COVID-19 Updates and Resources Click here to read more.

close

Questions? 1-877-404-8449

Branch No: 30060
4570 Ivy Street
Unit B-300
Denver, CO 80216
Phone: (303) 534-1316

Available Positions

26 positions available.

Assembler

Broomfield CO

Base Pay: 14.50 per HOUR

Working on the initial assembly of our awning products. Must be able to lift 30-40 pounds consistently through an 8 hour shift, plus an additional...

Working on the initial assembly of our awning products. Must be able to lift 30-40 pounds consistently through an 8 hour shift, plus an additional 1-2 hours if needed for overtime.

Apply Now More Info

Quality Control Inspector

Golden CO

Base Pay: 17.20 per HOUR

We are seeking a 2nd shift Quality Inspector for a ceramics manufacturer in Golden. This is a temp to hire position that offers weekly pay and bene...

We are seeking a 2nd shift Quality Inspector for a ceramics manufacturer in Golden. This is a temp to hire position that offers weekly pay and benefits! 

Pay starts at $17.20/hr

Shift - Monday - Friday 3:30 pm - 10:30 pm

As the Quality inspector, you will be responsible for in-process inspection of product utilizing basic measuring tools. 

Quality Inspector Duties:

  • Inspect product, either green or fired, using basic measuring equipment such as micrometer, caliper, drop gauge, etc. to determine if product meets quality/ customer specifications
  • Isolate non-conforming product per procedures and refer to appropriate person for disposition of product (re-work or scrap) when needed
  • Document inspection results via logs and reports, input into appropriate computer database
  • Stack and transport product via hand-truck, pallet jacks, forklift, crane, or hoist
  • Clean work area, machines, tools and equipment
  • Wears required personal protective equipment at all times in areas where mandatory 

Apply Now More Info

Maintenance Mechanic

Golden CO

Base Pay: 19.00 per HOUR

We are seeking a maintenance mechanic for a ceramic production facility located in Golden! Pay - $18-19/hr 1st shift Monday - Friday 6 am - 3 pm...

We are seeking a maintenance mechanic for a ceramic production facility located in Golden!

Pay - $18-19/hr

1st shift Monday - Friday 6 am - 3 pm

Duties include:

  • Diagnose and repair, with or without schematic or manual, complex manufacturing or facility equipment; communicate and offer solution for maintenance challenges to appropriate person
  • Perform internal and external facility equipment or building maintenance such as HVAC, painting, plumbing, welding etc.
  • Perform preventative maintenance such as changing coolants, lubricants or filters, following a set schedule
  • Troubleshoot problematic manufacturing or facility equipment, recommend permanent solution to appropriate leader 
  • Train and coach incoming mechanics and maintenance associates on department work instructions, processes, and procedures
  • Wears required personal protective equipment at all times in areas where mandatory 

Apply Now More Info

Facility Maintenance Tech

Golden CO

Base Pay: 16.75 - 19.00

We are seeking a Facility Maintenance tech for a manufacturing facility located in Golden. Qualified candidates will have at least 6 months of rece...

We are seeking a Facility Maintenance tech for a manufacturing facility located in Golden. Qualified candidates will have at least 6 months of recent custodial experience. 

1st shift - 6 am - 3 pm Monday - Friday

Pay - $16.75-19.00/hr

Duties include:

  • Maintain cleanliness of facility areas including restrooms, lunchrooms, offices, and halls by sweeping, mopping, vacuuming, emptying trash etc.
  • Perform minor facility maintenance such as replacing lightbulbs, painting, replacing filters, etc.
  • Maintain facility exterior by clearing walks, emptying trash receptacles etc.
  • Maintain and inventory cleaning supplies, request restock when needed 
  • Wears required personal protective equipment at all times in areas where mandatory 

Apply Now More Info

Production Worker / General Labor

Denver CO

Base Pay: 16.00 - 17.20

We are seeking Production Workers / General Laborers for a Ceramic production facility located in the Golden / Lakewood area! These are temp to hir...

