Office Closures Due to Weather. Click here to read more.

close

Questions? 1-877-404-8449

Branch No: 31018
2145 North Josey Lane
Suite 118-120
Carrollton, TX 75006
Phone: (972) 426-8949

Available Positions

7 positions available.

Line Worker

Coppell TX

Base Pay: 14.00 per HOUR

ResourceMFG is looking for 5 good Assembly Line Workers for immediate start!   Special Project in Coppell, TX 1st Shift; 6:00am - 4:30pm $14.0...

ResourceMFG is looking for 5 good Assembly Line Workers for immediate start!

 

Special Project in Coppell, TX

1st Shift; 6:00am - 4:30pm

$14.00/hour

  • Fast paced production line,
  • Place lids on bottles, among other assembly tasks,
  • Quality Control of the product.

 

Apply Now More Info

Welder

Carrollton TX

Base Pay: 20.00 per HOUR

ResourceMFG is looking for a 2nd Shift Welder in N. Carrollton area; that can train on 1st Shift. PAY RANGE $18-$21 DOE. Read and interpret blue p...

ResourceMFG is looking for a 2nd Shift Welder in N. Carrollton area; that can train on 1st Shift.

PAY RANGE $18-$21 DOE.

  • Read and interpret blue prints,
  • Perform metal fabrication with heavy aluminum and steel to fabricate individual pieces,
  • Weld metal pieces together utilizing MIG, TIG, Stick and/or Flux Core welding practices,
  • Clean, grind, cut, smooth both metal and wood sections as prep for finishing,
  • Select proper paints for surface and finish,
  • Mix paints appropriately to obtain proper color, texture and finish,
  • Paint appropriate sections utilizing spray gun and painting booths,
  • Ensure proper finish after laminating and painting,
  • Prepare for shipping to trade shows nationwide,
  • Able to do entire project on a short time table and without any supervision,
  • Lifting, moving, and holding or clamping work pieces to table, into jigs, or into position as directed.

Apply Now More Info

Pipe Burner Fitter

Dallas TX

Base Pay: 19.00 per HOUR

ResourceMFG is looking for an experienced Pipe Burner Fitter in the South Dallas/Red Bird area. 1st Shift, 6:00AM - 2:30PM Pay scale $17 - $21 per...

ResourceMFG is looking for an experienced Pipe Burner Fitter in the South Dallas/Red Bird area.

1st Shift, 6:00AM - 2:30PM

Pay scale $17 - $21 per hour DOE

  • Pipe Burner Fitter that works with both carbon steel and stainless steel.
  • Must hold tolerances per blueprint.
  • Fitting of pipe fittings.
  • Complete quality documentation.
  • Maintain equipment to function properly.
  • Must be familiar with grinding, positioning and oxy-acetylene torches. 

Apply Now More Info

Boiler Maintenance Technician

Garland TX

Base Pay: 22.90 per HOUR

ResourceMfg is actively looking for an experienced Plant/Maintenance Engineering Technician II for our client located in Garland, TX 75042 for...

ResourceMfg is actively looking for an experienced Plant/Maintenance Engineering Technician II for our client located in Garland, TX 75042 for a temp to permanent opportunity.

Pay Rate: $22.90 per hour

Hours:  1st Shift

Duration:  Temp to Hire

Responsibilities include but not limited to:

  • Daily operation/maintenance of ammonia refrigeration systems
  • Daily operation/maintenance of boilers, pumps, and water feed systems
  • Daily operation/maintenance of CFC refrigeration and A/C systems
  • Daily testing and treating of boiler and cooling water systems
  • Daily operation/maintenance of compressed air systems
  • Daily operation/maintenance of vacuum pumps/systems
  • Ability to read and follow system drawings, manuals, and P & ID drawings
  • Ability to understand/comply with Process Safety Management guidelines
  • Participation on the plant Hazard Response Team with the following requirements

Apply Now More Info

Electro/Mech Technician I

Garland TX

Base Pay: 18.00 per HOUR

ResourceMFG is currently looking for a Electro-Mechanical Technician for our client located in Garland, TX 75042. Pay Rate:  $18.00 per hour H...

