Questions? 1-877-404-8449

This job is no longer available, but here are some other jobs:

Maintenance Electrician

Kinston NC

Base Pay: BOE

ResourceMFG in Kinston, NC has a direct hire position for an experienced Electrical Maintenance for a well established global manufacturing company...

ResourceMFG in Kinston, NC has a direct hire position for an experienced Electrical Maintenance for a well established global manufacturing company.

Perform a variety of electrical and maintenance repair duties primarily pertaining to plant equipment, operation of creels, cutters, balers, winders, crimpers along with boiler room equipment. Responsible for planning and scheduling own work and perform off-hour emergency work.

Duties require the use of electrical meters, voltmeters, ammeters, wiring diagrams, schematics and specifications, along with the use of hand and power tools, grinders, welders, cutting torch, brazing equipment and the like.

Perform electrical preventative maintenance on creels, crimpers, cutters, balers, winders and similar equipment. Clean and lubricate machines; repair or replace worn or damaged parts such as belts, gears, drives, shafts, bearings, rollers, pins, etc. Clean and rest stuffing box clearances, crimper rollers, shear pins, etc., to fairly close tolerances. Set limit switches, changes bearings and set operating clearances on switches. Follow specifications, wiring diagrams and sequentially check to determine proper performance characteristics of equipment. Check voltages, make electrical adjustments, check and adjust interlock controls and set switching devices.

Check boiler room equipment such as pumps, compressors, steam equipment and various auxiliary equipment. Perform maintenance tasks such as repairing lines, pipes, control valves and automatic-control mechanisms, etc. Check air-conditioning and heating equipment, replace filters, repair vents, fans and switches, etc.

Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to insure compliance with codes. Remain in compliance with current National Electric Code and local regulations.

Plan layout and installation of electrical wiring, equipment and fixtures, based on job specifications and local codes.

Work from ladders, scissor lifts, and on roofs to install, maintain or repair electrical wiring , equipment and fixtures.

Maintain work areas and equipment in a clean and orderly manner.  Observe and comply with company and safety rules.  Maintain required records and make reports.

Apply Now More Info

Assembler/Cabinet Maker 2

Kinston NC (2 miles)

Base Pay: 9.50

ResourceMFG has immediate openings in the Washington area for basic level assembly positions. Assembler is able to build simple cabinets, may work...

ResourceMFG has immediate openings in the Washington area for basic level assembly positions.

  • Assembler is able to build simple cabinets, may work on project with guidance.
  • Work on process line to include prepping of parts, sanding, puttying, cleaning and packaging of cabinets, fixtures or graphics.
  • Specific duties include obtaining pre-kitted stock and pre-measure components to ensure part cut accuracy.
  • Verify measurement to order parameters. Use woodworking machines to create finished edges, boring or routing holes.
  • Apply a finish laminate. Able to read prints and instructions in English as well as speak and write.
  • Able to operate all power and pneumatic power tools as well as hand tools.

Apply Now More Info

Quality Technician

KINSTON NC (4 miles)

Base Pay: 11.48

This Quality Tech position will support 1st and 2nd shift. Anticipated work hours are 12pm till 8pm, Monday-Friday with weekend coverage as needed....

This Quality Tech position will support 1st and 2nd shift. Anticipated work hours are 12pm till 8pm, Monday-Friday with weekend coverage as needed. Please submit resume.  1 YR. QC EXPERIENCE IS REQUIRED.

  • Audit products in assigned work areas.
  • Report/flag quality issues immediately to the area Lead and Supervisor
  • Assist in the training of operators what is acceptable and what is not to produce a quality product.
  • Verify quality of the product as it is being made
  • Cross train in other areas in the department to be proficient in all jobs on the production line.
  • Responsible for utilizing proper personal protection equipment when required.
  • Report/flag equipment problems/concerns immediately to the area Lead and Supervisor.
  • Perform regular checks on the product and the process to reduce variables and inconsistency.
  • Be a hands-on team player.
  • Conform to site health and safety procedures as appropriate.
  • Other duties as assigned.

Apply Now More Info

Muller

KINSTON NC (4 miles)

Base Pay: 9.45

ResourceMFG has an opening for a MULLER. The Muller position installs mullion plate to attach windows together, may also be required to add fi...