We are seeking Production Workers / General Laborers for a Ceramic production facility located in the Golden / Lakewood area! These are temp to hire positions that offer weekly pay and benefits and offer tremendous room for growth! 

Qualified candidates must have experience operating a forklift as well as stepping off the lift to assist with other responsibilities in the manufacturing facility. 

Shifts - 

  • 1st shift - Monday - Friday 6 am - 2:30 pm 
  • 2nd shift - Monday - Friday 2:30 pm - 10:30 pm 
  • 3rd shift - Monday - Friday 8 pm - 6 am 

Pay - $16-17.20/hr - based on experience

Duties include:

  • Loading materials into kiln and unloading kiln 
  • Operating machinery
  • Utilizing a computer system for tracking
  • Using hand scales
  • Operating forklift 
  • Material handling

#rmfgindeed

 

Apply Now More Info

Material Handler Forklift -2nd shift

Golden CO

Base Pay: 17.20 per HOUR

We are seeking 2nd shift Material Production Workers / Forklift Operators for a Ceramic production facility located in the Golden / Lakewood area!...

We are seeking 2nd shift Material Production Workers / Forklift Operators for a Ceramic production facility located in the Golden / Lakewood area! These are temp to hire positions that offer weekly pay and benefits and offer tremendous room for growth! 

Qualified candidates must have experience operating a forklift as well as stepping off the lift to assist with other responsibilities in the manufacturing facility. 

2ND shift - Monday - Friday 2:30 pm - 10:30 PM

Pay - $16-17.20/hr - based on experience

  • Loading materials into kiln and unloading kiln 
  • Operating machinery
  • Utilizing a computer system for tracking
  • Using hand scales
  • Operating forklift 
  • Material handling

Apply Now More Info

Production Worker Material Handler

Golden CO

Base Pay: 16-17.20

We are seeking 1st shift Production Operators for a ceramic production facility located in the Golden / Lakewood area! These are temp to hire...

We are seeking 1st shift Production Operators for a ceramic production facility located in the Golden / Lakewood area! These are temp to hire positions that offer weekly pay and benefits and offer tremendous room for growth! 

1st shift - Monday - Friday 6 am -2:30 pm 

Pay - $16-17.20/hr based on experience

Production Operator Duties include:

  • Operate multiple basic production machines and/or a single complex, technical production equipment to manufacture parts in compliance with work order instructions; makes machine adjustments and contacts appropriate person when needed 
  • Inspects parts to determine if product meets quality/ customer specifications and takes appropriate action concerning parts that are not to customer/quality standards • Transfers parts to next process via computer software
  • Loads, unloads and stacks product; transports product via hand-truck, forklift, crane, or hoist
  • Cleans work area, machines, tools and equipment 

 

Apply Now More Info

Production Operator II

Golden CO

Base Pay: 17.20 per HOUR

We are seeking Production Operators for a ceramic production facility located in the Golden / Lakewood area! These are temp to hire positions...

We are seeking Production Operators for a ceramic production facility located in the Golden / Lakewood area! These are temp to hire positions that offer weekly pay and benefits and offer tremendous room for growth! 

2nd shift -  Monday - Friday 2:30 pm - 10:30 pm 

Pay - $16-17.20/hr based on experience

Production Operator Duties include:

  • Operate multiple basic production machines and/or a single complex, technical production equipment to manufacture parts in compliance with work order instructions; makes machine adjustments and contacts appropriate person when needed 
  • Inspects parts to determine if product meets quality/ customer specifications and takes appropriate action concerning parts that are not to customer/quality standards • Transfers parts to next process via computer software
  • Loads, unloads and stacks product; transports product via hand-truck, forklift, crane, or hoist
  • Cleans work area, machines, tools and equipment 

 

Apply Now More Info

Production Operator - 3rd shift

Golden CO

Base Pay: 17.20 per HOUR

We are seeking 3rd shift Production Operators in Golden!  Pay - $17.20/hr based on experience Shift - Monday - Friday 8 pm - 6 am  Produc...

We are seeking 3rd shift Production Operators in Golden! 

