All 2017 W2s will be sent by 1/31/2018 to the address on file as of 12/31/2017.

close

Questions? 1-877-404-8449

This job is no longer available, but here are some other jobs:

CNC Machine Operator

Kalamazoo MI (1 miles)

Base Pay: 19.00

Recognized leader in supplying pumps, valves, seals, automation, and services to the power, oil, gas, chemical, and other industries, is seeking a...

Recognized leader in supplying pumps, valves, seals, automation, and services to the power, oil, gas, chemical, and other industries, is seeking a well qualified CNC Machinist for their Grinding Department in their local Kalamazoo Facility.

If you have an exceptional work history and are an experienced CNC Machinist- Grinder and have experience with CNC Programming.

then we would like to talk to you. Submit resume with work history and experience to KalamazooMI@resourcemfg.com

This position is responsible for:

  • Run manual and CNC Grinding equipment
  • Provide coverage in the grinding department to support customer delivery
  • Read simple blueprints, route sheets, and use basic measuring equipment
  • Perform Quality checks to ensure standards

 

Shift Hours: 2nd shift (3:30pm-2:00am)

Pay Rate: $19.00 

 

Apply Now More Info

Greenhouse/Transplant

Kalamazoo MI (4 miles)

Base Pay: 11.25

Transplant - This is a medium impact position with a lot of upper body movement. Transplanting is done from a standing position and you will repeti...

Transplant - This is a medium impact position with a lot of upper body movement. Transplanting is done from a standing position and you will repetitively either plant, label, or stack product onto carts or load conveyor line. You will stand in one place most of the day. Transplant is fast paced line work which you have to do your part in order to keep the line moving. Hand/Eye coordination is very important as well as being able to pay attention to detail. You must have an eye for quality while looking for non-uniform plant material as you are planting.

Apply Now More Info

Welder/fabricator

Kalamazoo MI (4 miles)

Base Pay: 16.00

GROWING LOCAL COMPANY  Resource MFG is looking to help fill 2nd shift MIG Welder/Fabricator positions for a local growing company. These are s...

GROWING LOCAL COMPANY 

Resource MFG is looking to help fill 2nd shift MIG Welder/Fabricator positions for a local growing company. These are scheduled to last approximately 3 months, but may turn into career opportunities for the right candidates. 

In this position you will be responsible for fabricating and MIG welding large HVAC Units from the ground up.

  • MIG Welding metal panels
  • Bending and fabricating metal panels
  • Grinding and machining units

PAY RATE: $16.00

OUR COMPANY OFFERS A FULL RANGE OF BENEFITS:

  • WEEKLY PAY
  • MAJOR MEDICAL, DENTAL, VISION
  • SHORT TERM DISABILITY AND TERM LIFE
  • FREE ON-LINE COURSES
  • PREFERRED CUSTOMER DISCOUNTS WITH AT&T AND VERIZON

Apply Now More Info

Shipping and Receiving

Kalamazoo MI (4 miles)

Base Pay: 13.00

Local Greenhouse company in the greater Kalamazoo area is searching for a qualified Shipping and Receiving Associate. The responsibilties for the&n...

Local Greenhouse company in the greater Kalamazoo area is searching for a qualified Shipping and Receiving Associate.

The responsibilties for the SHIPPING/RECEIVING ASSOCIATE will include but not limited to:

Assisting shipping department with preparing product for shipment

Keep records of out going shipments

Quality checks of products being shipped

Final packaging of products being shipped

Forklift operation for loading/unloading trucks

Strong communication

Strong computer skills

Be well organized

Have a solid work attendance history

Apply Now More Info

Maintenance

Kalamazoo MI (4 miles)

Base Pay: 13.00

MAINTENANCE TECH 1ST SHIFT PAY RATE $13.00 Local Greenhouse is looking for Maintenance Tech to assist with: overall building maintenance, Machine M...

MAINTENANCE TECH

1ST SHIFT

PAY RATE $13.00

Local Greenhouse is looking for Maintenance Tech to assist with: overall building maintenance, Machine Maintenance and repairs.

Having experience with farm equipment is a plus

Knowledge of greenhouse and horticulture a plus

Must have great communication skills

Ability to work independently

Good transportation

Must dependable and reliable with solid attendance record

Be able to follow directions

Apply Now More Info

Logistics Coordinator

Kalamazoo MI (4 miles)

Base Pay: 13.00

Looking for a Seasonal Logistics Coordinator for local Greenhouse Company. Seasons will be February-June and September - November. This Logistics C...

Looking for a Seasonal Logistics Coordinator for local Greenhouse Company. Seasons will be February-June and September - November. This Logistics Coordinator position will require long hours, and late nights during core shipping season.

Key responsibilities:

  • Plan and coordinate truck deliveries in a timely and cost effective manner
  • Maintain all required DOT documents and Driver Qualifications
  • Learn greenhouse inventory system(PICAS) and intergrate with TMW transportation systems
  • Plan and coordinate cart retrieval in a timely manner
  • Communicate trip delivery status to customers and sales team
  • Coordinate the creation of all related paperwork

Wages commensurate with experience

Our Company offer:

A full range of medical, dental and vision insurance

Short term disability and Term Life Insurance

Paid on-line courses to help advance you in your career

Preferred customer discounts with AT&T and Verizon

Apply Now More Info

General Labor

Kalamazoo MI (4 miles)

Base Pay: 16.00

GROWING LOCAL COMPANY  Resource MFG is looking to help fill 2nd shift General Labor/Fabrication positions for a local growing company. These a...

GROWING LOCAL COMPANY 

Resource MFG is looking to help fill 2nd shift General Labor/Fabrication positions for a local growing company. These are scheduled to last approximately 3 months, but may turn into career opportunities for the right candidates. 

In this position you will be responsible for performing General Labor/Fabrication on  large HVAC Units from the ground up.

