Questions? 1-877-404-8449

This job is no longer available, but here are some other jobs:

Tool Technician

Eaton Rapids MI

Base Pay: $20-$30

ResourceMFG is seeking Tool Technicians in the Eaton Rapids, MI area. Candidates must be open to off shift positions and have experience working in...

ResourceMFG is seeking Tool Technicians in the Eaton Rapids, MI area. Candidates must be open to off shift positions and have experience working in the Tool and Die field. Wage is dependent on experience and is competitive with the market. If you or someone you know is interested in this opportunity feel free to apply now!

Major Responsibilities of Position

  • Maintain a safe working environment by performing duties in a safe, efficient and proper manner.  Applying and meeting all applicable codes, standards and/or regulations when doing work.
  • Working knowledge and understanding of lean concepts (5s).
  • Read and interpret blueprints or works from verbal or written instructions or from the part to be copied or fitted.
  • Ability to understand and read thermal schematics.
  • Plan the setup and operation of all types of machine shop tools, considering types of material, tolerances, types of cutting tools, coolants, lubricants, and machine tool feeds and speeds.
  • Heat treat and weld parts as required.
  • Determine specifications for inspection of work, using precision measuring and gauging tool, performing required inspection before, during and after machining/repair
  • Perform hand operations involved in producing fixtures, tools, jogs, and dies. Use hand tools of the trade.
  • Ability to grind flat and contoured surfaces with hand tools.
  • Fit and assemble fixtures, tools and dies. Set up, run off, and test dies to produce a product to specifications, tracing die difficulties to their source and correcting same.
  • Repair tooling as required while setup in the production equipment.
  • Responsible for providing necessary tools for daily work.

Apply Now More Info

Maintenance Technician

Eaton Rapids MI

Base Pay: $17.60-$31

ResourceMFG is seeking Maintenance Technician Candidates in the Eaton Rapids, MI area. Candidates must be open to off shifts, and will be responsib...

ResourceMFG is seeking Maintenance Technician Candidates in the Eaton Rapids, MI area. Candidates must be open to off shifts, and will be responsible for the repair, maintenance, and improvement all equipment associated with the production of die cast parts.  This includes, but is not limited to: die cast machines, presses, robots, electric melting furnaces/pre-heaters, CNC’s, and other related assembly equipment.

KEY RESULT AREAS OF THIS POSITION:

  • Safe working environment achieved and maintained.
  • Demonstrate a good, systematic, and logical approach to trouble-shooting problems.
  • Demonstrate a good working knowledge of hydraulic theory.
  • Demonstrate a good working knowledge of electrical theory.
  • Demonstrate a good working knowledge of pneumatic theory.
  • Demonstrate the ability to read and understand various prints, schematics, and drawings.
  • Demonstrate a good working knowledge of Allen-Bradley PLC’s (5, SLC500, 5000).
  • Demonstrate a good working knowledge of Motoman and ABB Robots (Trouble-shoot and programming)
  • Demonstrate a good working knowledge of rigging, and the use of heavy lifting equipment.
  • Demonstrate the ability to perform general fabrication and welding proficiently. 

ACTIVITIES AND TASKS:

  • Communicate, clearly, with manufacturing department and maintenance team on equipment status and repairs required.
  • Complete work orders as assigned by Team-leader/Function-leader.
  • Perform weekly, monthly, yearly PM’s per the CMS.
  • Fill out work orders for work completed.
  • Diagnose equipment issues and make the appropriate repairs in a timely manner
  • Recommend permanent solutions to re-occurring equipment issues.
  • Recommend additional spare parts if required to maintain equipment.
  • Maintain 5-S standards for maintenance area.
  • Enroll and complete the required Meridian apprenticeship program in the allotted time frame. (If required)
  • Willing to work off-shifts and required overtime.

Apply Now More Info

Maintenance Technician

Lansing MI

Base Pay: $17-$22

Looking for a great opportunity to further advance your Industrial Maintenance skill set? Well this could be just the opportunity for you! Pay will...

Looking for a great opportunity to further advance your Industrial Maintenance skill set? Well this could be just the opportunity for you! Pay will range from $17 to $22 an hour depending on experience. Interested candidates please apply now!

