Questions? 1-877-404-8449

This job is no longer available, but here are some other jobs:

General Labor

CANTON OH

Base Pay: 9.00 per HOUR

General Laborers needed! Can you handle a fast pace.  Apply today! All shifts available 1st: 7:30am-3:30pm 2nd: 3:30pm-11:30pm 3rd: 3:30-...

General Laborers needed! Can you handle a fast pace.  Apply today!

All shifts available

1st: 7:30am-3:30pm

2nd: 3:30pm-11:30pm

3rd: 3:30-11:30pm

General labor job description:

  • Quality check plastic parts
  • Remove flash and trim
  • Grind bad parts
  • Place finish parts into box and keep accurate count with product counter

Benefits: Attendance incentive available Medical, Dental, Vision, 401.k and free online courses to assist with job advancement.

Apply Now More Info

Machine Operator

Greenville PA

Base Pay: 10.00 per HOUR

ResourceMFG currently has Machine Operator Openings in Greenville, PA! General Job Duties: Trimming Rubber Material Machine Operation Moving Mater...

ResourceMFG currently has Machine Operator Openings in Greenville, PA!

General Job Duties:

  • Trimming Rubber Material
  • Machine Operation
  • Moving Material to Cooling Area
  • Quality Inspection

Benefits:

  • Room for advancement
  • Medical, Dental, Vision, and 401.k
  • Free online courses available for career advancement after 80 hours of work

 

Apply online today!

Rx678

Apply Now More Info

CNC Machinist

North Canton OH

Base Pay: 14.00 per HOUR

***NO EXPERIENCE IN CNC MACHINE SET UP? FORMAL TRAINING WITH CERTIFICATE IN CNC --- GREAT CAREER STARTER FOR YOU!!!*** We have have an opportunity...

***NO EXPERIENCE IN CNC MACHINE SET UP? FORMAL TRAINING WITH CERTIFICATE IN CNC --- GREAT CAREER STARTER FOR YOU!!!***

We have have an opportunity for you in North Canton that will allow you to work either 2nd or 3rd shift and get trained on 1st shift by those that know this shop

You will get paid $12.00 to $16 depending on experience and interview.

You will doing:

  • MUST BE ABLE TO RUN CNC LATHE AND MILL MACHINES == DO NOT NEED TO NO PROGRAMMING, SET UP OR TOOLING. BUT YOU MUST KNOW CNC AND NOT JUST MACHINE OPERATIONS
  • Make adjustments and edits to CNC programs
  • Paying close attention to details
  • Use measuring tools for CNC machines - Micrometer, Calibers, Tape measure
  • Some blue print reading
  • • Quality check final part
  • REMEMBER NO machine set-up or programming 

Apply Now More Info

Production

Massillon OH

Base Pay: 10.71 per HOUR

***APPLY TODAY AND MAKE SURE TO BE INTERVIEWED BY THIS THURSDAY TO START ON MONDAY AUGUST 27TH!! LIKE TO STAY COOL DURING YOUR SHIFT? NO REAL EXPER...

***APPLY TODAY AND MAKE SURE TO BE INTERVIEWED BY THIS THURSDAY TO START ON MONDAY AUGUST 27TH!! LIKE TO STAY COOL DURING YOUR SHIFT? NO REAL EXPERIENCE BUT WILLINGNESS TO SHOW UP FOR ALL SCHEDULED SHIFTS AND LEARN ***

For this career oriented opportunity in Massillon, you will make $10.71 / hr. And this is really important, you must be able to work BOTH 1st and 2nd shift -- they are 8 hour shifts that could start as early as 5 a.m. (for 1st) and start time of 12 noon to 4 p.m. for 2nd shift

You will be doing the following depending on production line:

  • 1st -- you have to be OK working in cool environment.
  • Sort through frozen foods Lift up to 30-40 lbs. consistently through shift
  • Be apart of a production line either putting food on packaging trays, film the carton or package it
  • Pay attention to details

RX678

Apply Now More Info

Packaging Assembler

Massillon OH

Base Pay: 11.00 per HOUR

***NO EXPERIENCE -- NO PROBLEM --- WE WILL BE TRAINING YOU! WE ARE LOOKING FOR A LOT OF PACKERS IN MASSILLON FOR NIGHT SHIFT IN MASSILLON FOR NIGHT...