  • Assist in assembly of metal panels
  • Bending and fabricating metal panels
  • Grinding and machining units
  • Any other duties as needed to help assist in the overall production of these large HVAC units

PAY RATE: $16.00

OUR COMPANY OFFERS A FULL RANGE OF BENEFITS:

  • WEEKLY PAY
  • MAJOR MEDICAL, DENTAL, VISION
  • SHORT TERM DISABILITY AND TERM LIFE
  • FREE ON-LINE COURSES
  • PREFERRED CUSTOMER DISCOUNTS WITH AT&T AND VERIZON

Apply Now More Info

Greenhouse/Sticking

Kalamazoo MI (6 miles)

Base Pay: 11.25

Sticking - This is a low impact position with a lot of repetitive upper body movement. Sticking is done from sitting in a chair or standing at the...

Sticking - This is a low impact position with a lot of repetitive upper body movement. Sticking is done from sitting in a chair or standing at the table and repetitively planting the cuttings. Hand/Eye coordination is very important as well as being able to pay attention to detail. You must have an eye for quality while looking for non-uniform plant material as you are sticking. This is fast paced line work and you need to be able to work in a team of 3.

Apply Now More Info

Machine Operator

Portage MI (6 miles)

Base Pay: 11.00

RESOURCE MFG is looking for a MACHINE OPERATOR for a long standing company manufacturing innovative sanitary products for over...

RESOURCE MFG is looking for a MACHINE OPERATOR for a long standing company manufacturing innovative sanitary products for over 80 years. All of their products are manufactured and assembled at the headquarters in Michigan.

  • This is a full time position with some overtime offered.
  • Must have forklift and machine operating experience.
  • Must have good work history and attendance as well.
  • Must be able to train on 1st shift and move to 2nd shift.
  • Must have good mechanical skills
  • work at a fast pace
  • driven
  • perform various duties including machine operating.

SHIFT-1st or 2nd depending on need 

PAY RATE=$11.00 per hour

Apply Now More Info

CNC Machine Operator

Portage MI (6 miles)

Base Pay: 12.50

CNC Machine Operator Local Kalamazoo Company is looking for CNC machine Operator for a 2nd shift. This is a long term temp to hire position. So, if...

CNC Machine Operator

Local Kalamazoo Company is looking for CNC machine Operator for a 2nd shift. This is a long term temp to hire position. So, if oyu are looking for the next big step to help in your career journey apply at: www.resourcemfg.com

Operate a CNC Machine Gaging parts Able to read blue prints Knowledge of CNC Programming highly desired Attention to detail

SHIFT: Mon-Fri 3:30p-2:00a

PAY RATE: $12.50

Our company offers:

Medical, Dental, Vision

Short term disability and Term life

Free On-line courses

Preferred customer discounts at AT&T or Verizon

Apply Now More Info

Assembler

Galesburg MI (8 miles)

Base Pay: 10.00

We are looking to fill ASSEMBLY positions in the Galesburg, MI area for a first shift. you will be responsible for: meeting daily rates of assembly...

We are looking to fill ASSEMBLY positions in the Galesburg, MI area for a first shift. you will be responsible for: meeting daily rates of assembly on LED lights Quality inspection of parts Packaging of completed parts

SHIFT:1st shift

PAY RATE: $10.00

You can expect to receive a $1.00 raise at 90 days + opportunity for hire -in after 1000 hours worked.

Our Company offers:

Medical, Dental, Vision

Short term and life insurance

Free on-line courses

Preferred customer discounts with AT&T and Verizon

Apply Now More Info

Machine Operator

Plainwell MI (11 miles)

Base Pay: 11.25

A CAREER IN MANUFACTURING WITH RESOURCEMFG! This is a full time, temp to hire MACHINE OPERATOR position for a long standing company in Plainwe...

A CAREER IN MANUFACTURING WITH RESOURCEMFG!

This is a full time, temp to hire MACHINE OPERATOR position for a long standing company in Plainwell. Candidate will be operating a machine

checking parts for quality

packaging parts

various production needs.

Must be able to lift up to 40lbs without restrictions, ability to read a tape measure, have reliable transportation and good work history. Prior machine operating experience is a must.

 

 

IF YOU'RE LOOKING FOR A CAREER IN MANUFACTURING, WE HAVE GREAT OPPORTUNITIES FOR YOU!

Apply Now More Info

General Labor

Plainwell MI (11 miles)

Base Pay: 10.00

A well established manufacturer of precision components to large and small companies, with a unique mix of processing capabilities of springs, wire...

A well established manufacturer of precision components to large and small companies, with a unique mix of processing capabilities of springs, wireforms, and machining needs, is looking for a General Labor candidate to work their 2nd shift.

LOCATION: Plainwell, MI

SHIFT: 2nd shift (2;00pm-10:00pm)

PAY RATE: $10.00 per hour

In this 2nd shift General Labor position you will be responsible for:

  • Sorting Parts
  • Hand Packaging
  • Painting
  • Deburring products
  • Heat-treating
  • Placing springs in in grinding wheels
  • Inserting shrink tube over springs

Apply Now More Info

Maintenance Technician

Schoolcraft MI (12 miles)

Base Pay: 18.00

A CAREER IN MANUFACTURING WITH RESOURCEMFG! MAINTENANCE TECHNICIAN 1ST SHIFT SCHOOLCRAFT SUMMARY: Repairs and maintains machinery and mechanical eq...

A CAREER IN MANUFACTURING WITH RESOURCEMFG!

MAINTENANCE TECHNICIAN

1ST SHIFT

SCHOOLCRAFT

SUMMARY: Repairs and maintains machinery and mechanical equipment such as engines, motors, pneumatic tools, conveyor systems, and production machines and equipment by performing the following duties. This position may require overtime to include weekends.

IF YOU'RE LOOKING FOR A CAREER IN MANUFACTURING, WE HAVE GREAT OPPORTUNITIES FOR YOU!

Our Company Offers:

Medical, Dental, Vision Insurance

Short Term Disability, Life Insurance

Free On-line Courses for Career Advancement

Preferred Customer Discounts with AT&T and Verizon

Apply Now More Info

Assembler

Schoolcraft MI (12 miles)

Base Pay: 10.00

WE are looking for a 1st shift assembler for a long standing company in Schoolcraft. This ASSEMBLER position will be responsible: Assembly of...