Pay - $17.20/hr based on experience

Shift - Monday - Friday 8 pm - 6 am 

Production Duties:

  • Operate multiple basic production machines and/or a single complex, technical production equipment to manufacture parts in compliance with work order instructions; makes machine adjustments and contacts appropriate person when needed
  • Inspects parts to determine if product meets quality/ customer specifications and takes appropriate action concerning parts that are not to customer/quality standards
  • Transfers parts to next process via computer software
  • Loads, unloads and stacks product; transports product via hand-truck, forklift, crane, or hoist 
  • Cleans work area, machines, tools and equipment

 

Apply Now More Info

Entry Level Production

Aurora CO

Base Pay: 15.75-16.50

We are seeking entry level Machine Operators and Production Workers for a circuit board manufacturing company in Aurora.  These are entry leve...

We are seeking entry level Machine Operators and Production Workers for a circuit board manufacturing company in Aurora. 

These are entry level positions that offer training and tremendous room for growth! 

2nd shift - $15.75- 16.50/hr

 Open Positions available in the following departments - 

  • Plating -  You will be trained on how to start up, operate, and shut down Plating Department equipment as well as to learn how to perform routine maintenance.
  • Mechanical / Machine operation - changing drill and router bits, setting up production stations, laying up new panels as required, checking and loading the mechanical CNC programs, setting up different tooling, etc., operating few different machines, and filling out all logs required, and required housekeeping and general maintenance.
  • Image - operation of laminators, developers, and inspection of panels. 
  • Test programming - testing each individual part, by various testing equipment, and certifying compliance to requirements. 

 

Apply Now More Info

Quality Control

Aurora CO

Base Pay: 15.75 per HOUR

We are seeking quality control inspectors for a circuit board manufacturer in Aurora. Pay - $15.75 /hr - may pay more based on experience 2nd shift...

We are seeking quality control inspectors for a circuit board manufacturer in Aurora.

Pay - $15.75 /hr - may pay more based on experience

2nd shift - 2 pm - 10:30 pm 

Duties include:

  • Handling and Preparation—verify traveler data/panel count, clean panels if necessary, and start up the Ionograph equipment.
  • Mechanical aptitude and good vision for section preparation and reading.
  • Inspection—inspect boards for part number/revision letter, repeat defects, UL marking/code, material type/thickness, line width/air gap, image quality, plating quality, missing/extra holes, hole sizes, hole wall quality, registration, tin strip, adhesion, solder, solder mask, legend, and mechanical specifications per the appropriate work instructions.
  • Paperwork—read/fill out Process Travelers, Final Inspection logs, certificates, perform data entry, and learns how to generate First Article Reports.

Tools used for inspection include:

  • 10x eye loupe
  • Exacto knife
  • 60x tower scope
  • calculator
  • calipers
  • back light table
  • micrometer
  • Section grind
  • table equipment
  • Ionograph 

Apply Now More Info

Production Worker - all shifts

Aurora CO

Base Pay: 15.45-16.75

ResourceMFG has an immediate temp to hire openings in Aurora for a Circuit board manufacturer. This is an essential business so no fear of shut dow...

ResourceMFG has an immediate temp to hire openings in Aurora for a Circuit board manufacturer.

This is an essential business so no fear of shut downs.  We can start you ASAP.

1st, 2nd and 3rd shifts available

Pay - $15.45-16.75/hr -- can pay more based on experience.

You will be trained on how to operate equipment and machinery used for circuit boards. 

#rmfgindeed

Apply Now More Info

Production Worker

Aurora CO

Base Pay: 15.45-16.50

We are seeking production workers  for a circuit board manufacturing company in Aurora.  These are entry level Production positions that...

We are seeking production workers  for a circuit board manufacturing company in Aurora. 

These are entry level Production positions that offer training and tremendous room for growth! 

1st, 2nd and 3rd shifts available

Pay - $15.45-16.50/hr - can pay more based on experience. 