ResourceMFG has an opening for a MULLER. The Muller position installs mullion plate to attach windows together, may also be required to add finishing pieces to unit to complete.

This a temp-to-hire position. 1ST & 2ND SHIFT AVAILABLE.

Apply Now More Info

Lead Person

KINSTON NC (4 miles)

Base Pay: 14.40

SUMMARY: Direct operations of employees on a window production line, ensuring that safety, housekeeping, and quality policies and procedures are ad...

SUMMARY: Direct operations of employees on a window production line, ensuring that safety, housekeeping, and quality policies and procedures are adhered to while achieving hour/unit and yield goals. 1st/2nd shift avail.

PRIMARY FUNCTIONS:

  • Ensure all employees are following all safety policies and procedures set forth by the management team
  • Actively provide feedback on opportunities for improving safety-related policies and procedures
  • Ensure and drive 5S principles and housekeeping standards within area of responsibility
  • Ensure all employees are following all quality policies and procedures set forth by the management team
  • Hold employees accountable for hitting productivity targets
  • Training of new hires on specific area of operation; cross-training of employees as needed to minimize production interruptions and ensure quality compliance
  • Communicate issues to appropriate personnel on assigned shift (supervisor, maintenance, human resource, etc) and to adjacent shift
  • Communicate opportunities for improvement in operations
  • Support and sustain all continuous improvement activities within area of responsibility
  • Complete administrative duties as assigned (process monitors, start of shift checklists, safety audits, etc.)

Apply Now More Info

Maintenance Technician

Snow Hill NC (14 miles)

Base Pay: DOE

ResourceMFG has a position open in Snow Hill, NC for a Maintenance Technician.  Pay is dependent upon experience starting at mid 40's. This i...

ResourceMFG has a position open in Snow Hill, NC for a Maintenance Technician. 

Pay is dependent upon experience starting at mid 40's.

This is a temp to hire position and an updated Resume is required.

 

Job Duties and Responsibilities:

-Work with engineering, management, other maintenance techs, shop personnel, and vendors to complete all operations required for the repair and maintenance of equipment.

-Performs preventative and periodic maintenance tasks as required.

-Updates, monitors, and maintains Maintenance Logs.

-Operates and maintains any equipment needed to safely complete all job level maintenance assignments.

-Frequently completes assignments independently and routinely assists Maintenance Manager.

-Demonstrates a high level of knowledge and ability in basic skills needed to safely complete maintenance assignments.

-Understands safety procedures.

-Works with supervisors/management to minimize downtime of manufacturing        equipment.

-Assists operations in completion of minor facility renovation projects as needed.

-Performs other assignments as requested or as business needs require.

Apply Now More Info

Assembly

Snow Hill NC (14 miles)

Base Pay: 10.50

We have Assembly positions open in Snow Hill, NC. This is a first shift position. Hours are 7:00 AM - 5:30 PM, Monday - Thursday. Overtime will be...

We have Assembly positions open in Snow Hill, NC. This is a first shift position. Hours are 7:00 AM - 5:30 PM, Monday - Thursday. Overtime will be required as needed.

 

Job Duties and Responsibilities: 

  • Performs electro-mechanical assembly or sub-assembly (slightly complex).
  • Must be able to read blueprints. 
  • Installs winding element connection using swedge assembly methods. 
  • Stacking
  • Must be able to follow written instructions.
  • Connects lid subassembly to single and/or multiple winding packs in the correct terminal configuration.
  • Cuts, terminates, solders, insulates and/or crimps wire ends and terminals per specification. 
  • Insulates product using epoxy or polyurethane per specifications. 
  • Solders/brazes close cooling coil connections. 
  • Follows detailed assembly instructions, processes & procedures. 
  • Accurately completes production shop packet information.
  • Performs other assignments as requested or as business needs require.

Apply Now More Info

Machinist

Goldsboro NC (25 miles)

Base Pay: 11.00

Job Description: This person will perform entry level operations of the CNC machines that create parts and products, Loads raw materials into CNC m...