Requirements:

  • Candidate must be available for off shifts.
  • Capable of reading Schematics and electrical codes
  • Prior experience with Industrial Machinery Electrical experience with voltages up to 480v
  • Ability to dignose and troubleshoot PLC

Apply Now More Info

Welder

Jackson MI

Base Pay: 15.00 per HOUR

ResourceMFG is seeking an welder in the Jackson, MI area to shadow and grow with a company. This is a great opportunity on 1st shift from 7am till...

ResourceMFG is seeking an welder in the Jackson, MI area to shadow and grow with a company. This is a great opportunity on 1st shift from 7am till 3pm for $15 an hour! Prior 2 years of welding experience or certificates for welding are required!

Responsibilities: 

  • Designs, fabricates, joins, and/or repairs equipment, fixtures, and various types of metal objects (mostly stainless steel) and structures using MIG and other welding techniques
  • Operates a variety of welding equipment and hand tools
  • MIG welding/repairing of baskets and tanks
  • Analyzes plans, drawings, work samples, specifications, and work orders to determine work requirements and sequence of welding assignments.
  • Other duties as assigned

Apply Now More Info

CNC Machinist / Programmer

Lansing MI

Base Pay: $17-$30

ResourceMFG is looking for CNC Machinist in the Lansing, MI area. Journeyman Machinist's are highly preferred but not required. In addition, qualif...

ResourceMFG is looking for CNC Machinist in the Lansing, MI area. Journeyman Machinist's are highly preferred but not required. In addition, qualified candidates should have experience with G and M Code. Pay will ultimately be based on experience but typically ranges from $17 to $30 an hour. If you or some one you know are interested feel free to apply now!

Duties:

  • Edit programs on CNC machines, setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, basic geometry, and basic trigonometry; proving part programs. Performs self-inspection of parts and ensure they meet print specifications.
  • Routinely works with the knowledge of geometric dimensioning and tolerancing (GD&T).
  • Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, depth and angle of cut, or enter commands to retrieve, input, or edit computerized machine control media.
  • Must have ability to meet quality standards, deadlines and production requirements.
  • Responsible for adhering to all applicable MIOSHA required safety procedures in performing daily work activities.
  • Maintain high standards of housekeeping throughout the work area (5-S).
  • Assists in setting-up CNC machines by installing and adjusting, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers; indicating vices; tramming heads. 
  • Maintains equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs.

Apply Now More Info

Equipment Maintenance Technician

Charlotte MI

Base Pay: $25-$31

Seeking a Maintenance Technician with prior supervision experience to fill a role in the Charlotte, MI area. This is a great opportunity to further...

Seeking a Maintenance Technician with prior supervision experience to fill a role in the Charlotte, MI area. This is a great opportunity to further utilizing your experience and expertise in a great company. Candidates will need to be open for off shifts and pay will range from $25 to $31 an hour.

The Equipment Specialist is responsible for performing highly diversified duties to install, troubleshoot, repair and maintain production and facility equipment according to safety, predictive and productive maintenance systems.

Primary Responsibilities

  • Prior supervision experience is required.
  • Install and maintain production machines and the plant equipment.
  • Manage the implementation and continuous use of the preventive maintenance program.
  • Perform simple machinist duties and responsibilities. 
  • Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines. 
  • Read and interpret equipment manuals and work orders to perform required maintenance and service. 
  • Diagnose problems, replace or repair parts, test and make adjustments.
  • Perform regular preventive maintenance on machines, equipment and plant facilities. 
  • Perform a variety of plumbing maintenance and carpentry functions. 
  • Use a variety of hand and power tools, electric meters and material handling equipment in performing duties. 
  • Detect faulty operations, defective material and report those and any unusual situations to proper supervision. 
  • Comply with safety regulations and maintain clean and orderly work areas.
  • Assist in the relief of plant technical staff during absences from the plant.
  • Research, design and implement new technology to improve equipment performance

Apply Now More Info

CNC Operator

Mason MI

Base Pay: 15.00 per HOUR

ResourceMFG is looking for an experienced machine operator for a facility located in Mason, MI. This position is a 2nd shift position: 3pm-11pm. Qu...