WE are looking for a 1st shift assembler for a long standing company in Schoolcraft.

This ASSEMBLER position will be responsible:

Assembly of metal parts

Performing Quality checks of products

Packing completed products for shipment

 

PAY RATE: 11.00 hourly

SHIFT: 1st Shift (6:00 am-2:30 pm)

 

Our Company offers:

Medical, Dental, Vision

Short term disability and Term life

Free On-Line courses

Preferred customer discounts with AT&T and Verizon

 

Apply Now More Info

Material Handler

Schoolcraft MI (12 miles)

Base Pay: 11.00

    WE are looking for a well qualified MATERIAL HANDLER 1ST SHIFT SCHOOLCRAFT, MI ESSENTIAL DUTIES AND RESPONSIBILITIES include the foll...

 

 

WE are looking for a well qualified MATERIAL HANDLER

1ST SHIFT

SCHOOLCRAFT, MI

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.Other duties may be assigned.

Reads work order or follows oral instructions to ascertain materials or containers to be moved.

Opens containers.

Loads and unloads materials and tools onto or from pallets, trays, racks, and shelves by hand and with fork truck.

Loads materials into vehicles for shipments.

Conveys materials and tools from storage or work sites to designated area.

Secures lifting attachments to materials and conveys load to destination.

Counts, weighs, and records number of parts in containers and pounds on coil.

Attaches identifying tags or labels to materials or marks information on coils, or other containers.

Lifts heavy objects by hand or with power hoist, cleans work area, machines, and equipment to assist machine operators.

Assembles boxes to contain products.

Operates industrial truck or electric hoist to assist in loading or moving materials and products.

May be required to work off shifts as needed. May work in other areas of either plant based on production requirements.

IF YOU'RE LOOKING FOR A CAREER IN MANUFACTURING, WE HAVE GREAT OPPORTUNITIES FOR YOU!

Apply Now More Info

Press Operator

Schoolcraft MI (12 miles)

Base Pay: 11.00

A CAREER IN MANUFACTURING WITH RESOURCEMFG! A long standing company in Schoolcraft is seeking a full time, temp to hire press operator. This compan...

A CAREER IN MANUFACTURING WITH RESOURCEMFG!

A long standing company in Schoolcraft is seeking a full time, temp to hire press operator. This company specializes in stampings, tooling, assemblies, and fabricated components. Candidate must have strong mechanical aptitude, eager to learn, & work in a fast paced environment.

Pay rate will start at $11 an hour, but could increase quickly with improvement.

Must be able to lift up to 40lbs without restrictions.

Must have steel toe work boots

reliable transportation

 good work history/attendance

IF YOU'RE LOOKING FOR A CAREER IN MANUFACTURING, WE HAVE GREAT OPPORTUNITIES FOR YOU!

Apply Now More Info

Production Planner

Battle Creek MI (20 miles)

Base Pay: 16.00

We are staffing for a Production Planner. This position is responsible for the management of the make to order, make to stock and raw material purc...

We are staffing for a Production Planner. This position is responsible for the management of the make to order, make to stock and raw material purchase demands generated by the MRP subsystem within the consumables production group.

  • Manage MRP demands for make to order and make to stock consumable items by creating and maintaining the appropriate process orders required by the shop floor to fulfill the MRP demand.
  • Manage MRP demands for raw material items utilized by the consumables groups in order to create and maintain purchase orders to insure raw materials levels are in place for production demand consumption.
  • Create and distribute process order packets to the team leaders.
  • Analyze post production process order job cost to verify it is in line with production estimates and/or moving averages and report deviations to the Production Manager.
  • In conjunction with the Production Manager, maintain the various production schedules and keep the ERP system and sales team up to date with the current production plans.
  • Monitor all ball mill slip samples from the Ceramic Production group and arrange for shipment to Rosler Germany for analysis.
  • Log all ball mill slip sample analysis from Rosler Germany.
  • Monitor production samples from the consumables groups for analysis.
  • Log all production samples from the consumables groups.
  • Monitor all wear test samples and arrange for them to be processed by the Test Lab department.
  • Log all wear test samples from the Test Lab.
  • Request creation of all consumable material numbers from Rosler Germany with the approval of the Production Manager.

Our company also offer's great benefits!

  • Paid Weekly
  • Insurance Options
  • 90 day hire in with good attendance and job performance.  
  • Medical: Major Medical, Wellness and Basic plans to choose from
  • Dental
  • Vision
  • Term Life
  • Short Term Disability
  • Weekly Pay
  • Preferred Customer Discounts with AT&T and Verizon

Apply Now More Info

Engineering Manager

Battle Creek MI (20 miles)

Base Pay: 50000.00

Due to recent growth at a local Battle Creek Company. we have created a new and exciting position. We are looking for an experienced person to over...

Due to recent growth at a local Battle Creek Company. we have created a new and exciting position. We are looking for an experienced person to oversee the day to day engineering activities. This position will report to the Senior Management of Advantage Sintered Metals.

Responsibilities

  • Supervise all Process Engineering activities including new product launches, APQP process & FMEA’s.
  • Oversee Tool Design, work with outside tool vendors on designs & approvals, tool trouble shooting and design improvements.
  • Liaison between customer and ASM Staff on all technical issues.
  • Work with customers during the quoting & launch process to help develop appropriate PM part designs.
  • Participate in the quoting process.
  • Trouble shooting of PM Process issues.
  • Work with Quality Assurance to maintain TS 16949 requirements.
  • New Equipment and process evaluations.
  • Secondary Machining process improvements.

 

 

Apply Now More Info

Entry Level Industrial Fabricator

Lawrence MI (24 miles)

Base Pay: 10.00

We are searching for individuals that are seeking a Career in Manufacturing! ResourceMFG has partnered with a company that supplies restaurants, br...

We are searching for individuals that are seeking a Career in Manufacturing!

