Questions? 1-877-404-8449

Branch No: 31011-5978
5201 N. Beach Street
Suite 141
Fort Worth, TX 76137
Phone: (817) 345-0620

Available Positions

17 positions available.

Machine Operator

Fort Worth TX

Base Pay: 13.50 per HOUR

National company needs Machine operator/floater for 3rd shift Sunday - Thursday 10:00pm-6:00am Pay rate $13.50 hr Follow directions from...

National company needs Machine operator/floater for 3rd shift

Sunday - Thursday 10:00pm-6:00am

Pay rate $13.50 hr

  • Follow directions from drawings, standard work and work instructions.
  • Identify any special instructions or customer requirements on packaging and length of tubing
  • Set up computer SPC Program (training required)
  • Machine setup & operation for all operations in Melts Value Stream: Heat Shrink, Steam Expansion, Extrusion, Clean Room, Etch, etc.
  • Follow Clean Room protocol. 
  • Understand the secondary operations and inspection process (cross training)
  • Identify non-conformities relating to product, process, and the quality system
  • Proper use of measuring devices (measurement training required)
  • Make labels for tubing and properly complete production reports (per work instructions)
  • Adhere to quality standards and guidelines. Maintain accurate records

Apply Now More Info

CNC Lathe Machinist

Arlington TX

Base Pay: 16.00 per HOUR

Large manufacturer in South Arlington looking for experienced CNC Lathe Machinist. Must be able to set-up and make minor adjustments. Must be able...

Large manufacturer in South Arlington looking for experienced CNC Lathe Machinist.

  • Must be able to set-up and make minor adjustments.
  • Must be able to quality check own parts and maintain tight tolerances.
  • Wonderful machine shop that is clean and climate controlled.
  • Great benefits once converted to employee status.
  • Use your own tools if you have them or you can use company tools.

Apply Now More Info

CNC Set Up Machinist

Arlington TX

Base Pay: 14.00 per HOUR

High volume production shop in new location in Arlington needs CNC set up machinist. 1st shift-Monday - Friday 6am-2:30pm Pay rates-$14.00 Must be...

High volume production shop in new location in Arlington needs CNC set up machinist.

1st shift-Monday - Friday 6am-2:30pm

Pay rates-$14.00

  • Must be able to set up and run a lathe and mill
  • must be able to run more than 1 machine at the same time.
  • Must be able to program.

Apply Now More Info

Industrial Painter

Weatherford TX

Base Pay: 15.00 Minimum 17.00 Maximum per HOUR

Industrial Painter needed for busy large tool manufacturer in Weatherford. Involves prep and masking, prime, and top coat operations. Ability to v...

Industrial Painter needed for busy large tool manufacturer in Weatherford.

  • Involves prep and masking, prime, and top coat operations.
  • Ability to verify completeness, accuracy and compliance to work instructions.
  • PAY RATES: $15-$17

Apply Now More Info

Production Support Analyst

Weatherford TX

Base Pay: 15.00 Minimum 17.00 Maximum per HOUR

Production Control Expert needed for busy manufacturer in Weatherford. Staging and sequencing of work flow, including accessing work order travele...

Production Control Expert needed for busy manufacturer in Weatherford.

  • Staging and sequencing of work flow, including accessing work order travelers, work instructions, drawings.
  • Attention to detail and documentation. 

PAY RATES: $15-$17 

Apply Now More Info

Quality Control

Weatherford TX

Base Pay: 14.00 Minimum 18.00 Maximum per HOUR

Quality Assurance Inspector needed for fast paced tool manufacturer in Weatherford. PAY RATE $14-18 1st shift Monday - Friday 6:30a - 4:00p  ...

Quality Assurance Inspector needed for fast paced tool manufacturer in Weatherford.

PAY RATE $14-18

1st shift Monday - Friday 6:30a - 4:00p

 

  • Quality Control Inspector experienced in an ISO9001 manufacturing environment.
  • Must be proficient in dimensioning and documentation utilizing manual and CMM instruments.
  • Ability to verify completeness, accuracy and compliance to work instructions.

Apply Now More Info

ADM – Admin

Arlington TX

Base Pay: 14.00 per HOUR

Clerical / Admin Assistant for location in Arlington. Schedule: Monday - Friday 7am-4pm Pay Rate: $14.00 hr Primary Duties: Answering phones and g...

Clerical / Admin Assistant for location in Arlington.

Schedule: Monday - Friday 7am-4pm

Pay Rate: $14.00 hr

Primary Duties:

  • Answering phones and greeting customers
  • Building great relationships with local and regional residential contractors and builders
  • Flawless order entry and processing
  • Detailed follow up and resolution of customer requests
  • Assisting warehouse personnel with inventory and cycle counts. 