ResourceMFG is looking for an experienced machine operator for a facility located in Mason, MI. This position is a 2nd shift position: 3pm-11pm.

Qualified candidates must:

  • Have a resume to be considered.
  • Experience with industrial machine operating.
  • Some CNC experience is preferred but not required.
  • Must display longevity in work history.
  • Have a great attendance record.

Apply Now More Info

Maintenance Technician

Lansing MI

Base Pay: $18-$25

ResourceMFG is looking for qualified candidates in the Lansing, MI area to take on a Maintenance Technician position. Pay will depend on...

ResourceMFG is looking for qualified candidates in the Lansing, MI area to take on a Maintenance Technician position. Pay will depend on experience but will range from $18 to $25 an hour depending on experience. If you or someone you know is interested please feel free to apply now!

Key Areas of Responsibility

  • Working knowledge of programmable controllers (PLC)
  • Support production in reducing and eliminating equipment / tooling downtime and scrap utilizing good analytical methodologies. (Preventive/Predictive Maintenance and Spare Part Inventory).
  • Perform equipment / tooling and facilities preventive maintenance (PM) per schedule provided. Complete all documentation required for PM's.
  • Perform repairs as required, and document all activities to maintain objective of less than 30 minutes mean time to repair (MTTR).
  • Assist in fabricating and implementing projects, as required.
  • Maintain and monitor a healthy and safe work environment utilizing MSDS's for the facility and all company, local, state and federal guidelines.
  • Document all activities as required.
  • Adhere to all company guidelines for Emergency Evacuation to ensure employee safety.
  • Any additional responsibility deemed necessary by management.

Apply Now More Info

CNC Lathe Machinist

Lansing MI

Base Pay: $15-$25

Are you a skilled CNC Lathe Machinist looking for your next great opportunity in Lansing, MI. Well we have just the opportunity for you!...

Are you a skilled CNC Lathe Machinist looking for your next great opportunity in Lansing, MI. Well we have just the opportunity for you! Candidates that are interested in working off shifts making $15 to $25 an hour at a great company that specializes in medical and aerospace should apply now!

Qualified candidates must have the following experience: 

  • Experience with high speed machining methods and techniques
  • Experience with Okuma Lathes highly preferred as well as adjusting off sets on Okuma OSP-P300LA.
  • Understanding of work planes and how to fine tune needed adjustments
  • Knowledge of the use of variables, macros, logic and sub programs to simplify NC code and improve processes 
  • Properly set-up, use and maintain collision avoidance features
  • Ability to calibrate and utilize offline tool presetter
  • Verify important tool geometry using a zoller presetter or optical comparator
  • Ability to maintain close tolerances within .0002"

Apply Now More Info

CNC Machinist

Mason MI

Base Pay: $20 - $28

ResourceMFG is seeking qualified candidates for a Machinist Programmer Position in the Mason, MI area. The Machinist Programmer fabricates or machi...

ResourceMFG is seeking qualified candidates for a Machinist Programmer Position in the Mason, MI area. The Machinist Programmer fabricates or machines components to meet the needs of various projects. This role will apply technical knowledge to identify process and equipment problems, recommend and implement solutions, collect and document data, and verify results.

Responsibilities

  • Participate in troubleshooting and analysis of problems to rapidly identify, evaluate, propose, and implement solutions
  • Read and interrupt complex part sketches, assembly prints, engineering drawings, technical materials, and machine stock material to design specifications
  • Retrieve and interrogate model files using CAD/CAM and associated software
  • Create machine tool programs for tooling and machine components through the use of CAD/CAM software
  • Design and prepare set-ups to perform machining operations efficiently, meeting the highest standards of accuracy
  • Inspect machined parts using precision inspection instruments and gauges to check for accuracy of work
  • Design and improvise temporary and permanent fixtures in order to perform machining and/or assembly operations along with special one-of-a-kind projects
  • Plan, process and perform all jobs in an efficient manner

Apply Now More Info

Assembler

Portland MI

Base Pay: 10.19 per HOUR

ResourceMFG is currently seeking assemblers for a company located Portland, MI. This company stamps and assembles automotive interior armrest conso...

ResourceMFG is currently seeking assemblers for a company located Portland, MI. This company stamps and assembles automotive interior armrest console brackets.