ResourceMFG has partnered with a company that supplies restaurants, breweries, convenience stores, grocery stores, florists, mortuaries, and more, with the cold storage solutions they need and can provide insulated panel systems for nearly every temperature environment. They take pride in their ability to custom design unique applications and are looking for qualified people to fill positions on the production floor.

Job Description: •Entry level manufacturing position. 1st shift

7:00a-3:30p  M-F

•$10/hr pay base rate

Job Benefits:

•401 K

•Paid Vacations and Holidays

•Attendance Incentives

Apply Now More Info

Machine Operator

Three Rivers MI (25 miles)

Base Pay: 10.00

A company in Three Rivers, MI is looking for machine operators on their 2nd shift! We are looking for candidates with great attendance habits.

A company in Three Rivers, MI is looking for machine operators on their 2nd shift! We are looking for candidates with great attendance habits.

Apply Now More Info

Welder

Bangor MI (27 miles)

Base Pay: 19.80

This is a full time temp to hire welding position.  Pay rate will start at $19.80 hr. Bangor or Kalamazoo Location. RESPONSIBILITIES: Demonstr...

This is a full time temp to hire welding position. 

Pay rate will start at $19.80 hr.

Bangor or Kalamazoo Location.

RESPONSIBILITIES: Demonstrate an advanced amount of knowledge, attitude, skills and habits required to perform proceduralized tasks under general supervision, and complex tasks involving the use of theoretical knowledge with little to no supervision. Demonstrate a higher level of skill and dexterity for welding processes of metal. Must be able to perform all functions of the basic welder classification. Read and interpret blueprints or welding process specifications. Use manual or semi-automatic welding equipment to fuse metal pieces using processes such as TIG, GTAW, MIG or GMAW, FAW, SMAW, OAW, and resistance welding. Operate manual or semi-automatic flame-cutting equipment when necessary. Repair broken or cracked parts and fills holes as needed. Weld in flat, horizontal, vertical, or overhead positions. Set up weld machine, and select the appropriate fixture and identifying the proper weld schedule. Setup equipment and prepare surfaces to be welded and weld parts as required. Identify welding problems to reduce quality errors. Position and clamps work pieces together or assembles them in jig or fixture. Tack accessories to main structures as needed. Use and Read tape measures down to 16th of an inch. May perform additional cross-functional duties as assigned.

Apply Now More Info

Assembler

Homer MI (41 miles)

Base Pay: 13.00

Looking for a career with a stable, global company? We are staffing for Brembo North America, The world's leading brake manufacturer located in Hom...

Looking for a career with a stable, global company? We are staffing for Brembo North America, The world's leading brake manufacturer located in Homer, MI. We are looking for entry-level Assemblers. Multi-task in a fast paced physically demanding environment. Maintain a safe work environment. Support 5S standards

  • Starting pay 13.00+ based on experience
  • All shifts are available.

Our Company Offers

  • Paid Weekly
  • Insurance Options
  • 90 day hire in with good attendance and job performance.  
  • Medical: Major Medical, Wellness and Basic plans to choose from
  • Dental
  • Vision
  • Term Life
  • Short Term Disability
  • Weekly Pay
  • Preferred Customer Discounts with AT&T and Verizon

Benefits include upon hire in with

  • 401K match
  • Tuition Reimbursement
  • Wellness Plan
  • Quarterly Bonuses

Apply Now More Info

Core Shop Operator

Homer MI (41 miles)

Base Pay: 13.00

Are you looking for a stable career with a growing, global company? Brembo North America, the world’s leading performance brake manufacturer...

Are you looking for a stable career with a growing, global company? Brembo North America, the world’s leading performance brake manufacturer is hiring!! Brembo is in Homer, MI. Successful candidates should have robotic troubleshooting experience. First level maintenance in an industrial setting is helpful. At least 1 year of general manufacturing / production experience required. Starting pay 13.00+ based on experience.

Our company also offer's great benefits!

  • Paid Weekly
  • Insurance Options
  • 90 day hire in with good attendance and job performance.  
  • Medical: Major Medical, Wellness and Basic plans to choose from
  • Dental
  • Vision
  • Term Life
  • Short Term Disability
  • Weekly Pay
  • Preferred Customer Discounts with AT&T and Verizon

Benefits include upon hire in with Brembo North America

  • 401K match
  • Tuition Reimbursement
  • Wellness Plan
  • Quarterly Bonuses

Apply Now More Info

Machine Operator

Homer MI (41 miles)

Base Pay: 13.00

We are hiring for Production Machinists positions at Brembo North America. Are you looking for a stable career with a growing, global company? Brem...

We are hiring for Production Machinists positions at Brembo North America. Are you looking for a stable career with a growing, global company? Brembo North America, the world’s leading performance brake manufacturer is hiring!! Brembo is in Homer, MI.

Benefits through ResourceMFG to include: 

  • Paid Weekly
  • Insurance Options 
  • 90 days hire in with good attendance and job performance. 
  • Medical: Major Medical, Wellness and Basic plans to choose from 
  • Dental  Vision
  • Term Life
  • Short Term Disability 
  • Weekly Pay 
  • Preferred Customer Discounts with AT&T and Verizon

Benefits include upon hire in with Brembo

  • 401K match 
  • Tuition Reimbursement 
  • Wellness Plan
  • Quarterly Bonuses

 

Apply Now More Info

Machine Operator

Homer MI (41 miles)

Base Pay: 13.00

We are staffing for Finishing Line Positions at Brembo North America. Are you looking for a stable career with a growing, global company? Brembo No...

We are staffing for Finishing Line Positions at Brembo North America. Are you looking for a stable career with a growing, global company? Brembo North America, the world’s leading performance brake manufacturer is hiring!! Brembo is in Homer, MI., you must be able to travel.  These positions are 90 day hire in with good attendance and job performance.

Starting pay 13.00+ based on experience. All shifts are available.

Our company also offer's great benefits!

