All 2017 W2s will be sent by 1/31/2018 to the address on file as of 12/31/2017.

close

Questions? 1-877-404-8449

Branch No: 20074
800 Clanton Road, Ste M
Charlotte, NC 28217
Phone: (704) 522-8872

Available Positions

7 positions available.

CNC Machinist

YORK SC

Base Pay: $17.00 - $23.00

Experienced CNC Machinist needed for large metals manufacture in Rock Hill, York SC area.  Pay determined by experience and job stability. Wi...

Experienced CNC Machinist needed for large metals manufacture in Rock Hill, York SC area. 

  • Pay determined by experience and job stability. Will pay up to $23.00
  • 2nd Shift  4p - 2:30am (Currently working extended hours 6p - 6a)
  • Will train on 1st shift for few weeks. 

 

This is a production environment and qualified candidates must have:

  • Knowledge of GD&T
  • Setup using G and M Codes, writing and modifying
  • Load, center and chuck parts properly
  • Select proper tools, RPM, IPR, machining sequence and depth of cut
  • Mentor and assist in "on the job" training for new employees

 

 

Apply Now More Info

Machine Operator

Charlotte NC

Base Pay: 12.00 - 14.00

ResourceMFG is currently hiring for experienced Machine Operators for the Charlotte area.  Printing Operators (Flexo, Offset) Plastics (Injec...

ResourceMFG is currently hiring for experienced Machine Operators for the Charlotte area. 

  • Printing Operators (Flexo, Offset)
  • Plastics (Injection Molding and Extrusion)
  • Metal Stamping
  • Punch Press
  • Stamp Press
  • Creeling (Textile)

We offer positions on all shifts to include 8 hours and 12 hours.  Schedules to fit everyone's needs. 

Pay $12.00 - $14.00

Free Online Courses upon working 80 Hours

(Better Work Life Academy - Penn Foster University)

 

Open House

No Appointment Necessary

Tuesday, January 23, 2018

9:30 Am

Bring two forms of ID and Resume for interview

 

Apply Now More Info

Overhead Crane Operator

YORK SC

Base Pay: 12.79

York, SC Manufacture is hiring an experience Overhead Crane Operator to make all necessary lifts in the forging department and transport rings to t...

York, SC Manufacture is hiring an experience Overhead Crane Operator to make all necessary lifts in the forging department and transport rings to the proper location.

Pay:
• $12.79 per hour
Hours:
• 2nd shift
• 2pm - 10pm
• Flexibility for OT
• This position works 50-70 hours weekly
Essential Duties:
• Operate overhead ring crane by hand held remote control
• Move rings and materials within the forging area.
• Transport rings to the heat treat area for processing.
• Make necessary change-over of tools and dies at the press and mill.
• Make necessary lifts for maintenance crew to repair equipment.
• Responsible for continuously operating the crane in a manner that will not damage rings or equipment.
• Ensure that all crane hook-ups are proper and secure.
• Responsible for continuously operating the crane in a safe manner.
• Report all necessary repairs and breakdown to the Team Leader.
• Assist in other areas of the plant as necessary and requested.
• Follow all plant rules and procedures within the department to ensure safe operating practices to prevent employee injury and/or equipment failure. Report any safety problems or concerns to Team Leader.
• Adhere to company-wide housekeeping standards in personal area and within department.
Benefits:
• Local York, SC company
• Convenient to York, Rock Hill, Fort Mill, Chester
• Weekly Pay
• Medical and Dental Benefits
• Overtime available

EDUCATION and/or EXPERIENCE
High school diploma or general education degree (GED) and one to three months related experience and/or training; or equivalent combination of education and experience.
• 1-3 months of related experience; or equivalent combination of education, training and experience
• Ability to stand for 10-12 hours daily
• Steel toed shoes
• Flexibility to work in a hot environment
• Ability to read and comprehend simple instructions, short correspondence and memos.
• Ability to communicate with all levels of management

Apply Now More Info

Brake Press Setup Operator

Charlotte NC

Base Pay: 13.00

Entry level and Experienced Punch Press, Brake Press and Stamp Press Setup Operators needed immediately. Large production metal fabrication shop lo...

Entry level and Experienced Punch Press, Brake Press and Stamp Press Setup Operators needed immediately. Large production metal fabrication shop located in south Charlotte.

Qualified candidates should be able to demonstrate their ability to read blueprints and use basic hand tools to setup and change dies for punch and stamp presses.

Pay: $12-13

Shifts available: 1st, 2nd and 3rd 

Apply Now More Info

Automated Machine Builder

Huntersville NC

Base Pay: 16.50

First shift manufacturing opening in Huntersville, NC in a state of the art facility that offers a clean and climate controlled environment. This i...

