Questions? 1-877-404-8449

This job is no longer available, but here are some other jobs:

CNC Machinist

MONROE NC

Base Pay: 20.00 per HOUR

CNC Machinist- 2nd shift- Monroe, NC Experienced CNC Machinist needed immediately for a global manufacturer of highly engineered products and sub-s...

CNC Machinist- 2nd shift- Monroe, NC

Experienced CNC Machinist needed immediately for a global manufacturer of highly engineered products and sub-systems used in the energy, aerospace and industrial markets. Pay: $18.00 - $20.00 Direct Hire Hours: 2nd Shift 3:30pm - 11:30pm Primary Responsibilities: - Demonstrated ability to operate both manual and CNC machinery for the manufacture of metal products to specific print dimensions and tolerances. - Interpret engineered drawings - Use gages and precision inspection tools to adhere to ultra-precision tolerances - Perform routine and repetitive work while maintaining a high standard of quality and quantity - Select and set proper holding divices, fixtures and necessary attachments; layout as required - Adjust and set cutting tools in tool changers or heads, grind single cutting tools as required - Select proper speeds and feeds - Machine castings, forgings weldments and bars requiring seperate machining to correlated dimensions and surface with milling and drilling of all kinds, hand tapping, boring, reaming and turning; Surface3 and OD Grinding - Skill Requirements: - Experience using cutting tools, boring heads, parallels, vee blocks, hand tools and other necessary shop equipment. - Read and work from prints, charts, sketches, process specifications and masters. - Strong fabrication shop math (multiplication, conversions,ratios, percentages, division)

Apply Now More Info

Printing Press Helper

Charlotte NC

Base Pay: 13.50 per HOUR

Printing Press Helper- 2nd shift 4:00 PM-2:00 AM- Training on 1st shift Charlotte, NC Join a Great company, Work in a friendly and Immaculate envir...

Printing Press Helper- 2nd shift 4:00 PM-2:00 AM- Training on 1st shift

Charlotte, NC

Join a Great company, Work in a friendly and Immaculate environment!

  • State of the art facility
  • Climate Controlled!
  • Excellent benefit package
  • Westinghouse blvd location
  • Great working environment!!
  • Email resumes to ashley.vera@resourcemfg.com

 

Must have a strong attention to detail, Strong mechanical aptitude

Job details:

  • Assisting with setting up plates and ink
  • Changing stations
  • Run press when operators out
  • Other duties as assigned

 

Apply Now More Info

CNC Machinist

Matthews NC

Base Pay: 20.00 per HOUR

CNC Machinist- Matthews, NC- 2nd Shift CNC Machinist needed to set up and operate CNC Horizontal Boring Mill, Vertical Mills and Lathes to machine...

CNC Machinist- Matthews, NC- 2nd Shift

CNC Machinist needed to set up and operate CNC Horizontal Boring Mill, Vertical Mills and Lathes to machine parts to blueprint specifications. Must be a self-starter able to read and interpret blueprints and drawings.

ResourceMFG offers Medical Benefits and FREE online courses! Ask for details today!

Apply Now More Info

Industrial Painter

Monroe NC

Base Pay: 17.00 per HOUR

Industrial Painter, 1st shift, Monroe, NCDIRECT HIRE $17/hr. Job details: Responsible for maintaining all tools including spray guns and parts Wil...

Industrial Painter, 1st shift, Monroe, NC
DIRECT HIRE

$17/hr.


Job details:

  • Responsible for maintaining all tools including spray guns and parts
  • Will be painting carbon steel and other metals.
  • Masking, sanding, bonding and bead blasting.

Requirements:

  • Must have experience with wet paint using HVLP sprayers
  • Skilled with industrial enamel paint and epoxy
  • Manage paint supply and paint booth with knowledge of waste management and OSHA regulations
  • Experience with touch up painting

 

Apply Now More Info

Custom Assembler/Fabricator

Matthews NC

Base Pay: 15.00 per HOUR

Assembler/fabricator needed for busy Manufacturing company in Matthews area. Temp to hireExcellent hours 8:4:30, Monday- Friday Seeking a candidate...