  •  Paid Weekly
  •  Insurance Options
  •  Medical: Major Medical, Wellness and Basic plans to choose from
  •  Dental
  •  Vision
  •  Term Life
  •  Short Term Disability
  •  Weekly Pay
  •  Preferred Customer Discounts with AT&T and Verizon

Benefits include upon hire in with Brembo

  •  401K match
  •  Tuition Reimbursement
  •  Wellness Plan
  •  Quarterly Bonuses 

 

Apply Now More Info

Production Associate

Bristol IN (42 miles)

Base Pay: 13.00

Job Description: Production Worker 2nd Shift 5pm-5am ($13/hr) Position will vary, could include: Feeding wood boards into production line St...

Job Description:

Production Worker 2nd Shift

5pm-5am ($13/hr)

Position will vary, could include:

  • Feeding wood boards into production line
  • Stacking finished products
  • Trimming lamination 
  • Stripping laminate off boards with defects
  • Packaging of finished products
  • All production workers do daily housekeeping
  • Production Workers could move up and become Machine Operators or Forklift Drivers ($14-16/hour)

Knowledge based pay increases for all Production Workers

Great Family Owned Company

Clean Work Environment

Get full time hire within 60-90 days 

Rx678

Apply Now More Info

Production Associate

Bristol IN (42 miles)

Base Pay: 12.00

Job Description: Production Worker 1st Shift: 5am-5pm ($12/hr) Position will vary, could include: Feeding wood boards into production line...

Job Description:

Production Worker

1st Shift: 5am-5pm ($12/hr)

Position will vary, could include:

  • Feeding wood boards into production line
  • Stacking finished products
  • Trimming lamination 
  • Stripping laminate off boards with defects
  • Packaging of finished products
  • All production workers do daily housekeeping
  • Production Workers could move up and become Machine Operators or Forklift Drivers ($14-16/hour)

Knowledge based pay increases for all Production Workers

Great Family Owned Company

Clean Work Environment

Get full time hire within 60-90 days 

Rx678

Apply Now More Info

Yarn Inventory Processor

Grand Rapids MI (42 miles)

Base Pay: $11/hour

ResourceMFG is looking for a dedicated and punctual individual for a Yarn Inventory Processor position on 1st shift in the ...

ResourceMFG is looking for a dedicated and punctual individual for a Yarn Inventory Processor position on 1st shift in the Kentwood, MI area! This position has the potential of becoming permanent for the right candidate.

Hours: 5:00 AM - 3:30 PM, with occasional Saturdays

Pay: $11/hour

Responsibilities:

  • Working with yarn inventory pulling yarn cones for production
  • Recording information in our custom operating system (Job Track) and on job cards
  • Moving yarn inventory and accounting for yarn returned
  • Returning yarn to inventory and recording in Job Track
  • Making yarn poms (small samples of yarn for designers and customers)

Apply Now More Info

Yarn Winder

Grand Rapids MI (42 miles)

Base Pay: $10/hour

A carpet manufacturer in the Kentwood, MI area is looking for a hard-working candidate for a 2nd Shift Yarn Winding position. This p...

A carpet manufacturer in the Kentwood, MI area is looking for a hard-working candidate for a 2nd Shift Yarn Winding position. This position has the potential of becoming permanent for the right individual!

Pay: $10/hour

Hours: 3:30 PM - 12:00 AM

Responsibilities:

  • Transfer large yarn skeins from cartons to winding machine
  • Operate winding machine which moves yarn from skeins to cones
  • Record information in proprietary operating system (JobTrack)

Apply Now More Info

Dye House Operator

Grand Rapids MI (42 miles)

Base Pay: $11-$12/hour

We are looking for hard-working Machine Operators for a 2nd shift Dye House Operator opening at a carpet manufacturer in the Ke...

We are looking for hard-working Machine Operators for a 2nd shift Dye House Operator opening at a carpet manufacturer in the Kentwood, MI area! This position has the potential of becoming permanent for the right candidates.

Hours: 3:30 PM - 12:00 AM

Pay: $11-$12/hour

Responsibilities:

  • Retrieve, weigh and record yarn
  • Transfer yarn to dyeing cabinet poles to prepare for dyeing
  • Using scales and other measuring devices, weigh and dispense dyes according to job card instructions
  • Operate dyeing machinery according to job card instructions
  • Load centrifuge extractor with wet yarn
  • Operate extractor to remove excess moisture
  • Load and unload yarn
  • Operate radio frequency dryer according to directions
  • Record production details as required
  • Operate within OSHA compliance standards as well as all health and safety requirements
  • Perform housekeeping in the dyeing area to ensure a safe and clean workplace

Apply Now More Info

Machine Operator

Grand Rapids MI (42 miles)

Base Pay: $14.00/hour

ResourceMFG is in search of hard-working Machine Operators with a strong work history for various openings on 2nd shift in the Grand...

ResourceMFG is in search of hard-working Machine Operators with a strong work history for various openings on 2nd shift in the Grand Rapids/Kentwood, MI area! These positions are temp to hire for the right candidates.

Positions include:
Packer
Machine Operator
CNC Operator
Panel Saw Operator

Hours: 2:30 PM - 11:30 PM

Pay: $14.00/hour

Responsibilities:

  • On/Off-loading of the product from tables, rolling racks, delivery trucks, or wood crates for eight or more hours, daily
  • Operate CNC and/or panel saw as production process
  • Regular and predictable attendance, safely perform tasks and adherence to all safety policies and procedures
  • Special Order Receiving including checking in materials and providing the packing slips to our SO team for confirmation of arrival
  • Communicate to cell lead of any issues
  • Attach appropriate labels and tags to products and packages
  • Notify lead person or supervisor of any mechanical or material issues
  • All production workers are expected to be available to work in all areas of production

Apply Now More Info

Machine Operator

Grand Rapids MI (42 miles)

Base Pay: $13.00/hour

A custom closet manufacturer in the Grand Rapids/Kentwood, MI area is looking to add 4 hard-working machine operators to their 1st shift!...

A custom closet manufacturer in the Grand Rapids/Kentwood, MI area is looking to add hard-working machine operators to their 1st shift! These positions have the potential of becoming permanent for the right candidate.