 Duties include:

  • Trained on how to turn on tank heaters and bring the fluid levels up
  • Trained on how to handle acids and caustics
  • Trained on how to read/fill out  logs and charts
  • Trained on how to inspect his/her own work

 

 

Apply Now More Info

Machine Operator

Aurora CO

Base Pay: 15.45-16.50

We are seeking a CNC Drill operators for a circuit board manufacturer in Aurora. Qualified candidates will have machine operating experience. ...

We are seeking a CNC Drill operators for a circuit board manufacturer in Aurora. Qualified candidates will have machine operating experience. 

1st, 2nd and 3rd shifts available

Pay - $15.45-16.50/hr - can pay more  based on experience.

You will be responsible for assembling different operations according to their respective process procedures using a CNC drill. You will be trained on how to start up, operate, and shut down Mechanical Department equipment as well as to learn how to perform routine maintenance. These include but are not limited to changing drill and router bits, setting up production stations, laying up new panels as required, checking and loading the mechanical CNC programs, setting up different tooling, etc., operating few different machines, and filling out all logs required, and required housekeeping and general maintenance. 

Apply Now More Info

Industrial Maintenance Tech

Aurora CO

Base Pay: 30-32.90

ResourceMFG has an immediate Direct Hire opening for a 2nd shift Maintenance Tech in Aurora.   Qualified candidates will be skilled in au...

ResourceMFG has an immediate Direct Hire opening for a 2nd shift Maintenance Tech in Aurora.  

Qualified candidates will be skilled in automation, hydraulics, pneumatics and PLC's. Familiarity with boilers and MIG/TIG welding is a plus! 

Pay - $28-32/hr

2nd shift - Monday - Friday  2:00 pm to 10:30 pm

Duties include:

  • Supporting all aspects of building maintenance and upkeep.
  • Performing preventive maintenance, inspections, adjustments, and repairs on mechanical and electrical plant utilities and systems.
  • Keeping accurate and up-to-date records, including logs, work orders, and preventative maintenance orders.
  • Conducting failure analyses and research preventative options, working to achieve optimal machine uptime metrics.
  • Ordering spare parts and keeping them organized to ensure that you have what you need when you need it.  

 

 

Apply Now More Info

Press Brake Operator

Aurora CO

Base Pay: 18-22

We are seeking an experienced Press Brake Operator for an immediate temp to hire position located in Aurora. Qualified candidates will have at leas...

We are seeking an experienced Press Brake Operator for an immediate temp to hire position located in Aurora. Qualified candidates will have at least 3-5 years' recent press brake experience, preferably with Cincinnati/Wysong/Amada presses.

1st shift

Pay starts - $18-21/hr based on experience. 

Duties include:

  • Operate HMI on machine controller
  • Manufacture with metal forming equipment and tools primarily press brakes with controls.
  • Change overs of hard tooling and electronic set up knowledge, preventative maintenance practices on equipment, assemble and package of completed products to produce needed items in the pursuit of customers’ orders with direction from team leaders and shift leads.

 

Apply Now More Info

Blow Mold Machine Operator

Denver CO

Base Pay: 19.95 per HOUR

We are currently seeking a Blow Mold Machine Operator for a leading provider in packaging in Denver. Qualified candidates must have previous experi...

We are currently seeking a Blow Mold Machine Operator for a leading provider in packaging in Denver.

Qualified candidates must have previous experience with blow mold/extrusion machines.  Must follow Good Manufacturing Practices.

Pay starts at $19.95/hr

1st shift - 6 am - 3:15 pm Monday - Friday

Job Duties Include:

  • Insuring that all machines within the scope of responsibility are kept running and producing quality bottles while insuring the least amount of down-time possible. This includes communicating problems to on-coming shift personnel.
  • Completing all mold changes and set-ups. Minor maintenance activities are required.
  • Demonstrate organizational ability to complete daily clean-up assignments, and adequately maintain good housekeeping throughout the entire area of responsibility.
  • Ensure a positive team environment. 
  • Checks and monitors quality on all assigned machines by understanding and recognizing all visual quality defects and how to make appropriate adjustments to correct quality defects.
  • Maintains all required documentation of quality checks and testing, process checks, downtime, housekeeping and data entry.