Job Type: Full-time, temp-to-hire

Shift: 1st shift 7AM-3:30PM

Pay: $10.19/hr

Apply Now More Info

Mold Operator

Grand Ledge MI

Base Pay: 11.00 per HOUR

ResourceMFG is currently recruiting for a MOLD PRESS OPERATOR to join an agriculture/automotive manufacturer in the Grand Ledge area! Job Title: Pr...

ResourceMFG is currently recruiting for a MOLD PRESS OPERATOR to join an agriculture/automotive manufacturer in the Grand Ledge area!

Job Title: Press Operator

Job Description: Load cut pieces of fiberglass into mold & pour resin into the press

Pay: $11/hr

Work Schedule: Monday-Friday 6:00AM-2:30PM, voluntary Saturdays

**Must be ok with working in a dusty & dirty environment with fiberglass & strong resin smell**

Apply Now More Info

Assembler

Portland MI

Base Pay: 10.89 per HOUR

ResourceMFG is currently seeking assemblers for a company located in Portland, MI. This company stamps and assembles automotive interior armrest co...

ResourceMFG is currently seeking assemblers for a company located in Portland, MI. This company stamps and assembles automotive interior armrest console brackets.

Job Type: Full-time, temp-to-hire

Shift: 2nd shift 3p-11p

Pay: $10.89/hr

Apply Now More Info

Assembler

Lansing MI

Base Pay: 11.00 per HOUR

Ready for a new opportunity?? Resource MFG is hiring 2nd shift assemblers for Avancez!! Avancez, formerly known as Android, is looking for motivate...

Ready for a new opportunity?? Resource MFG is hiring 2nd shift assemblers for Avancez!!

Avancez, formerly known as Android, is looking for motivated individuals to join their team! 

2nd shift assembly positions, Mon - Sat 4:55pm - 3am $11/hour

This is a temp to hire opportunity - pay increased to $11.50/hour when hired hire

Apply Now More Info

Assembler

Webberville MI

Base Pay: 11.00 per HOUR

Looking for work in Webberville?? Resource MFG is looking for 2nd shift assemblers!! We are currently recruiting for 2nd shift assemblers for a com...

Looking for work in Webberville?? Resource MFG is looking for 2nd shift assemblers!!

We are currently recruiting for 2nd shift assemblers for a company located in Webberville, MI.

Pay is $11

Operator Position works with carpet and plastics smaller parts 35lbs and under. What they do: They make carpet trunk liners and covers, seat backs, glove boxes… for Nissan, VW, Ford, Chrysler and Mercedes.

Apply Now More Info

Assembler

Howell MI

Base Pay: 12.00 per HOUR

ResourceMFG is hiring for an automotive supplier in Howell. These positions are assembly positions and are along the MTA bus line! Shifts: 6am-2:30...

ResourceMFG is hiring for an automotive supplier in Howell. These positions are assembly positions and are along the MTA bus line!

Shifts:

6am-2:30pm $12/hr

2pm-10:30pm $12.40/hr

10pm-6:30am $12.60/hr

 

Job Duties: Operating a robotic welding machine, loading parts in the welder and inspecting pieces when they are done.

 

Apply Now More Info

Paint

Lansing MI

Base Pay: 12.00 per HOUR

Resource MFG is hiring for a pontoon boat manufacturer in Lansing. The position is in the paint department with a concentration on sandblasting. Yo...

Resource MFG is hiring for a pontoon boat manufacturer in Lansing. The position is in the paint department with a concentration on sandblasting.

You will be sandblasting metal fabricated pieces. A protective suite with respirator must be worn.

Previous sand blasting experience preferred.

This is a direct hire, 1st shift position! 

Apply Now More Info

Wall Department

Lansing MI

Base Pay: 12.00 per HOUR

Resource MFG is hiring assemblers for a pontoon boat manufacturer in Lansing! This position is in the walls department. This departments build...

Resource MFG is hiring assemblers for a pontoon boat manufacturer in Lansing! This position is in the walls department. This departments builds the walls/railings of the boats per specific order.

You will be using various hand and power tools. You must be able to read a tape measure and have great attention to detail.

This is a direct hire, 1st shift opportunity!