Job Description: This person will perform entry level operations of the CNC machines that create parts and products, Loads raw materials into CNC machines. Performs general quality inspection of materials before loading into machine. Performs basic inspection of machined products to ensure product meets R&D specifications. Reports and describes errors or problems to lead or CNC Programmer. Keeps equipment and work area clean and organized. Follows department safety rules and operating procedures. Must have a can do attitude and willing to learn, there is a lot of room for growth as this is a temp to hire position.

Apply Now More Info

Food Service-Butterball

Mount Olive NC (28 miles)

Base Pay: 8.75

Part time position in Mt Olive. General clean up and dishwasher Clean up station and take care of leftover food. Stock inventory appropriately Main...

Part time position in Mt Olive.

General clean up and dishwasher

Clean up station and take care of leftover food.

Stock inventory appropriately

Maintain a positive and professional approach with coworkers and customers

 

Apply Now More Info

Master Craftsman Cabinet Maker

Washington NC (36 miles)

Base Pay: 15.00

ResourceMFG has immediate openings in the Washington area for Master Craftsman Cabinet Makers. These experts are capable of building fixtures from...

ResourceMFG has immediate openings in the Washington area for Master Craftsman Cabinet Makers. These experts are capable of building fixtures from start to finish. Should be able to work through building from any blueprint, sketch or instruction within set time frames. Experienced in using all woodworking equipment and machine part and fabricating to completion. The successful candidates should be able to work with very little supervisor and have a sense of urgency in completion of tasks and product. Team player attitude. 

Apply Now More Info

Loader/Unloader

Rocky Mount NC (47 miles)

Base Pay: 10.32

ResourceMFG has openings for warehouse workers in the Rocky Mount/Tarboro area. Load and Unload Trucks and load conveyor belt with boxes. This is 8...

ResourceMFG has openings for warehouse workers in the Rocky Mount/Tarboro area. Load and Unload Trucks and load conveyor belt with boxes. This is 8 p.m. - 7:14 a.m., Friday, Saturday, Sunday, Monday.

Apply Now More Info

Maintenance Technician

Zebulon NC (57 miles)

Base Pay: $18-23/hr

Resource MFG is currently searching for Qualified Maintenance Technicians in the Zebulon, NC Area.   MAIN DUTIES /RESPONSIBILITIES OF MAI...

Resource MFG is currently searching for Qualified Maintenance Technicians in the Zebulon, NC Area.

 

MAIN DUTIES /RESPONSIBILITIES OF MAINTENANCE TECH

Responsible for maintenance and repair of machinery, equipment and facilities. Assisting with set up and to maintain or repair mechanical equipment such as engines, motors, pneumatic tools, conveyor systems and production machines or equipment 

  • Maintain and repair machinery and mechanical equipment to insure safe operation and productive. 
  • Make mechanical or electrical adjustments.  Perform changeovers on some extruders and peripheral equipment. 
  • Perform routine preventive maintenance. 
  • Record maintenance, problems, and repairs in online system. 
  • Clean work area to ensure a safe and productive environment
  • Able to lift/move up to 50 pounds 
  • Must read blue prints, diagrams, part drawing and schematics. 
  • Lean/Six sigma is a PLUS

 

ALL QUALIFIED CANDIDATES MUST SUBMIT RESUME TO BE CONSIDERED FOR POSITION 

 

 

Apply Now More Info

Maintenance Mechanic Apprentice

Zebulon NC (57 miles)

Base Pay: 15.00-18.00

Resource MFG is currenlty recruiting for an Apprentice Maintenance Mechanic position in the Zebulon, NC area Maintenance Technician 1:  Main...

Resource MFG is currenlty recruiting for an Apprentice Maintenance Mechanic position in the Zebulon, NC area

  • Maintenance Technician 1: 
  • Maintain and repair machinery and mechanical equipment, such as engines, motors, pneumatic tools, conveyor systems, and production machines and equipment. 
  • Make mechanical or electrical adjustments. 
  • Perform changeovers on some extruders and peripheral equipment.
  • Perform routine preventive maintenance.
  • Record maintenance, problems, and repairs in online system. 
  • Clean work area to ensure a safe and productive environment.
  • Seek assistance of more experience technician for difficult and complex jobs.
  • Perform other duties as assigned.

Apply Now More Info