***NO EXPERIENCE -- NO PROBLEM --- WE WILL BE TRAINING YOU! WE ARE LOOKING FOR A LOT OF PACKERS IN MASSILLON FOR NIGHT SHIFT IN MASSILLON FOR NIGHT SHIFT FROM 7 P.M. TO 7 A.M. SO GO AHEAD AND APPLY NOW***

ALSO WANT TO MAKE UP TO AN EXTRA $200 --- THEN APPLY & INTERVIEW AND ASK HOW THAT COULD HAPPEN

 For all of this you are going to make $11.00 / hr and for now, if you like OT this it where you will get it!

PLUS if your attendance is great and your performance is great then you will have the chance to get hire into the company with a strong career path and more $$

This is what you will be doing:

  • Packaging finish products into cartons and packaging process in order to ensure overall product quality.
  • Count accuracy and attention to detail is critical
  • You will be standing for 12 hours in a hot environment --- so be ready for that! If you can't handle the heat in the kitchen then this is not for you!

RX345

Apply Now More Info

CNC Mill Operator

Orrville OH

Base Pay: 18.00 per HOUR

*** ARE YOU AN ACCOMPLISHED CNC MILL / LATHE SET-UP AND OPERATOR LOOKING FOR A STRONG CAREER OPPORTUNITY IN A GREAT SHOP  -- THEN THIS IS A GR...

*** ARE YOU AN ACCOMPLISHED CNC MILL / LATHE SET-UP AND OPERATOR LOOKING FOR A STRONG CAREER OPPORTUNITY IN A GREAT SHOP  -- THEN THIS IS A GREAT OPPORTUNITY FOR YOU***

Great client in Orrville (15 miles north west of Massillon) is looking for a career oriented person for a temp to hire potential position

Looking for someone who can work 3rd shift from 10:00 p.m. to 6 a.m. Monday through Friday. Typically 40 hour work week. Need to be available to train on 1st shift

Rate: $16.00 - $20.00 depending on experience and interview 

 Job Description: Sets up and operates conventional, special purpose, and numerical control (NC) machines and CNC machining centers to fabricate metallic and nonmetallic parts by performing the following duties.

  • Studies blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished workpiece, sequence of operations, and setup requirements.
  • Measures, marks, and scribes dimensions and reference points on material or workpiece as guides for subsequent machining.
  • Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, jig borers, grinders, and shapers.
  • Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media.
  • Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required.
  • Verifies conformance of finished workpiece to specifications.
  • Sets up and operates machine on trial run to verify accuracy of machine settings or programmed control data.
  • Verifies dimensions and alignment of assembly. Installs machined

Apply Now More Info

CNC Laser Set-Up and Operator

Orrville OH

Base Pay: 16.50 per HOUR

*** DOES YOUR RESUME REFLECT THAT YOU HAVE STAYED AT JOBS FOR 3+ YEARS, DO YOU HAVE SOLID MATHEMATICAL APTITUDE AND A DESIRE TO LEARN?? --- THEN TH...

*** DOES YOUR RESUME REFLECT THAT YOU HAVE STAYED AT JOBS FOR 3+ YEARS, DO YOU HAVE SOLID MATHEMATICAL APTITUDE AND A DESIRE TO LEARN?? --- THEN THIS IS A GREAT OPPORTUNITY FOR YOU***

Great client in Orrville (15 miles north west of Massillon) is looking for a career oriented person for a temp to hire potential position

Looking for someone who can work 1st shift from 6 a.m. to 2:30 p.m. Monday through Friday. Typically 40 hour work week. 

Rate: $14.00 - $18.00 depending on experience and interview 

Job Overview: Manufactures parts with gas or solid-state laser devices by performing the following duties. May operate one or more lasers at one time.