Apply Now More Info

Machine Operator

Fort Worth TX

Base Pay: 13.50 per HOUR

Machine operators needed for immediate Start Schedule - Monday-Friday 6am to 2:30pm Pay Rate $13.50hr Shared responsibility for finished goods mee...

Machine operators needed for immediate Start

Schedule - Monday-Friday 6am to 2:30pm

Pay Rate $13.50hr

  • Shared responsibility for finished goods meeting or exceeding customer expectations
  • Understand the expansion and inspection process (training required)
  • Monitor tube within heater for signs of expansion
  • Check and verify production information
  • Prepare for upcoming jobs
  • Machine setup and operation
  • Identify materials for each job
  • Load material into machines
  • Sets wall on tubing by using calipers and other measuring devices
  • Make labels for tubing and properly complete production reports
  • Proper use of measuring devices (measurement training required)
  • Follow directions from drawings, standard work and work instructions
  • Adhere to quality standards and guidelines. Maintain accurate records
  • Maintain work area in clean and orderly fashion, follow 5S practices
  • Report production issues to Value Stream Team Leader

Apply Now More Info

Quality Control Supervisor

Arlington TX

Base Pay: 19.00 per HOUR

Quality Control/Quality Assurance Supervisor needed for 1ST SHIFT in new Arlington tool shop. Responsibilities: Plans, coordinates, and directs qu...

Quality Control/Quality Assurance Supervisor needed for 1ST SHIFT in new Arlington tool shop.

Responsibilities:

  • Plans, coordinates, and directs quality control program designed to ensure continuous production of products consistent with established standards
  • Develops and analyzes statistical data and product specifications to determine present standards and establish proposed quality and reliability expectancy of finished product.
  • Formulates and maintains quality control objectives and coordinates objectives with production procedures in cooperation with shop supervisors to maximize product reliability and minimize costs.
  • Directs, through intermediate personnel, workers engaged in inspection and testing activities to ensure continuous control over materials, facilities, and products.
  • Plans, promotes, and organizes training activities related to product quality and reliability.
  • Performs complete layout inspection by measuring dimensions, such as length, height, and distance, between reference points, using precision instruments such as micrometers, calipers, dial indicator, and CMM, to ensure product meets specifications.
  • Performs verification on Incoming, In-Process, and Outgoing products.
  • Visually compares work pieces against one another to assess/detect manufacturing variations in processes.
  • Assists and/or trains operators on part visual acceptability, and measurement and process procedures as required.
  • Reports quality problems or findings to the President and follows up to ensure that corrective action has/will take place.
  • Maintains record of inspections and prepares list of defects, interacts with other  departments to ensure compliance with specification and to facilitate the acceptance of parts
  • Relates issues to customers, suppliers, and internal employees.
  • Trouble shooting skills paramount to problem solving methodology.
  • Use of and implementation of statistical tools such as X-R charts and analysis of the same, desired

Apply Now More Info

Machine Operator

Fort Worth TX

Base Pay: 11.00 per HOUR

Machine operator to place Velcro on cushions per blue prints with no more than 1 error per 2000 pieces. Schedule: Monday -Friday 6:30am - 3:30pm P...

Machine operator to place Velcro on cushions per blue prints with no more than 1 error per 2000 pieces.

Schedule: Monday -Friday 6:30am - 3:30pm

Pay Rate - $11.00

  • Pulls work orders at the beginning of the shift and throughout the shift as needed
  • Runs Velcro through glue machine
  • Sets machine up for new molds
  • Marks cushions for Velcro High School Diploma or GED
  • Mechanical aptitude to perform machine set up.

Apply Now More Info

Service Technician

Fort Worth TX

Base Pay: 18.00 per HOUR

Do you have strong mechanical knowledge?  Great at seeing solutions and repairing malfunctioning equipment?  Service technician needed fo...

Do you have strong mechanical knowledge?  Great at seeing solutions and repairing malfunctioning equipment?  Service technician needed for manufacturer servicing the auto service industry.

Shift Schedule - Monday - Friday 7am - 5pm

  • Strong candidate would have experience with hydraulics, problem solving, mechanical maintenance, industrial electrical or welding.
  • Must be able to troubleshoot equipment malfunctions and resolve issues.
  • Work independently and portray professional integrity in front of clients.
  • Would possibly need to work at heights.
  • Able to lift 45 lbs.
  • Good driving record required.
  • Would travel to various customer locations to troubleshoot and repair equipment malfunctions. 
  • Great company benefits with quarterly and yearly bonus plans. 
  • Immediate hire for the right candidate.  

Apply Now More Info

Installation Technician

Fort Worth TX

Base Pay: 16.00 per HOUR

Install technician needed for large supplier in Auto service industry. Shift schedule: 7AM - 5PM Monday through Friday with some possible ove...

Install technician needed for large supplier in Auto service industry.