Apply Now More Info

Assembler

Denver CO

Base Pay: 17.00 per HOUR

Monday through Thursday 4/10 schedule 7:00pm tp 5:30am Job Duties: Electrical Assembler Assembling light fixtures in assembly line,read blue print-...

Monday through Thursday 4/10 schedule 7:00pm tp 5:30am Job Duties: Electrical Assembler Assembling light fixtures in assembly line,read blue print-Schematics, pull cable, packaging products,know how to use a power tools such as small drill,wire strippers.Expect to stand for long periods of time. Other job duties make boxes and label boxes for shipping

Apply Now More Info

Saw Operator

Aurora CO

Base Pay: 22.00

ResourceMFG has an immediate temp to hire opening for a Saw Plate Operator in Aurora. This position offers weekly pay and benefits and room for gro...

ResourceMFG has an immediate temp to hire opening for a Saw Plate Operator in Aurora. This position offers weekly pay and benefits and room for growth! 

Pay - $20-22/hr based on experience.

1st shift - Monday - Friday 7 am - 4:30 pm with overtime available!

Qualified candidates will have recent saw plate operating experience.

You will be responsible for cutting metal accurately per customer orders while ensuring the equipment is maintained in a safe and clean condition.  

Apply Now More Info

Mig Welder

Golden CO

Base Pay: 18.50 per HOUR

ResourceMFG, Denver's Premier employer in manufacturing, has immediate openings for Mig Welders with Stainless Steel experience in Golden!  Wo...

ResourceMFG, Denver's Premier employer in manufacturing, has immediate openings for Mig Welders with Stainless Steel experience in Golden!  Work a 4 day work week with mandatory overtime once a month on Fridays!

Qualified candidates must have 1 year of recent welding experience and can do both horizontal and vertical welds and be able to pass a weld test. This is a fast-paced environment, so must be able to keep up!

1st shift - Monday – Thursday, 5:30 am – 4:30 pm  - $18.50 /hr

Mandatory overtime one Friday per month. Other Fridays are optional overtime, as needed. 

Apply Now More Info

Material Handler

Broomfield CO

Base Pay: 15.50-16.50

ResourceMFG is seeking material handlers for an awning supplier / manufacturer in Broomfield.  These are temp to hire positions that offer tre...

ResourceMFG is seeking material handlers for an awning supplier / manufacturer in Broomfield. 

These are temp to hire positions that offer tremendous room for growth and we can start you ASAP! 

  • Shift - Monday - Friday 10 am - 6:30 pm
  • Pay starts at $15.50/hr + $40/week attendance bonus = $16.50/hr

As the material handler, you will be working in the Shipping and/or Receiving departments,  processing, loading, unloading, stocking, and pulling finished products and raw goods.

Apply Now More Info

2nd Shift Material Handler

Broomfield CO

Base Pay: 16.20-17.20

ResourceMFG is seeking material handlers for an awning supplier / manufacturer in Broomfield.  These are temp to hire positions that offer tre...

ResourceMFG is seeking material handlers for an awning supplier / manufacturer in Broomfield. 

These are temp to hire positions that offer tremendous room for growth and we can start you ASAP! 

  • 2nd shift - 12 pm - 8:30 pm 
  • $16.20/hr + $40/week attendance bonus = $17.20/hr

As the material handler, you will be working in the Shipping and/or Receiving departments,  processing, loading, unloading, stocking, and pulling finished products and raw goods. 

 

Apply Now More Info

1st shift Material Handler

Broomfield CO

Base Pay: 15.50-16.50

We have immediate openings for 1st shift Material Handlers in Broomfield!  These are temp to hire positions that offer tremendous room for gro...

We have immediate openings for 1st shift Material Handlers in Broomfield! 

These are temp to hire positions that offer tremendous room for growth and we can start you ASAP! 

  • 1st shift - 6 am - 2:30 pm - Monday - Friday
  • $15.50/hr + $40/week attendance bonus = $16.50/hr

As the material handler, you will be working in the Shipping and/or Receiving departments,  processing, loading, unloading, stocking, and pulling finished products and raw goods. 