Job Description and details:

  • Reviews part instructions such as assembly layout, blueprints, and sketches, and sets up machine to run.
  • Downloads programs for scheduled cutting sequences. Interprets production details such as dimensions and functional requirements, and makes numerical control adjustments to the laser for proper operation.
  • Turns controls of vacuum pump and gas transfer equipment to purge, evacuate, and fill laser body with specified volume and pressure of gases such as helium, neon, or carbon dioxide, to laser beam. Sets up precision electronic and optical instruments to test laser device. Tests laser for gas leaks.
  • Places and aligns raw material on laxer bed utilizing crane assist.
  • Performs secondary operations during cycle times
  • Removes lasered components from laser bed and places them on carts/skids

Apply Now More Info

Assembler

Canton OH

Base Pay: 11.00 per HOUR

***REWARD YOUR GREAT WORK ETHIC AND JOB HISTORY (EVEN IN FAST FOOD) WITH A GREAT CAREER OPPORTUNITY STARTING WITH ASSEMBLY***  Our client in C...

***REWARD YOUR GREAT WORK ETHIC AND JOB HISTORY (EVEN IN FAST FOOD) WITH A GREAT CAREER OPPORTUNITY STARTING WITH ASSEMBLY***

 Our client in Canton has opportunities for 3rd shift (11:00 p.m. to 7:30 a.m. ---- must be available to train on 1st shift prior to moving to 3rd shift). Shift is Sunday night - Thursday night .... Monday - Friday during 1st shift training

Pay rate: $11.30 for 3rd shift --- $11.00 for training on 1st shift)

You will start out in assembly which includes:

  • Could be simply sort parts
  • Assemble truck suspension and parts according to specs
  • Part of an assembly line responsible for part of the assembly process
  • May utilize hand or power tools
  • Complete quality check when completed 

Apply Now More Info

Truck Loader - Shipping Associate

Mount Hope OH

Base Pay: 15.00 per HOUR

***ENJOY A GOOD HOURLY WAGE ($15 WITH OT OF $22.50 / HR) AND WORKING OUT THOSE MUSCLES DOING IT  -- THIS IS FOR YOU!!*** You will be working i...

***ENJOY A GOOD HOURLY WAGE ($15 WITH OT OF $22.50 / HR) AND WORKING OUT THOSE MUSCLES DOING IT  -- THIS IS FOR YOU!!***

You will be working in Mt Hope, OH (about 25 minutes south of Massillon) with the following shifts available (PRESENTLY)

1st shift 5a-4:30p (shifts will be 8-14 hours)

2nd shift 4:30p-4a (shifts will be 8-14 hours)

2nd shift  1p-9:30p (shift will be 8-14 hours)

You will get $13.92/hr. and lots of OT at $20.88/hr. being a truck and line loader doing the following 

 • Loads product onto delivery trucks by hand in a manner to minimize damage of product in transit

• Ensures accuracy and quality of all loads

• Lift or move various product, up to 75 pounds above head (to lift door panels onto the truck) on consistent basis 

 

Rx678

Apply Now More Info

Production Associate, Assembly

Mount Hope OH

Base Pay: 13.92 per HOUR

***LIKE OVERTIME AND GOOD OLE' FASHIONED GENERAL LABOR REQUIRING SOME EFFORT? LIKE TO MAKE $13.92+ AND KNOW HOW TO BE DEPENDABLE ON A DAILY BASIS?...

***LIKE OVERTIME AND GOOD OLE' FASHIONED GENERAL LABOR REQUIRING SOME EFFORT? LIKE TO MAKE $13.92+ AND KNOW HOW TO BE DEPENDABLE ON A DAILY BASIS? THEN THIS IS FOR YOU***

This is an Assembly position. Our client is in Mount Hope, OH (about 25 minutes southwest from Massillon so be ready to commute some each day). 

Shifts can vary and availability can change quickly so the more flexibility you have, the better.