Positions include:
Packer
Machine Operator
CNC Operator
Panel Saw Operator

Hours: 6:00AM - 2:30PM

Pay: $13.00/hour

Responsibilities:

  • On/Off-loading of the product from tables, rolling racks, delivery trucks, or wood crates for eight or more hours, daily
  • Operate CNC and/or panel saw as production process
  • Regular and predictable attendance, safely perform tasks and adherence to all safety policies and procedures
  • Special Order Receiving including checking in materials and providing the packing slips to our SO team for confirmation of arrival
  • Communicate to cell lead of any issues
  • Attach appropriate labels and tags to products and packages
  • Notify lead person or supervisor of any mechanical or material issues
  • All production workers are expected to be available to work in all areas of production

Apply Now More Info

Packaging

Elkhart IN (43 miles)

Base Pay: 14.00

ResourceMFG has teamed up with Hydro/SAPA Extrusion! Hydro/SAPA is looking for reliable, motivated individuals who can join their expanding aluminu...

ResourceMFG has teamed up with Hydro/SAPA Extrusion! Hydro/SAPA is looking for reliable, motivated individuals who can join their expanding aluminum extrusion facility. Must be able to work 12 hour shifts and every other weekend. Night shift hours are 5:45 PM-6:00 AM Position requires full physical, hearing/vision test, drug screen prior to starting. PPE requirements are hard hat, ear plugs, long sleeves, metatarsal boot and safety glasses. JOB QUALIFICATIONS •Ability to work unsupervised •Strong oral and written communications skills •Be able to lift 50 pounds repeatedly. Day shift pay: $14.00/hour 90 day temp to hire

Apply Now More Info

Equipment Maintenance Specialist

Charlotte MI (43 miles)

Base Pay: $25 - $31

The Equipment Specialist is responsible for performing highly diversified duties to install, troubleshoot, repair and maintain production and facil...

The Equipment Specialist is responsible for performing highly diversified duties to install, troubleshoot, repair and maintain production and facility equipment according to safety, predictive and productive maintenance systems and processes to support the achievement of company business goals and objectives as assigned by the Maintenance Manager. The Equipment Specialist will supervise maintenance technicians as direct reports, developing all through problem solving and company policies. This position will support all plant technical/mechanical operations as well as any building/grounds maintenance required or needed.

Primary Responsibilities
1. Install and maintain production machines and the plant equipment. 
2. Assure the completion of special assignments designated by the Maintenance & Engineering Manager.
3. Manage the implementation and continuous use of the preventive maintenance program.
4. Perform simple machinist duties and responsibilities. 
5. Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines. 
6. Read and interpret equipment manuals and work orders to perform required maintenance and service. 
7. Diagnose problems, replace or repair parts, test and make adjustments.
8. Perform regular preventive maintenance on machines, equipment and plant facilities. 
9. Perform a variety of plumbing maintenance and carpentry functions. 
10. Use a variety of hand and power tools, electric meters and material handling equipment in performing duties. 
11. Detect faulty operations, defective material and report those and any unusual situations to proper supervision. 
12. Comply with safety regulations and maintain clean and orderly work areas. 
13. Work on special assignments designated by the Maintenance Manager & Engineers
14. Assist in the relief of plant technical staff during absences from the plant.
15. Research, design and implement new technology to improve equipment performance

Apply Now More Info

Maintenance Technician

Charlotte MI (43 miles)

Base Pay: $20

Maintain all plant equipment including production machinery and facilities equipment. Ensure a safe, clean work environment with a strong focus on...

Maintain all plant equipment including production machinery and facilities equipment. Ensure a safe, clean work environment with a strong focus on quality and productivity.

MAJOR DUTIES AND RESPONSIBILITIES:

  • Perform daily, weekly and monthly preventive maintenance on all plant equipment.
  • Perform trouble shooting, problem solving and countermeasure activities on all production and facility equipment.
  • Dismantle machines or equipment using hand tools or power tools to examine parts for defects and repair or replace.
  • Complete daily maintenance of status reports.
  • Work with and coordinate any contractor activity.
  • Complete a daily machine start-up and warm-up process.
  • Complete production start-up quality audits.
  • Provide training, guidance, and support to team members with machine operations.
  • Proficiency in applying SPC techniques to complement TQC operating philosophy (i.e., charting, problem solving, etc.)
  • Other duties as assigned.

ADDITIONAL KNOWLEDGE, SKILLS AND ABILITIES:

  • Experience in programming and troubleshooting PLC and SLC ladder logic using both RS Logix and 6200 series software.
  • Experience in operator interface programming such as panel views.
  • Familiarity with different servo controlled systems.
  • Ability to read and/or interpret engineering drawings (electrical, pneumatic, hydraulic, and mechanical)
  • Proficiency with computer aided drawing software, i.e. AutoCAD.
  • Ability to size electrical, pneumatic, and hydraulic circuits.
  • Strong verbal and written communication skills required.
  • Maintain strict confidentiality of any proprietary business-related information to which entrusted
  • Ability to work in a non-climate controlled area (where applicable)

Apply Now More Info

Forklift Operator

Grand Rapids MI (44 miles)

Base Pay: $12.00/hour

ResourceMFG is looking for Forklift Operators for 2nd shift openings at a snack food manufacturer in the downtown Grand Ra...

ResourceMFG is looking for Forklift Operators for 2nd shift openings at a snack food manufacturer in the downtown Grand Rapid, MI area! This position is temp to hire for the right candidates.

Hours: 2:45PM - 11:00PM

Pay: $12/hour

Apply Now More Info

Machine Operator

Grand Rapids MI (44 miles)

Base Pay: $12.00-$16.00/hour

ResourceMFG is looking for awesome candidates with Machine Operation experience for a Sheeter Operator position on all shi...

ResourceMFG is looking for awesome candidates with Machine Operation experience for a Sheeter Operator position on all shifts! This position is located in Grand Rapids, MI. It has the potential of becoming permanent for the right individuals.