Shift schedule: 7AM - 5PM Monday through Friday with some possible overtime on weekends if necessary

  • Qualified candidates must have very strong mechanical aptitude.
  • Previous experience in hydraulics, welding, electrical, auto repair or HVAC has proven to be beneficial.
  • Would be installing new equipment in auto service bay locations per design drawings and specifications.
  • Would need to be willing to travel as needed.
  • Would need to be able to work at heights on scissor lift installing hose and pulling cables, lift up to 45 lbs, read blueprints and schematics.
  • Must be dependable with good work ethic and work record.
  • Very strong company with great benefits.
  • Position open for immediate hire. 
  • Generous quarterly bonuses for good work record. 

Apply Now More Info

CNC Operator

North Richland Hills TX

Base Pay: 0.00 per HOUR

Aerospace manufacturer in the Fort Worth area, that's in the need for night shift CNC Operator. Monday - Thursday 4p- 4:30a Pay rate $12 - $15...

Aerospace manufacturer in the Fort Worth area, that's in the need for night shift CNC Operator.

Monday - Thursday 4p- 4:30a

Pay rate $12 - $15

  • General maintenance checks on machines
  • Complete PM and micrometer verification logs
  • Inspect and measure major dimensions of parts on a minimum of every 5th piece of each lot machined
  • Perform First Article Inspection on all production orders
  • Complete daily log of jobs in appropriate software
  • Maintain an organized and clean work environment
  • Select, install, and adjust correct tooling and program to run parts
  • Perform turning, drilling, tapping, and deburring operations
  • Adhere to all personnel safety precautions
  • Exposure to different types of chemicals, acids, fumes, etc.
  • Moving mechanical parts and vibration
  • overtime available

Apply Now More Info

CNC Set Up Machinist

Arlington TX

Base Pay: 0.00 per HOUR

High volume production shop in new location in Arlington needs CNC set up machinist. 2nd shift-Monday - Friday 2 pm-10:30 pm Pay rates: $13.00-$15....

High volume production shop in new location in Arlington needs CNC set up machinist.

2nd shift-Monday - Friday 2 pm-10:30 pm

Pay rates: $13.00-$15.00

  • Must be able to set up and run a lathe and mill
  • must be able to run more than 1 machine at the same time.
  • Must be able to program.

Apply Now More Info

Welder

Weatherford TX

Base Pay: 16.00 per HOUR

Welder MIG and TIG experience required for this fast paced aerospace manufacturer in the Weatherford, TX area. 1st Shift: Monday - Friday 6 AM - 4:...

Welder MIG and TIG experience required for this fast paced aerospace manufacturer in the Weatherford, TX area.

1st Shift: Monday - Friday 6 AM - 4:00 PM

Pay Rates: $16.00-$18.00

Responsibilities:

  • Able to read prints, layout, fit, check, and weld in multiple positions.
  • Compensation range based on ability and experience.
  • Health, dental and optical insurance coverage available upon conversion to full time employee.
  • PAY RATES: $16-$18

Apply Now More Info

CNC Operator

Weatherford TX

Base Pay: 0.00 per HOUR

CNC Machine Operators needed for extremely busy large tool manufacturer located in the Weatherford, TX area. 1st Shift: Monday - Friday  Pay R...

CNC Machine Operators needed for extremely busy large tool manufacturer located in the Weatherford, TX area.

1st Shift: Monday - Friday 

Pay Rate: $14.00 - $16.00 

  • Experienced CNC mill and/or lathe operator.
  • Able to read prints and work orders, set up, and check.
  • Attention to detail and ability to work independently.
  • Compensation range based upon ability and experience.
  • Health, dental and optical insurance coverage available upon conversion to full time employee

Apply Now More Info

Foreman/Supervisor

Fort Worth TX

Base Pay: 0.00 per HOUR

Large company relocated from California needs CNC shop foreman 10+ CNC machinists in department Must be familiar with CNC set up/programmer Must kn...

Large company relocated from California needs CNC shop foreman

10+ CNC machinists in department

Must be familiar with CNC set up/programmer

Must know Haas - FANUC code

Company will provide additional training

Apply Now More Info
ft worth.jpg

Staff Bios

Jana Coyle
Jana Coyle Business Development Manager Contact Jana Coyle
  • Started with the company July 2015, 18 years manufacturing experience
  • West Texas State University – Business Ad/Accounting
  • Member of E3, VSDA,
  • Top 500 Entrepreneur of the Year
  • New Employee training, Barron Group Sales Training, ResourceMFG 101 training
Brandon Holbert
Brandon Holbert Branch Manager Contact Brandon Holbert
  • Started with company February 2016
  • B.A. Degree at Stephen F. Austin University – Business Administration / Management
  • New Employee Training; ResourceMFG 101 Manufacturing Certification; ResourceMFG 101 Safety Certification  
Live Chat