1st shift: Depending on production line will begin between 5 a.m. - 6 a.m. and will go until somewhere between 2:00 p.m. to 6 p.m. 

2nd shift: Will start approximately 3:30 p.m. and go until somewhere between 11:30 p.m. to 3:30 a.m.

3rd shift: will start around 9:00 p.m. and go until somewhere between 5:30 a.m. to 9 a.m.

Pay Rate: You will make $13.92 / hr and $20.88 / hr for OT

Be ready to do the following for this position:

• Assemble product to specifications according to blueprints, drawings, and work orders.

• Work with hand tools and power tools

• Handle fast pace environment

• Pay attention to details

 

Rx678

• Use tape measure

• Lift up to 40 lbs. 

Apply Now More Info

Warehouse Associate

Orrville OH

Base Pay: 11.00 per HOUR

***INTERVIEW TODAY AND START TOMORROW? SOUND GOOD AND LIKE WAREHOUSE WORK + 10-20 HOURS OF OT WEEKLY --- THEN THIS IS FOR YOU!!!*** We have a clien...

***INTERVIEW TODAY AND START TOMORROW? SOUND GOOD AND LIKE WAREHOUSE WORK + 10-20 HOURS OF OT WEEKLY --- THEN THIS IS FOR YOU!!!***

We have a client in the ORRVILLE looking for 1st shift from 6 a.m. to anywhere between 3 p.m. to 6 p.m. Monday - Friday. NEED TO WORK MANDATORY OT WHEN NEEDED. You will get paid $11.00 / hr 

This is what you will be doing as a Warehouse Associates 

  • Pick products from shelving and at times refrigerator
  • Use RF scanner for accuracy and inventory counts
  • Use electric pallet jacks
  • Required to be willing and able to lift 50 lbs consistently through the shift. 

Apply Now More Info

Aluminum Welders

Canton OH

Base Pay: 14.00 per HOUR

*** PREFER AND MORE SKILLED AT WELDING WITH ALUMINIUM? THIS IS YOUR OPPORTUNITY*** Take the opportunity to weld in Canton for either 1st shift...

*** PREFER AND MORE SKILLED AT WELDING WITH ALUMINIUM? THIS IS YOUR OPPORTUNITY***

Take the opportunity to weld in Canton for either 1st shift or 3rd shift. 

You will be paid based on your welding test from $14 up to $18.00 / hr

This is a temp job but those with excellent job performance and attendance may have the opportunity to get hired in

This is what you will be doing: Weld aluminum and structural parts per print, customer, and quality requirements.

You will do this by:

  • Using MIG and TIG techniques
  • Welding longitudinal, circumferential seams, and various other joints, etc.
  • Welding in all directions
  • Blueprint reading and standards (supervisor will provide on the job training.
  • Make fixtures as required to make job more efficient.
  • Do fit ups
  • Metal finishing
  • Assist other departments as needed. 

Apply Now More Info

Sheet Metal Welder

Canton OH

Base Pay: 15.00 per HOUR

**GREAT WITH MIG AND TIG AND WELDING ON SHEET METAL -- THIS IS YOUR OPPORTUNITY*** Make sure you apply to this great opportunity in Canton, OH witt...

**GREAT WITH MIG AND TIG AND WELDING ON SHEET METAL -- THIS IS YOUR OPPORTUNITY***

Make sure you apply to this great opportunity in Canton, OH witth opening on 1st or 3rd shift

Your skills will get you between $14.00 - $18.00 hr depending on your welding test. This is project based but if your performance and attendance are good then this could be a temp to hire

 

What you will be doing: Weld sheet metal and structural parts per print, customer, and quality requirements

You will do this with:

  • MIG and TIG welding
  • Blueprint reading and standards (supervisor will provide on the job training)
  • Make fixtures as required to make job more efficient
  • Weld in all directions
  • Do fit ups
  • Metal finishing as required
  • Advise supervisor of NCMR on engineering type problems
  • Must have excellent attendance  and Stud Gun

Apply Now More Info
Live Chat