Assembler/fabricator needed for busy Manufacturing company in Matthews area. Temp to hire
Excellent hours 8:4:30, Monday- Friday

Seeking a candidate with assembly/fabrication skills, who is used to working in a custom environment. Must have strong problem solving skills.

 

Job details:

Set up a jig based on drawing dimensions Operate Ultra sonic spot welder to assembly product Measuring skills Pick parts Learn thousands of different types of designs

Apply Now More Info

Shop Team Lead

Monroe NC

Base Pay: 25.00 per HOUR

Machine Shop Lead-1st Shift- Monroe, NC Direct Hire Lead man needed to set-up and operate CNC Mills and Lathes and monitor the daily production act...

Machine Shop Lead-1st Shift- Monroe, NC

Direct Hire

Lead man needed to set-up and operate CNC Mills and Lathes and monitor the daily production activities of other Machinists/operators.

4- 10 hour days Mon - Thurs. with occasional Friday overtime

Benefits: Small Shop, Climate Controlled. Day Shift only, 100% Paid Health benefits for employee

 

 

Apply Now More Info

MIG Welder

Lancaster SC

Base Pay: 17.00-20.00

Welder/Fabricator- 1st shift- Lancaster, SC   MIG Welder/Fabricator needed to assemble and weld components to a cosmetically appealing finish....

Welder/Fabricator- 1st shift- Lancaster, SC

 

MIG Welder/Fabricator needed to assemble and weld components to a cosmetically appealing finish. Single-piece flow production environment.

Great company! Fast growing! Overtime potential!

ResourceMFG offers Medical benefits and FREE on-line courses to our associates! Ask for details!

Apply Now More Info

Saw Operator

YORK SC

Base Pay: 13.00 per HOUR

ResoureMFG is looking to hire a Saw Operator in York SC, 3rd Shift!!! Will Train on 1st shift until training is complete then move to 3rd shift Hou...

ResoureMFG is looking to hire a Saw Operator in York SC, 3rd Shift!!!

Will Train on 1st shift until training is complete then move to 3rd shift Hours: 10:00PM-6:00AM  

POSITION SUMMARY:

Set up and cut steel according to work orders. 

Verify incoming steel grade using Spectrotest, heat number, and number of steel blocks and log information into computer.

Responsible for initial Trace ID (heat number) of grade within VMFG system. Set up and maintain SPC system.

Assist in maintaining machinery including the changing of saw blades and general light maintenance on all equipment.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.

Other duties may be assigned as applicable.

• Ensure correct material is being cut by checking computer and Spectrotest for correct heat number and color code.

• Set up and operate saws. Change saw blades as required.

• Perform Spectrotest on the first cut of each bar/ingot.

• Check cut blocks according to specifications shown on job packet by weighing on a scale.

• Accurately record the heat number, steel grade, and number of pieces cut into the computer (VMFG).

• Complete daily production log.

• Stack blocks of steel on pallet and/or use forklift to transport blocks to storage area.

• Make any necessary adjustments to saw to get weights within specifications.

• Use Pi tape to verify circumference on every cut of stainless steel and ingots.

• Use Pi tape to verify material measurements prior to each setup on every job.

• Operate overhead crane to transport material.

• Follow all plant rules and procedures within the department to ensure safe operating practices in order to prevent employee injury and/or equipment failure. Report safety problems/concerns to Team Leader.

• Adhere to company-wide housekeeping standards in personal area and within department. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities

Down Load the ResourceMFG app today! The official app for associates to stay connected to ResourceMFG throughout the job search, and while on-the-job. -See Matched Jobs that are a good fit for your profile and work experience -Receive and accept Job Offers from your ResourceMFG recruiter -Stay informed with details about what you need to know on your First Day at a new assignment -View your Pay Stub history -Set your availability for new assignments

 

Benefits available with ResourceMFG as soon as you receive your first pay check!