Apply Now More Info

Visual Inspector

Webberville MI

Base Pay: 11.00 per HOUR

Looking for a 1st shift position in Webberville?? Resource MFG is hiring for 1st shift Visual Inspection in Webberville!! 1st 730am-4pm $11/hour Th...

Looking for a 1st shift position in Webberville??

Resource MFG is hiring for 1st shift Visual Inspection in Webberville!!

1st 730am-4pm

$11/hour

This is a temp to hire position, once brought on to an internal employee you would qualify for the following benefits; 401K, Health & Life Insurance.

JOB DESCRIPTION: This position is responsible for visually inspecting all produced components for quality before shipping.

• Visually inspect lenses & dials

• Complete inventory sheet and other logs daily

• Record all good and bad parts on counter

QUALIFICATIONS:

• High School Diploma or GED

• Good eyesight

• Good hand/eye coordination

• Basic math skills

• Ability to sit and perform tedious & repetitious work for the entire shift

• Basic knowledge of Microsoft Office

Apply Now More Info

Forklift Operator

Lansing MI

Base Pay: 12.00 per HOUR

Do you love fast-paced forklift work & lots of overtime opportunities?! Do you want to be hired directly into a company with room for advanceme...

Do you love fast-paced forklift work & lots of overtime opportunities?! Do you want to be hired directly into a company with room for advancement & growth?

ResourceMFG is currently seeking a forklift operator for a direct hire position in Lansing! The forklift operator is mainly responsible for loading & unloading trucks with a variety of merchandise. Mostly forklift work, but manual labor may be needed at times.

Shift: 4pm-finish (typical shifts are 8-10 hours)

Pay: $12/hr; production-based pay after training, with opportunity to make between $14-$18 (never below $12/hr)

Apply Now More Info

Assembler

Lansing MI

Base Pay: 12.00 per HOUR

ResourceMFG has DIRECT HIRE opportunities with a Pontoon manufacturer in Lansing. Departments vary within this company so depending on the departme...

ResourceMFG has DIRECT HIRE opportunities with a Pontoon manufacturer in Lansing.

Departments vary within this company so depending on the department will depend on what part of the pontoon you are assembling. We are looking for candidates with longevity within work history.

  • Must have a background in manufacturing/construction.
  • Must be comfortable with using various hand tools.
  • Must be able to read a tape measure and pass measuring testing

These are 1st shift positions! $12/hour!

Apply Now More Info

Finishing Crew Assembler

Lansing MI

Base Pay: 12.00 per HOUR

Resource MFG is hiring for 1st shift assemblers in Lansing! ***This is a direct hire opportunity!!!*** Do you enjoy re-wiring of small household ap...

Resource MFG is hiring for 1st shift assemblers in Lansing!

***This is a direct hire opportunity!!!***

Do you enjoy re-wiring of small household appliances, or hooking up car stereo components? Or even wiring a small home theater system?

ResourceMFG is actively searching for a unique individual that is "hands-on" and enjoys a different scope of work from day to day.

  • Experience with assembly using small power tools and general mechanical knowledge
  • Hourly rate upon immediate hire is $ 12.00
  • Reading and utilizing a tape measure is a requirement.
  • Member of finishing crew team which installs visual and non-visual wiring of speakers and electrical components of products in a assembly-like setting

Apply Now More Info

Assembler

Mason MI

Base Pay: 12.00 per HOUR

Are you in the Mason area looking to make a career? ResourceMFG has 1st shift assembly openings with an automotive supplier to start ASAP. Must be...

Are you in the Mason area looking to make a career? ResourceMFG has 1st shift assembly openings with an automotive supplier to start ASAP. Must be available to switch to 2nd shift once hired in.

Job Title: Assembler

Job Description: The assembler operates machinery to preform assembly functions to specifications at acceptable quality levels. This is fast-paced assembly, making varies valves. Must have at least 6 months of manufacturing experience.

Pay: $12/hr

Work Schedule: 1st shift 7:00AM-3:00PM

Apply Now More Info
Offline, leave a message
X
 
Thank you!
 

 
Thank you for contacting us. We will reach out to you within the next 24 hours.

An error was encountered and your message was not submitted. Please try again later.
Chat is Currently Offline,
Please leave a message.