Questions? 1-877-404-8449

Branch No: 81953
7595 Anagram Drive
Eden Prairie, MN 55344
Phone: (952) 474-1900

Available Positions

9 positions available.

CNC Operator

Minneapolis MN

Base Pay: 22.49 per HOUR

Now Hiring in Bloomington Minnesota for A CNC set up Machine Operator  1st shift paying 22.49 Dollars an hour Weekly Pay Every...

Now Hiring in Bloomington Minnesota for A CNC set up Machine Operator 

1st shift paying 22.49 Dollars an hour

Weekly Pay Every Friday!

  • You will Receive instructions from shop orders, prints, engineering standards or verbally from supervisor

  • Set up CNC bending machine, install pressure die, clamping die and bending form (shoe).

  • Adjust tension clamp on a CNC machine 
  • Set stop or may set several stops according to specifications.
  • Install and adjust mandrel on a CNC machine 
  • Review first piece and check according to print.
  • Make necessary adjustments on a CNC machine
  • Set up and operate mechanical benders.
  • May bend tubing on hand bending machine.
  • Set up and operate to straighten, cut, flare and swage tubing.
  • Set up and operate Bliss punch press, small mechanical punch press, or X-tru punch to punch holes in header tube per specifications.
  • Set up end closer machine by using micrometer to set proper depth, installing appropriate collar, and setting speed depending on tube size.
  • Operate machine to close end of header tube.
  • Set up and operate T-drill to drill extrusion hole in tubes per specifications.
  • Adjust T-drill opener as required.
  • Set up and operate stub tube machine by installing proper fixtures for length and angle, adjusting stroke for tube pusher, and installing correct end former to bead tubes, bend tubes, etc.
  • Place tubes on cart and move to DE-greaser.
  • Utilize equipment to wash and deburr tubes.
  • Set up and operate cross cut saw to cut tubes to length for stub tube machine.
  • Change mandrels and blocks, set micro switches for angle of bend, position saw for length of cutoff and sharpen saw blades on saw sharpener as needed.
  • Check work periodically per standards.
  • Check grease and lubrication on machines used.
  • Clean off excess grease and dirt.

 

Apply Now More Info

Plate Prep Operator

Osseo MN

Base Pay: 15.00 per HOUR

ResourceMFG is hiring in the Maple Grove area for a Warehouse  Machine Operator, operating a Plating Machine.  Experience worki...

ResourceMFG is hiring in the Maple Grove area for a Warehouse  Machine Operator, operating a Plating Machine.  Experience working with circuit boards is a plus

Paying 15.00 dollars an hour  

Hours Weekend 6 am to 6:30 pm Friday to Sunday 12 hours Shifts

Plating Operator DUTIES AND RESPONSIBILITIES:

  • Check job jacket for requirements and priority, calculate amp requirements and plug holes if necessary.
  • Transport panels to clamping table and clamp according to circuit design and process boards through cleaning line and check holes.
  • Process boards through copper plating line, adjusting rectifier according to panel size and type inspecting boards during processing.
  • Process boards through solder line and unplug holes.
  • Inspect hole sizes with pin gauges.
  • Provide lab with panel samples when needed.
  • Clean tanks, bars, clamps and electrical connections.
  • Add copper nuggets and chemicals when needed. Notify lab when brightener is needed for copper bath.
  • Maintain job jacket, daily production log and logs of measurements, control charts, chemical additions, amp hour log and other maintenance info.
  • Monitor temperature and appearance of baths. Monitor copper-to-copper adhesion.
  • Strictly follow all EPA requirements. Discuss any question concerning chemical safety, handling EPA requirements with supervisor or manager. 

Apply Now More Info

Machine Operator

Shakopee MN

Base Pay: 16.00

Entry Level Machine Operators needed in Shakopee Minnesota for immediate start. You will start as a production worker and then move into the M...

Entry Level Machine Operators needed in Shakopee Minnesota for immediate start. You will start as a production worker and then move into the Machine Operator role within a few weeks. 