 

Apply Now More Info

Production Assembler

Broomfield CO

Base Pay: 14.50-15.20

We are seeking entry level assemblers for an awnings manufacturer in Broomfield.  These are entry level assembly positions that you will be tr...

We are seeking entry level assemblers for an awnings manufacturer in Broomfield. 

These are entry level assembly positions that you will be trained on and offer tremendous room for growth! 

  • 1st shift - 5 am - 1:30 pm Monday - Friday - Pay - $14.50/hr + $40 weekly attendance bonus = $15.50/hr
  • 2nd shift - 2:45 pm 11:15 pm Monday - Friday - Pay - $15.20/hr = $40 weekly attendance bonus = $16.20/hr

You will be working on the initial assembly of our awning products. 

 

#rmfgzip

#rmfgindeed

#readytowork

Apply Now More Info

1st & 2nd shift Packer

Broomfield CO

Base Pay: 15-15.70

We are seeking entry level Packers for an awnings manufacturer in Broomfield!  1st shift - Monday  - Friday 5 am - 1:30 pm ...

We are seeking entry level Packers for an awnings manufacturer in Broomfield! 

1st shift - Monday  - Friday 5 am - 1:30 pm Pay - $15/hr + $40 attendance weekly attendance bonus = $16/hr

2nd shift - Monday - Friday 2:45pm – 11:15pm  Pay - $15.70/hr (.70 shift differential included in pay) + $40 attendance weekly attendance bonus = $16.70/hr

You will be working on the final portion of assembling our awning products, packing, and palletizing them. 

These are entry level positions that you will be trained for. 

 

#rmfgzip

#rmfgindeed

Apply Now More Info

Electrical Control Panel Assembler

Littleton CO

Base Pay: 18-20

We are seeking an electrical control panel assembler for a manufacturer of industrial process heating solutions in Littleton.  Qualified...

We are seeking an electrical control panel assembler for a manufacturer of industrial process heating solutions in Littleton. 

Qualified candidates will have at least 1-3 years of electrical control panel assembly experience. 

Pay - $18-20/hr based on experience

1st shift - Monday - Friday 7 am - 3:30 pm

Duties include:

  • Read and interpret engineering drawings, schematic, and single line drawings.
  • Review wiring diagrams for accuracy and resolve problems with appropriate personnel.
  • Build cabinets and mechanical assembly.
  • Perform modular/sub-assembly.
  • Install PowerLine 1a, 2a, and 3a type panels; interiors, breakers. 
  • Assemble ground and neutral wires.
  • Determine wiring sequence, layout, and location and ensure space allowance for arrangement of wiring and components.
  • Mark wiring and components where required.
  • Carry out proper grounding procedures.
  • Work to CSA, UL codes and company quality requirements.
  • Apply consistency in wiring and assembly method for units of the same order.
  • Monitor products to ensure product and quality specifications are met.
  • Conduct final assembly; install panels and doors, inspect paint surface and alignment of doors and panels.
  • Repair and modify any errors detected by test/inspection. 
  • Prepare units for shipment; check units per final checklist; ensure units are clean and dust free.  

Apply Now More Info

Due to the effects the Coronavirus is having on our community, our office is working remotely.  We are still interviewing and hiring! You can complete an application online, and we will now do interviews over the phone and/or by video.

Staff Bios

Richard Gaeta
Richard Gaeta Area Vice President Contact Richard Gaeta
  • Started with the company October 2017, 25 years in the staffing industry
Matt Krumholz
Matt Krumholz Business Development Manager Contact Matt Krumholz
  • Started with company February 2019, over 25 years in the staffing industry
  • Accounting Degree from the University of Colorado at Boulder
  • Member of IAVM (International Association of Venue Management) and SMA (Stadium Management Association)
Lisa Lambright
Lisa Lambright Area Director Contact Lisa Lambright
  • Started with Employbridge in 2003, 15 years in the staffing industry
  • AA in Business Management