Pay: $12.00-16.00, depending on experience

Hours: 2:45 PM - 11:00 PM

Job Qualifications:

  • High energy, can-do attitude with the ability to work with a sense of urgency
  • Flexibility with the ability to work long hours, nights, or weekends
  • Ability to stand or walk 8 hours a day

Apply Now More Info

Team Lead

Grand Rapids MI (44 miles)

Base Pay: 13.50

ResourceMFG is looking for a hard-working individual for a 1st shift Team Leader position for a dairy manufacturing company in the Grand...

ResourceMFG is looking for a hard-working individual for a 1st shift Team Leader position for a dairy manufacturing company in the Grand Rapids, MI area! This position has the potential of becoming permanent for the right candidate.

Hours: 5:00 AM - 2:00 PM

Pay: $13.50/hour

Responsibilities:

  • Maintain raw and production materials to ensure products are stocked for production needs
  • Lead the team in getting product finished in the safest, highest quality, most efficient way
  • Understand machine start up settings; observe machine operating function to ensure that machine is operating correctly and troubleshoot when machines are down
  • Comply/verify accuracy of each finished case and skid labels
  • Train, coach and communicate all production line employees
  • Conduct employee performance reviews
  • Responsible for shift schedule

Apply Now More Info

Machine Operator

Grand Rapids MI (44 miles)

Base Pay: 12.00

We are looking for skilled Machine Operators for 1st Shift openings for a dairy manufacturer in the Grand Rapids, MI area! These pos...

We are looking for skilled Machine Operators for 1st Shift openings for a dairy manufacturer in the Grand Rapids, MI area! These positions have the potential of becoming permanent for the right candidates.

Hours: 5:00 AM - 3:00 PM

 

Pay: $12/hour

Responsibilities:

  • Work with the team to package product
  • Record temperature, weights, etc.
  • Comply/verify accuracy of each finished case and skid labels

Apply Now More Info

Welder

Litchfield MI (46 miles)

Base Pay: 13.00

We are looking for welders that have experience and can travel to Litchfield MI.  This position is responsible for several types of weld prepa...

We are looking for welders that have experience and can travel to Litchfield MI.  This position is responsible for several types of weld preparation, welding and weld finishing operations to manufacture product to customer drawings, specifications, or other forms of instruction.

Essential Functions

  • Proficient in assigned welding techniques.
  •  Interpretation of mechanical drawings, including weld symbols.
  •  Knowledge of wire and filler materials applications for various steel alloys and aluminum.
  •  Working knowledge of the use of fixtures and weld set up parameters (amps, volts, etc.).
  •  Conventional and precision measuring instruments.
  •  Process inspection, certification and documentation.
  •  Welding equipment maintenance.
  •  Finishing grinding applications using manual and power tools.
  •  Safety and Housekeeping.
  •  Other duties as assigned by the area Lead.

Benefits through ResourceMFG to include: 

  • Paid Weekly
  • Insurance Options 
  • 90 days hire in with good attendance and job performance.
  • Medical: Major Medical, Wellness and Basic plans to choose from
  • Dental
  • Vision
  • Term Life 
  • Short Term Disability
  • Weekly Pay
  • Preferred Customer Discounts with AT&T and Verizon

Apply Now More Info

Welder

Litchfield MI (47 miles)

Base Pay: 14.00

We are hiring welders in Litchfield, MI.  This position would be responsible to weld metal components together using MIG welding equipment to...

We are hiring welders in Litchfield, MI.  This position would be responsible to weld metal components together using MIG welding equipment to fabricate or repair products.

 

Essential Job Duties & Responsibilities include the following:

 

  1. Weld to the specifications called out from print.
  2. Maintain or excel the speed of an existing production weld line. 
  3. Weld an accurate rendering of a customer’s part from print.
  4. Performs related tasks such as thermal cutting and grinding.
  5. Maintain welder equipment, set-up welding machine, changing tip and or nozzles as necessary.
  6. Changing over wire for welding needs.
  7. Perform tuning on heat and or wire as needed.

 

Other duties may be assigned.  To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Our Company Offers

  • Paid Weekly
  • Insurance Options
  • 90 day hire in with good attendance and job performance.  
  • Medical: Major Medical, Wellness and Basic plans to choose from
  • Dental
  • Vision
  • Term Life
  • Short Term Disability
  • Weekly Pay
  • Preferred Customer Discounts with AT&T and Verizon

 

 

 

Apply Now More Info

Quality Control

Grand Rapids MI (47 miles)

Base Pay: $12.50/hour

A PPE manufacturer in the Grand Rapids, MI area is looking to add a Quality Control Inspector to their 1st shift. This pos...

A PPE manufacturer in the Grand Rapids, MI area is looking to add a Quality Control Inspector to their 1st shift. This position has the potential of becoming permanent for the right individual.

Hours: Mon-Fri, 8:30 AM - 5:00 PM, no OT

Pay: $12.50/hour

Responsibilities:

  • Performs analyses of raw materials, in-process samples, and finished goods according to established procedures, to determine conformance to accepted specifications. Included, but not limited to, physically wearing the inspection sample to feel for comfort, defects, and inconsistencies
  • Ensures delivery against QA goals and objectives by meeting commitments and coordinating overall quality assurance schedule
  • Achieves quality assurance operational objectives by contributing information and analysis to strategic plans and reviews; preparing and completing action plans; implementing production, productivity, quality and customer-service standards; identifying and resolving problems; implementing change
  • Validates quality processes by establishing product specifications and quality attributes; measuring production; documenting evidence

Apply Now More Info

Machine Operator

Grand Rapids Township MI (47 miles)

Base Pay: $13.00/hour

A local coffee and nut company is looking for hard-working individuals with Vertical Form, Fill and Seal Machine Operation experience for...

A local coffee and nut company is looking for hard-working individuals with Vertical Form, Fill and Seal Machine Operation experience for a 1st shift position in the downtown Grand Rapids, MI area! This position has the potential of becoming permanent for the right candidate!