Production Starting Pay

1st shift paying 14.00 Dollars an hour.    Monday-Thursday 5am to 5pm

2nd shift 15.00 Dollars an hour.   Monday-Thursday 5pm to 5am

3rd shift 16.00 Dollars an hour.  Friday-Sunday 5am to 5pm

4th shift 16.00 Dollars an hour.   Friday-Sunday 5pm to 5 am

Machine Operator pay once you move into this role

1st shift 15.00 Dollars

2nd and 3rd shift 16.00 Dollars

4th shift 17.00 Dollars

Job Duties

  • Work in the bindery area of books or cards primarily dealing with product creation via hand work
  • Clean the warehouse as needed
  • Attention to details
  • Production worker
  • Operate equipment equivalent to stickers and smashers
  • Performs Quality Assurance checks and prepares work for the next operation
  • Maintain safety and OSHA standards
  • Timely execution of assigned tasks
  • Responsible for cleanliness of area 

 

Apply Now More Info

Plate Prep Operator

Osseo MN

Base Pay: 15.00 per HOUR

ResourceMFG is hiring in the Maple Grove area for a Plating Operator specific to electronic circuit boards Paying 15.00 dollars an hour&n...

ResourceMFG is hiring in the Maple Grove area for a Plating Operator specific to electronic circuit boards

Paying 15.00 dollars an hour  

Hours 1 pm to 9:30 pm 

Job details

  • Check job jacket for requirements and priority, calculate amp requirements and plug holes if necessary.
  • Transport panels to clamping table and clamp according to circuit design and process boards through cleaning line and check holes.
  • Process boards through copper plating line, adjusting rectifier according to panel size and type inspecting boards during processing.
  • Process boards through solder line and unplug holes.
  • Inspect hole sizes with pin gauges.
  • Provide lab with panel samples when needed.
  • Clean tanks, bars, clamps and electrical connections.
  • Add copper nuggets and chemicals when needed. Notify lab when brightener is needed for copper bath.
  • Maintain job jacket, daily production log and logs of measurements, control charts, chemical additions, amp hour log and other maintenance info.
  • Monitor temperature and appearance of baths. Monitor copper to copper adhesion.
  • Strictly follow all EPA requirements. Discuss any question concerning chemical safety, handling EPA requirements with supervisor or manager. 
  • Equipment used: Eye protection, gloves, apron, boots, calculator, plating racks, clamps, timers, chemical baths, rectifiers, pin gauges.

Apply Now More Info

Machine Operator

Saint Paul MN

Base Pay: 14.80 per HOUR

ResourceMFG is hiring Food Production Workers for Saint Paul/Eagan Mn. Starting Pay is 14.80 dollars and up. (Will pay more for...

ResourceMFG is hiring Food Production Workers for Saint Paul/Eagan Mn.

Starting Pay is 14.80 dollars and up. (Will pay more for associates with food production experience).

Hours 2nd shift M-Th 4pm to 2am


Responsible for operating various types of packaging equipment in accordance with process and quality standards so as to meet production schedules assigned.

Job Responsibilities:

  • Responsibility includes the management of activities for the safety, integrity, legality and quality of the food products.
  • Operates various processing or packaging equipment.
  • Ensures proper materials are being used and documented with accuracy (ex: labels, paper, bags and fillings)
  • Ensure proper disposal of product rejected by metal detector and document occurrences. 
  • Properly assemble materials and equipment for changeovers. 
  • Follow all safety procedures and participate in safety training.
  • Support and comply with all quality management systems.

Knowledge/Competencies:

  • While performing the duties of this job, the employee is regularly required to talk and hear.
  • The employee frequently is required to stand for a prolonged time, walk and sit.
  • The employee must occasionally lift and/or move up to 50 pounds.
  • Specific vision abilities by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to focus.

 

Apply Now More Info

Medical Assembly

Saint Paul MN

Base Pay: 14.00 per HOUR

Hiring for Medical Devise Assembly in Saint Paul MN. Hours: Monday to Thursday 5am to 3:30pm Pay: 14.00 dollars an hour Temp to Hire ...

Hiring for Medical Devise Assembly in Saint Paul MN.