ResourceMFG is currently looking for a Electro-Mechanical Technician for our client located in Garland, TX 75042.

Pay Rate:  $18.00 per hour

Hours:  1st Shift

Duration:  Temp to Perm

Responsibilities include but not limited to:

  • Minimum of two year experience in repair and maintenance of electrical, mechanical, and hydraulic equipment i.e.: control panels, PLC's, lift systems, conveyor shaft, motor and bearing replacement, etc.
  • Diagnose mechanical problems and determine how to correct them, checking blueprints, repair manuals, or parts catalogs
  • Prior experience with Allen Bradley Control Logix Processors and RSLogix 5000.
  • Understanding of control system design and network communication interfaces is desired.
  • Work directly with production associates and management to problem-solve and correct production issues that will ensure maximum production efficiencies.
  • Observes mechanical devices in operation to locate causes of trouble.
  • Technical knowledge in DCS/PLC control systems, high voltage equipment, PLC applications, line drives, process instrumentation, data acquisition, etc.
  • Actively assist with planning/scheduling and storeroom staff for CMMS tracking: work orders, parts, purchase requisitions
  • Fabricate, disassemble and assemble production equipment to gain access to and remove defective parts
  • Investigates electrical and instrument equipment failures and develops action plans to eliminate repetitive failures.
  • Ability to work multiple tasks under pressure while maintaining professional demeanor with customers and co-workers 
  • Using the SAP Work Order system -Initiates purchase order for parts and machines and creates and documents hours worked on applicable work orders.
  • Performs preventative maintenance on all equipment and troubleshoot/repair processing, filling and packaging production equipment.
  • Read and interpret blueprints and equipment manuals.

 

Apply Now More Info

EDM Sinker Operator

Dallas TX

Base Pay: 16.00 - 26.00

Experienced Sinker EDM Operator needed for busy EDM job shop. Follow detailed instructions to operate Sinker EDM machine in safe, proper manner whi...

Experienced Sinker EDM Operator needed for busy EDM job shop.

Follow detailed instructions to operate Sinker EDM machine in safe, proper manner while holding tight tolerances and quality requirements

Schedule:  Monday - Friday 6am - 2:30pm

Pay Range: $16.00 - $26.00/hour

 

 

Apply Now More Info

EDM Operator Trainee

Dallas TX

Base Pay: 16.00 per HOUR

Company will train you for EDM. Schedule: Monday - Friday 6am - 2:30 pm Pay rate:  $16.00/hour  

Company will train you for EDM.

Schedule: Monday - Friday 6am - 2:30 pm

Pay rate:  $16.00/hour

 

Apply Now More Info

Staff Bios

Jana Coyle
Jana Coyle Business Development Manager Contact Jana Coyle
  • Started with the company July 2015, 18 years manufacturing experience
  • West Texas State University – Business Ad/Accounting
  • Member of E3, VSDA,
  • Top 500 Entrepreneur of the Year
  • New Employee training, Barron Group Sales Training, ResourceMFG 101 training
Dee Key
Dee Key Skilled Trade Recruiter Contact Dee Key
  • Started with the company May of 2018 with over 10 years in the manufacturing industry and over 3 years of recruiting experience
  • New Employee Training, ResourceMFG 101 Training, ResourceMFG Safety Training, Risk Training
Tamara Mizell
Tamara Mizell Market Manager Contact Tamara Mizell
  • Started with the company May of 2018 with over 25 years industry experience
  • New Employee Training, ResourceMFG 101 Training, ResourceMFG Safety Training, Risk Training
Toni Sanchez
Toni Sanchez Personnel Coordinator Contact Toni Sanchez
  • Started with Company in July 2014, brought extensive administrative skills and personality to the front desk face of the branch
  • Staff Performance Manager for 6 months with National Account Client
  • Provides exceptional customer service to all associates and clients
  • Trained in New Employee Training,  ResourceMFG 101, and TimeTrak paperless payroll system
Live Chat