First shift manufacturing opening in Huntersville, NC in a state of the art facility that offers a clean and climate controlled environment. This is a long term contract position.

Pay:

$16 per hour

Hours:

1st shift
6:00am - 3:00pm
Monday - Friday

Essential Duties:

Fits and assembles components according to assembly blueprints, manuals, engineering memos, sketches
Knowledge of machine construction to construct, rebuild, and repair machines and equipment, using hand tools, power tools and dimensional measuring tools
Verifies conformance of parts to stock list and blueprints, using measuring instruments, such as calipers, gauges, and micrometers
Lays out hole locations and drills and taps holes on parts for assembly
Aligns components for assembly, manually or with hoist, and bolts, screws, dowels, or rivets parts together, using hand tools, power tools, and rivet gun
Verifies alignment and tolerances of moving parts, using measuring instruments, such as dial indicators calipers, micrometers and other gauges
Tests the operation of sub-assemblies at bench and/or machine level to verify operation.
Assembles sets up, and operates machine to verify functioning, machine capabilities, and conformance to customer's specifications.
May form and fasten piping, fixtures, and attachments required to service machine with air, water, and oil
May be required to install wiring and electrical components to specifications
May work as member of team on limited part of fabrication process
May set up and operate metalworking machines such as Bridgeport mill, vertical and horizontal band saw and lathe
Train and assist new employees as needed.
Exercise safe work habits & maintain a clean and safe working area

Benefits:
Weekly Pay
Medical Insurance Available on First Pay Day
ResourceMFG has partnered with Penn Foster and offers our associates over 16 courses like welding, manufacturing basics, etc. for FREE!
Convenient Location
State of the Art Climate Control Facility

Apply Now More Info

Inspection

YORK SC

Base Pay: 13.00

Steel Manufacturing Company in York, SC is looking for Inspectors  ESSENTIAL DUTIES AND RESPONSIBILITIES: Inspect all rings for dimensional t...

Steel Manufacturing Company in York, SC is looking for Inspectors 

ESSENTIAL DUTIES AND RESPONSIBILITIES:

  • Inspect all rings for dimensional tolerances and quality. Transport rings to pallets and move pallets to staging area.
  •  Follow daily operating schedule to ensure on-time delivery.
  • Receive and follow daily operating instructions from Team Leader when necessary. 
  • Check inspection equipment/tools for accuracy at the start of each shift.
  •  Use appropriate measuring tools to check dimensional stability and ensure product conformance to specification.
  • Label and maintain identity on product throughout the inspection process.
  •  Transport rings to pallets and move pallets to proper staging area.
  • Perform shot blasting on product if required.
  • Segregate non-conforming product, record degree of non-conformity and report all such deviation per department quality procedures.
  • Follow all departmental procedures and work instructions while adhering to the Company Quality System. Advise Team Leader of any quality problems or concerns.
  •  Assist in other departments and areas of the plant as needed and directed.
  • Follow all plant rules and procedures within the department to ensure safe operating practices in order to prevent employee injury and/or equipment failure. Report any safety problems or concerns to the Team Leader.
  • Adhere to company-wide housekeeping standards in personal area and within department.

 

QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE
High school diploma or general education degree (GED); 1-3 months of related experience; or equivalent combination of education, training and experience.

Apply Now More Info

Forklift Operator

Rock Hill SC

Base Pay: 11.00

Experienced forklift operator needed for a busy food manufacturer in Rock Hill. This company offers a friendly, team environment with excellent ben...

Experienced forklift operator needed for a busy food manufacturer in Rock Hill. This company offers a friendly, team environment with excellent benefits for families. This company also recognizes team members for their demonstration of each of their core cultures.

Hours are 7:00am - 5:00pm with the flexibility to work overtime as needed.

 

Prior experience packing and forklift operation in a food manufacturing environment $10 - $12/hour DOE.

Apply Now More Info
charlotte.jpg

Staff Bios

Jarrod Dyar
Jarrod Dyar Staffing Supervisor Contact Jarrod Dyar
  • Joined ResourceMFG in 2016 with three years of manufacturing experience
  • Recruits for Skilled Manufacturing
  • Attended Lee University,¬†Majored in Political Science
Shannon Lyles
Shannon Lyles Staffing Supervisor Contact Shannon Lyles
  • Joined the company in 2012, 18 years in related fields
  • Graduate of West Charlotte HS
  • CTS certification
Tamara Mantooth
Tamara Mantooth Market Manager Contact Tamara Mantooth
  • Joined the company in 2008, 25 years in the staffing industry
  • President's Club 2010
  • ResourceMFG Manufacturing Certification, ResourceMFG Safety Certification