Hours: Monday to Thursday 5am to 3:30pm

Pay: 14.00 dollars an hour Temp to Hire 

Benefits include:

  • Free food, snacks, tea, coffee, fruit, breakfast, chips etc.
  • Great benefit when hired on after temp contract is met
  • Big full-size gym on campus free to use

Job Responsibilities:

  • The position requires a highly motivated, positive individual that can work both independently and in a “team” environment.
  • Assembly Technician employees will be expected to perform all job duties in the areas they are assigned under basic supervision.
  • They will stay on task and complete quality work with accurate documentation. He/she will be a valuable and trustworthy asset to their work area through quality work of trained processes.
  • Medical devise assembly of catheter's 
  • Great Attention to detail
  • Use of microscopes

Apply Now More Info

Brazer

Minneapolis MN

Base Pay: 18.00 per HOUR

Now Hiring experienced Brazer and solderer for the Bloomington, MN!!!! Pay 18.00 dollars an hour Hours 7am to 3:30pm Receive instructions...

Now Hiring experienced Brazer and solderer for the Bloomington, MN!!!!

Pay 18.00 dollars an hour

Hours 7am to 3:30pm

Receive instructions from Shop Order, from print, from supervisor and from production instruction sheet.

Check print for dimensions, angle of fittings, tubing, etc. assemble parts to be soldered, using fixture if necessary. Place completed assembly on bench turntable, on work bench, in jig or vise. Perform soldering operation. Inspects own work.

 

Materials to be brazed are copper to copper, copper to brass, copper to steel.

 

Dip some work pieces in water tank after soldering. May remove flux by hand. Make repairs of silver solder joints in final assembly.

 

Apply Now More Info

Production Associate

Saint Paul MN

Base Pay: 14.00 - 15.00

Now hiring Entry Level Production Assembly workers in St Paul Minnesota 1st and 2nd shifts available Paying 14.00 to 15.00 dollars an hour dependin...

Now hiring Entry Level Production Assembly workers in St Paul Minnesota

1st and 2nd shifts available

Paying 14.00 to 15.00 dollars an hour depending on the shift you work

Job Duties

  • Basic production assembly
  • Measuring and cutting
  • Staging material for production
  • Light assembly
  • Training provided

 

 

Apply Now More Info

Assembler

Saint Paul MN

Base Pay: 14.00 - 16.00

Experienced Catheter Assemblers needed in St Paul Minnesota paying up to 16.00 dollars an hour This position performs a variety of complex medical...

Experienced Catheter Assemblers needed in St Paul Minnesota paying up to 16.00 dollars an hour

This position performs a variety of complex medical assembly and processing tasks as a production team member, including performing all technical assembly tasks. 

• Catheter assembly

• Logging in record of raw materials

• Tipping, roll cutting, cutting to length

• Cutting of braid and pulling liner

• Ensures that product assembled meets quality standards

• Performs other related assembly & processing tasks, as required.

Qualifications and Education Requirements

• High school graduate or equivalent preferred

• Must be able to read and comprehend blueprints 

• Working in a medical device manufacturing 

• Good communication skills

• Ability to follow instructions

• Ability to perform repetitive tasks well Physical Job Requirements

• Required to sit at a clean room environment assembling medical catheters 

• Ability to visually check work performed and check whether product has been assembled correctly

Apply Now More Info

Staff Bios

Dan Webinger
Dan Webinger Branch Manager Contact Dan Webinger
  • Started with the company March 2019, 14 years in the industry
  • Augsburg College
  • Certified Staffing Professional (CSP)
Nik Boese
Nik Boese Personnel Supervisor (Recruiter) Contact Nik Boese
  • Started with Employbridge April 2019, Experienced Staffing Manager with a demonstrated history of working in the staffing and recruiting industry. Skilled in Sales, Team Building, Management, Account Management, and Leadership
  • Minnesota State University, Mankato
Clint Wilhelmi
Clint Wilhelmi Personnel Supervisor Contact Clint Wilhelmi
  • Started with the company February 2019, one year in the industry
  • MCTC / Met State Univ (St. Paul, MN)
  • Rotary Club of Eden Prairie, Knight of Columbus est. 2006