 

Enroll in flexible, on-demand courses built to fit into your busy schedule, through ResourceMFG and Penn Foster. Associates who have worked 80+ hours are eligible. Choose from 15+ FREE, online courses!

Apply Now More Info

CNC Machinist

Wadesboro NC

Base Pay: 22.00 per HOUR

CNC Machinists 1st shift- 6:30 - 2:30 PM 2nd shift- 3:00 PM- 11:00 PM $22/hr Wadesboro, NC Job details: Sets up and operates computerized numeric...

CNC Machinists

  • 1st shift- 6:30 - 2:30 PM
  • 2nd shift- 3:00 PM- 11:00 PM
  • $22/hr
  • Wadesboro, NC

Job details:

Sets up and operates computerized numerically controlled turning centers to perform machining operations such as drilling, turning, boring, facing and threading parts such as castings, forgings and bar stock by performing the following duties:

  • Reads process sheets, blueprints to determine machining to be done, dimensional specifications, set up and operating requirements
  • Mounts work piece between centers
  • Selects and installs preset tooling in tool posts, turrets or index heads.
  • Inspects first piece Sets tools before positioning them in lathe.
  • Sets up and operates another machine tool during machining cycles.
  • Machines metallic and nonmetallic materials

Requirements:

  • One year  certificate from college or technical school or 3-6 months related experience or training
  • Strong Math skills

Apply Now More Info

CNC Maintenance Technician

Wadesboro NC

Base Pay: 25.00 per HOUR

CNC Maintenance Technician 1st shift- 6:00 AM - 2:30 PM, Monday- Friday, OT on Saturdays as needed $25/hr Wadesboro, NC Send resumes to michael.con...

CNC Maintenance Technician

1st shift- 6:00 AM - 2:30 PM, Monday- Friday, OT on Saturdays as needed

$25/hr

Wadesboro, NC

Send resumes to michael.conti@resourcemfg.com

 

Job details:

Installs and repairs electrical systems and electronic components of industrial machinery and equipment by performing the following duties:

  • Installs power supply wiring and conduit for newly installed machines and equipment such as robots, conveyors and programmable controllers.
  • Connects power supply wires to machines and equipment and connects cables and wires between machines
  • Diagnoses malfunctioning devices
  • Tests malfunctioning machinery
  • Operates PLC and CNC programmable controlled equipment

Requirements:

  • One year certificate  from college or technical schools or 1 year related experience
  • Training in electronics/electrical/mechanical maintenance
  • Strong math
  • Electrical license preferred

Apply Now More Info

Blender/Batcher Operator

Monroe NC

Base Pay: 16.50 per HOUR

Temporary Plant Operators needed for Monroe manufacturing company.  Training on 1st shift  Pay: $16.50 per hour Hours: 3:00 PM- 1:30 AM,...

Temporary Plant Operators needed for Monroe manufacturing company. 

  • Training on 1st shift 
  • Pay: $16.50 per hour
  • Hours: 3:00 PM- 1:30 AM, Monday- Friday
  • Benefits available immediately after receiving your first paycheck with ResourceMFG
  • Weekly pay
  • Position will be lasting until end of September 2018

 

 Job details:

Plant operators will be responsible for all plant operations: Blending, batching, forklift operation, loading and unloading

  • Blending raw material
  • Batching raw materials
  • Disperse product into bags (50 LBS)
  • Operate forklift to move pallets of product
  • Other duties as needed.

Requirements:

  • Must have recent manufacturing experience
  • Must be able to lift and move 50 lbs regularly throughout shift
  • Must be able to wear a respirator
  • Must have forklift experience
  • Steel toes, hard hat. safety glasses, respirator

Apply Now More Info
Offline, leave a message
X
 
Thank you!
 

 
Thank you for contacting us. We will reach out to you within the next 24 hours.

An error was encountered and your message was not submitted. Please try again later.
Chat is Currently Offline,
Please leave a message.