technical support

Work well with diversified Quality Assurance/Control and Manufacturing

Able to communicate effectively to QC Inspector Team Lead, Supervisor, Managers, staff and peers

Apply Now More Info
Gilroy.jpg

Staff Bios

Jesse V. Jimenez
Jesse V. Jimenez Personnel Supervisor Contact Jesse V. Jimenez
  • Started with EmployBridge August 2016, in the staffing industry for one year
  • Studies in Theology
  • December 2016 “Star of the Month”
  • ResourceMFG 101 Safety Certification, Manufacturing Certification
Chris Machado
Chris Machado Area Director Contact Chris Machado
  • Area Director of Bay Area South (Select San Jose, ResourceMFG San Jose, ResourceMFG Gilroy, Select Salinas)
  • Started with EmployBridge August 2014, four years in the staffing industry
  • Associate’s Degree
  • President’s Club 2015 Winner, Regional Sales Blitz Winner (1st place), Pacific Region Sales Contest (3rd place for highest gross profit generated), Regional Sales Contest (3rd place in new account margin), Company-Wide Sales Contest 2015 Winner (2nd place on new account points, 6th place in total new accounts, rollover bonus), Double-Digit Branch Growth 2015 Winner.
  • Baron’s Sales Training, Sales Certification, Tim Alderman Sales Training, ResourceMFG 101 Safety Certification, Manufacturing Certification
Vivian Mucha
Vivian Mucha Staffing Assistant Contact Vivian Mucha
  • Started with EmployBridge July 2017, previously in the healthcare field for two years
  • Central Coast College & Urban Training Center biblical studies and leadership development
  • Recognition for team player & outstanding leadership, Licensed Pharmacy Technician, Certified Medical Assistant, Certified pediatric/adult CPR
Jeneieve Solorzano
Jeneieve Solorzano Personnel Supervisor Contact Jeneieve Solorzano
  • Staffing Assistant January 2017- July 2017 promoted to Personnel Supervisor July 2017
  • Previous history of working in the Medical Administrative for 6 years CPR/First Aid certified
  • Mental Health Supervisor for 2 years in a Mental Health Facility of 46 patients
  • Recruiting industry for 2 years
  • Certified Assessor for ResourceMFG Assessment Station