Hours: 6:00AM - 2:00 PM

Pay: $13-$16/hour

Responsibilities:

  • Set-up and operate multiple packaging machines to ensure accurate weights
  • Perform basic preventative maintenance on packaging machines

Apply Now More Info

Newsprint Press Operator

Grand Rapids Township MI (49 miles)

Base Pay: 13.00

ResourceMFG is looking for a hard-working individual for a Press Operator position in the Walker, MI area! Pay: $13/hour Responsibil...

ResourceMFG is looking for a hard-working individual for a Press Operator position in the Walker, MI area!

Pay: $13/hour

Responsibilities:

  • Install plates on press. Set register, color registration and correct ink and water balance to ensure best color quality possible for each press run
  • Collaborate with press crew and all necessary production employees to ensure smooth and efficient press runs while adhering to all safety regulations and operating procedures
  • Measure quality and adjust equipment using tools and instruments
  • Operate press folder
  • Maintain acceptable waste goals necessary to ensure efficient press operations
  • Perform general maintenance and cleanup of press
  • Troubleshoot press problems. Communicate any issues to Foreman
  • Maintain plate making equipment as necessary
  • Set up and run reels for all press runs during the shift. Make changes to reels based on press run schedule. Apply proper paster pattern to newsprint rolls loaded onto the press

Apply Now More Info

Assembler

Goshen IN (50 miles)

Base Pay: 11.00

Resource MFG is looking for dependable assembly associates to work in a fast paced environment. Prior experience with air and hand tools is a plus....

Resource MFG is looking for dependable assembly associates to work in a fast paced environment. Prior experience with air and hand tools is a plus. Ability to read a tape measure required. Any furniture or upholstery background quite helpful. These positions are in Goshen, IN.

**1st shift

**6am - 230pm

**$11.00 per hour

Apply Now More Info

Machine Operator

Grand Rapids MI (51 miles)

Base Pay: $12.00/hour

ResourceMFG is looking for a hard-working candidate for a 2nd Shift Machine Operator position in the Grand Rapids, MI area. This position...

ResourceMFG is looking for a hard-working candidate for a 2nd Shift Machine Operator position in the Grand Rapids, MI area. This position has the potential of becoming permanent for the right candidate!

Pay: $12/hour

Hours: 3:00PM - 1:30AM

Responsibilities:

  • Determining sequence of operations by studying blueprints, specifications and work orders
  • Prepare machine for proudction
  • Regulate machining by setting and adjusting controls
  • Produce parts by locating and marking reference points on work piece with ruler, compass, template, etc.; positioning or aligning work piece against stops and guides or die; operating equipment
  • Maintain specifications by observing operations; detecting malfunctions; inspecting parts; adjusting controls; replacing dies
  • Resolve production problems by altering process to meet specifications; notifying supervisor to obtain additional resources
  • Ensure operation of equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs
  • Maintain stock inventory by checking stock to determine amount available; anticipating needed stock; placing and expediting orders for stock; verifying receipt of stock

Apply Now More Info

Assembler

Portland MI (53 miles)

Base Pay: 10.89

ResourceMFG is currently seeking assemblers for a company located in Portland, MI. This company stamps and assembles automotive interior armrest co...

ResourceMFG is currently seeking assemblers for a company located in Portland, MI. This company stamps and assembles automotive interior armrest console brackets.

Job Type: Full-time, temp-to-hire

Shift: 2nd shift 3PM-11PM

Pay: $10.89/hr

Apply Now More Info

Assembler

Portland MI (53 miles)

Base Pay: 10.59

ResourceMFG is currently seeking assemblers for a company located in Portland, MI. This company stamps and assembles automotive interior armrest co...

ResourceMFG is currently seeking assemblers for a company located in Portland, MI. This company stamps and assembles automotive interior armrest console brackets.

Job Type: Full-time, temp-to-hire

Shift: 3rd 11-7, train on 1st shift 7-3

Pay: $10.59/hr

Apply Now More Info

Maintenance Technician

Eaton Rapids MI (53 miles)

Base Pay: $17.60 - $31

ResourceMFG is seeking Maintenance Technician Candidates in the Eaton Rapids, MI area. Candidates must be open to off shifts, and will be responsib...

ResourceMFG is seeking Maintenance Technician Candidates in the Eaton Rapids, MI area. Candidates must be open to off shifts, and will be responsible for the repair, maintenance, and improvement all equipment associated with the production of die cast parts.  This includes, but is not limited to: die cast machines, presses, robots, electric melting furnaces/pre-heaters, CNC’s, and other related assembly equipment.

KEY RESULT AREAS OF THIS POSITION:

  • Safe working environment achieved and maintained.
  • Demonstrate a good, systematic, and logical approach to trouble-shooting problems.
  • Demonstrate a good working knowledge of hydraulic theory.
  • Demonstrate a good working knowledge of electrical theory.
  • Demonstrate a good working knowledge of pneumatic theory.
  • Demonstrate the ability to read and understand various prints, schematics, and drawings.
  • Demonstrate a good working knowledge of Allen-Bradley PLC’s (5, SLC500, 5000).
  • Demonstrate a good working knowledge of Motoman and ABB Robots (Trouble-shoot and programming)
  • Demonstrate a good working knowledge of rigging, and the use of heavy lifting equipment.
  • Demonstrate the ability to perform general fabrication and welding proficiently. 

ACTIVITIES AND TASKS:

  • Communicate, clearly, with manufacturing department and maintenance team on equipment status and repairs required.
  • Complete work orders as assigned by Team-leader/Function-leader.
  • Perform weekly, monthly, yearly PM’s per the CMS.
  • Fill out work orders for work completed.
  • Diagnose equipment issues and make the appropriate repairs in a timely manner
  • Recommend permanent solutions to re-occurring equipment issues.
  • Recommend additional spare parts if required to maintain equipment.
  • Maintain 5-S standards for maintenance area.
  • Enroll and complete the required Meridian apprenticeship program in the allotted time frame. (If required)
  • Willing to work off-shifts and required overtime.

Apply Now More Info